SAP delivered WPS file for SA

We need to understnad if anyone has applied the specific patches for SAP delivered Saudi WPS banking output ?  If any step by step information is available it will help.

Yes you are right, I actually have done this in the past and totally forgot. I ended up using Visual Administrator which worked but I am pretty sure the override options in SDM would have worked also.
thanks
brad

Similar Messages

  • Smartforms SAP-delivered form template for SD Sales Order Confirmation

    All,
    I am trying to find the SAP-delivered form template for SD Sales Order Confirmation. I looked in OSS Note 430621 and I can not see it there.
    This is the sales order likeness of what LB_BIL_INVOICE is for invoice.
    Thanks in advance, Saint Paul Pete

    Hi Balaji,
    This is your old friend damo(annamali university)!. Saw your question!. I will send you the answer.
    [email protected]
    Regards,
    Damo

  • SAP Payment Medium File for China

    Hi Guys,
    Could you advise on this please?
    We need to create a payment file from SAP for sending to Bank of America in China.
    The payment file needs to be in the following format:
    PAYMENT","HEADER","07192005","MTI-MTIW0000","0009"
    "PAYMENT","FXW","31","07252005","DEBIT","9976.37","CNY","国家高新
    "PAYMENT","TRAILER",
    Can you advise please
    (1) which payment medium program do you advise to use in order to generate this DME file for China? Is it payment program RFFOM100?
    (2) are there other payment programs within SAP for China that can handle different file formats specified by the banking partner? Reading the RFFOM100 documentation, the format above does not seem to be accomodated Bank RFFOM100:
    Thanks for any guidance you can offer here.
    Michael

    Refer OSS Note 164888. You will find an answer to your question.

  • SAP delivered standard BADI for custom extracts in R3

    Hello Friends,
    I sthere any SAP delivered standard BADI that can be implemented for custom extracts in SAP R3.
    Thanks
    Simmi

    Hello
    Please see this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0ec3252-f21c-2a10-3c8d-b9ef05f839ef
    Page 61
    Thanks
    Chandran

  • Can some body point me to the source of simulation(sap tutor) scenario file

    There used to be some sap tutor(sim) files for some config scenarios of XI, I am no longer able to see them here in SDN. Can somebody tell me where they are gone or if the location is changed.
    Thanks in advance

    Hi Krishna,
    You can check in service.sap.com for this-
    Link is -
    https://websmp109.sap-ag.de/netweaver ->SAP Netweaver In detail->Process Integration->SAP Exchange Infrastructure->Media Library 
    There are mnay tutor files/documentation etc..
    Elearning~
    https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
    Topic based Demos
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
    Regards,
    Moorthy

  • Entry in SLD for SAP delivered software component contents

    Hi
       I have a predelivered software component version ( SWCV )  ESA ECC-SE 602 which I imported into IR  ( by setting the *tpz file in the appropriate folder and the imported from IR ) This worked ok. Now I have a custom SWCV - that I created in SLD. Before importing this into IR , I want to create a install time dependency from this custom SWCV pointing to the standard. SWCV.
    Question is : Where is the entry in SLD for the SAP standard SWCV - i.e ESA ECC-SE 602 - without this entry - in SLD - how can I point my custom SWCV to ESA ECC-SE 602 ? Or is there any other zip file apart from the *tpz file that is available in marketplace for ESA ECC-SE 602  that I need to import into SLD ? I am stuck at the point of defining the dependency with this question.

    Hi
       I see that in IR , the SAP std software component has the following name ECC-SE, version 602 . But I do not see a corresponding entry for this in the software catalog in the SLD.
    *Question is - should an entry be created automatically in SLD under the software catalog for all SAP delivered contents whenever the tpz file is imported into the IR ? I don't see it created in our case. What is missing ?

  • How do I change the text on a label for a SAP delivered WD view

    Hi,
    I need to change the text that is being displayed for a label in a SAP delivered WD ABAP View. When I look at the properties for this label, the Text property is currently empty, so I assume that the text that is being displayed in the view is coming from the dictionary. I was hoping to change the text of the label via the Enhancement Framework. I created an OTR entry, then went into SE80 for the WD Component, I navigated to the view in question, I pressed the Enhance button and entered $OTR:<package>/<alias name> in the text property for the label. Finally I saved and activated and was prompted to create an Enhancement Implementation, which I did and I selected it. Everything seems to be fine (no errors or warnings). I then ran the WD application. My change was not there. I then went back into SE80 for the WD Component that I created the enhancement. I navigated to the View and looked in the text property of the label and saw that my change was not there. I repeated this process several times and each time when I added the OTR entry to the text property of the label, it saves and activates without issue (in enhancement mode), but when I run the WD App the change does not show up and when I go back to the WD View, my change to the text property is gone. I know that if I really wanted to I could register the object and add the OTR entry to the text attribute of the label, but I am trying to perform this change using a modification free enhancement. Can this be done via an Enhancement, or do I have to register the object and make my change using a modification?

    Hi Gregg,
    excellent question. I had the same problem as well before.
    What I have learned is that you cannot change a UI Element via Enhancements.
    You can add new UI Elements (e.g. new label) or remove existing elements, but you cannot change them (except the layout properties (e.g. colspan) maybe).
    The only possibilities I see is
    1. Remove the existing label, and add a new label with your desired text
    2. Do it as a modification
    3. Do it as a configuration (This means you go to the webdynpro application in SE80, right click and select "Create/Change Configuration)
    4. Do it as customizing (This means you add the URL parameter sap-config-mode=X to the URL, navigate to the label, right click on it, and select "Change Settings for Current Configuration").
    The disadvatages of 3) and 4) are
    - texts in configurations and customizing are not translatable (as far as I know)
    - if you have multiple configurations, you have to change the label multiple times
    Hope this helps a bit,
    Daniel

  • Bursting Control file, Error!! Could not deliver the output for Delivery

    Hi,
    I am using bursting control file to send report output to email in R12.1.3.
    If the report output is having data, it is working fine. if there is no data it is getting errored out with the below message.
    "Error!! Could not deliver the output for Delivery channel:null "
    In the report output i put "No data found", when i click on view output the output in application is showing as "NO DATA FOUND" in PDF .
    "Bursting VMC Approved Purchase Orders for a period (XML Publisher Report Bursting Program)" got above error.
    my requirement is if there is no data, still i require the output to email.
    Thanks in Advance
    Adina.

    Hi,
    I am facing the same situation and want the bursting program to finish in normal even when there is no data.
    Can you please let me know how you resolved this?
    Thanks
    RG

  • How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

    Hello Guru,
    could you please help with my issue with Fiori Installation.
    We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
    Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
    But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
    But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option  "install Add-on" as it written in Guide for ui add-on installation.
    Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
    If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
    Thanks in advance for any help!!!
    Bets regards,
    Natalia.

    Hello Guru,
    could you please help with my issue with Fiori Installation.
    We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
    Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
    But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
    But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option  "install Add-on" as it written in Guide for ui add-on installation.
    Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
    If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
    Thanks in advance for any help!!!
    Bets regards,
    Natalia.

  • Best Practice for enhancing the SAP delivered standard WD ABAP application

    Hi,
    I am new to WebDypro ABAP.
    To enhance the SAP delivered Standard WebDynpro Component (complex component with Business objects & powl).
    Kindly let me know the best practice for enhancing the Standard WD ABAP from the below 1 or 2.
    1) To copy & create a "Z" of the component & make changes in that (or)
    2) to enhance directly on the same standard component without making "Z".
    Regards,
    NS

    Hi NS,
    If it is a standard component its better we go for enhancing the component rather than copying it into Z component.
    If there is any issue with in the standard component , SAP supports it through notes and OSS messages. If it is a Z component, SAP doesn't support it.
    If there is any up gradation of business packages, changes will be done to standard , but not the Z components, wherein we could miss it.
    Further, since it is a standard component it might have been used at many places, changes that has to done to reflect all changes might be difficult in this case if it is a z component.
    Regards,
    Harsha

  • How do I open a .wps file when all I have is Word 2008 for Mac?

    I am running MacBook with Microsoft for Mac 2008. I also have Parallels, running Windows XP, but do not have Word on that virtual setting. Given that, is it possible for me to open a .wps file I've just been sent? I've tried opening it thanks to the Microsoft website but all I get is garble, and the body of the document is scattered throughout the mess I'm looking at.

    The hatter wrote:
    I was going to suggest OpenOffice 3.2, but I guess this means that alone still wouldn't do the job?
    hum...
    Last I know is that the 'standard' OO is not enough.
    But then again I didn't know of Go-OO before searching...
    Sadly I don't have any Works files to tryout.
    Stefan

  • Setin CS for DMS ( SAP DB) not file system

    Hi Forum..
    I wud like to configure CS to my DMS to chk in /chkout originals which i hav to do it from 3rd party system.For this i'm using a BAPI.
    My clint req is he wanted to save documents in SAP DB( Not file system)
    My questions r:
    1.  wat r the necessary config steps tht i hav to follwo ?
    2. for this,Do i need to create Any Ztable ?
    Thanks In Advance.
    P.S: Use ful answer will be rewarded.
    Rgds,
    VIjay

    Hi Vijay,
    To achieve storage of documents in SAP Database as per your clients requirement you need not use Content Server thru KPro.
    Also, there is no need of adding any Z table or any other configurations,
    *Just goto DC10, Uncheck box indicating Use Kpro and to maintain SAP Database in place of CS, just go below to File Size option and enter the size required in SAP Database (for ex:9999999999 which is max. size you can allot).
    Save your settings and then create/change the DIR, try to check-in the document where instead of showing KPro storage categories (ex: DMS_C1_ST), options related to SAP storage categories are displayed, from storage categories like
    Vault, Archieve n SAP DB* select SAP DB and all the storage takes place in SAP Database.
    When you are using Content Server with KPro, even if you are maintaining file size with some values only KPro will work as storage category
    Thank You,
    Manoj
    Pl. reward if useful.

  • Cannot find the class file for com.sap.portal.services.api.connectorgateway

    Hi,
    I was trying the "How to BI JAVA SDK in a Portal iView and get the following error.
    The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.portal.services.api.connectorgateway.IConnectorGatewayService. Fix the classpath and try rebuilding this project.
    I have the following in my portalapp.xml file
    <property name="SharingReference" value="com.sap.portal.ivs.connectorservice"/>
    and i have also added the jar file "com.sap.portal.ivs.connectorservice_api" in the set of lib's
    Has some faced a similar issue? or can someone suggest how I could possibly resolve this.
    Thanks,
    Smitha

    Hi Smitha:
       My webdynpro dc was build failed for "This compilation unit indirectly references the missing type com.sap.engine.services.webservices.espbase.client.dynamic.content.GenericObject (typically some required class file is referencing a type outside the classpath)".
    How should i do?  Thank you!

  • Are there any SAP delivered screens in infotypes for different countries

    HI,
    I am looking if they have any SAP delivered interfaces for diiferent infotypes. e.g. diffrent screen for MExico or Brazil for IT 0002. Please let me know,
    Thanks,
    Rashmi

    Dear Rashmi,
    In IMG (SPRO) under 
    Personal Management -> Personal Administration -> Customizing Procedures -> Infotypes -> Assign infotypes to countries
    If the Country-Dependent Subtypes indicator is set for the infotype in view T777D Infotypes - Dialog/Database Assignment, you can also specify the permissibility of Subtypes for country infotypes.
    At the moment, this indicator can only be used for infotypes whose subtypes are defined in the Subtype Characteristics view (V_T591A).
    Examples:
    Itype Itype text   Type  Descript.   Cntgrp   Descript.    Status
    0006 Addresses    J2  Guarantor      22       Japan       permitted
    0012 Tax Data D    *  all subtypes    01      Germany      permitted
    There is no entry for the Personal Data infotype (0002). This means the infotype is permitted for all country groupings.
    In the Addresses infotype (0006), the subtype Guarantor (J2) is only allowed for Japan.  All other subtypes are permitted for all country groupings.
    The Tax Data D (0012) infotype is only permitted for country grouping Germany.  Other countries cannot access this infotype.
    Regards,
    Naveen.

  • I need file "com.sap.km.cm.par" for EP6 SP 19

    Hello all:
    I need file "com.sap.km.cm.par" for EP6 SP 19. By error, I overwrote the original com.sap.km.cm.par and the com.sap.km.cm.par.bak into the deployment folder.
    Could someone indicate me where could I donwload it from?
    Thanks in advance,
    Alejandro Gómez.
    P.D.: Excuse my bad English.

    Hi Alejando,
    I will send it to you in some minutes.
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers / actions on SDN. Thanks in advance!

Maybe you are looking for