Sap Device Type for Canon IR3035N

Hi there,
I am printing remittance advice notes on a canon ir3035n printer. The output looks fine in the spool file but when you print the output some of the text is printing with a large amount of spacing between the words. The sap device type that is being used is SAPGOF. I am guessing that this maybe the cause of this and was wondering has anyone else used the Canon IR3035n and experienced similar problems? I was going to attempt to use a different device type but am unsure of which device type to use.
Is there a specific device type available for use with this printer? Failing that, does anybody know of a generic Canon device type which I can select from the list of devices types available from transaction SPAD?
Any help would be appreciated.

Hi
Pls refer to OSS note
Note 1069132 - CANON: List of supported printers/device types
It may give some idea.
I hope IR3035N - IR stands for Image Runner.
In the Note search for 3035, you may get some idea
Pls take opinion from SAP / Basis before implementing the note
Regards
Madhan D

Similar Messages

SAP Device typr for HP Color LaserJet CM2320fxi MFP

Hi Experts,
What would be the best suited SAP device type for HP Color LaserJet CM2320fxi MFP?
Regards,
Leela.

Hi Leela,
You may get the details from below HP link
http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
HP Color LaserJet CM2320n
4.5A & higher
ZHPLJCM1
Hope this helps.
Regards,
Deepak Kori

Device type for HP Officejet 7700

Good Day;
I have a problem with SAP priniting on HP officejet 7700(color All in one). Its not printing with SAPWIN default . I used device type HP laser jet 1160 and its printing fine( only black and white).
I am looking to get the colour print out. I have searched for getting the matching device type for this printer , and am not winning.
I have the SAPNOTE mentioning the list of SAP supported printers and device type , this printer is not in the list.
Your help is highly appreciated .
Regards
Seethy

Hi ;
I tried to create a device type using SPAD and just copy the parameters and print controls from other device type HP laserget 1160. But its not working. Should I copy the drivers from OS level? Please assist me in creating a new device type.
Your help is much appreciated.
regards
seethy

Creating a device type for Chinese Simplified

Hello Gurus ,
i have a question regarding Device types. We recently bought a Chinese Simplified Font Flash USB and we installed it on an HP Laserjet 4515. In windows mode the printer is printing chinese correctly . But in SAP i didnt found how to make it print. I was searching for OSS notes but i couldnt find something relevant.
So i copied the device type for the printer , which is HPLJ4000 and i set the character set to 8416 which is (Printer HP LaserJet PCL-5 series Simplified Chin) .
Unfortunately this didnt work , i also tried other char sets but the problem remains . Did anyone had this problem before ?
Best thanks for an idea !
regards,
david

I'm not really sure if you can transport it... but you can export it to file and imported in the target system
SPAD -> Full Administration -> Device Type -> select the device -> Edit -> Transfer -> Export.... same in the target system but Import.
Hope that help.
Regards
Juan

Device type for printer types

Hello,
Could you please tell me the device type for these 2 SAP printer types:
HP Color Laserjet CP1515n
Triumph adler DC 2218
I searched for these, but without any success.
Thank you for your help in advance,
Noemi

Hi,
You can refer to the SAP note 8928 and solve your problem.
Good luck
Tao

Search device Type for Printer Ricoh Aficio BP20n

Hi does anyone knows a Device type for the printer
Ricoh Aficio BP20n
I looked the sNOTE 8928 which routes me to sNOTE 485240.
but "485240" does not exist.
Notes with device types for Gestetner and Savin are not listening the BP20n printer.
"Savin" is a US subsidiary company from Ricoh.
greets chris

Hi Christian,
That's strange, I could see note 485240: Device types supplied by SAVIN
<a href="https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E">https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E</a>
Symptom
The printer manufacturer SAVIN supplies SAP with the following device types. These device types are produced, maintained and supported by Ricoh.
Should you encounter problems while you are using these device types in SAP, do not direct them to the SAP Support hotline. Instead, use the support addresses of the SAVIN Corporation listed below.
Other terms
Device type, SAVIN
Reason and Prerequisites
Detailed information on the SAP device types supplied by the printer manufacturer SAVIN.
Solution
The following products are supported by the SAVIN device types:
Multi-functional Devices
- 4015/4018/4018d
- 8016/8020/8020d
- 9922DP/9927DP *1
- 2522/2527
- 4022/4027
- 8025/8030
- 8025e/8030e *2
- 9935D/9935DP/2035DP/9945DP/2045DP *1
- 2535/2235/2545/2245
- 4035/4135g/4045/4145g
- 4035e/4135eG/4045e/4145eG
- 8035/8045
- 8035e/8035eg/8045e/8045eg *2
- 2055DP/2070DP Type700
- 2555
- 2560/2575
- 4051/4060/4075
- 8055/8065/8075 *2
- 2085DP/2105DP Type850
- 2585/25105 Type850
- 4090/40105 Type2105
- 8090/8110/8135 *2
- C2408/C2524/C3210/C2532
- C2525/C3030 *2
- C2820/C3224/C3828
- C2410/C3210e
- C2824/C3528/C4535
- C3535/C4540 *2
- C6045/SDC555
Printers
- SLP26/SLP26n
- MLP26/MLP26n
- MLP25/MLP25n
- MLP28/MLP28n
- SLP32
- MLP32/MLP35n
- MLP45
- MLP145 *2
- CLP1620
- CLP22
- CLP1036
- SLP38c
- CLP28
- CLP35
- CLP17
- CLP18
- CLP831
- CLP26DN
- CLP27DN/CLP31DN *2
- MLP75n
- MLP175n *2
- CLP128/CLP135
SAP device types ZA001vvv (Latin-1)/ZA002vvv (Latin-2)
These device types support the above-mentioned printers and multi-functional devices. You can download them from the Internet sites listed under "Support".
Latin-1 (Western Europe) supports the following languages:
English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Norwegian, Danish, Finnish
Latin-2 (Eastern Europe) supports the following languages:
Hungarian, Polish, Czech, Croatian, Romanian, Slovak, Slovenian
The ZA001vvv/ZA002vvv device types support the following functions:
Input bin / Output bin
Stapling & Hole punching
Paper type
Duplex printing
Job offset
Resolution
Number of Copies & Collation
EconoMode / Toner saving
Auto tray change/switching
Edge enhancement/Smoothing
Paper size
Orientation
Character set / Symbol set
Color printing
Slip sheet
Edge-to-edge mode
*1: Does not support bar code printing and OCR typefaces.
*2: Supports Unicode printing.
For more information, download the customer documentation from the Internet sites listed under "Support".
Support:
Telephone: 1-800-RICOH(74264)-38
Internet: http://www.savin.com/
Download: http://www.savin.com/savin/savin_com.nsf/SupportDrivers/

Device Type for EPSON TM-U220

Hi All,
We are using EPSON TM-U220 dot matrix printer. Can anybody tell me which device type should be used for this? How to find a appropriate device type for a printer? Where we can get this info? I have selected EPESCP and its not printing the way how its appearing in the preview. I tested with SAPWIN too, same problem I have faced with SAPWIN too.
Thanks in advance.
Hernando

is correct, the printer is set up in the Tx SPAD, we tested several device types, but none has proved effective, as reported, the preview is fine but when printing it is so wrong. My question is, If you have used this type of printer, if so what kind of device type are you used?
Thanks
Edited by: Hernando Enrique Polania Cadena on Dec 30, 2008 10:00 PM

Device type for printer LOCL

Hi everyone,
Do you know a device type for LOCL that will be suitable for all the formats? Our users are using printer LOCL. We Had an issue before that the font of the printout is larger than the usual so we changed the device type. Recently, another user complained because the font of his printout is smaller than the usual. These are two different users with two different types of output devices but both are using printer LOCL. A change in the device type will correct one issue but will raise another. Please help. Thanks.

Dear Sheryl,
Check if you maintained value '__DEFAULT' for Host Printer under Access Method.
Also, Device Class is Standard Printer.
Regards,
Naveen.

Need proper device type for Xerox printer "WorkCentre 5755. 5775, 5790"

Hi ,
Could anybodies suggest the proper device type for *"Xerox printer "WorkCentre 5755. 5775, 5790".
Thanks
Regards
Priyabrata Mishra

Hi Sujit,
I need he information about the device types for these printer models
Work Centre 5755/5775/5790
Please suggest if there is any compatible device types available in the given link by you. I have already downloded all the device types from this link but there is no device type information for these mentioned printer models above. Please suggest
Thank you so much for giving your valuable time
Regards
Priyabrata

Device type for IBM Proprinter XL III

Hi
Can anybody tell me what is device type to be selected for the PRinter IBM Proprinter XL III
Right now when i am printing it comes some garbage and some proper characters.
Thanks in advance

Is it a Line Printer?
I found this link a long time ago... it might point you in the right direction,
https://unebapps01.nebraska.edu/slugo/pubkb.nsf/50b3ab1ea706e0f886256798005a7505/f321eec40338798986256e6f006edada?OpenDocument&ExpandSection=1
Regards
Juan

How SAP device type SWIN sends a page format?

Hi all,
I changed page format (from DINA4 to INCH12) for my SmartForm and try it print with SWIN (I2SWIN) device type.
It has printed with cca 11 xx paging (not full 12") so next pages move upper and upper.
So I have printed it to Text printer in Windows and look at Print controls. And I can find nothing about page formating.
Can you help me please? I would lke to send right page formating.
Note 21738 - Device type SAPWIN says that print control "Esc p xx;" - xx=40 is INCH12.

Yes, it was first thing I tried.
In "initialization" phase I used "\e%SAPWIN%" and "\ep40;" (German Std Fanfold with 8 1/2" width, 12" length). (In some notes was written SWIN doesnt support ""initialization" phase, so I tried, in second step, use it in "first page" too.)
Form output looks like here:
" %SAPWIN% p40; %SAPWIN% OCb Op1 Os1 PP "
It doesnt work. Printed pages (length) have been same as about A4 length yet .
As you can see, printer driver "SWIN SAPlpd/SAPWIN driver 3.0 " add control " %SAPWIN%" after my "add-on's". Is it good, or are my settings deleted by using of it?
Whar are you thinking about:
" Esc q m; Set page length in m*1/10 millimeters (SAPLPD 4.25 or higher)"
+"Esc O M p|l p = Use physical paper edge
l = Use logical paper edge (printable area) [default
(commands only effective with enable_phys_margins=1 [default)"+
Edited by: Daniel Krbecek on Dec 11, 2009 12:29 PM

Device type for Toshiba printer TECB431

Hi,
I have to print DHL labels onto printer TECB431 (Toshiba). I used SAPWIN device type to configure it but the problem is that printer is not feeding the paper whilst multiple page are to be printed. If the spool has only one page, than it prints fine.
Can anybody please suggest the correct device type to be used with this printer.
Thanks in advance !

Hi,
As per your query pls check the same in your windows machine. If you are getting cont. printing on windows machine then you will get the same in the sap also. Pls check the same configuration in other printer who is installed in your sap and working fine. This is realted to printer configuration or installaiton configuration in SPAD.
Anil

How to select paper type for Canon iP5000 with Leopard and Photoshop CS3.

I have printed photographs quite happily for years on my iP5000 using PS7 and 10.X. However since installing Leopard and switching to PS CS3 I am unable to select paper type (glossy, matt, etc). Is this a 10.5 problem, or as I suspect a CS3 problem. Any suggestions would be appreciated.
I can select paper type in other applications.

I don't know if it is the same for your printer but with my Canon MP600 I experienced the same problem until I came across the fact that when Print is clicked there is a Blue Triangle on the right of the dialogue. Click this and the paper type etc is displayed.

Print Adobe PDF problem: Device type related?

Hi,
we have developed a number of adobe print forms and we face a problem. The problem is that not all types of printers can directly print (without first preview the pdf) the form.
We are using an output device with device type post2 (pdf1 works for some printers too) and access method F (Printing on Frontend computer) , but some printers work perfectly and others instead of the form, print out some postscript (or print) commands.
We can as well change our printers and get some postscipt printers but the problem is that we want to give access and print the forms some of our partners who logon to our system via VPN and we cannot "force" them to buy new printers.
Do you have any suggestion for this problem?
Thanx in advance
Kostas

the ABAP Backend is sending a ADS-document in an XML format to the ADS Server (JAVA), the ADS returns a "Parts" for the forms. A "parts" consist of an PDF file and a print file (PostScript, PCL or ZPL), which are placed in the Global Directory. All the conversion should take place within the ADS Server.
This "Parts" are then send as a PDF to the SAP Spooler.
For the printing of this PDF document in the SAP Spool System one of the Device types (POST2, HPLJ4, HP9500, PDF1, AZPL203, AZPL300) is taken into account which send the actual PDF to a physical printer.
What you see in SP01 are the "parts" of an ADS-document.
Report RSPO0020 (for troubleshooting ADS printing issues) is displaying the "Parts", send back from ADS to the backend System
The XDC file is the printer description in XML format, which the Adobe Document Services requires in order to create the "Parts" file. PDF documents can only be printed on printers of SAP device types for which there is an XDC file on the Adobe Document Server. Report RSPO0022 can be used to manage the mapping between the printer device type and the XDC file
Nesimi

Canon device types

Hello,
I have tried looking for devices types for the Canon laserjets models 3025i and 5870i. The suggested devices types (CN30P and CN68G1S) do not exist in our sap system. Does anyone know where I can upload these device types from to place them into sap. Alternatively, does anyone know any other devices types which could be used for these particular canon printers?
Thanks in advance......

check this thread.
How to add a Device Type in SPAD?

Sap Device Type for Canon IR3035N

Similar Messages

Maybe you are looking for