SAP ECC 5.0 after installation does not start.
I have installated ECC 5.0 - ABAP Stack in my PC which has 1 GB of RAM and enough hard disk resource. when i start SAP system from MMC it starts and then shuts down after some time. all my work process die one by one.
i have attached the dev_disp file content with this. please advise what could be the problem and how to solve it? Its an emergency, please help..
dev_disp trace file
trc file: "dev_disp", trc level: 1, release: "640"
Thu Apr 12 13:25:23 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 1060
***LOG Q00=> DpSapEnvInit, DPStart (09 1060) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
Thu Apr 12 13:25:24 2007
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Thu Apr 12 13:25:28 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 03970040, size: 2505416)
DpShMCreate: allocated sys_adm at 03970040
DpShMCreate: allocated wp_adm at 039717A8
DpShMCreate: allocated tm_adm_list at 03973188
DpShMCreate: allocated tm_adm at 039731B0
DpShMCreate: allocated wp_ca_adm at 03B910F8
DpShMCreate: allocated appc_ca_adm at 03B95748
DpShMCreate: allocated comm_adm_list at 03B96EB8
DpShMCreate: allocated comm_adm at 03B96ED0
DpShMCreate: allocated vmc_adm_list at 03BC5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 03BC5CF8
DpShMCreate: allocated wall_adm at 03BC5D00
MBUF state OFF
Thu Apr 12 13:25:29 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Apr 12 13:25:30 2007
***LOG Q0K=> DpMsAttach, mscon ( vyasa) [dpxxdisp.c 9736]
Thu Apr 12 13:25:31 2007
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Thu Apr 12 13:25:32 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Thu Apr 12 13:26:10 2007
ERROR => W0 (pid 2052) died [dpxxdisp.c 12187]
ERROR => W1 (pid 2060) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2068) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2076) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 2084) died [dpxxdisp.c 12187]
ERROR => W5 (pid 2092) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2100) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 2108) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2052 (SIGUSR2)
ERROR => DpWpKill(2052, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2060 (SIGUSR2)
ERROR => DpWpKill(2060, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2068 (SIGUSR2)
ERROR => DpWpKill(2068, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2076 (SIGUSR2)
ERROR => DpWpKill(2076, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-2084 (SIGUSR2)
ERROR => DpWpKill(2084, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2092 (SIGUSR2)
ERROR => DpWpKill(2092, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2100 (SIGUSR2)
ERROR => DpWpKill(2100, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2108 (SIGUSR2)
ERROR => DpWpKill(2108, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 12 13:26:20 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Apr 12 07:56:20 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2052 Ended no 1 0 0
1 DIA 2060 Ended no 1 0 0
2 UPD 2068 Ended no 1 0 0
3 ENQ 2076 Ended no 1 0 0
4 BTC 2084 Ended no 1 0 0
5 BTC 2092 Ended no 1 0 0
6 SPO 2100 Ended no 1 0 0
7 UP2 2108 Ended no 1 0 0
Dispatcher Queue Statistics Thu Apr 12 07:56:20 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Thu Apr 12 07:56:20 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Apr 12 07:56:20 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 12 13:26:25 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2028) (SOFT_KILL)
Stop icman
killing process (2032) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:2028 HANDLE:1632)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 12 13:26:26 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2028 HANDLE:1632)
[DpProcDied] Process died (PID:2032 HANDLE:1624)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'vyasa'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1640
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 1060) [dpxxdisp.c 8495]
Good Bye .....
and .........
trc file: "dev_disp", trc level: 1, release: "640"
Thu Apr 12 23:42:24 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 1544
Thu Apr 12 23:42:25 2007
***LOG Q00=> DpSapEnvInit, DPStart (09 1544) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Thu Apr 12 23:42:29 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 03970040, size: 2505416)
DpShMCreate: allocated sys_adm at 03970040
DpShMCreate: allocated wp_adm at 039717A8
DpShMCreate: allocated tm_adm_list at 03973188
DpShMCreate: allocated tm_adm at 039731B0
DpShMCreate: allocated wp_ca_adm at 03B910F8
DpShMCreate: allocated appc_ca_adm at 03B95748
DpShMCreate: allocated comm_adm_list at 03B96EB8
DpShMCreate: allocated comm_adm at 03B96ED0
DpShMCreate: allocated vmc_adm_list at 03BC5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 03BC5CF8
DpShMCreate: allocated wall_adm at 03BC5D00
Thu Apr 12 23:42:30 2007
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Thu Apr 12 23:42:31 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( vyasa) [dpxxdisp.c 9736]
Thu Apr 12 23:42:33 2007
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Thu Apr 12 23:42:34 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Thu Apr 12 23:43:12 2007
ERROR => W0 (pid 1596) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1020) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 1820) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1824) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 1720) died [dpxxdisp.c 12187]
ERROR => W5 (pid 548) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 1856) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 1904) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1596 (SIGUSR2)
ERROR => DpWpKill(1596, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1020 (SIGUSR2)
ERROR => DpWpKill(1020, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-1820 (SIGUSR2)
ERROR => DpWpKill(1820, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1824 (SIGUSR2)
ERROR => DpWpKill(1824, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-1720 (SIGUSR2)
ERROR => DpWpKill(1720, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-548 (SIGUSR2)
ERROR => DpWpKill(548, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-1856 (SIGUSR2)
ERROR => DpWpKill(1856, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-1904 (SIGUSR2)
ERROR => DpWpKill(1904, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 12 23:43:22 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Apr 12 18:13:22 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1596 Ended no 1 0 0
1 DIA 1020 Ended no 1 0 0
2 UPD 1820 Ended no 1 0 0
3 ENQ 1824 Ended no 1 0 0
4 BTC 1720 Ended no 1 0 0
5 BTC 548 Ended no 1 0 0
6 SPO 1856 Ended no 1 0 0
7 UP2 1904 Ended no 1 0 0
Dispatcher Queue Statistics Thu Apr 12 18:13:22 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Thu Apr 12 18:13:22 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T8, U9, , vyasa, 23:43:11, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Thu Apr 12 18:13:22 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 12 23:43:27 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1592) (SOFT_KILL)
Stop icman
killing process (1604) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 8
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/8
LOCK WP ca_blk 2
return errno (-17) to T8
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T8 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1492
dp_tm_adm[8].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1176401612
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 8
DpListInsert: insert elem 8 into tmadm_free_list (at begin)
DpListInsert: 193 elems in tmadm_free_list
DpListRemove: remove elem 8 from tmadm_inuse_list
DpListRemove: 8 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1592 HANDLE:1632)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 12 23:43:28 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1592 HANDLE:1632)
[DpProcDied] Process died (PID:1604 HANDLE:1624)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'vyasa'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/8
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1640
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 1544) [dpxxdisp.c 8495]
Good Bye .....
Dear Mr.Rafael Toshiaki ,
Sorry for the late reply. Please guide me to solve this issue.
Thanks in advance.
Sreevidya.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Apr 13 23:40:29 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\HUM\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\HUM\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\HUM\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, ASCII
M pid 3780
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3780) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M
M Fri Apr 13 23:40:30 2007
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 03970040, size: 2505416)
M DpShMCreate: allocated sys_adm at 03970040
M DpShMCreate: allocated wp_adm at 039717A8
M DpShMCreate: allocated tm_adm_list at 03973188
M DpShMCreate: allocated tm_adm at 039731B0
M DpShMCreate: allocated wp_ca_adm at 03B910F8
M DpShMCreate: allocated appc_ca_adm at 03B95748
M DpShMCreate: allocated comm_adm_list at 03B96EB8
M DpShMCreate: allocated comm_adm at 03B96ED0
M DpShMCreate: allocated vmc_adm_list at 03BC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 03BC5CF8
M DpShMCreate: allocated wall_adm at 03BC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Apr 13 23:40:31 2007
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\hum\920 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPHUM's password
C Connecting as /@HUM on connection 0 ...
C Attaching to DB Server HUM (con_hdl=0,svchp=06EB4ADC,svrhp=037D3524)
C
C Fri Apr 13 23:40:35 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
[dboci.c 3514]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 9750]
C Try to connect with default password
C Connecting as SAPHUM/<pwd>@HUM on connection 0 ...
C Detaching from DB Server (con_hdl=0,svchp=06EB4ADC,srvhp=037D3524)
C Attaching to DB Server HUM (con_hdl=0,svchp=06EB4ADC,svrhp=037D3524)
C
C Fri Apr 13 23:40:40 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
[dboci.c 3514]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 9750]
B ***LOG BV3=> severe db error 12154 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 12154 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-12154: TNS:could not resolve service name [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1269]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server vyasa_HUM_09 on host vyasa (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Apr 13 23:40:40 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9589
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3780) [dpnttool.c 357]
Similar Messages
-
I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?
You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html -
Solaris 10 installation does not start
Hi
I am new to solaris . I downloaded the four zipped ISO files of solaris 10 from the website. I burned the images on the cd. When i insert the disk 1 and restart the computer it does not detect the cd as bootable and does not start the installation. I have win XP previously installed as the only os on my laptop. help me plsMake sure your computer supports bootable CD's and that you burned the images correctly to your CDR.
-
10 G installation does not start on Windows 2000 SP 4
Machine configuration:
Pentium 4 2.8 GHz
496 MB RAM
120 GB HDD
The temp folder log shows that all installer requirements are met.
Still the OUI window does not show up. Any ideas?Hi Viking
First things first. Here are some things to consider:
1. If using Windows 2000, you need to be using Windows 2000 Professional with SP4.
2. You should not have any other Oracle software running during this install.
3. You also not have ORACLE_HOME, TNS_ADMIN or any of the other Oracle environment variables set.
4. You need to be a local administrator on the machine.
5. You should not have a firewall enabled.
6. You need to have a fully qualified domain name (FQDN) set for the machine.
7. The FQDN should be set in the HOSTS file which you can find in c:\windows\system32\drivers\etc
8. You need to check the certification matrix for 10.1.3.2.0 and make sure it is available for Windows 2000 and that there are no other prerequisites?
Does any of this help?
Regards
Michael -
Lion installer does not start after reboot
When I run the lion installer App, it does its thing, copying files for ~3 minutes,
then reboots the computer.
After the computer reboots, Instead of the expected 'install' phase, I am directly returned to the login screen, exacly as a normal boot, and 'About this mac' confirms I am still running 10.6.8
One of my collegues tried extracting the dmg from the installer app, and turned it into a bootable usb disk
Booting from this produced a grey screen, with the timer animation at the bottom, and a grey barred circle just above center.
After half an hour without any indication of progress or disk activity on this screen, I hard-power-off'd the machine, and powered on, straight back to the normal 10.6.8 login screen.
My mac is an early 2011 13" macbook pro.
Can someone please tell me why lion refuses to install, or how to find out? and how to fix it?
Thank you
Nick.I just spotted the following in the console:
Install Mac OS X Lion[368] Error loading /Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage: dlopen(/Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage, 265): Library not loaded: /usr/lib/libcsfde.dylib
Referenced from: /Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage
Reason: image not found
Does this mean a file is missing from my installer? -
Business Objects Explorer XI R3.1 SP1 (Polestar) installer does not start
I am trying to install Business Objects Explorer XI R3.1 SP1 on Business Objects Edge Professional 3.1 on Win2k8 Server, but the installer dialog box disappears once I click "next" on "Configure Web Application Server" dialog box.
Note: When I use "disappear" above, I mean the "setup.exe" disappears from task manager. Also, the installation dialog box disappears from the screen.
I followed the same steps on Business Objects Edge Standard 3.1 and everything ran fine. I also tried to reproduce the issue on Business Objects Enterprise Premium, but it ran fine. All these installations were done on 64 bit win2k8 server.
Any help or tip on this issue would be highly appreciated.
Thanks,
GauravHi there,
I extracted the files to a different drive and ran the installer from there. It eventually ran fine. I still don't know why it couldn't run from the same drive.
I tried running it from the command line as well, but it failed from there. I raised it to SAP as well which they haven't yet responded to.
Thanks,
Gaurav -
The installation does not start when I log in to Adobe Download Assistant.
When I downloaded the program (Ae) it took me to the download assistant; which allows you to sign and start the installation process on its own. I am having a problem with the installation starting when I sign in. Once I sign in it gives me some programs I could download, but are not what I am looking for. Please help.
Thanks
Bperry7What computer/OS are you trying to download After Effects on?
Make sure that your computer meets the System requirements for running After Effects. For example, AE requires a 64-bit operating system. If you're on a 32-bit version, you will be unable to install AE.
If you meet the system requirements, try one of the following:
Restart the browser and from the website, try downloading After Effects again.
Sign in to Adobe Download Assistant, and then from the Show Me menu choose Video, and then click the left/right arrows till you find After Effects CS6. -
Reader 8.1.3 installer does not start on Windows 2003 x64
Hello,
i use Windows Server 2003 SP2 as 64 Bit edition on AMD and have installed Reader 8.1.2 successfully. Now i tried to install 8.1.3, which is the most recent of the 8th series i found, and fail because the installer simply does nothing! It starts up and then nothing happens. I've downloaded the EXE several times directly from Adobe with the same result.
What can i do?Sorry, i still don't get why 8.1.2 runs perfectly (and yes, there is a 64bit support for Windows 2003 Server!) and 8.1.3 did not even start. That makes no sense to me.
And because i want do deploy 8.1.3 even update is no alternative for me. -
The flash player installer does not start
Operating system version: Windows 7 32bit
Web browser and version Firefox 34.0
A brief explanation of the problem, including exact error messages received
When I try to start the installer it doesn't start visually. It Meaning, it appears for several seconds as a process in the Task manager, but it closes after a few seconds.The windows prompts me if the program can make adjustments to my hard drive and I accept it.
If I try to run it twice, in the short time window when it`s visible in the Task manager, there`s an error message that the installer is running.
Please, if you have a suggestion why this is happening, share it with me.
I apologize if there`s such topic available but I was not able to find it.
Regards,
JigiHi Georgi Filipov,
Are you using the online installer (about 1.2 MB file size)? If so, please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section. There are three different files and you'll want the one(s) that corresponds with the browser(s) you're using.
Maria -
Solaris 10 10/08 installation does not start
Hi,
I have AMD Athalon Processor, 80GB HDD, 1GB Ram and PS/2 mouse and keyboard. I have checked Sun's hardware compatiablity list(HCL). My PC is fully supported on solaris. I have installed solaris 08/07 x86 and OpenSolaris 11/08 on my PC few days ago.
As the Sun released new solaris 10/08, i thought to take a try. I downloaded the '.iso' dvd image file for solaris x86 10/08 on windowsXP twice. Then burned it on rewritable dvd using nero with option of "Burn Image to Disc".
But after all this, when i put the dvd in the drive and try to boot the PC then nothing happens and the system starts booting from hard disk.
Why my system is not booting from the DVD?
Is that DVD not a bootable disc at all?
Or the solaris dvd image files that i downloaded are not bootable?
What's wrong and where?
Somebody help me....My "server" also fails to boot off the 10/08 DVD. 8/07 works fine. I tried booting the 10/08 media I received from Sun, that failed. I also downloaded the ISO (and confirmed the MD5 checksum) and it too failed to boot. This is an old P3-650, but it strange that the 8/07 DVD boots just fine, while 10/08 doesn't boot at all (5/08 boots, but hangs at the initial kernel version messages).
-
Even with antivirus off, scripting turned on, cannot install either reader or flash. Java is installed. PC is new Windows 7 Pro.
Try the offline installer from http://get.adobe.com/reader/enterprise/
Flash Player:
Flash Player for Internet Exporer - ActiveX
Flash Player for Firefox - NPAPI -
When i plug in my ipod nano, the installer does not start
it just opens the window to see what is in the ipod. nothing happens.
try a different usb port, or try the wall charger, change ipod usb wire, turn ipod on to see if the low battery screen pops up by holding onto the switch above the ipod. try that stuff
-
Hi, I have a computer with windows 7 64 bits, and I install the trial version of cs6 to see how it works because we have a license of captivate cs5, but after the installation, does not start, then I try installing the cs5 version, and happend the same, does not start, just appears the logo and appears loading, but nothing happend with both versions, do you have any idea why??' the computer is new...I cannot find why , can you help me???.....thanks...
Angie.Hi there,
Please check this forum thread: http://forums.adobe.com/thread/1208568?tstart=120
Please try these steps.
I hope that may help.
Thanks. -
Ora10g_win64_cient Setup.exe does not start
Hello Everybody,
I downloaded ora10g_win64_client (10.1.0.2) and I try to install it on Windows 2003 Enterprise SP1 for Itanium 2 but when I try to launch setup.exe then a black windows named Oracle Universal Installer appear on the screen.
On this window the following message are displayed...
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\ADMINI\~1\LOCALS~1\Temp\1\OraInstall2007-01-23_06-04-52PM. Please wait...
After 5 seconds the window disappear and the Oracle Universal Installer does not start.
Do you have any idea to solve that problem?
Thanks and best regards
David LindemannHi,
Thanks for your reply to my thread but I already did what you suggested without success and after further investigations we found that the problem is in the jre. The java.exe does not work, it return an unknown error. We tried to download the jre from SUN in order to use it instead of the one delivered by Oracle and it worked the installation succeeded.
But now we have a new problem, the Network Configuration Assistant does not work an exception is throw by the oranjini10.dll
David Lindemann -
Adobe AIR Application Installation will not start
I purchased a program called Video Alchemy which requires Adobe AIR to run but the installation window will not display and the installation does not start.
The Adobe AIR log install log file can be found here https://dl.dropboxusercontent.com/u/59423416/Install.log
Here is a link to the VideoAlchemy.exe install file https://dl.dropboxusercontent.com/u/59423416/VideoAlchemy.exe
Can anyone help me to get this program to install?Thanks for the reply and solution MrSykes.
I uninstalled adobe AIR and ran a file and registry cleaner to delete any left over files and installs.
Then installed the v.15 Adobe AIR beta as recommended.
The cleaners I used (ccleaner & jv16 power tools) did find some temporary install files and remnants of the Video Alchemy install.
Tried the install again and still no installation window displays.
I'm running Windows 7 on my PC and even changed the installation file compatibility to Windows XP service pack 2 to no avail.
Funny that it installed fine on my notebook with Adobe AIR latest version running Windows 7.
I'm watching task manager as I'm attempting the install and videoalchemy.exe has some cpu usage then drops to zero activity.
Then Adobe AIR application Installer starts up then cycles to zero cpu activity.
I'm stumped on this one :-(
Thanks again for investing the time on my behalf.
Regards
Stephen
Maybe you are looking for
-
I have an older I-pad and have recurring spam. How do I stop it ??? I delete it every day and then delete the trash folder but it keeps coming back. Thanks.
-
Not displaying column names in dynamic pages?
I'd like to use a dynamic page as a detail page. In doing this I need a bit more freedom of design than what I now know is possible. Most important - I only need to print out the values returned by the SQL, not the column names as well. And I need to
-
Sending thumbnail of images to client on request using servlet/jsp
hi can anybody tell me how can we send thumbnail of more than one image to client using servlet or jsp just the way we thumbnail of images in google
-
Hello, I have a big problem and That battery starts my laptop: http://www.dearbattery.co.uk/compaq-presario-cq71-battery.html , And the laptop (only 7 months old by the way) you can not start! Now my question is, HAS something to do with the charging
-
Reduce the screen format in Mobile Data Entry
Hi, How can I reduce the screen format for my mobile data entry. I just have in standard 16X20 and 8X40 Can I create or choice another format? we need a smaller one because we can't read all the data on the scanner Thanks Dede