SAP DB2 backup issue

Hi All,
I am trying to schedule db2 oline backup through db13 (Database base backup Vendor Library) facing below error. Please advise on below issue.
05.05.2015
03:20:06
Backup_TSM:Parameter UTIL_IMPACT_PRIORITY has been set to "UTIL_IMPACT_PRIORITY 2"
05.05.2015
03:20:06
Backup_TSM:Parameter DEDUP_DEVICE has not been set
05.05.2015
03:20:06
Backup_TSM:Parameter OPTIONS has not been set
05.05.2015
03:20:06
Backup_TSM:Parameter NUMBER_SESSIONS has been set to " 1"
05.05.2015
03:20:06
Backup_TSM:System is deactivated in system configuration; nojob dispatching possible
05.05.2015
03:20:06
Exception CX_DB6_CON in program CL_DBA_JOB====================CP / CL_DBA_JOB====================CM00K at line Warning with retu
05.05.2015
03:20:06
Backup_TSM:Exception CX_DBA_JOB in class CL_DBA_JOB method IF_DBA_JOB~RUN line 11
05.05.2015
03:20:06
Backup_TSM: Kernel Error ID:
05.05.2015
03:20:06
Backup_TSM: WP ID: 12
05.05.2015
03:20:06
Backup_TSM: WP PID: 24051918
Regards,
Raj

Hi Hope the below Url and stuff might help you. http://scn.sap.com/thread/3154248 Within TSM there is an "Options" file that has default parameters such as , SERVER NAME, COM/METHOD, which is TCPIP, TCPPORT, TCPSERVERADDRESS, NODENAME, PASSWORDACCESS , etc. When TSM runs, the first thing it does is read the options file, otherwise the reault is the dump you received. Your best bet is find the directory for TSM, the options file is in there, then add your system information accordingly. You can find sample options files out there to give you some guidance. Cheers, Sharma

Similar Messages

SAP DB2 performance issues

Hello everyone,
I'm new in db2 for LUW and I have the following questions:
How can I check the total memory DB2 is using? I have STMM configured. I have two parameters DATABASE_MEMORY (automatic) and INSTANCE_MEMORY? Do I need to sum them?
I have many secuencial reads in SM50, any advices about how to proceed? (for standard/non standard reports/tables). In ST03N I have High Database time (almost 60% of the response time) any advices about how to proceed?
Any useful link will be appreciated.
Regards,
JAM
System information: NW 7.0 EHP1 / DB2 9.7 FP4 / AIX 6.1

Dear J A,
Refer below links:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60fe97e1-12e3-2c10-2f8d-ccb9a5450a99?overridelayout=t…
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/5cb5ed706d254a8186256c71006d2e0a/abee91d23ca95e46862576870078ffd1/$F…
Thanks & Regards,
V Srinivasan

SAP DB2 TSM expired backup

Hi Gurus,
We are using TSM to taking SAP online backup weekly basis.Storage team wants to delete some old backup from TSM due to space constrain.Please let us know how to delete the old backup in TSM from DB2 level also provided the configuration details below,
Number of database backups to retain   (NUM_DB_BACKUPS) = 12
Recovery history retention (days)     (REC_HIS_RETENTN) = 60
Auto deletion of recovery objects    (AUTO_DEL_REC_OBJ) = OFF
Also when i execute LIST HISTORY BACKUP ALL FOR DB <SID>" Showing old backup from 29th June. I able to see Timestamp+Sequence from 20140629043003001 - 20140629043003012. Why same backup image showing 12 sequence.Please help me on this.
Number of matching file entries = 193
Op Obj Timestamp+Sequence Type Dev Earliest Log Current Log Backup ID
B D 20140629043003001   N    O S0111900.LOG S0112016.LOG
Regards,
MK

Hi,
Please let me know the use of below parameter.
Number of database backups to retain   (NUM_DB_BACKUPS) = 12
Recovery history retention (days)     (REC_HIS_RETENTN) = 60
Auto deletion of recovery objects    (AUTO_DEL_REC_OBJ) = OFF
Also how to delete expired backup in TSM.
Regards,
MK

SAP DB2 migration to 9.5 having issues after database restore

Hello All,
We are migrating our database from version DB2 8.2 to 9.5. We have successfully migrated our environment. Now we are trying to restore the old backup of the database (8.2) to the migrated instance. The restore worked fine but it asked us to migrate the database. When we run the MIGRATE DATABASE command it returns the following error.
SQL1704N Database migration failed. Reason code "17". (SYSCAT tablespace space not enough)
But to extend the tablespace we are not able to connect to the database. We get the following error if we try to connect.
SQL5035N The database requires migration to the current release.
So we cannot run either command. Can anyone please suggest how to resolve this issue?
Deepak

Hello Malte,
We are using the below commands for the backup and restore.
The backup was taken when the database was still at 8.2 version
db2 "backup database QA2 online to file1,file2,file3,file4,file5,file6,file7,file8,file9,file10,file11,file12 with 8 buffers parallelism 4 without prompting"
db2 restore db QA2 from /backupold/QA2-offline taken at 20090807001234 redirect
db2 "ALTER TABLESPACE SYSCATSPACE ADD (FILE '/sapdata8/SYSCATSPACE.container002' 1000000 K) ON NODE ( 0 )"
db2 "ALTER TABLESPACE SYSCATSPACE ADD (FILE '/sapdata8/SYSCATSPACE.container003' 1000000 K) ON NODE ( 0 )"
db2 restore db QA2 continue
db2qa2> db2 restore db QA2 continue
SQL1651N The request cannot be executed because the DB2 server version does
not support this functionality.
Hope this helps you provide soem inputs.
Thanks
Deepak

来自IBM的培训邀请函: DB2 LUW/SAP Admin workshop -- SAP环境下的DB2数据管理

为了帮助SAP的DB2客户提升SAP环境下DB2数据库的管理能力，我们代表IBM公司邀请您参加由IBM公司提供的《DB2 DB2/SAP Admin workshop -- SAP环境下的DB2数据管理》培训。此次免费培训将在北京（4月12日－4月15 日）和广州（4月19日－4月22 日）举办。授课对象为具有一定SAP NW经验，希望进一步深入了解DB2 LUW，和在SAP环境下使用DB2的系统管理员和技术顾问。培训为每位学员提供实验环境，其授课目标为：
u2022 了解DB2的基础知识；
u2022 使用不同的SAP和DB2工具，在SAP环境下通过数据监控，性能调优，备份及恢复等操作，完成对数据库的完整管理；
u2022 了解DB2的独有特性，如DPF，MDC及数据压缩，与SAP应用进行深入整合；
u2022 了解不同的数据高可用方案设置；
u2022 掌握基本问题分析能力。
具体日程安排如下：
Day 1
1.1    DB2 & SAP Overview
1.2    DB2 Product Overview
1.3    Installation
1.4    Accessing DB2
1.5    Database Objects
1.6    DB2 Security
1.7    Client Server Connectivity
1.8    DB2 Configuration
1.9    Storage Structures
1.10   DB2 Process Model
1.11   DB2 Memory Model
1.12   SQL Processing
Day 2
2.1    Log File Management
2.2    Backup and Recovery
2.3    High Available Database
Day 3
3.1    Database Partitioning Feature (DPF) and SAP BI
3.2    Storage Layout
3.3    MDC and SAP BI
Day 4
4.1    Deep Compression
4.2    Performance Monitoring and Tuning
4.3    Ongoing Operations - Regular DBA tasks
4.4    Problem Analysis
如您决定参加培训，请填写以下回执表在2010年3月31日之前通过Email或传真予以确认。
回执表
公司名称：___________________________________________________________
地址：___________________________________________________________
姓名:                                            职务:
Email:                                          电话:
姓名:                                            职务:
Email:                                          电话:
选择上课地点：（）北京，（）广州
联系人郭亦群 Guo Yi Qun
Tel: 86-10 63614570         Email: guoyiq＠cn.ibm.com
Mobile: 86-13701235290

Hi Jin-Chong
many thanks for you help. But the problem still persists.
1. We don't have $ODBCINI. There are no conection issues at all. Connection is performed by IBM Data Server Client (db2client) db2 connect to ...
2. For which stored procedures do we need to apply these Grants? We manually exported the available historical data from the TrendingDB to CSV files, connected to the database server with db2 connect... (on the app server), imported these CSV with the same user, it all went smoothly. We granted some DML's to the database user. also granted DBADM and SECADM to the database user as well, just to be sure there are no permission issues.
The Error message seems to indicate There is a problem finding the correct driver for monitoring database, since it says,
      networkLayer    "ODBC"
        DBMS    "DB2"
com.sap.connectivity.cs.core.CSError: Specified RDBMS is invalid : DB2.
- Maby IBM Data Server Client (db2client) is not supported for monitoring database at all?
- Do we have to install additional DB2 clients like DB2 CLI driver or ODBC client instead?
Thanks in advance
Sem

Help in DB2 backup problem

Dear experts,
your help required.
i'm new to DB2, i can handel MS_sql.
recendlty my company is running SAP on DB2 (windows 2003 server)
i'm unbale to find the init<SID>.db2/db6 to check and adjust the parameters.
if there is any configuration file (to adjust/configure tape drive) please let me know .
main 2 problems are :-
i need to archive the log (now it is 80%) to disk and tape.
*it is very help full,if you can give the syntax that has to typed in command line.
how to increase the size of archive log ?
how important it is to preserve the archived log ?
*how to put the label for archived log to disc or tape drive ?
and about tape drive backup:-
*i'm unable to take backup.
here is the steps that i had tried, to take backup or initialize the tape in drive.
H:\IBM\SQLLIB\BIN>db2 backup db to
.\tape0
SQL0104N An unexpected token "
.\tape0" was found following "TO". Expected
tokens may include: "USER". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>
H:\IBM\SQLLIB\BIN>db2 backup db to
.\tape0
SQL0104N An unexpected token "
.\tape0" was found following "TO". Expected
tokens may include: "USER". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>db2 rewind tape
.\tape0
SQL0104N An unexpected token "
.\tape0" was found following "TAPE".
Expected tokens may include: "END-OF-STATEMENT". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>db2 REWIND TAPE
.\TAPE0
SQL0104N An unexpected token "
.\TAPE0" was found following "TAPE".
Expected tokens may include: "END-OF-STATEMENT". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>db2 initialize tape
.\TAPE0
SQL0104N An unexpected token "
.\TAPE0" was found following "TAPE".
Expected tokens may include: "END-OF-STATEMENT". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>LOGARCHMETH1
'LOGARCHMETH1' is not recognized as an internal or external command,
operable program or batch file.
H:\IBM\SQLLIB\BIN>db2tapemgr
Parameter error. Reason: "DBT2120N No operation is specified.".
Incorrect syntax. Correct the syntax and reissue the command.
db2tapemgr [DATABASE database-alias]
[ON DBPARTITIONNUM db-partition-number]
{{{{STORE | DOUBLE STORE}[Store-Option-Clause]|
RETRIEVE [Retrieve-Option-Clause]|
SHOW TAPE HEADER tape-device}
[USING blocksize][EJECT]}|
EJECT TAPE tape-device|
DELETE TAPE LABEL tape-label|
QUERY [For-Rollforward-Clause]} [TRACE]
Store-Option-Clause:
ON tape-device [TAPE LABEL tape-label]
[ALL LOGS|n LOGS][FORCE]
Retrieve-Option-Clause:
{[For-Rollforward-Clause]
FROM tape-device[TO directory]|
{ALL LOGS|LOGS n TO m}
FROM tape-device[TO directory]|
HISTORY FILE
FROM tape-device TO directory }
For-Rollforward-Clause:
FOR ROLLFORWARD
TO {END OF LOGS|isotime [USING LOCAL|GMT TIME]}
[USING HISTORY FILE history-file]
DBT2008N db2tapemgr failed with errors.
H:\IBM\SQLLIB\BIN>
H:\IBM\SQLLIB\BIN>db2tapemgr db prd store on
.\tape0
DBT2065I Using database partition "NODE0000".
DBT2071I Using the automatic generated tape-label "PRD20070712193141".
Scanning history.
DBT2016I No log files found for processing.
DBT2006I db2tapemgr completed successfully.
H:\IBM\SQLLIB\BIN>
i request all experts to help me out in this basic step/configuration.
it would be very help full to the freshers.
Thanking you all,
by
Raghav

Dear experts,
your help required.
i'm new to DB2, i can handel MS_sql.
recendlty my company is running SAP on DB2 (windows 2003 server)
i'm unbale to find the init<SID>.db2/db6 to check and adjust the parameters.
if there is any configuration file (to adjust/configure tape drive) please let me know .
main 2 problems are :-
i need to archive the log (now it is 80%) to disk and tape.
*it is very help full,if you can give the syntax that has to typed in command line.
how to increase the size of archive log ?
how important it is to preserve the archived log ?
*how to put the label for archived log to disc or tape drive ?
and about tape drive backup:-
*i'm unable to take backup.
here is the steps that i had tried, to take backup or initialize the tape in drive.
H:\IBM\SQLLIB\BIN>db2 backup db to
.\tape0
SQL0104N An unexpected token "
.\tape0" was found following "TO". Expected
tokens may include: "USER". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>
H:\IBM\SQLLIB\BIN>db2 backup db to
.\tape0
SQL0104N An unexpected token "
.\tape0" was found following "TO". Expected
tokens may include: "USER". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>db2 rewind tape
.\tape0
SQL0104N An unexpected token "
.\tape0" was found following "TAPE".
Expected tokens may include: "END-OF-STATEMENT". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>db2 REWIND TAPE
.\TAPE0
SQL0104N An unexpected token "
.\TAPE0" was found following "TAPE".
Expected tokens may include: "END-OF-STATEMENT". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>db2 initialize tape
.\TAPE0
SQL0104N An unexpected token "
.\TAPE0" was found following "TAPE".
Expected tokens may include: "END-OF-STATEMENT". SQLSTATE=42601
H:\IBM\SQLLIB\BIN>LOGARCHMETH1
'LOGARCHMETH1' is not recognized as an internal or external command,
operable program or batch file.
H:\IBM\SQLLIB\BIN>db2tapemgr
Parameter error. Reason: "DBT2120N No operation is specified.".
Incorrect syntax. Correct the syntax and reissue the command.
db2tapemgr [DATABASE database-alias]
[ON DBPARTITIONNUM db-partition-number]
{{{{STORE | DOUBLE STORE}[Store-Option-Clause]|
RETRIEVE [Retrieve-Option-Clause]|
SHOW TAPE HEADER tape-device}
[USING blocksize][EJECT]}|
EJECT TAPE tape-device|
DELETE TAPE LABEL tape-label|
QUERY [For-Rollforward-Clause]} [TRACE]
Store-Option-Clause:
ON tape-device [TAPE LABEL tape-label]
[ALL LOGS|n LOGS][FORCE]
Retrieve-Option-Clause:
{[For-Rollforward-Clause]
FROM tape-device[TO directory]|
{ALL LOGS|LOGS n TO m}
FROM tape-device[TO directory]|
HISTORY FILE
FROM tape-device TO directory }
For-Rollforward-Clause:
FOR ROLLFORWARD
TO {END OF LOGS|isotime [USING LOCAL|GMT TIME]}
[USING HISTORY FILE history-file]
DBT2008N db2tapemgr failed with errors.
H:\IBM\SQLLIB\BIN>
H:\IBM\SQLLIB\BIN>db2tapemgr db prd store on
.\tape0
DBT2065I Using database partition "NODE0000".
DBT2071I Using the automatic generated tape-label "PRD20070712193141".
Scanning history.
DBT2016I No log files found for processing.
DBT2006I db2tapemgr completed successfully.
H:\IBM\SQLLIB\BIN>
i request all experts to help me out in this basic step/configuration.
it would be very help full to the freshers.
Thanking you all,
by
Raghav

SQL2025N error in db2 backup to SAMBA filesystem

Hi,
we have mounted an external disk in our linux system using SAMBA.
The db2 backup offline fails with this error message:
ERRORMESSAGE: Error -2025 in dmdb6bkp.c(1498):
SQL2025N An I/O error "4" occurred on media
"/BACKUP/APPS/HP2.0.db2hp2.NODE0000.CATN0000.20080425130153.001".
All users (sidadm, db2sid, sapsid ) have read/write permissions in the filesystem /BACKUP. This filesystem has not file size limited.
In the db2diag.log these errors appear.
2008-04-25-13.22.55.404908+120 E66661757G394      LEVEL: Info
PID     : 24014                TID : 2987636400 PROC : db2agent (HP2) 0
INSTANCE: db2hp2               NODE : 000         DB   : HP2
APPHDL : 0-7                  APPID: *LOCAL.db2hp2.080425112250
AUTHID : HP2ADM
FUNCTION: DB2 UDB, database utilities, sqlubSetupJobControl, probe:1391
MESSAGE : Starting an offline db backup.
2008-04-25-13.22.55.470988+120 E66662152G524      LEVEL: Warning (OS)
PID     : 24029                TID : 2987636400 PROC : db2med.24014.0 0
INSTANCE: db2hp2               NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloopenp, probe:150
MESSAGE : ZRC=0x860F0004=-2045837308=SQLO_DGFL "general failure (DD)"
          DIA8402C A disk error has occurred.
CALLED : OS, -, chmod                            OSERR: EPERM (1)
DATA #1 : File name, 62 bytes
/BACKUP/APPS/HP2.0.db2hp2.NODE0000.CATN0000.20080425132255.001
2008-04-25-13.22.55.476804+120 E66664510G892      LEVEL: Severe
PID     : 24014                TID : 2987636400 PROC : db2agent (HP2) 0
INSTANCE: db2hp2               NODE : 000         DB   : HP2
APPHDL : 0-7                  APPID: *LOCAL.db2hp2.080425112250
AUTHID : HP2ADM
FUNCTION: DB2 UDB, database utilities, sqlubMWResponse, probe:1041
MESSAGE : SQL2025N An I/O error "" occurred on media "".
DATA #1 : SQLCA, PD_DB2_TYPE_SQLCA, 136 bytes
sqlcaid : SQLCA     sqlcabc: 136   sqlcode: -2025   sqlerrml: 64
sqlerrmc: 4 /BACKUP/APPS/HP2.0.db2hp2.NODE0000.CATN0000.20080425132255.001
Versions:
Operating system : SUSE Linux Enterprise Server 10 (i586)
VERSION = 10
Database: DB6 9.1.3
SAP kernel: 7.0 patch 133
Best regards and thanks in advance.

Hi,
thanks for the suggestion, but all permissions are ok.
The db2 user is in usbshare group:
drwxrwxr-x 1 root usbshare 0 2008-04-28 10:00 APPS.
We cannot use NFS, the disk is not in a system, it's an external disk connected directly to the network.
Regards and thanks for the replies.
Sonia.
Edited by: Soporte IBM on Apr 28, 2008 1:22 PM
Finally we fixed this problem.
The problem was the user owner in this filesystem, the owner must be db2<sid>.
Edited by: Soporte IBM on Apr 29, 2008 4:03 PM

SAP Binaries Backup online or offline

Hello!
I woulld like to know, how to execute the regular SAP OS backup and have the following questions regarding this issue:
1) How often should I backup the SAP-Binaries-partition \usr\sap\...?
(daily, weekly, 1 times month)
2) Should the DB, SAP R/3 or some Services be stopped for this issue?
Do exist some file-locks avoiding offline backup of \usr\sap\... ?
3) What should be backuped from \usr\sap\...?
(trans, profiles)
Thank you very much!
regards
Thom

Hi Thom,
1). It's totally depend's on your system avilability(because you need to make the system offline), rest may be you can take OS level backup once in a month(standard practice with all the data centers).
2). Yes you better stop DB services and SAPOSCOL.
3). You can backup total dir structure and you better create one Emergency Repair Disk(ERD) in case of windows.
Regards,
Hari.
PS: Awarding points will get you some points.

Db2 backup on aix

Hi,
We are running SAP on AIX 5.3 AND db2 udb 8.2.3. We have taken full offline backup from OS level. e.g. /usr, /sapmnt, /usr/sap/trans, /home, /db2/<SID>, /db2/log_dir etc. May i restore the backup on another server without installing DB2 software? and run the SAP? or do we need to re-install DB2 & SAP again and then restore the database backup?
Please guide.
-SN

Hi Jennifer,
it is much easier and less error prone to do a system copy with the build in DB2 backup and restore commands. Copying DB2 by copying files from one server to the other should only be done by experienced DB2 administrators and in most cases there is no need to do this. For example using the wrong OS tools may create sparse allocated DB2 container files and can create unexpected error situations.
The DB2 V8 software installer on AIX uses the OS installer. The DB2 V8 software is installed under /opt and the /db2/db2<sid>/sqllib directory contains links to this directory. Therefore it is not enough to copy the /usr/sap ; /sapmnt and /db2 directories. With DB2 V8 the software installtion directory is fixed. With DB2 V9+ the software can be installed in any directory and as a default new SAPINST versions install the DB2 software under /db2/db2<sid> .
To do a cold copy of DB2 you may also need to use the db2inidb and db2relocated tools ( mostly used for split mirror copies ), especially if you want to rename your dbsid. You can find more information about those tools in the DB2 docu. The SAP utility brdb6brt ( note 867914 ) may also provide some help.
Regards
Frank

DB2 backup alternatives

Hi Friends,
I´am very new in DB2. I would like to know some alternatives for the DB2 database backup.
Could be an option to make an offline backup of all the file systems related to db2 in order to restore consistently?
What could be the impact?
We can assume that DB2 is down.
Thanks in advance
Enrique Sánchez

Hi,
As like other database, you should take offline, online and archive log backup regularly to maintain the consistency of your landscape. Offline backup depends upon whether system is production, quality etc. as during offline backup system will not be available so you can plan for every month or every 15 days..depends upon your business requirement.
Online backup and archive log backup should be scheduled daily.
E.g: if you have taken offline backup one month back and after that system crashed then you should restore with online backup and apply archive logs for point in time recovery.
Please check following book for backup on DB2:
[Db2 Admin Guide|http://maben.homeip.net/static/computers/sap/DB2/SAP%20on%20IBM%20DB2%20Universal%20database%20for%20UNIX%20and%20Windows%20Admin%20NW04.pdf]
Thanks
Sunny

DB2 Backup & Restore Method

Hi Gurus,
I have a source system which is ECC6 running on Windows Server 2008 & DB2 9.7 FP2 database. I want to build or copy the exact system to diffrent office. I have done a fulloffline backup on the server. The target system will be suselinux and same database which is DB9.7FP2.
So i have install a ECC6 system on the target system with same System ID,Hostname as the sourse system. . I am not sure what to do next. Please guide me how to restore the database using the full offline backup that i done on the sourse system.
Basically i am just doing a system copy but using the backup restore method.

Hi,
Assuming you're performing system copy by using db2 backup/restore method.
If you would like to take a complete set of (online) backup image which you can restore, rollforward and bring the db into consistent state, you can use "INCLUDE LOGS" option of db2 backup command.
The backup image would include the range of log files required to restore and roll forward this image to some consistent point in time with this option.
On the other hand, you can specify a path to be searched for required logs during recovery. There's an option "OVERFLOW LOG PATH" for rollforward command.
For this issue u will get more information for below link
http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp
REgards,
K.Ramamoorthy

培训邀请函 - DB2/SAP Admin workshop -- SAP环境下的DB2数据管理 (免费)

尊敬的客户，您好:
为了帮助SAP的DB2客户提升SAP环境下DB2数据库的管理能力，我们代表IBM公司邀请您参加由IBM公司提供的《DB2/SAP Admin workshop》培训。
此次免费培训将在深圳（11月1日－ 11月4日）举办。授课对象为具有一定SAP NW经验，希望进一步深入了解DB2 LUW，和在SAP环境下使用DB2的系统管理员和技术顾问。培训为每位学员提供实验环境，其授课目标为：
u2022了解DB2的基础知识；
u2022使用不同的SAP和DB2工具，在SAP环境下通过数据监控，性能调优，备份及恢复等操作，完成对数据库的完整管理；
u2022了解DB2的独有特性，如DPF，MDC及数据压缩，与SAP应用进行深入整合；
u2022了解不同的数据高可用方案设置；
u2022掌握基本问题分析能力。
培训具体事项请见日程安排。
如您决定参加培训，请填写以下回执表在2011年10月15日之前通过Email予以确认。
联系人贾候萍 Jia, Hou Ping
Tel: 010 - 82452042         Email: jiahoup at cn.ibm.com
谢谢您的合作！
（注：交通及住宿自理）
SAP 环境下的DB2 数据管理培训日程
地点：
深圳黎明网络教育中心;
深圳市高新区南区德赛科技大厦西座6F;603
Shenzhen Liming Network Education Center
Desay Technology Building, South Area, Hi-tech Industrial Park
时间：11月1u20144日
(每日上课时间：9:00-18:00)
Day 1
1.1    DB2 & SAP Overview
1.2    DB2 Product Overview
1.3    Installation
1.4    Accessing DB2
1.5    Database Objects
1.6    DB2 Security
1.7    Client Server Connectivity
1.8    DB2 Configuration
1.9    Storage Structures
1.10   DB2 Process Model
1.11   DB2 Memory Model
1.12   SQL Processing
Day 2
2.1    Log File Management
2.2    Backup and Recovery
2.3    High Available Database
Day 3
3.1    Database Partitioning Feature (DPF) and SAP BI
3.2    Storage Layout
3.3    MDC and SAP BI
Day 4
4.1    Deep Compression
4.2    Performance Monitoring and Tuning
4.3    Ongoing Operations - Regular DBA tasks
4.4    Problem Analysis
回执表
公司名称：___________________________________________________________
地址：___________________________________________________________
姓名:                                            职务:
Email:                                              电话:
姓名:                                            职务:
Email:                                         电话:

不错，可以去一下。

来自IBM的培训邀请函:SAP环境下的DB2数据管理

IBM将于４月在广州举行培训。如有兴趣请直接联系负责人。(补充一句，据说是免费的) 详情如下：
为了帮助SAP的DB2客户提升SAP环境下DB2数据库的管理能力，我们代表IBM公司邀请您参加由IBM公司提供的《DB2 DB2/SAP Admin workshop》培训。
此次免费培训将在广州（4月7日－ 4月10 日）举办。授课对象为具有一定SAP NW经验，希望进一步深入了解DB2 UDB ，和在SAP环境下使用DB2的系统管理员和技术顾问。培训为每位学员提供实验环境，其授课目标为：
u2022     了解DB2的基础知识；
u2022     使用不同的SAP和DB2工具，在SAP环境下通过数据监控，性能调优，备份及恢复等操作，完成对数据库的完整管理；
u2022     了解DB2的独有特性，如DPF，MDC及数据压缩，与SAP应用进行深入整合；
u2022     了解不同的数据高可用方案设置；
u2022     掌握基本问题分析能力。
培训具体事项请见日程安排。
如您决定参加培训，请填写以下回执表在2009年3月16日之前通过Email或传真予以确认。
联系人郭亦群 Guo Yi Qun
Tel: 86-10 63614570         Email: guoyiq at cn.ibm.com
Mobile: 86-13701235290
谢谢您的合作！
（注：交通及住宿自理）
SAP 环境下的DB2 数据管理培训日程
地点：广州市天河区林和西路９号耀中广场1006室
广州（4月7日－ 4月10日）
Day 1
     1.1    DB2 & SAP Overview
1.2    DB2 Product Overview
1.3    Installation
1.4    Accessing DB2
1.5    Database Objects
1.6    DB2 Security
1.7    Client Server Connectivity
1.8    DB2 Configuration
1.9    Storage Structures
1.10   DB2 Process Model
1.11   DB2 Memory Model
1.12   SQL Processing
Day 2
     2.1    Log File Management
2.2    Backup and Recovery
2.3    High Available Database
Day 3
     3.1    Database Partitioning Feature (DPF) and SAP BI
3.2    Storage Layout
3.3    MDC and SAP BI
Day 4     4.1    Deep Compression
4.2    Performance Monitoring and Tuning
4.3    Ongoing Operations - Regular DBA tasks
4.4    Problem Analysis
回执表
公司名称：___________________________________________________________
地址：___________________________________________________________
姓名:                                            职务:
Email:                                         电话:
姓名:                                            职务:
Email:                                         电话:
Edited by: Cathy Yang on Mar 5, 2009 7:38 AM

费用?

2008 R2: OS(systemState/C: Drive) backup issues with VSS - 0x80042316 & 0x81080101 & 0x80080005 & 2155348001

Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 4:51:06 AM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name:      Application
Source:        BackupAssist
Date:          8/12/2014 4:51:51 AM
Event ID:      5634
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name:      Application
Source:        BackupAssist
Date:          8/12/2014 4:52:20 AM
Event ID:      5634
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 3 STOP_PENDING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query vss
SERVICE_NAME: vss
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 3 STOP_PENDING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:20:33 AM
Event ID:      8225
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:42:33 AM
Event ID:      11
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 9:31:13 AM
Event ID:      753
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          8/12/2014 9:31:43 AM
Event ID:      10010
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:42:33 AM
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
   Instantiating VSS server
10.
Then, finally stopping again...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 9:51:13 AM
Event ID:      754
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status         Size     Free     Dyn Gpt
Disk 0    Online          278 GB      0 B    (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1    Online         2791 GB      0 B        *    (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2    Online         1863 GB      0 B    (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type   : RAID
Status : Online
Path   : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 1         RECOVERY     NTFS   Partition   3072 MB Healthy    System
Volume 2     C   OS           NTFS   Partition    275 GB Healthy    Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 4     F   BACKUPS      NTFS   Partition   1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
     57380 KB in 20228 indexes.
         0 KB in bad sectors.
    226627 KB in use by the system.
     65536 KB occupied by the log file.
188708420 KB available on disk.
      4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot Pichelman

Hi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected]

Central instance can not startup when i install the SAP /DB2 9 env

Hi,
could anybody help me?   I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been OK, Unfortunately , an
error occurs when I installed the CI.
the error message is that "ABAP Database db must be started on remote server " i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed" the detail informatioin ,please check the the following trans.log. but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password.
first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens. In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before. i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
First let me describe our cluster enviroment
For CI, and DI are not a Single point of failure , so the DI and CI
are out of cluster.     The cluster enviroment just includes the
SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
   1. Host name
sapaix01 : DB instance and DI (visual hostname dbae1)
sapaix02:   SCS,ASCS, CI        (visual hostname scsae1)
2. file systems (sapaix01 DB instance )
Sapaix01
Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
/dev/hd4         6291456   4792544   24%     2808     1% /
/dev/hd2        13107200   6175040   53%    73295    10% /usr
/dev/hd9var     13107200 12816904    3%     1336     1% /var
/dev/hd3        61603840 35610304   43%     3844     1% /tmp
/dev/fwdump       786432    785656    1%        4     1%
/var/adm/ras/platform
/dev/hd1         1048576   1016152    4%      213     1% /home
/proc                  -         -    -         -     - /proc
/dev/hd10opt     4194304   2512624   41%     6241     3% /opt
/dev/lvusrsapae1d10   41943040 41935984    1%        4     1%
/usr/sap/AE1/D10      (Local file system)
/dev/lvdb2ae1   20971520 20927640    1%       38     1% /db2/AE1
/dev/lvdb2logs   20971520 18346424   13%       25     1%
/db2/AE1/log_dir
/dev/lvdb2archive   41943040 41935984    1%        4     1%
/db2/AE1/log_archive
/dev/lvae1sapdata1 104857600 18817168   83%       47     1%
/db2/AE1/sapdata1
/dev/lvae1sapdata2 104857600 18817400   83%       48     1%
/db2/AE1/sapdata2
/dev/lvae1sapdata3 104857600 18817184   83%       48     1%
/db2/AE1/sapdata3
/dev/lvae1sapdata4 104857600 18817168   83%       48     1%
/db2/AE1/sapdata4
/dev/lvdb2db2ae1   20971520 19874760    6%     3931     1% /db2/db2ae1
/dev/lvae1saptemp   20971520 20967584    1%       12     1%
/db2/AE1/saptemp1
/dev/lvdb2db2as   10485760 10483504    1%        4     1% /db2/db2as
/dev/lvae1db2dump   10485760 10470600    1%        8     1%
/db2/AE1/db2dump
scsae1:/export/usr/sap/trans   20971520 20967592    1%       16     1%
/usr/sap/trans
scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
/sapmnt/AE1
10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
/software2
For the database version is 9.1 , so I installed the db2 software in
/db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1 (for DI)
on sapaix01, db2 client software in /opt/IBM/db2/V9.1 (I installed the
db software with virtual hostname dbae1 not sapaix01 )
sapaix02
Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
/dev/hd4         6291456   4915592   22%     2790     1% /
/dev/hd2        13107200   6177120   53%    73643    10% /usr
/dev/hd9var     13107200 12857456    2%     1311     1% /var
/dev/hd3        21495808 16955192   22%     3283     1% /tmp
/dev/fwdump       786432    785656    1%        4     1%
/var/adm/ras/platform
/dev/hd1         1048576   1046848    1%      105     1% /home
/proc                  -         -    -         -     - /proc
/dev/hd10opt     4194304   2197776   48%     9002     4% /opt
/dev/lvusrsapae1   20971520 20966872    1%       47     1% /usr/sap/AE1
/dev/lvae1ascs01   10485760 10243360    3%       86     1%
/usr/sap/AE1/ASCS01
/dev/lvae1scs00   20971520 20706584    2%       97     1%
/usr/sap/AE1/SCS00
/dev/lvsapmntae1   12582912   9886168   22%     1529     1%
/export/sapmnt/AE1
/dev/lvusrsaptrans   20971520 20967592    1%       16     1%
/export/usr/sap/trans
scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
/sapmnt/AE1
scsae1:/export/usr/sap/trans   20971520 20967592    1%       16     1%
/usr/sap/trans
10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
/software2
3. hosts file    the file is the same on sapaix01 and sapaix02
10.241.13.121   dbae1
10.241.13.125   scsae1
10.10.11.1      sapaix01_boot1
10.10.11.2      sapaix02_boot1
10.10.10.1      sapaix01_boot2
10.10.10.2      sapaix02_boot2
10.241.13.71    sapaix01 sapaix01_per
10.241.13.72     sapaix02 sapaix02_per
4. the installation guide and error message please check the attachment
<<installation_and errorlog.zip>>
5. I run db2ilist command nothing disppear
I have another questions
*      whether does DB2 9.1 support installation on the diffirence
directory (default is /opt/IBM/db2/V9.1 my installation is
/db2/db2ae1/V9)?
*      Whether does DB2 9 installation has some relationship with
hostname ?
*       Why db2ilist command result is nothing after I finished the
DB instance installation ?
trans.log
"trans.log" 143 lines, 14041 characters
4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 10.03.2008 - 20:25:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Mar 10 20:25:40 2008                              70 0.000070
4 ETW000 [dev trc     ,00000] db_con_init called                                    25 0.000095
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             42 0.000137
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
4 ETW000                                                                              60 0.000197
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
4 ETW000                                                                            1018 0.001215
4 ETW000 [dev trc     ,00000] Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
4 ETW000                                                                              39 0.001254
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000                                                                              43 0.001297
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
4 ETW000                                                                             282 0.001579
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000                                                                              42 0.001621
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000                                                                              43 0.001664
4 ETW000 [dev trc     ,00000] New connection 0 created                              29 0.001693
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              50 0.001743
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         41 0.001784
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              40 0.001824
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              47 0.001871
4 ETW000 [dev trc     ,00000] DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
cessfully loaded
4 ETW000                                                                            9175 0.011046
4 ETW000 [dev trc     ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000                                                                              42 0.011088
4 ETW000 [dev trc     ,00000] DB6 shared library (dbdb6slib) patchlevels            24 0.011112
4 ETW000 [dev trc     ,00000]    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000                                                                              42 0.011154
4 ETW000 [dev trc     ,00000]    (0.8) Support of SDBUPDEXCL (note 847616)           25 0.011179
4 ETW000 [dev trc     ,00000]    (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000                                                                              40 0.011219
4 ETW000 [dev trc     ,00000]    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000                                                                              39 0.011258
4 ETW000 [dev trc     ,00000]    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000                                                                              51 0.011309
4 ETW000 [dev trc     ,00000]    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000                                                                              40 0.011349
4 ETW000 [dev trc     ,00000]    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000                                                                              40 0.011389
4 ETW000 [dev trc     ,00000]    (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000                                                                              40 0.011429
4 ETW000 [dev trc     ,00000]    (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000                                                                              39 0.011468
4 ETW000 [dev trc     ,00000]    (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000                                                                              41 0.011509
4 ETW000 [dev trc     ,00000]    (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000                                                                              41 0.011550
4 ETW000 [dev trc     ,00000]    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000                                                                              40 0.011590
4 ETW000 [dev trc     ,00000]    (0.27) DB6: activate value compression (note 886231)
4 ETW000                                                                              40 0.011630
4 ETW000 [dev trc     ,00000]    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000                                                                              40 0.011670
4 ETW000 [dev trc     ,00000]    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000                                                                              40 0.011710
4 ETW000 [dev trc     ,00000]    (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000                                                                              39 0.011749
4 ETW000 [dev trc     ,00000]    (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000                                                                              41 0.011790
4 ETW000 [dev trc     ,00000]    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000                                                                              41 0.011831
4 ETW000 [dev trc     ,00000]    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000                                                                              41 0.011872
4 ETW000 [dev trc     ,00000]    (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000                                                                              41 0.011913
4 ETW000 [dev trc     ,00000]    (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000                                                                              41 0.011954
4 ETW000 [dev trc     ,00000]    (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000                                                                              39 0.011993
4 ETW000 [dev trc     ,00000]    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000                                                                              40 0.012033
4 ETW000 [dev trc     ,00000]    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000                                                                              40 0.012073
4 ETW000 [dev trc     ,00000]    (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000                                                                              41 0.012114
4 ETW000 [dev trc     ,00000]    (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000                                                                              47 0.012161
4 ETW000 [dev trc     ,00000]    (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000                                                                              39 0.012200
4 ETW000 [dev trc     ,00000]    (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000                                                                              40 0.012240
4 ETW000 [dev trc     ,00000]    (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000                                                                              39 0.012279
4 ETW000 [dev trc     ,00000]    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000                                                                              41 0.012320
4 ETW000 [dev trc     ,00000]    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000                                                                              41 0.012361
4 ETW000 [dev trc     ,00000]    (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000                                                                              39 0.012400
4 ETW000 [dev trc     ,00000]    (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000                                                                              41 0.012441
4 ETW000 [dev trc     ,00000]    (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000                                                                              41 0.012482
4 ETW000 [dev trc     ,00000]    (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000                                                                              41 0.012523
4 ETW000 [dev trc     ,00000]    (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000                                                                              41 0.012564
4 ETW000 [dev trc     ,00000]    (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000                                                                              41 0.012605
4 ETW000 [dev trc     ,00000]    (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
4 ETW000                                                                              40 0.012645
4 ETW000 [dev trc     ,00000]    (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
4 ETW000                                                                              40 0.012685
4 ETW000 [dev trc     ,00000]    (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
4 ETW000                                                                              41 0.012726
4 ETW000 [dev trc     ,00000]    (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
4 ETW000                                                                              42 0.012768
4 ETW000 [dev trc     ,00000]    (0.128) DB6: db6_free on invalid memory area (note 1092030)
4 ETW000                                                                              40 0.012808
4 ETW000 [dev trc     ,00000]    (0.133) DB6: statement cache enhancements (note 1101031)
4 ETW000                                                                              40 0.012848
4 ETW000 [dev trc     ,00000] Supported features:                                   24 0.012872
4 ETW000 [dev trc     ,00000] ..retrieving configuration parameters                 24 0.012896
4 ETW000 [dev trc     ,00000] ..done                                               126 0.013022
4 ETW000 [dev trc     ,00000] Running with UTF-8 Unicode                            25 0.013047
4 ETW000 [dev trc     ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000                                                                           67222 0.080269
4 ETW000 [dev trc     ,00000] &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed
with reason "24" ("USERNAME
4 ETW000                                                                              48 0.080317
4 ETW000 [dev trc     ,00000] &+     AND/OR PASSWORD INVALID"). SQLSTATE=08001
4 ETW000                                                                              45 0.080362
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              45 0.080407
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              46 0.080453
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              45 0.080498
4 ETW000 [dev trc     ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END)          26 0.080524
4 ETW000 [dbdb6.c     ,00000] *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
4 ETW000                                                                              71 0.080595
2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'AE1'"

Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens

SAP DB2 backup issue

Similar Messages

Maybe you are looking for