SAP Device typr for HP Color LaserJet CM2320fxi MFP

Hi Experts,
      What would be the best suited SAP device type for HP Color LaserJet CM2320fxi MFP?
Regards,
Leela.

Hi Leela,
You may get the details from below HP link
http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
HP Color LaserJet CM2320n
4.5A & higher
ZHPLJCM1
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

    I recently upgraded to Mountain Lion, and found that I could no longer print to  my HP CM1312nfi.
    This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
    My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
    When I try to download the driver by bonjour or IP, I get the following error message:
    Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
    Is this truly a Software Update server error, and if so, any clue when it will be resolved?
    I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog  lists no devices.
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
    Thanks for your time and attention.

    Of course, once I posted this, I tried again and downloaded the driver without issue.
    My second question still stands, however:
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

  • HP Color LaserJet CM2320fxi MFP - Full Duplex Problem

    Hello!
    I've got LaserJet CM232 and Win7 (x64). My problem is that when I'm printing for example 4 pages of a document it's printing only in full duplex, so 2 pages printed on both sides. I can't find where can I fix this duplex problem, I'd like to choose manually if it will be printing in full duplex or not. Help me find a solution, please.
    Second problem refers to the time of printing. When I print something I have to wait several minutes to print it. Is that a RAM problem? More RAM memory will resolve this problem?
    Thanks a lot for your replies! I'd really appreciate any help!
    Best regards,
    Kuba
    Sorry for my English.

    Hi Leela,
    You may get the details from below HP link
    http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
    HP Color LaserJet CM2320n
    4.5A & higher
    ZHPLJCM1
    Hope this helps.
    Regards,
    Deepak Kori

  • Is there a univeral printer driver for HP Color LaserJet CM1312 MFP on Windows 7 64 bit?

    I had bought a HP Color LaserJet CM1312 Multifunction Printer last year - up to now I could print out via the computer of my doughter (Windows XP), but now this computer is bugged and I would like to be able to use also my own Windows 7 64 bit Computer. Unfortunately the "Full solution" does not work at all, while there also appears to be no Universal Printer Driver for my special printer. In other words: I can´t use the printer and I am upset (HP at its best?).
    Is there any way to get a printer driver that does what it is supposed to do?
    Despaired...
    MKunst

    Have you tried downloading and installing the drivers from here?
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Scanning Software for HP Color LaserJet CM1312nfi MFP

    Has anybody noticed the difference between download drivers with scanning software and the orginal CD PC Setup scanning software. It seems to me that the downloads of drivers and softwares are only the light version of scanning software whereas; 1. there is no toolbar wh about help to see which version of scanning software is installed. 2. The orginal setup has a full version of scanning software.My xp box died xmas and since 2010 I setup the prnt drvs/scan software and I never though this would be a problem if I had to setup again using the downloads from HP. Thank you in advance!

    Hi,
    The original CD is not intended for Windows 7, however you may download the software for Windows 7 below:
    http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3562007&swItemId=tw_77243_2&swEnvOid=4063
    Be sure to unplug the USB if it is directly connected and uninstall any installed HP Software of the printer from Programs and Features prior installing the software above.
    Hope that helps.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Undesirable and random GET_CONFIG pages printing from HP Color LaserJet CM2320fxi

    An HP Color LaserJet CM2320fxi MFP is printing at what seems as random times two pages.  The first page is a GET_CONFIG page and the second page is a two line page of random giberish characters much like the Windings font.
    Error logs on the printer don't reveal anything is wrong.  It apears that the printer is not aware of these printing events or is not recording them in the logs.
    Something similar to this has been encountered and was a result of bad memory or a corrupted firmware load.
    This sort of behavior was found posted online in a very brief message on HP's site. Different model of course. http://h30499.www3.hp.com/t5/Printers-LaserJet/get-config-pages-on-models-CP2025/td-p/1095046  The problem apeared not to be resolved.
    I dislike the event log of these printers. It doesn't define datetime stamp of the events.
    Copied event log:
    Number Code Page
    8 54.2500 2606
    7 54.2500 2598
    6 13.0000 2324
    5 13.0000 2264
    4 13.0000 1503
    3 13.0000 888
    2 13.0000 812
    1 54.2100 0
    The number of events with these symptoms seem pretty sparse. At least those that are reported. http://h30434.www3.hp.com/t5/Other-printing-questions/CM2320fxi-Locks-up-when-printing-from-Ubuntu-9...
    Also, the error 54.xxxx doesn't appear to be documented which makes identifying the problem rather difficult.
    The "Get_Config" occurrences were taking place shortly after the scheduled calibration process occurred. This was discovered by chance when i just happened to walk by and heard the printer spin up and watched it give birth to the get_config pages.  Almost like it was trying to communicate with me.. Perhapse I need to "get_config".  LOL
    As a last resort I reset the NVRAM.  The reset of the NVRAM didn't resolve the problem. There is not enough information available from HP to find a resolution to this problem. This is an attempt to open up a support request with HP or knowledeable HP guru types via this forum.
    Suggestions other than that of  watching and reenacting Office Space are welcome.

    Phillip -- that did seem to work. Thanks!
    One thing of note, after sleuthing it out a bit more, I realized that this happened after I was prompted by Apple's Software update to update the driver to version 1.1.1 (I think that was the number). that update seems to have broken Acrobat, so returning to the one on the Adobe site restores the functionality.
    Perhaps this will be an alert to others not to install the Apple driver when prompted, though it's easy to let that slip by.
    Randy

  • HP Color LaserJet Pro MFP M177fw - PostScript support?

    Hi,
    I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
    HP LaserJet Pro 100 color MFP M175nw
    HP Color LaserJet Pro MFP M177fw
    PostScript support is important for me, and I know that the 175 has this.  However, I'm not sure about the 177, even after digging through several web pages and documents.  Here's what I found:
    - The main specs page for the 177 says that it supports "PCLm".  I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc.  I was unable to find more information on "PCLm".
    - The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver.  This is the only place where I've seen any potential indication that the 177 supports PostScript.  This section also mentions a "PCLmS" driver.  I could not find any further information on "PCLmS".
    - The  for User Guide the 177 only mentions PostScript in a section that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.
    - The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
    I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information?  Also, is there a description of PCLm / PCLmS somewhere?
    Thanks!
    This question was solved.
    View Solution.

    Hi Clent
    Here is some information on both printers.
    Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Data Sheet also.
    http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
    Fonts and typefaces Depend on Operating System fonts and typefaces.
    Print languages
    PCLm
    Laserjet Pro 100 color MFP M175nw
    http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
    Print languages
    HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • EPrint for COLOR LASERJET CM3530 MFP

    I have purchased 6 COLOR LASERJET CM3530 MFP for sales reps around the business i work for. It would be great if ePrint functionality was available for these printers
    Are they expected to recieve a firmware upgrade to enable this functionality and if so do you have a time frame for this.
    thanks

    Any update if there will be a firmware update for this model of printer to enable ePrint
    COLOR LASERJET CM3530 MFP

  • What is the IP address for the HP Color Laserjet CM1312nfi MFP?

    I need to install my HP printer that is hooked up to a wireless network to an iMac.  (as a shared printer)  
    What is the IP address for the HP Color Laserjet CM1312nfi MFP in order for me to install in the apple?  Thanks.

    AirPort Utility can be used to configure and change the settings on any of the AirPorts.
    If you have a Mac, AirPort Utility is here:
    Macintosh HD > Applications > Utiltiies > AirPort Utility
    If you have a PC, AirPort Utility for Windows is on the disk that came with the AirPort Express

  • HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

    I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active.  Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue. 

    This printer doesn't seem to be supported in ML:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
    You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
    Hope this helps.

  • HT3669 i need drivers for HP Color LaserJet CP1215

    hi i need drivers for HP Color LaserJet CP1215 pleaze

    Hi Bertl1,
    Although the HP web site says the CP1215 is not compatible with Macs, there is an open source free driver available. It is a 3-part download/install. Get ghostscript, foomatic, and foo2hp:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
    http://foo2hp.rkkda.com/

  • Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

    Hi there,
    I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
    When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up?  Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
    Any ideas? Any help would be greatly appreciated
    thanks!
    Simon

    Hello @Simonjayh,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
    Step 1: Uninstall Drivers:
    First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
    Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
    Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How to print from iphone to hp color laserjet CM1017 MFP printer

    How to print from iphone to hp color laserjet CM1017 MFP printer

    In order to AirPrint from your iPad/iPhone, here's all you need to do:
    1. Make sure the printer and iPad/iPhone are connected to the same local network.
    2. Open something you want to print (on the iPad/iPhone).
    3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
    4. Tap "Print".
    If you have any issues with printing, below are some steps that should help you out!
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Color LaserJet Pro MFP M176n installed but not printing

    Hello Everyone,
    I have problem with my printer Color LaserJet Pro MFP M176n.
    at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
    Please help......
    - Windows is windows XP 32bit
    - Printer name   Color LaserJet Pro MFP M176n PCLms
    Thanks
    I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will  not print but when run Scan doctor it will print on enternal print .....
    Wael Hilal

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Color LaserJet Pro MFP M177fw fax to pc

    I have just bought this printer and want to msend faxes to my pc.  I was told by PC world that it had this function.  So far I cant find it can anyone help.  Many thanks  

    Hi ,  I would be happy to help shed some light on the issue your are having with trying to setup this Color LaserJet Pro MFP M177fw to receive your faxes on your PC.  I have looked into this further for you, and I'm pretty sure this model doesn't support receiving faxes on your PC. You can double check to make sure I haven't missed it in the  COLOR LASERJET PRO MFP M177 User Guide.
    I did however locate a different model, where in the manual does provide instructions on how to set this feature up but it is a black only printer. Its the LaserJet Pro MFP M225dw (again black only, no colour.) 
    Step 5 (Optional): Configure settings for receiving digital faxes (Windows) The product can save incoming digital faxes to a computer folder. Use the HP Digital Fax Setup Wizard to configure the settings. This feature is available only for Windows. 1. Click Start, and then click Programs. 2. Click HP, click the name of the product, and then click Digital Fax Setup Wizard. 3. Follow the on-screen instructions to configure the settings.  HP also has this feature available on it's HP Officejet Pro 8610/8620/8630 e-All-in-One Printers, which are Colour Inkjets. Some of the commerical products also support this feature but I'm unsure of which ones. I would really suggest contacting HP Shopping for more information on these models.  Hopefully this has answered your questions, and please let me know if there is anything else I can do to help.   Thanks, 

Maybe you are looking for