SAP EarlyWatch Alert in SAP ECC and SAP PI

Hi Experts,
Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
Example as below:
Initial System
Initial Action
Total Resp. Time in s
% of RFC Load
Avg. Response Time
Avg. CPU Time
Avg. DB Time
Avg. Roll Wait Time
PI
SAPMHTTP
200.261
15,00
600,3
70,4
165,4
1,5
The total response time in SAP ECC by PI system is 200261 secs.
I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
Thanks in Advance.

Hello Pascal,
No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
This is because of the fact that the checks for both these system types are different.
Regards
Amit

Similar Messages

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

SAP EAM Work Order 1.0 and SAP Field Service 1.0

Hi All,
Related to these two new applications launched recently by SAP, taking advantage of the fusion between SAP and Sybase (SAP EAM Work Order 1.0 and SAP Field Service 1.0), someone already implemented some of these new features in mobile?
If someone did, may share some information regarding these new features?
Best regards,
Rogério Reis
Someone can help?
Edited by: Rogério Reis on Dec 12, 2011 11:33 AM

Hi,
Please review the link below
http://news.techworld.com/mobile-wireless/3280507/sap-announces-new-push-into-mobile-applications/
Regards
Carlos

SAP NetWeaver 04s SP7 Java Version And SAP NetWeaver 04s ABAP Version

Hello,
I would like to ask if anyone has installed both Java and ABAP version on PC/Notebook.
What did you install first and why?
When installing the second of the two, did you need to turn off or detete any part of first installation?
Any advice on the installation of both versions on one PC would be appriciated.
Thank You,
Spiro.

Hi. I have installed NW04s ABAP stack and the NW04 Java stack(slim edition) on my laptop. I installed ABAP first, then the java stack. I did do it the other way around, but the ABAP stack would not load successfully, so remember ABAP first, then java. No, did not turn off or delete anything from the abap installation.
Regards,
Rich Heilman

Alerts for Receiver Adapter and Synchronous Messaging

Hi experts,
I am working on XI 3.0 SP 17. I am doing alert configuration in XI . In below 2 cases we didn't receive alerts for errors.
1) In case of errors in receiver adapters.
2) If an error occurs in synchronous message processing.
What would be the Problem?
Please help me out its very urgent.
Regards,
Hari

Hi Hari
For raising the alert related to Adapter specific you need to create alert rule in RWB and select the adapter option and then select the adapter for which u want to raise an alert.
To configure your alerts, proceed as follows:
● Create the alert categories that you want to use in your alert rules.
● Create the alert rules in which you want to use your alert categories.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Custom Alerts in CIC Win Client for CRM 5.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601db2b2-2839-2a10-0381-8807979f6ff8
Understanding u'r SAP EarlyWatch Alert Report
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
regards
Sandeep Sharma
If helpful kindly reward points

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

Deploying / Transporting SAP HANA-ECC and BW Solution?

Is there one centralized deployment guid for SAP HANA solutions in the SAP ECC and SAP BW environment?
Please can one of you provide some directions to a centralized guide to move / deploy SAP HANA solutions build in one system to Quality and/or production environment?

Rama,
there's a pretty straight forward export/import functionality for moveing models from dev to qa and prod. Please see the SAP HANA Modeling Guide, chapter "Processing Information Objects".
You can also use CTS+ in conjunction with this functionality.
Regards,
Marc
SAP Customer Solution Adoption (CSA)

Can we transfer customer master from ECC to SAP AII

Hi Experts,
We need to transfer the customer master data from ECC to SAP AII ( Auto-id system ) through XI system. There seems to be no std XI content for doing this ( there is std content for sending material master ). I have found out an idoc type BUPAFS_FS_CREATE_FRM_DATA201 in both ECC and SAP AII system. I think I can use this idoc for transferring the customer master. But how do i triggere this idoc whenever the cusotmer is created or chnaged?? ( like for MM we have BD10 transaction to do this )
thanks
sankar

Hello,
I do not get what is the sending message type and what is the receiving message type.
The MaterialIn Message Type in AII is used when you do replicate material master data from ERP to AII.
In ERP You sent IDOC Matmas01 or AINMatmas ( I am not exactly sure about the name, but it is contained in the configuration guide for flex delivery scenario.
When in this replication the gtin field is not populated.
Check the following:
open master data -> product in AII and check if you do have a table containing UOM and GTIN displayed for existing product or that you can create your own product and defining UOM and gtin for that.
If this is not possible, you have not maintained the relevant set type and product configuration in AII. This is stated in config guide again.
Michael
Now I will be off for two weeks with no access to internet. Hope that helps.

Lotus Notes 7.0.1/7.0.2 and SAP Business Workflow

Hi Everyone!
Please help me on this.
My client has received an email from IBM that they could have their SAP Connector free of charge if they are to upgrade their current Lotus connector ver5 to version 7.0.2. This version has included Workflow Integration as part of IBM's integration points with SAP.
Does anyone have an experience on integrating the two? Please share documents or procedures on how to integrate them.
My current configuration is intended for a 1-way communication integration.
I used the report RSWUWFML2 for sending notifications (though in my case, it only sends a message that there were workitems present in the recipient's SAP inbox). The SMTP configuration works fine. The client has not yet purchased the SAP connector.
If the SAP Connector is now available, the 2-way communication will be imposed.
I am planning to configure a 1-way communication integration where it could work either on a 1-way or 2-way communication. Is this possible?
Can I have a configuration (for sending of workitems to Lotus mail or internet mail) which could have a link that connects the recipient to the transaction for approval or workitem execution?
Thank you very much experts!!!
Best regards,
Reymar

Hi,
IBM Lotus Connector for SAP Solutions is a set of two technologies that can be used to integrate IBM Lotus Domino and SAP enterprise resource planning software.
Lotus Connector for SAP Solutions facilitates data transfer and access to SAP software from Lotus Domino.
Lotus Connector for SAP Solutions enables Lotus Notes mail users to receive summaries of SAP workflow items in their Lotus Notes in-boxes, from which the open work item can be launched with the click of a button.
The difference between IBM Lotus Connector for SAP Solutions and IBM Lotus Connector for SAP R/3 with MTA and Workflow is revision 1.7.2 of IBM Lotus Connector for SAP R/3 with MTA and Workflow.
Operating system platforms are supported by Lotus Connector for SAP Solutions with Lotus Domino 7 are supported on the following Lotus Domino 7 server platforms:
Microsoft Windows 2000 Server and Advanced Server
Microsoft Windows 2003 Server and Server Enterprise Edition
IBM AIX 5.2 and 5.3
Sun Solaris 9.0
Novell SuSE Linux Enterprise Server 8 and 9
IBM i5/OS V5R3 and V5R4
Releases of Lotus Domino are supported with Lotus Connector for SAP Solutions are Lotus Domino 6.x and higher and Lotus Enterprise Integrator 6.x and higher are supported
Releases of SAP software are supported with Lotus Connector for SAP Solutions
is version 1.7.2 supports SAP R/3 4.6 and higher, including SAP R/3 4.7 Enterprise and SAP ERP Central Component (ECC) 5.0.
Thanks and Regards,
Prabhakar Dharmala

Where is ESR ,Service Registry in ECC or SAP-PI?

Hi Gurus,
i am trying to develop a custom web service in ECC 6.0 with the end point "Function module' . i went to SE80 and did all the required things.
I want to know where is my ESR and service registry in ECC? Does it only exists in SAP-PI or it also exists in R/3 ECC 6.0 ? I dont know about it and if it exists in ECC 6.0 how does SOAMANAGER helps and what role does it play in that?
so when ECC 6.0 act as a service provider , our WSDL will be generated in R/3 ECC 6.0 so in that case where we register our service and how?
Well I read that SAP Service Registry along with Enterprise Services Repository are shipped with SAP NetWeaver Process Integration 7.1 and SAP NetWeaver Composite Environment 7.1 but then when we create our custom enterprise services in R/3 ECC System how ESR and Enterprise registry comes in to play? how this whole thing works?
Regards,
Mayank

Hi Mayank,
Key message: ESR + SR is part of PI and/or CE and doesn't exist on ECC.
Now regarding your confusion over service created on ECC from FM:
ESR is modeling tool which just model the service, and you can't really execute this service until unless you implement it somewhere (may be ECC). ESR act as central repository of meta-data of all services, however no service execute on ESR and it is just some sort of storage place. Real benefits ESR gives is that you can connect different systems with ESR and extract meta-data (WSDL) to implement webservice in backend (ECC or Java).
On other hand Service Registy act as yellow page where information about actual services is available so if you are looking for some specific service you look into yellopages (Service Registry) and locate the endpoint (actual address) of webservice, again service execute on backend systems not in Service Registry.
When you create service out of FM in ECC then you are still creating service but you are not using ESR, you can also publish service into Yellowpages(Service Registry) so others can locate your service. This approach is called inside-out development, for inside out development you don't need ESR.
You can also design same service in ESR first and then create proxy in ECC and call FM inside proxy, this approach is known as outside-in approach of developing services.
On SCN you can find plenty of information on this subject, and remember outside-in/top down approach is recommended (design first then develop).
Regards,
Gourav

Connection between SAP R/3 and SAP XI with RFC

Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Raju

hi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal

SAP WAS 6.4 Sneak preview and MINI SAP on Single System?

Is it possible to install SAP WAS 6.4 sneak preview and SAP MiniSAP on a Single System?
thanks,
regards,
cg

The WAS 6.40 CeBIT 2004 distribution is said to deliver both ABAP and J2EE stack.
ftp://ftp.sap.com/pub/linuxlab/test_drive/
I consider this as a Mini-WAS system.
I have not tried it yet since my CD's have not arrived yet.

BI and SAP Banking

Has anyone worked on SAP Banking extracts from both legacy and SAP Banking system. If so can any information be provided. Thanks

Hi Niten,
well, most of the information can be found at http://help.sap.com (in the business content, goto the industry solutions and check out the folder banking). As you know all extractors, datasources, infosources are explained there. Depending on the release you are working on, you might get some performance issues while loading the loans, and here specially the extractor for the cash flow will be a big mess. Addionally you need to adjust your loads to bw to the so called 'day end processing' and the 'day start processing' of the source system. These are processes runing, depending on the day, for hours and you will find only a small time frame for your loads. We also had to find some workarounds to get it to work performantly. If you have further questions feel free to ask.
regards
Siggi

Differences between /sap/xi/adapter_plain and /sap/xi/engine

Hello there,
Does anybody know the difference between requesting a webService to "/sap/xi/adapter_plain..." and "/sap/xi/engine..." ?
Thanks very much in advance, Raúl.

Hi Raul,
>Does anybody know the difference between requesting >a webService to "/sap/xi/adapter_plain..." >and "/sap/xi/engine..." ?
You wont request a webservice to the above URLs.
sap/xi/adapter_plain, this URL stands for HTTPAdapter on Sender side. So you can send some HTTP request to this URL.
/sap/xi/engine, this is PIPELINE URL of XI server. You can also directly post data to this URL.
Adapters on sender mode post the data to this URL once it forms message in XI format.
Thanks
Gujjeti

SAP EarlyWatch Alert in SAP ECC and SAP PI

Similar Messages

Maybe you are looking for