SAP Downtime through SAP

Is there is any way to check the SAP downtime through SAP itself.
Regard
Vishnu

Dear Vish,
I would suggest that you first downlaod and read SAP Note 1129385 - Downtime management with Solution Manager : FAQ
Once you have read that docuement, then please look at
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089860&
Page 10-21 will guide you though planning uptime and downtime, notifying users about scheduled downtimes, defining downtime alerting, executing downtime, editing downtime and reusing downtime.
These two documents will answer all your questions and guide you to successfully implementing downtime management.
I know this information will be helpful.
Regards,
Paul

Similar Messages

Not able to import IDOC in SAP XI through SAP....

Hi,
I am able to see the IDOC in SAP box through we60 transaction. But its not visible while importing in Integration Repository (SAP XI).
Do i need to do any prior configuration for this...?
Thanks in Advance
Regards
Venkatesh

Just Check the Following
1. In in SCWV in the IR, Tick imoprt of IDOC and RFC allowed
2. Set in the System Information there of your SAP backend System.
3. Then Click on import and, key in the user details.
4. Check whether the user has authorizations for import ( For RFC S_RFC authorization ) is required.
Doing this an Import should be possible.
Reward points if useful
Regards,
Abhishek

Urgent: Sending order05 IDOC from R/3 to ICH (SAP SCM) through SAP XI

Hi All
I have requirement where I have to send Order05 IDOC from SAP R/3 (ECC 6) to ICH (SAP SCM 5) through SAP XI (PI 7).
I came to know that there is one standard scenario in SAP SCM Basis content in integration repository.
I never done any XI development, please guide me with the useful links or whole step by step process. I will be very thankful for your inputs.
Please reply asap.
Regards,
Amol

Hi !
Check this note:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383336323030%7d
Regards,
Matias.

Master Data Load to APO from SAP MDM through SAP PI

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
Prabuddha

Hi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

How to import Third party application through SAP in ABAP

Hello,
This is regarding importing third party application or non sap application through SAP or through portal...
is there any way to do the same?
actually our organization is having one independent application developed on .NET platform. we need to connect that in mY SAP R/3. so pls suggest me some proper way to achieve this one.
regards,
jigar
[email protected]

You can connect to SAP from a .Net application using the .NET connectors. Please find the help below
http://help.sap.com/saphelp_nw2004s/helpdata/en/e9/23c80d66d08c4c8c044a3ea11ca90f/content.htm
http://www.microsoft-sap.com/overview_sap_connector.html
http://www.sapgenie.com/interfaces/netconnector.htm
Regards,
Ravi
Note : Please mark all the helpful answers

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
Priya

Hi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon

Unable to log on through SAP GUi

Hello Gurus,
Issue: Unable to logon through SAP GUI after giving the username and
Password. When the user name and password is entered the system gets to the process mode but hangs in the same stage.
When i check the R3trans -d the following is the result:
This is r3trans version 6.13 (release 640 - 12.12.05 - 14:24:42).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'B3Q'"
r3trans finished (0012).
It means the r3trans is not able to connect the DB. Please suggest a
OSS note for this issue or solution for this issue asap. This
is very urgent.
We are using Nw04,BW3.5, BI3.53, EP6.0 & Oracle 9i. The following are
the support pack details:
Operating system Windows NT
Machine type 4x Intel 8
Database system ORACLE
Release 9.2.0.4.0
Kernel release 640
Compilation NT 5.0 2
Patch Level 109
ABAP Load 1521
CUA load 16
Mode opt
DB client lib. OCI_920_SHARE
DB releases ORACLE 9.2.0..,
DBSL version 640.00
DBSL Patch Level 109
SAP_ABA 640 0016 SAPKA64016 Cross-
Application Component
SAP_BASIS 640 0016 SAPKB64016 SAP Basis
Component
PI_BASIS 2005_1_640 0007 SAPKIPYJ67 Basis Plug-In
(PI_BASIS) 2005_1_640
SAP_BW 350 0016 SAPKW35016 Business
Information Warehouse
BI_CONT 353 0009 SAPKIBIFP9 Business
Intelligence Content
AOFTOOLS 400_640 0000 - Add-On
Assembly Kit (AOFTOOLS 400_640)
Enterprise Portal 6.0:
J2EE Engine 6.40 PatchLevel 104329.313
Portal 6.0.17.0.0
Knowledge
Management
Collaboration 6.0.17.0.0 (NW04 SPS17)

Hello Veer .
Please try to do the following ...
ORA-01017: Invalid username/password; logon denied
Message ORA-01017 can occur both in step 1a) and in step 1b) or 2). Depending on this, the problem can be corrected as follows:
1a) log entries: Logon as OPS$ user to get <sapowner>'s password
 Connecting as /@<sid> on connection 0 ...
ERROR => OCI-call 'olog' failed: rc = 1017
ERROR => CONNECTfailed with sql error '1017'
If you intend to use the standard password for <sapowner> anyway, you can ignore the error message at this point, as the OPS$ mechanism is not needed at all and the connect is carried out using <sapowner>/sap successfully afterwards. Note, however, that BR*TOOLS require a working OPS$ mechanism when executing via DB13!
 Otherwise, make sure that an appropriate OPS$ user is set up. To do this, proceed as follows:
Check whether the parameter
os_authent_prefix = ops$
is set correctly in init<sid>.ora. If you have to make a change, restart the database afterwards.
On Windows, make sure that the following parameter is set in sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Determine which operating system user <os_user> wants to create the connection. If this involves a connect initiated out of the R/3 System (for example, work process connect, DB13 actions), user <sid>adm is used under UNIX and user sapservice<sid> under NT. If you manually called the program that executes the connect, the user you are using is decisive here.
Use SVRMGRL to check whether the user OPS$<os_user> (or OPS$<domain>\ <os_user> for NT with Oracle >= 8.1.5) has been created at database level:
SELECT * FROM DBA_USERS WHERE USERNAME = 'OPS$<os_user>';
(for <os_user>, always use upper case)
If the system does not return an entry, create the user:
CREATE USER "OPS$<os_user>" DEFAULT TABLESPACE <user_tsp>
TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
Note that the name of the OPS$ user must be specified completely in uppercase letters (also the host and domain names in case of NT and W2K), since a logon as OPS$ user will not work if it is not:
wrong: CREATE USER "OPS$c11adm" DEFAULT TABLESPACE ...
 CREATE USER "OPS$sapdom\C11ADM" DEFAULT TABLESPACE ...
correct: CREATE USER "OPS$C11ADM" DEFAULT TABLESPACE ...
 CREATE USER "OPS$SAPDOM\C11ADM" DEFAULT TABLESPACE ...
Tablespace <user_tsp> is used when newly creating objects, when no explicit tablespace name is specified. In connection with R/3, this is almost never the case. Therefore, you can specify any tablespace. Proposal:
 R/3 <= 4.6D: <user_tsp> = PSAPUSER1D
 R/3 >= 6.10: <user_tsp> = PSAP<sid>USR
Check whether the OPS$ user has sufficient authorizations. The following statement must at least return CONNECT and RESOURCE:
SELECT GRANTED_ROLE FROM DBA_ROLE_PRIVS
WHERE GRANTEE = 'OPS$<os_user>';
If CONNECT and/or RESOURCE is missing, you can grant theseauthorizations as follows:
GRANT CONNECT, RESOURCE TO "OPS$<os_user>";
If all the settings described above have been made correctly on NT/ Windows 2000, but the error ORA-01017 is still displayed during the OPS$ Connect, the cause may be a start user set incorrectly for the SAP Service. Change to the services overview of the operating system and check the user who starts the service SAP<sid>_<instance_number>. If the user is not sapservice<sid>, enter sapservice<sid>. Other users (such as the local administrator) do not have an OPS$ user in the database, which leads to error ORA-01017. Check also whether the start user sapservice<sid> is a local user or a domain user. Domain users can be identified by the preceding domain name. Depending on this, the following OPS$ user should exist on database level:
Domain user: <domain>\sapservice<sid>
OPS$ user: OPS$<domain>\sapservice<sid>
Local user: sapservice<sid>
OPS$ user: OPS$<local_host>\sapservice<sid>
1b) log entries: Logon as OPS$ user to get <sapowner>'s password
 Connecting as /@<sid> on connection 0 ...
 Now I'm connected to ORACLE
 Got <sapowner>'s password from table SAPUSER
 Disconnecting from connection 0 ...
 Now I'm disconnected from ORACLE
 Try to connect with the password I got from OPS$-user
 Connecting as <sapowner>/<pwd>@<sid> on connection 0
ERROR => OCI-call 'olog' failed: rc = 1017
ERROR => CONNECTfailed with sql error '1017'
 An ORA-01017 message at this point indicates an incorrect <sapowner> password in the SAPUSER table. In this situation, proceed as follows.
Set the password consistently in SAPUSER and in the Oracle DDIC using the following BRCONNECT call (BRCONNECT >= 6.10):
brconnect -u system/<password> -f chpass -o <sapowner> -p <password>
Otherwise, change the password in the SAPUSER table:
DELETE FROM "OPS$<sid>ADM".SAPUSER;
INSERT INTO "OPS$<sid>ADM".SAPUSER VALUES ('<sapowner>', '<password>');
Important: The SAPUSER table should only exist once in every system: for OPS$<sid>ADM. For this reason, only execute the above-mentioned statements for OPS$<sid>ADM - irrespective of the operating system user actually being used. All other OPS$ users can access the SAPUSER table using a synonym.
If the connect still terminates in the same way, check once more the section "General checks".
2) log entries: Try to connect with default password
 Connecting as <sapowner>/<pwd>@<sid> on connection 0
ERROR => OCI-call 'olog' failed: rc = 1017
ERROR => CONNECT failed with sql error '1017'
If you want to use the standard password sap and do not need the OPS$ mechanism, reset the <sapowner> password to sap:
ALTER USER <sapowner> IDENTIFIED BY sap;
If you do not want to use the standard password, the error cannot be avoided at this point. Set up the OPS$ mechanism as described above instead.
Regards
Rahul
Please Award points if help is useful *****

ECC = SNC ReplenishmentOrderNotification custom message through SAP PI

Helllo,
I have one issue during proxy call in SNC. We are implementing SNC system with our ECC 6.0 system for PO processing, PO Confirmation Processing. The interfaces used is the standard SNC PI package from SAP through SAP PI; however, we have extended PO IDOCs in ECC for some Z-fields and created a new message type in SAP PI and mapped them properly. The problem, when it reached SNC, I checked the XML message and it was as expected with the new Z-fields but when the inbound proxy is called, I got the following error:
Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause The function call of /SCA/BIF_REPLORD_BO failed; a field may have been assigned to the parameter IS_REPLORD_NOTIF whose type is not compatible with this parameter
it seems that the newly generated service interface is not reconginzing the new ReplenishmentOrderNotification message structure with the Z-fields
How can we resolve this issue and make the inbound proxy reconginze the new message stucture?
By the way, I found this Badi: BAdI for ReplenishmentOrderNotification_In? and I have no clue how it works if we need to implement it?
Thank you,

Hi Alan,
Please check below threads.
1. INTERFACE_REGISTRATION_ERROR (inbound ABAP proxy)
2. ABAP ->INTERFACE_REGISTRATION_ERROR for outboud sync ABAP proxy
3. INTERFACE_REGISTRATION_ERROR using File-to-File method
Regards,
Deepak

ECC TO SRM-MDM CATALOG THROUGH SAP PI

We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog. But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
Thanks in advance.

Hi Shiv,
Many thanks for your reply.
Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
So, can someone help me? Any ideas?
Thanks in advance.
Best regards,
Andreia

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

Error Crystal report When viewed through SAP B1

Dear Experts
SAP B1 8.8 PL 16,SQL 2008
I am facing error (Unable to retrive data from database)(Vendor code-156) while accessing Crystal report from client machine throgh SAP B1.I have imported Crystal report through manage layout.The crystal reported is in shared in SAP server B1 SHR folder.I am able to access data from crystal report when viewed otherwise.When accessed crsytal report through SAP b1 on SAP Server crystal report is working fine.
Thanks & Regrds
Saurabh Lamba

Hi Saurabh Lamba,
Go To Administration / System Initialisation / Authorisation / General Authorisation & Set Authorisation for user.
If you have to Set Authorisation for user allready then follow this steps.
1.Restore Database as Test Company.
2.Export Report From Live Company.
3.Import this Report in Test Company as different name.
4.Export Report from Test Company have you Imported as deifferent name.
5.Again Import this Report in Live company as different name
I don't know what's the logic behind it.
Thanks,
Srujal Patel

Need Inputs - Creation of webservice in SAP R3 through PI

Hi Experts,
Need inputs that my client wants me to create an webservice in SAP/R3 through PI and they (client) will call it by their 3rd party software.
Webservice contain fields like :- Comany_Code, Location_Code,Item _code etc.
SAP -
> PI ---> 3rd party
Is this possible through PI ? Please comment !
Thanks.

Hi,
If you have such kinda requirement , then it is easy to create WSDL(webservice) on PI System..
Create a normal Xi Interface with normal Steps .....
Your Sender DataType will be acc to Your requirement as clients want...
go to tools - Define webservice ... ( will Use Outound Service Interface and namespace)
read the template and Put values in there . This will genrate a WSDL for you ,
You Can give this Genertaed , WSDL File to Client to consume in their application and Pass data to it ..
Hope it helps ..
Regards
Prabhat Sharma.

How to populate a field in a standard SAP screen through FMs and Workflows

Hello Everyone,
I have a requirement in which I have to populate a field in an standard SAP Screen.The logic for finding the value of the this field will be done in a new FM and this value has to be passed to this field on the standard SAP screen through workflow.I am new to workflows and need some quick help.Kindly let me know the basic steps I need to follow to realise this requirement.
Thanks,
VP

Hi,
You can create the task in the workflow which contains the method in which you set the value of the field in standard screen using set parameters id and the aprameter name attach to the field

SAP Downtime through SAP

Similar Messages

Maybe you are looking for