SAP Early WatchHealth Check Report

Hi Folks,
I am trying to generated SAP Early Watch Health Check Report from my dual stack system but the JAva data are not populated. On the other hand, the JAva data are populated in EWA report.
Does SAP Health Check Report not support Java data?
Thank you so much,
Mari

Hello,
I haave a dual stack Solution Manager system. The EA reports fine on both ABAP and Java, so I have Java data in my EWA reports.
When I create an Earlywatch HEalth Check Service session, I see the section "Definition of System SLM in SMSY" and I see teh Application Server ABAP Stach and Application Server Java Stack, both checked as relevent. Under the section "Servers in current Landscape" I see both ABAP and JAva checked. So this system is clarly identified in the EWHC as a dual stack system.
What I do not see in the service session are any Java checks that I would see in the EWA report. I mean I am not seeing it in the structure of the service session. This would indicate to me the the checks are not done, as opposed to data missing. If the data was missing the place to contain the data would be there, and its not in the structure.
I performed the same on a Solution Manager 7.1 system, and have the same results, no Java
Again, beause I do not see the tree structure in the service session having any nodes for Java data that are just empty, this does not look like missing data, but looks like it is not reported intentionally.
Perhaps someone who deliivers this service on a regular basis can add their input, or a developer, but based on my testing, on a dulal stack system, where the EWA reports Java data, I cannot see that the Java data is even being considered, or it would have a place int eh session tree of the Earlywatch Health Check, and would have entries int eh tree that would be grey if it was just missing. Additionally it is reporting a Java and ABAP stack, so it does know there is a Java stack. Based on this, it would seem the EWHC does not report on Java.
Unfortunately I do not have a java only stack system in my landscape, as it would be interesting to see what this service would report on a Java only system. Should the report generate no data and the Session not initilaize of just have no nodes, then you could say for certain. Unfortunately I do not know this for certain and can only draw conclusions based on the test I performed on my two test Solution Manager systems . One being 7.0 EHP1 SP 27 and the other 7.1 SP03.
Regards,
Paul

Similar Messages

Early Health Check - missing data

Hi folks,
My Early Health Check reports are generated with a couple of data missed. For example, SQL expensives don't appear and also the CPU Graphics.
Do you guys know what it could be?
tks a lot
Re

Hello,
Here is a question, this same data should be in the Earlywatch Alert reports (EWA).
Is it in the EWA reports or is it missing there too?
The services are different, but report much of the same information, and the Early Watch Alert should have the same
data you mentioned is missing int he Early Watch Health Check.
So is it there or not?
Regards,
Paul

No SAP Datasources or SAP Toolbar in Crystal Reports 2008

I cannot see the SAP toolbar or SAP datasources under "Create New Connection" in Crystal Reports 2008 SP1.
After reading many threads on SDN and reistalling Crystal Reports 2008 SP1 and the BOBJ SAP Integration Kit many times I have not been able to get this to work. I have installed the following in order:
- SAP GUI for Windows
Release: 710
Build: 1046700
Patch Level: 12
includes the BW 3.5 AddOn and BI 7 AddOn
Crystall Reports 2008 SP1 which I installed all components except Legacy XML Export.
Business Objects XI Integration Kit XI 3.1 for SAP which I installed all desktop components and all server components excluding web content and SDK. This was a local install on my PC.
I have ensured that I have only one instance of SAPLOGON.ini on my PC.
I have not applied the transports yet because I want to see the SAP datasources and SAP toolbar in Crystal Reports before I progress.
We do not have Business Objects Enterprise and I'm not sure what "BOE 3.1 Client Tools" is referred to earlier in this thread. My understanding is that in addition to SAP and BW we just need Crystal Reports 2008 and the SAP integration kit.
We are on ECC6 and BW 3.5.
I hope someone can help.

Hi Stratos,
Thanks for your response. I finally got this working. My issue was that I originally used the Crystal Reports 2008 and BOBJ Int Kit downloads from the SAP support portal. I checked with another SDN user Steven Dierick - thanks Steven - for the version of Crystal Reports 2008 he was using (version 12.0.0.683).
I downloaded Crystal Reports 2008 version 12.0.0.683 and the BOBJ Int Kit from the downloads section of sdn and it works!! SAP Toolbar, datasources and everything.
Considering I'm using Crystal Reports 2008 SP0 are there any disadvantages of not using Crystal Reports 2008 SP1?
If I'm better off using SP1 where should I download Crystal Reports 2008 SP1 and the appropriate BOBJ SAP Integration Kit?
cheers,
John

Need SAP BW AR Aging Report with R/3 Aging Report Should Match

Hello All,
Could you please let me know SAP Delivered AR Aging Report on BW Side should match with SAP R/3 AR Aging Report for a given Customer.
When I ran the report on BW Side I am able to match the report values with InfoProvider Values and also with RSA3 Extractor (0FI_AR_4).
But when i tried to compare BW report with ECC Report values are not Matching at a given Customer Number.
Please explain the best practice to match the values of BW Standard Aging report with ECC standard AR aging report.
Thanks,
Geetha

Hi,
I am actually running the SAP Delivered Report in BW.
So I didn't changed any thing in report.
I m running the report in ECC using s_alr_87016128 tcode.
Still I m getting the amount difference.
I have checked at customer level with company code and Key date.
Can i get inputs on these.
ECC Report s_alr_87012168
BW Report:0FIAR_C03_Q0005
Thanks,
Geetha

SAP KW - cannot check in info objects

Following error message pops up while selecting root object for creating structure:
The SAP R/3 System reported the following error while trying to retrieve templates:42-638: Error when transferring data.
Please advise.

Able to check in objects after changing .ini file and uninstalling MS Word udgrades.

FDM Check Report?

When my client loads an unmatched IC transaction via fdm the check report is not successful due to the fact that it is using the BALANCE account which is unbalanced. Is there any way around this besides not using the BALANCE account in the check report?
Thanks in Advance!!

Hello,
This is currently a known issue that is being fixed. There is a patch that is currently being tested for release to address the issue.
I would suggest creating an SR to see if you truly meet the criteria and can obtain an early release.
Thank you,

B1 CHECK REPORT

Is there a way for the canned B1 check report to incorporate the check Payee in the report?

Frank,
The forum that you have posted your question in is for questions related to the SAP Business One Integration for SAP NetWeaver. Your question seems to be application related. For SAP Business One questions, you should post those in the SAP Business One Discussion Forum at ...
SAP Business One Application
With respect to your question, while I have not tried this, you could look at using the Print Layout Designer (PLD) which is the built in SAP Business One Report Writer to add this to the report.
Eddy

FDM Check Report problem

I have set up a Check report with validation rules and validation entities. When I run the report after an export to HFM, the individual validations are showing an error which is correct. The report though is still showing Pass and I get the fourth fish. I am using FDM version 11.1.1.2.00

Hello,
This is currently a known issue that is being fixed. There is a patch that is currently being tested for release to address the issue.
I would suggest creating an SR to see if you truly meet the criteria and can obtain an early release.
Thank you,

SAP upgrade - questions for report painter and query

Hi Experts,
I have two quwstions of SAP upgrade.
My requirement is: SAP upgrade from 4.6B to ECC 6.0 with non-unicode.
1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
For example: From 2008/01/01 to 2008/03/31,I want to know how many queries had been run/ query name/ runtimes of each query.
Best regards,

> 1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
You can check
Note 1155524 - ReportWriter: Upgrade Issues ECC6.0 -Common Customer Issues
> 2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
Such a tool was RBE (Reverse Business Engineer) - which is out of support.
You can try to get that information from ST03. If that is not enough there's no other way than booking an SLO service to find out the queries that have not been used (http://service.sap.com/slo).
Markus

Early watch results report

I had run EARly Watch Alert Report using SDCC , by creating a dynamic session and then it got executed. Now I have to send the report data to a consultant. my problem is I exported data to file using Session -
process- export data to file.
It generated a data file SDCC.....*.dat at path
/usr/sap/trans/data. (OS is Linux and Oracle database)
but it does not allow me to copy the file from server. Is there any other method to get the output of Early watch reprt.
so that data can be emailed

Hi Puneet,
you can download the file from sap service marketplace
the early watch report will be present in
SAP Service Channel - my Inbox
Cheer

SAP Early Watch

Would like to suggest that the SAP Early watch function can be utilised for several Databases.
Currently SAp early watch is only available for 1 DB.

Hi,
1. As stated please attempt to re-install the latest Server Suite Mgr version.
2. This is system behaviour that report can be run for only 1 db at a time. However you should not need to wait an hour to display the report for the newly selected db.
Regards,

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
<b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

Error While connecting to SAP R3 from crystal reports

Hi Experts,
I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
Logon failed.
Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
Location SAP-gateway on host xyz/sapgw12
Error timeout during allocate
TIME Wed Nov 18..
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1872
Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
COUNTER 6
Please help me to solve this error.
Regards,
Ganesh

Hi
please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
I assume that you have imported the necessary trsansports in your SAP R/3 system.
Which kind of driver do you use for the connection to SAP R/3?
Regards,
Stratos

AP Checks Report RTF or PDF??

Hi all,
I just started working on the AP Checks report in XML Publisher. I was wondering whether I need to use the RTF type or PDF type template. I was told that the PDF type template is better for check printing, because it allows us print the data out in fixed position. Is that right?
Any thoughts???
Thanks!!

Hi,
I am struggling to complete the AP Cheque Printing report.
Could you please let me know the step which you followed and could you please send the rtf that you are using.
Followings are the steps I did.
1. Create rdf and register in APPS.
Executable is defined in Customization AP application
Concurrent Program is in Payables application.
2. Create Data Definition and Template in XML Publisher administrator in Payables.
3. Attached the Concurrent program in AP Format set up.
4. Make the Payment, The report is calling and showing completed normal but the output is not coming.
5. Then I run the XML report Publisher and pass the request id then the output is coming as PDF.
But the requirement is when we make the payment , The output should come and it will go to the printer for printing..
Thanks in Advance
Regards
Pradipta

SAP Insider Conference on Reporting and BI - April 20-22, 2009

The first of five SAP Insider Conference semiars will be held next week, don't forget to register for the one closest to you!
SAP Insider Conference on Reporting and Business Intelligence with SAP and BusinessObjects
April 20-22, 2009 in Las Vegas, USA.
Other dates and locations include Orlando, Chicago, Boston and Frankfurt.
Registration and additional information including agendas and speakers can be found [here|http://www.biseminar.com/homepage.cfm?usergroup=us].

Hi
I have access to nearly 10,000 SAP related industry presentations from various sources which I have been collecting over the years. I intend to provide links to the BI related presentations which are freely available. I have started with a post to this forum.
In regards to user group information in Australia I have been on the SAP Australian User Group executive for a number of years. SAP University Alliance members pay approximately $AUD500 annual membership for the user group. We have created best ERP student prizes ($500) for these university members so the membership dues are indirectly returned to the universities. It is up to each university to determine how they award these prizes. The best students are listed on the user group web site (www.saug.com.au). This encourages university membership in the user group and raises the profile of the user group with students. Approximately 50% of the university alliance members in Australia are members of the user group.
In addition I facilitate staff and students contact with member companies for the purpose of research. This tends to be in the format of interviews at our events rather than surveys.
We also utilise university staff at the user group events to conduct education sessions as a foundation to some of SAP's solutions. For example data mining 101, business process modelling 101, MRP 101. This brings academia and industry closer in the SAP ecosystem.
I hope this provides some ideas for the ASUG collaboration
Regards
Paul Hawking
SAP Academic Program Director
Victoria University
Australia

SAP Early WatchHealth Check Report

Similar Messages

Maybe you are looking for