SAP delivered roles or profiles for FICO developers and configurators
Hi all,
Can any one help me in building FICO developer roles and configuration roles. Are there any SAP delivered stuff.
Thanks
Bharat
Hi Bharat,
please go thru this document
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/408242160b6255e10000000a155106/frameset.htm">Authorization Objects for Standard Conditions</a>
i guess, there are no special
hope this will help you.
with BR,
Raj
Similar Messages
-
Hello SAP EXperts,
Can anyone tell me how to create a role with SPRO authorization for FICO transactions and roles only. I need to assign a role with which a FICO consultant can do all the customizing related tasks in the development server. Please give some solution.
I invite your valuable inputs
Thanks & Regards
Vanitha
Edited by: Vanitha badampudi on Oct 21, 2008 1:33 PM
Edited by: Vanitha badampudi on Oct 21, 2008 1:36 PMHi there,
The easiest way to get all of the t-codes, is for a customising project to be created in the IMG with all of the relevant IMG activities assigned to it. (Your FI CO consultant can assist here.)
Once that has been done, you can go and create a role in PFCG. Select the menu tab, then select Utilities - Customizing Auth. and it will then ask you to select a customising project.
Once you've done that, all IMG activities and transactions for that customising project will automatically be entered into the menu.
You then need to go and maintain and generate the authorisations.
That's my suggestion.
Hope you can use it.
Regards
Lucille -
Can anybody tell me how to find SAP deliver roles for specific Modules (CD,FI) and stuff. Please tell me how can I find SAP Standard roles?
Thanks in Advance
FaisalHi Fisal,
This you can find from PFCG, go to PFCG-----> in the roles field pull down the menu, then give a search with FI, finance, or accounts yopu will get all the SAP delivered standard roles.
This way you can search for the other modules/ areas as well.
Regards,
Hari.
PS: Award points if helpful. -
Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.
As mentioned above, settlement is to post the cost to cost centers or any possible receivers as per the settlement profile. PM / Service orders, WBS elements, etc., can be temporary cost bearers from which cost should be settled to some permanent receivers.
Cost elements / Cost element groups should be available as Master data before configuring settlement profile.
To answer your latest query, there are 2 type of cost centers.
Sender Cost Center - Against this, labor / internal activity price will be maintained in KP26. This cost center will be maintained in PM / PP work centers. While creating PM / PP orders, one of the work centers & activity types will be mentioned. Based on the KP26 entry for the combination of Activity type & Sender cost center, price will be picked & calculated according to work hours / labor hours maintained in PM / PP orders.
Receiver Cost Center - Receiver cost center is the department / location cost center to which cost should be settled. Only receiver cost center will be maintained in settlement profile. Sender cost centers will be picked up automatically from work center. -
Looking for MI Developers and Architects
Established company in Orange County (California) is currently looking for experienced developers and architects in SAP Netweaver Mobile. Competitive slaries, plus bonuses, we will also sponsor visas to work in the US . Please email resumes if interested to:
anton at rapidconsultingusa.comYou can also try posting to the Flex Jobs mailing list, if
you haven't already:
http://tech.groups.yahoo.com/group/flexjobs/
hth,
matt horn
flex docs -
Hi,
Is there any role (BI Content/SAP Delivered) avaliable in BI 7.0 that can be used for a developer.
Currently we are using SAP_ALL in BI we want a role that can be assigned to all developers
ThanksHow did you reslove the issue
-
SAPMEINT: Roles or profiles for ALE_USER?
When configuring the Message Listener in NetWeaver for SAPMEINT you have to set a "ALE_USER u2014 a valid SAP ERP user to perform ALE communication".
--> See Installation Guide for SAP Manufacturing Execution 5.2 (2.0 ‒ 06/30/2010 ‒ Page 35)
But which roles or profiles do I have to assign to the ALE_USER in ERP-Transaction SU01?Problem solved. The list of authorization objects is in the online documentation:
http://help.sap.com/saphelp_me52/helpdata/EN/78/ca9cfe2422444b9ecd76ef72fbb32a/frameset.htm -
Are there any SAP delivered screens in infotypes for different countries
HI,
I am looking if they have any SAP delivered interfaces for diiferent infotypes. e.g. diffrent screen for MExico or Brazil for IT 0002. Please let me know,
Thanks,
RashmiDear Rashmi,
In IMG (SPRO) under
Personal Management -> Personal Administration -> Customizing Procedures -> Infotypes -> Assign infotypes to countries
If the Country-Dependent Subtypes indicator is set for the infotype in view T777D Infotypes - Dialog/Database Assignment, you can also specify the permissibility of Subtypes for country infotypes.
At the moment, this indicator can only be used for infotypes whose subtypes are defined in the Subtype Characteristics view (V_T591A).
Examples:
Itype Itype text Type Descript. Cntgrp Descript. Status
0006 Addresses J2 Guarantor 22 Japan permitted
0012 Tax Data D * all subtypes 01 Germany permitted
There is no entry for the Personal Data infotype (0002). This means the infotype is permitted for all country groupings.
In the Addresses infotype (0006), the subtype Guarantor (J2) is only allowed for Japan. All other subtypes are permitted for all country groupings.
The Tax Data D (0012) infotype is only permitted for country grouping Germany. Other countries cannot access this infotype.
Regards,
Naveen. -
Su01 - role or profile for MM module
hi experts.
i could like to set the role or profile to a user which only can access to Materials management.
do anyone can guide me which role or profile i should set?thanks for fast reply.
i were enter the all the MM role as the reference u gave to a user.
doc patch = roles in back-end system -> logistics -> materials management (mm).
but the user still cant access the MM module at the logistics -> materials management.
did i still missing some configuration ? -
What are the roles or profiles for auditor ?
hi,
are there any roles or profiles with display only for auditor to access to basis tcodes ?
comment and advice will be appreciated
regards,
kentmanually - how sad.
there are templates for that:
SAP_AUDITOR_A
SAP_AUDITOR_ADMIN
SAP_AUDITOR_ADMIN_A
SAP_AUDITOR_BA_A
SAP_AUDITOR_BA_CFM
SAP_AUDITOR_BA_CFM_A
SAP_AUDITOR_BA_CO
SAP_AUDITOR_BA_CO_A
SAP_AUDITOR_BA_EC_CS
SAP_AUDITOR_BA_EC_CS_A
SAP_AUDITOR_BA_EC_PCA
SAP_AUDITOR_BA_EC_PCA_A
SAP_AUDITOR_BA_EXPORT_DATA
SAP_AUDITOR_BA_FI_AA
SAP_AUDITOR_BA_FI_AA_A
SAP_AUDITOR_BA_FI_AP
SAP_AUDITOR_BA_FI_APMD
SAP_AUDITOR_BA_FI_APMD_A
SAP_AUDITOR_BA_FI_AR
SAP_AUDITOR_BA_FI_ARMD
SAP_AUDITOR_BA_FI_ARMD_A
SAP_AUDITOR_BA_FI_CJ
SAP_AUDITOR_BA_FI_CJ_A
SAP_AUDITOR_BA_FI_GL
SAP_AUDITOR_BA_FI_SL
SAP_AUDITOR_BA_FI_SL_A
SAP_AUDITOR_BA_HR
SAP_AUDITOR_BA_HR_A
SAP_AUDITOR_BA_MM
SAP_AUDITOR_BA_MM_IM
SAP_AUDITOR_BA_MM_IM_A
SAP_AUDITOR_BA_MM_IV
SAP_AUDITOR_BA_MM_IV_A
SAP_AUDITOR_BA_MM_PUR
SAP_AUDITOR_BA_MM_PUR_A
SAP_AUDITOR_BA_ORGA
SAP_AUDITOR_BA_RE
SAP_AUDITOR_BA_RE_A
SAP_AUDITOR_BA_SD
SAP_AUDITOR_BA_SD_A
SAP_AUDITOR_DS
SAP_AUDITOR_DS_A
SAP_AUDITOR_SA
SAP_AUDITOR_SA_BC
SAP_AUDITOR_SA_BC_CCM_USR
SAP_AUDITOR_SA_BC_CUS_TOL
SAP_AUDITOR_SA_CCM_USR
SAP_AUDITOR_SA_CUS_TOL
SAP_AUDITOR_TAX_A
SAP_AUDITOR_TAX_AA
SAP_AUDITOR_TAX_AA_A
SAP_AUDITOR_TAX_COPS
SAP_AUDITOR_TAX_COPS_A
SAP_AUDITOR_TAX_FI
SAP_AUDITOR_TAX_FI_A
SAP_AUDITOR_TAX_HR
SAP_AUDITOR_TAX_MM
SAP_AUDITOR_TAX_MM_A
SAP_AUDITOR_TAX_SD
SAP_AUDITOR_TAX_SD_A
SAP_AUDITOR_TAX_TR
SAP_AUDITOR_TAX_TR_A
SAP_CA_AUDITOR_APPL_AG_EXT
SAP_CA_AUDITOR_SYSTEM
SAP_CA_AUDITOR_SYSTEM_DISPLAY
SAP_FS_CMS_COL_AUDITOR -
User status profiles for work orders and sub-orders
Hi Experts,
I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
Customizing
A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
Situation
The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
Problem
- If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
- If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
Question
Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
Thanks a lot!hi
since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
regards
thyagarajan -
Is there a lens profile for Samyang 14mm and Canon 5D2 ?
Hi !
I'm thinking about buying a new Samyang / Rokinon / Bower etc 14mm wide angle full frame lens.
However, this lens has bad moustache distortion on stills images - not good for architecture.
Is there an Adobe lens profile for Adobe Camera Raw (Photoshop CS6 Bridge) for full frame Canon 5D2 / 3 or 1Ds 3 etc ?
It's needed for Mac - don't know if there is any difference.
Advice before I buy would be much appreciated ...Yay that's great news ... and thanks for such a speedy reply.
Didn't know about the Adobe Lens Profile Downloader ... so have just downloaded it for Mac and found the lens profile.
Appreciate your help ... it'll hopefully be great for correcting the distorion i need. -
ICC profiles for Epson R1800 and Lightroom - Mac Osx
Without trying to inflame an already heated discussion on prints that are too dark under my lightroom - printer - Mac Osx configuration. (Although I too am a sufferer of the darkness...!)
I have recently downloaded the latest ICC profiles for the R1800 directly from Epson to my Mac. There are three of them and for arguments sake they cover the paper type I want "Premium Glossy Photo Paper"
They download as a .sea file and not .icc as I expected.... My knowledge of Mac's doesnt extend to .sea files I'm afraid.
My question is what do i do with the file now that its downoaded?... Nothing happens when you double click on it and It doesnt appear to try to find where to install itself.
On another thread I read about dropping these files into Library - Colorsync - Profiles. They sit there happily but do not appear to show up in Lightroom when I wish to utilise the profiles.
All the original Epson profiles are there from when I installed the Epson Drivers (new and updated) but no new profiles are there. This is definitely the case as the profile "Premium Glossy Photo Paper" is still there but its name should be changed to "Premium Photo Paper Glossy" according to the Epson website... Besides.. If I delete the new files and go back into Lightroom nothing has changed.
Am i placing these files in the wrong area?
Many thanks for any repliesI suspect that some R1800 users have perhaps not tackled the issue of dark prints and may not be feel that they have an issue at all. I also believe that this particular issue only involves Intel Mac's which may not apply to some.
Your issue may have something to do with the printer driver as well... I made sure that I went and found the very latest driver that Epson has out (there is a new one specifically for Intel Mac's). I made sure that I deleted the driver that came with the original disk.... I did this via the "printer setup utility"... then downloaded and installed the new driver.
Only then did I go through the procedure for installing the new icc profiles as discussed...
The profiles should then automatically appear in Lightroom and in colosync in the "Finder" screen under:
" Users" > then whatever your computer name is > Library > Colorsync > Profiles
The new profiles should then be seen.
This is certainly the way I did it and perhaps the whole process has to be gone through for an Intel Mac.
Hope this helps... I am nowhere near a computer expert but it worked for me. -
Issue with .profile for oracle 9i and 10g
Here I have six oracle 9i databases on one box. I am going to upgrade five of them to oracle 10g and want to keep one database RCAT in oracle 9i for one or two week.
So, when I do upgrade I have to setup oracle home for 10g and also profile for oracle user for 10g (correct me if I m wrong). But now I want one database RCAT on oracle 9i. How can I take care of this.
I mean how I will handle profile and all other thing for oracle 9i and 10g at the same time.
Thanks,
VishalInstall 10g under the same OS user as 9i, of course on a different Oracle Home. Then you configure your .profile consequently. Just as an example, this is my .bash_profile with 10g and 11g with the same oracle OS user :
[oracle@linux5 ~]$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
export EDITOR=vi
export ORACLE_BASE=/home/oracle/base
umask 022
o10()
{ export ORACLE_SID=db102
export ORACLE_HOME=$ORACLE_BASE/OraHome10
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:/bin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin
export TNS_ADMIN=$ORACLE_BASE/OraHome11/network/admin
export PS1='[\u@\h_10 \W]\$ '
o11()
{ export ORACLE_SID=db11
export ORACLE_HOME=$ORACLE_BASE/OraHome11
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:/bin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin
export PS1='[\u@\h_11 \W]\$ '
s()
{ sqlplus / as sysdba
asm()
{ export ORACLE_SID=+ASM
db10()
{ export ORACLE_SID=db102
db11()
{ export ORACLE_SID=db11
asm10()
{ export ORACLE_SID=asm10
[oracle@linux5 ~]$ -
How can I obtain and install profile for a Fuji S3 Pro and Nikon D200
How can I obtain and install profile for a Nikon 28-85 AF
A bit of a newbie , just retiredAbout Lens Profiles:
They are different for Raw and JPEG. Sometimes a profile is only available for Raw, sometimes for JPEG, sometimes for both, sometimes for neither. If it is available, it can be found by searching in the Profile tab of the Lens Corrections panel. If it doesn't show available when searching here, you can go to the Adobe Lens Profile Downloader and see if another user, like yourself, has created one. If not, you can download the Adobe Lens Profile Creator tool and make one yourself. See the link below.
Photoshop Help | Digital Negative (DNG)
Maybe you are looking for
-
I have had a 500GB TC for 12 months and use it to so my MacBook can access the internet - as well as the almost full harddrive. Internet is working fine, but when I open Finder and look to access the files on the TC it takes about 3 minutes to connec
-
Browser Identifica​tion!
It's a shame that the Browser Identification option was removed on the WebKit browser starting with the Torch, and I'm equally annoyed that it's not present on the PlayBook. Unfortunately, some sites see the tablet (and the phone) as a "mobile" devic
-
Upgrading from Powerbook to MacBookPro
Hi! I have ordered a new MacBook Pro wish is replacing my Powerbook G4. Is there som fast way to get started with my new MacBookPro? Can I use Carbon Copy Cloner to clone my old and new computer?
-
Adobe Reader crashing on iOS when submitting by email
I have problem with Adobe Reader on iOS devices. Basically i have PDF document which has 1 text field, 1 submit button and 4 more blank pages. Submit button is configured to submit by email. When i type in something in text field and click on submit
-
How can i access any kind of java control inside ejb
I want to access an ejb control of a session bean inside another session bean. Can anybody tell me how can i do that as the weblogic workshop doesnot give any option to add that. Thanks Sachin