SAP Easy DMS Error in Searching a Document.

Hello Guru,
A user can log in in SAP Easy DMS, but when doing the search on it he gots error pop-up message "The parameters is incorrect" how can we solve this he cannot search any document in his easy DMS.

Hi,
Refer below mentioned links to properly use search functionality in Easy DMS
https://help.sap.com/saphelp_edm71/helpdata/en/48/db51333aa369cae10000000a42189b/content.htm
https://help.sap.com/saphelp_edm71/helpdata/en/48/d8f373e5975430e10000000a42189b/content.htm
Regards,
Deepak Kori

Similar Messages

Error message in SAP Easy DMS

Hi there,
Is there anyone who has come across the error message "Classification data can only be maintained using a change number" in SAP Easy DMS. How can one resolve this issue?
Patrick

Dear Patrick,
please see my suggestion in thread http://forums.sdn.sap.com/thread.jspa?threadID=1911999&tstart=0.
Best regards,
Christoph

SAP Easy DMS / KPRO / Content Server

Dear Fiends,
We have a requirement to configure the SAP Easy DMS integrating with ECC 6.0 EhP6 application. I am trying to understand the base application components which are needed to set-up the landscape.
My questions are:
1 - Do we need SAP Content Server as part of the SAP Easy DMS configuration to store the attachments? (or) Can we use shared file system and link it to SAP Easy Document Management directly to store the attachments?
2 - Do we also need KPRO along with SAP Easy DMS?
Thank you,
Sri

Hello Tilak,
Thank you for the response.
Based on your comment, We have to use KPRO regardless whether we use Content Server or not with Easy DMS.
Is KPRO a additional installation or is it part of standard SAP application and available via transaction codes?
Thank you,
Sri

Re:SAP easy-DMS request for recovery path-location

Dear All,
I have a requirement of a recovery for an origin path or a location in easy-DMS for the Document.
Fact is that Document was deleted by mistake, then the deletion flag was reseted, and finally path-hierarchy or location has been somehow deleted.
Is this possible.
Please advice how to get this done if possible.
Regards,
Vivek

Hi,
In Easy DMS if a document is marked for deletion, It cannot be recovered. Process is same as SAP DMS.
For future course, you can have some configuraiton done in Easy DMS like "Originals deleted from EasyDMS can be moved to recycle bin by customizing easyDMS"
Hope this helps.
Regards,
Deepak Kori

Disable or Deactivate Delete Button in SAP Easy DMS.

Dear All,
My client is using Easy DMS and is working fine. Now the issue is as soon as files become more in Private or Public folder he is Deleting Documents using DELETE Button which is available on the Tool Bar. Whereas if he uses Delete Document from Context Menu it shows Authorization is not given to delete the Document.
Is there any way to overcome this by Disabling or Deactivating Delete Button on the Toolbar.
rgds,
Dayanand

Dear Anubhav,
I have already tried this option. It shows this can not be implemented.
Please let me know any other option is there to overcome this issue.
rgds,

SAP Easy DMS - Link between Document Area and Document Types

Deat Friends,
Is there a transaction code or a customizing available to link the Document Area and Document Types??
For example: Document Area (DMS) is linked with Document Type (DRW)
Thank you,
Sri

Hello Chandu,
We are trying to create a documents via TCODE: CVO1N
One of the entry we need to populate is the "DOCUMENT TYPE" to create a document. If, we enter the Document Type = DRW, we are not able to see our custom Storage Category while attaching/Check-in a document.
Where as, If, we enter the Document Type = DMO, we are able to see our custom Storage Category while attaching/Check-in a document.
I see that the Document Type = DRW is linked to Document Area = DMS
Similarly, the Document Type = DMO is linked to Document Area = FILESYSTEM
My question is, Is there a transaction code or a customizing option available to link the Document Area and Document Type?
Thank you,
Sri

Authorization Group (BEGRU) search help required in Easy DMS

Hi all,
I had defined some value in authorization group (BEGRU) in SAP. When i opened the Document using CV01N/ CV02N transaction, then F4 help is available to me.
but when i opened the same document via SAP Easy DMS 7.0, Search help functionality is not there.
How could i activate this.
Pls.. Suggest.
Regards,
S Anand

Hello Sheo,
EasyDMS does not provide search help for Authorization object as of the latest release. The search help achieved by customization of the domain BEGRU does not reflect in EasyDMS.
To achieve this, you can enhance easydms interface by using either easydms plugins or EasyDMS custom tab.
refer:
http://wiki.sdn.sap.com/wiki/display/PLM/EasyDMSPlugin%28Addin%29-Advanced+Development
note: 1355293
Regards
Surjit

Easy DMS document type issue

Hi Gurus,
DMS configuration done in SAP R/3 and able to see all configured document types in sap easy dms as well. But document description wrongly showing under document types.
SAP R/3                                                       EASY DMS
Eg:1   ZSD sales document                          Eg 1 : ZSD    material document
Eg 2 ZMM material document                      Eg2:   ZMM    sales document.
Please help me on this.
Regards,
Nithal.

Hi Chandu,
Everything fine.
In SAP r/3 , document type & document description correctly given but while in EasyDMS document type picking incorrect document description. Remains no issue in easyDMS.
Please help.
Regards,
Nithal.

SAP Easy Document Management 7.0

Hie Gurus
I am implementing SAP document Management and have tried using SAP Easy DMS version 6.0. I understand that there is Easy DMS version 7.0 but i dont know were to find it so that i can download it, the link that i found on help.sap.com could not open so i am kind of stuck now can someone help me please.
My second problem is that on initial login to SAPeasy DMS the Private and Public folders are not being created as folders, its like the system is creating the files right but i cannot open the files because they are not like the Folder icons that i should see. even when i go back to the backend using SAP GUI and and selecting the document via Browser the icons of the two folders are just like for other documents and i cannot open the files.

Hi Aby
Please follow the following steps to download and install the Easy Document Management 7.0.
1.Go to SAP service market place (http://www.service.sap.com).
2.Click on "Software Download" available under the SAP Support Portal Group.
3.On the left hand menu, Click on "Download" and navigate to "Support Packages and Patches" -> "Entry by Application Group". 4.On the righ hand frame, Navigate to "SAP Application Components" -> "SAP ERP" -> "SAP ERP Enhancement Package" -> "EhP4 for SAP ERP 6.0"
5.Select Entry by compopnent -> SAP EASY DOCUMENT MANAGEMENT
There you will find the link to download the installation files under "SAP EASY DOCUMENT MGMT 7.00"
EASYDMS70SP03 0-20004358.exe - For Unicode and Non-Unicode version (32-bit and 64-bit support)
Check The Note 1314600 - SAP Easy Document Mgmt 7.0 SP03 Release information for Detail Information.
Hi Aby A humble Request. if possible try to put your own question by creating a new thread so that You can give point to question you have asked.
Hope Author Partson gives me points
With Regards
Mangesh Pande

Mass Loading of documents on Easy DMS

Hi SAP DMS
We need to load 17 000 documents on SAP Easy DMS, Is there a mass upload functionality that we can use and What is the maximum number of documents can we drag and drop if the mass upload functionality is not available on Easy DMS?
Thanks
Charity

Hi Phephile,
I used C++ for the solution you can see documentation in the following links:
[http://wiki.sdn.sap.com/wiki/display/PLM/EasyDMSPlugin%28Addin%29Development]
[http://wiki.sdn.sap.com/wiki/display/PLM/EasyDMSPlugin%28Addin%29-Advanced+Development]

Easy DMS cannot use additional data while creating a document

Hello,
We have installed sap easy dms 7.0
We have a problem while creating a new document with SAP Easy DMS.
On the DIR tab the additional data cannot be used.
Do I have to change a registry setting?
We already have defined classes and their features and values in CL02 en CT04
please help
Geert ter Harmsel

Hi,
Additional functions for object links active Indicator controls the activation of additional functions for the links of objects to this document type.
You can activate the following additional functions for an object to document link:
1) Valuation
Additonally, you can link another object to a chosen database table (See example Additional Object).
You can delete the additional information of an object link.
2) Classification
You can classify the link. You must create a class (class type 048 - object link) with the characteristics that you want to specicify for the link (For example, responsibility, organaization).
When you set the indicator these functions are active during processing of the document info recod, register object link.
Hope this is what you are looking for.
Regards,
Deepak Kori

Thumbnails created when I creat document in easy DMS

Hello,
Can somebody help to analyze this problem? When I creat a document and attach an original file to the document in easy DMS, there will be a thumbnail created meanwhile. This is not expected, and can you tell me why and how to avoid this?
Thank you.
BR
Michael

Since you are using easyDMS 7.1.2.2, note 948254 that you have applied is obsolete.
Please refer to SAP Note 1367514 for registry settings in SAP Easy DMS 7.0 &above.For 'DisableThumbnails' parameter,setting value to 1 will disable the creation of thumbnails from EasyDMS interface.See if this helps.
Regards,
Pradeepkumar Haragoldavar

Approval Process in Easy DMS.

Dear All,
How can we use approval process in SAP EasyDMS. we have status network as Inwork,Request for approval and Release.
The person who uploads document will be authorized to change the Inital status from "Inwork" to "Request for Approval". The next superior person will release that document.
Now issue is how does the approver will come to know about the document which is requested for release. By using search method in SAP Easy DMS he gets a list of doc's which are having the status "Request for Approval". Is it the right method or do we have an alternative, to address the above issue.
rgds,

Hi Daya,
Yes, you are right! In standard behaviour this is the only method or you can create a receipient list and approver will get the intimation in SAP mailbox ( t-code SBWP). If you want more advance that user needs to get intimation in his external mailbox like outllok, lotus note etc. then you can use Workflow. This can be achieved with help of Abap'r ( workflow) person.
In standard you are right.
Hope this will help.
Regards,
Ravindra

In easy DMS-Activate grey field

Dear all,
In easy DMS , find or search document screen some of field are in grey ex. full text search
it is possible to activate this field through to configure TREX, in SPRO
How can i configure TREX in spro .
Plz give me detail or path ot t-code
Rgds

Dear Harish,
I have noticed there are many posts from you on easyDMS (starting from u201C what are the drawbacks.etc etc).looks like you are facing some issues in implementing the easyDMS. but that also shows that you have not gone through the proper documentation which is available with the installation of easydms in pdf formats..
you can first go through the documents carefully (step by step approach)..once you do it, you will get a very clear picture of what is easydms and how it works..after that in case you get some specific issues you can always post them in SDN..
Sometimes investing some time to learn a product will provide you more insights about product..by QnA session you wont be able to know all the features of easydms (or for any other product in general).
Plz take is in a positive way..we have experts in SDN who can help but even god helps those who help themselves
best regards
anu

EASY DMS

Dear all,
In easy DMS , find or search document screen some of field are in grey ex. full text search
wht is a reson and how i can remove it?
KIndly help

hi,
SPRO, Document management-->Document Search on the Internet (Internet Transaction Server)
u get tree option, 1. Maintain Search Server Relation, 2.Set Up Search Engine Index, 3. Start Processing for Documents
u need to configure for search.
Also, full text serch,
General Data>Settings for Storage Systems>Create MIME Types for Full-Text Search.
Benakaraja
??P

SAP Easy DMS Error in Searching a Document.

Similar Messages

Maybe you are looking for