SAP delivered standard BADI for custom extracts in R3
Hello Friends,
I sthere any SAP delivered standard BADI that can be implemented for custom extracts in SAP R3.
Thanks
Simmi
Hello
Please see this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0ec3252-f21c-2a10-3c8d-b9ef05f839ef
Page 61
Thanks
Chandran
Similar Messages
-
Best Practice for enhancing the SAP delivered standard WD ABAP application
Hi,
I am new to WebDypro ABAP.
To enhance the SAP delivered Standard WebDynpro Component (complex component with Business objects & powl).
Kindly let me know the best practice for enhancing the Standard WD ABAP from the below 1 or 2.
1) To copy & create a "Z" of the component & make changes in that (or)
2) to enhance directly on the same standard component without making "Z".
Regards,
NSHi NS,
If it is a standard component its better we go for enhancing the component rather than copying it into Z component.
If there is any issue with in the standard component , SAP supports it through notes and OSS messages. If it is a Z component, SAP doesn't support it.
If there is any up gradation of business packages, changes will be done to standard , but not the Z components, wherein we could miss it.
Further, since it is a standard component it might have been used at many places, changes that has to done to reflect all changes might be difficult in this case if it is a z component.
Regards,
Harsha -
Sap standard report for customer trial balance based on business area wise
hi experts,
Can any tell me is there any standard report for customer trial balance based on business area.hi,
You can use this report.
RFSLD00 Trial balance
For Further Reference use the link.
http://www.abapcode.info/2007/06/standard-sap-reports.html
Regards
Sumit AGarwal -
Hi,
i want to implement BADI for Customer field in table BSEG . For that T.Code is FBL3N.
please tell me
How to find the BADI and How to Implement the BADIHello,
I think that the use case page 105 of the documentation is exactly what you need :
"Use case: A new field of an R/3 standard table is to be communicated to the CRM Online application
Assume that you have an additional field in R/3 table KNA1 (customer master). The field is called ZZCONT. It shows in which continent a customer lives. Assume that the R/3 application will be enhanced in a way that the field can be maintained. To realize the communication to CRM you have to perform the following steps.
Hope this will help you,
Regards,
Frédéric -
While doing LSMW standard method for Customer master creation..
while doing LSMW standard method for Customer master creation.....
In 13th step I am getting this king of error
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name ZPROJ was opened
FB109 Trans. 1 : Transaction xd01 is not supported
FB016 ... Last header record ...
FB014 ... BKN00-STYPE 1
FB014 ... BKN00-TCODE xd01
FB014 ... BKN00-KUNNR
FB014 ... BKN00-BUKRS
FB014 ... BKN00-VKORG A1
FB014 ... BKN00-VTWEG 00
FB014 ... BKN00-SPART 0
FB014 ... BKN00-KTOKD
FB014 ... BKN00-KKBER BP01
FB013 ....Editing was terminated
Can anyone help how to solve this?Hello TJK,
<b>FB012 Session 1 : Special character for 'empty field' is /</b>
This is the special function in LSMW, for empty field system will put / sign automatically, so you need not to worry about that.
<b>FB007 Session 1 session name ZPROJ was opened</b> It is opening session ZPROJ which is your project name/object name.
<b>FB109 Trans. 1 : Transaction xd01 is not supported</b>
Check out your field mapping and conversion rule for object.
<b>FB013 ....Editing was terminated</b>
It is not finding proper field mapping rule / file inputs so the sytem terminates the LSMW object.
Check your field mapping and conversion rule, check your source fields, save the file in tab delimited format.
Hope this helps.
Regards
Arif Mansuri -
Standard report for customer Debtors analysis
Hi Everyone,
Can anyone pls let me know if there is any standard report for customer Debtors analysis .....
Thanks,
Srikanth.i dont have functional support, i need to develop a REPORT for Debitor Analysis so i required the tables used and field names of
input:
1) Customer Range,
2) Date Range.
output:
1) Customer
2) Total Outstanding Receible
3) Outstanding amount in days. i.e ( 0- 30, 30-60, 60-90, 90-120, >120 Days) .
please Help me.
Thanks in advance.
Regards,
Srikanth. -
Smartforms SAP-delivered form template for SD Sales Order Confirmation
All,
I am trying to find the SAP-delivered form template for SD Sales Order Confirmation. I looked in OSS Note 430621 and I can not see it there.
This is the sales order likeness of what LB_BIL_INVOICE is for invoice.
Thanks in advance, Saint Paul PeteHi Balaji,
This is your old friend damo(annamali university)!. Saw your question!. I will send you the answer.
[email protected]
Regards,
Damo -
What is the standard API for Customer Contact creation in R12
Hi All,
What is the standard API for Customer Contact creation in R12. my requirement is I need to create contact against Customer(Person/Organization).
I need to develop pl/sql package for create Contact using the following fields
First name , Last name , Email, Phone no, Ph ext,Mobile no,Contact no,Job title, Job title code,Country,Address1,Address2,Address3,Address4,
City,State,Postalcode.
Please help me.
Thanks,
K.MurugesanHi All,
Please update if you have any solution.
Thanks
Maanasa -
Standard Form for Customer Quotation in PS
Hi All,
Can anybody tell me Standard Form for Customer Quotation in Project System (PS).
Its Urgent.
Regards,
Sachin Bhatnagar.Hi,
as per your requirement Tcode -VA21 standard script name is RVORDER01 if u want change as per your requirement copy it as Zform then modify it . and according to ur printform give name in NACE Tcode ...
<REMOVED BY MODERATOR>
thanks,
Suresh.
Edited by: sriratna nainala on Feb 15, 2008 4:12 PM
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 2:55 PM -
Search for BAdi for Customer Master Data (XD01)
Hi experts,
i am looking for a BAdi for Customer Master data (XD01). Can anyone suggest me which one can i use?
thanks in advance.
Regards,
akshhi
execute this report
*& Report ZNAGBADI
REPORT ZNAGBADI.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
reward for useful answers
regards
Nagesh.Paruchuri -
Standard Smartform For Customer Account Statement
Hello All,
As you all know there is standard sapscript and Driver Program for customer account statement.
But i want to know that, Is there any Standard Smartform For Customer Account Statement???
If yes , Please let me know the name of that smartform?
Regards,
Anuja Dhondgethere is no standard smartform for customer statement. only script...
-
Badi for Customer Master adding Subscreens
Hi,
I am working on BADI for Customer master. Basically I am adding Subscreen for Z Table Fields, So I got the screen and designed the screen.
I have written some code
Data: txtCMSDP(40) type c, which I declared in Subscreen text field name
txtCMSBL(40) type c, which I declared in Subscreen textfield name
txtCustomerNumbercms(7) type c.
Data: wa_zdt_sm_kna1_attr type zdt_sm_kna1_attr,
it_data type table of zdt_sm_kna1_attr.
select * from zdt_sm_kna1_attr into corresponding fields of table it_data where kunnr = i_kunnr.
loop at it_data into wa_zdt_sm_kna1_attr.
txtCMSDP = wa_zdt_sm_kna1_attr-dpguid.
txtCMSBL = wa_zdt_sm_kna1_attr-blguid.
txtCustomerNumbercms = wa_zdt_sm_kna1_attr-cms_num.
endloop.
Here I have only Import parameter I_kunnr but I dont have Export parameters for the fields dpguid, blguid and cms_num
I am using BADI customer_add_data and Method READ_ADD_ON_DATA.
I need to display the data in Subscreen form the Ztable , Please help some sample code for Display values in subscreen fields.
Thanks in Advance
vanajaHi Vanaraja,
You are very close . But chosen a different BADI. You need to implement BADI 'CUSTOMER_ADD_DATA_CS' where you will get a Tab strip. Display your data on the tab strip either as label or as input fields greyed out.
Pls reward if useful.
Regards,
Laxman Nayak. -
BADI for Customer's own screen for Purchase Requisition.
Hi All,
I have a requirement where I need to create a BADI implementation for creating addition screens in the Purchase Requisition Transaction (ME51n/ME52n/ME53n).
I know there are User exits but we donu2019t want to implement them. Now in case of PO there is a standard SAP given BADI -> ME_GUI_PO_CUST for Customeru2019s own screen but as far as my understanding goes there are no such BADIs for Purchase Requisition.
Could anyone please advice if I can create a Custom BADI similar to ME_GUI_PO_CUST for PR for adding the screen and throw some light on it like how can this be achieved?
Thanks,
AmeeshaThanks Darek for replying back and the BADI ME_BAPI_PR_CUST looks helpful but could you please help me in understanding how can i create my own custom screens within ME51N / ME52N / ME53N tcode using the BADI , ME_BAPI_PR_CUST.
For example in PO, we have the BADI ME_GUI_PO_CUST, with several methods like SUBSCRIBE and others which we can make use of for creating screen exits but what in the case of PR fpr BADI ME_BAPI_PR_CUST. i couldn't find any sample code for implementing this.
Any help is greatly appreciated.
Thanks,
Ameesha -
Configuring a standard Badi for ESI refund
Hello,
I am Malathi working as HR-ABAPER.This is the First time I am working on BAdI .
I want to stop ESI retro refund by configuring the standard BAdI HR_IN_ESI_REFUND.But when I try to change the Interface Method (as mentioned in the F1 help ) its asking for access key.
Kindly advice on how to configure this BAdI.
Thanks and Regards,
Malathi V.Hi Faizur,
for this BADI doesn't allow multiple implementation I normally would have told you, that you can't use it, because the SAP implementation might be changed and reactivated by any support package.
BUT:
In our systems there are no SAP implementations for this BADI
SAP note 1716090 - RFIDYYWT: Enhancement to customer Badi WTAXREPORT_MODIFY clearly says, that this BADI is a customer BADI.
So why do you have an active SAP implementation for it? I would suggest, that you contact SAP in this case to clarify it.
Regards,
Klaus -
SAP Cloud SDK : Cloud For Customer HTML5 Development
Hi Experts,
I have Some questions about the Upgrade to Silverlight -> HTML5.
1) When the Cloud For Customer release the C4C in HTML5 mode with all the available work-center "Application and User Management" and all ?
2) What is the Development software/environment to create custom business objects or enhance the standard business objects using "SAP Cloud Application Studio 14XX" or "Eclipse" software?
3) After Upgrade the C4C into HTML5 what is the language use in development environment?
Many Thanks,
MithunHello Mithun,
1) You can use the work center "Administration" which takes the role of the "Application and User Management" with a hopeful better representation of the business user needs.#
2) At the moment there are no plans to replace the "SAP Cloud Applications Studio" by something else.
3) As long as there are no migration plans, there are also no plans for a "new" langauge
HTH,
Horst
Maybe you are looking for
-
Imac not detecting projector through bnc cable
I can not get the imac to output the resolution needed for the projectors. I need a way to force the imac to output 1280 x 800 to the VGA display. We have numerous locations where this is an issue. We do not have the luxury of running straight VGA ca
-
Upgraded to CS5, having problems uninstalling CS3
Now that I've used CS5 Design Premium for a couple of months, I'm ready to uninstall CS3 and get back some badly-needed HD real estate. I ran the Adobe Uninstaller and 2 apps are still there plus a sprinkling of folders. Someone on the NAPP forum sug
-
USB Takes a While (rc.sysinit)
FYI to anyone who needs USB support during rc.sysinit I just spent most of a day trying dozens of modprobe this and modprobe that, trials and errors, with lenthy reboots in between, just to discover: It takes more than 5 seconds from a 'lshwd -a' to
-
ACL authorization activities missing in EasyDMS
Hi, As per the help, when defining document specific authorizations the following authorization activities should be available. Admin DeleteFol Delete WriteFile Write DelChild CreateDoc ReadFile Read NoAuth However, when I click the drop-down all I
-
"there was an error working with this photo"
I am new to the forums. I have been using a Windows Vista computer with I believe an older version of LR. I thinkg it is 4.?? When i would plug in my memory i would use LR to import my pictures and import them to an external hard drive connected to