Sap ecc 5 and 6 material

dear friends,
can u send me fi/co ecc 5 or 6 material, i.e., acxxx series pdf files, and closing cockpet material,
i will reward u excellent points,
regardsx,
rajendra

dear friends,
my id is [email protected], please send me ecc 5 or 6 material, fi/co materail, especially acxxx series files,
i will reward u suitable points,
regards,
rajendra

Similar Messages

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • SAP EarlyWatch Alert in SAP ECC and SAP PI

    Hi Experts,
    Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
    Example as below:
    Initial System
    Initial Action
    Total Resp. Time in s
    % of RFC Load
    Avg. Response Time
    Avg. CPU Time
    Avg. DB Time
    Avg. Roll Wait Time
    PI
    SAPMHTTP
    200.261
    15,00
    600,3
    70,4
    165,4
    1,5
    The total response time in SAP ECC by PI system is 200261 secs.
    I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
    Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
    Thanks in Advance.

    Hello Pascal,
    No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
    This is because of the fact that the checks for both these system types are different.
    Regards
    Amit

  • Vendor Number Range Conflict SAP ECC and CRM 2007

    I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts).  What is the best approach to dealing with this issue...
    My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
    eg SAP Vendor "50000001" equates to CRM "VEN50000001"
    Is such as approach supported?  Can you point me to the documentation that shows how such an approach could be implemented.  What approaches have others done to address similar issues?
    Thanks in advance
    Eddie
    By the way we are on CRM 2007 sp4

    Hi Eddie,
    SAP Note 1044637 - Customize Vendor Numbers
    Implement the code present in the attachment. You can
    change it according to your own requirements. The example code
    suffixes 'VEND' before the first six digits of the vendor
    number before it is downloaded to CRM.
    Thanks,
    Vaibhav Shah

  • What oracle edition required for sap ecc and ep in one box

    hi friends
    what oracle edition required for sap ecc  installation which supports the  HA and disaster recovery plan
    10g
    1. Oracle Database Standard Edition One 10 g
    2. Oracle Database Standard Edition  10g
    3.Oracle Database Enterprise Edition  10g
    3. Oracle Database Express Edition  10g
    4. Oracle Database Personal Edition  10g
    thanks in advance  friends
    regards
    raja

    hi,
    I believe that SAP only support enterprises edition one because you'll get all database features.
    ardhian
    http://sapbasis.wordpress.com

  • How to or Step by step to connect SAP ECC and Data Integrator

    Hi,
    I need a document How to or Step by step to configure and connect SAP ECC 6.0 and Data Integrator or Data Services.
    someone help me?
    thanks!!

    Antonio,
    Please find the detail guide step-by-step document for different connectivity types at this following link on SDN under business Object section.
    [http://wiki.sdn.sap.com/wiki/display/BOBJ/ConnectingtoSAP]
    Thanks,
    Ashok

  • SAP ECC and  SCM 5.0,   CIF question

    I have set up ECC to connect to SCM 5.0 via  CIF, and have tested the RFC connections.   Test results say it's working.
    Now what are the next steps?   LiveCache?  I have a material in APO  which needs to talk to liveCache to withdraw some data.  Can someone give me some direction on the steps to follow after SCM  installation? Thanks!!!

    Mon_Ami,
    It depends upon what business requirement you are trying to fulfill.  You say you want to withdraw some data from livecache.  What data?  Why?
    Do you want to forecast your company's demand?  Do you want to create supply elements?  Do you want to perform Availability checks?  Do you want help in determining the best planning solution for a planning problem, based on constraints that you define?  Or.....?
    There are many business requirements that can use SCM as a solution.  Normally, one doesn't implement SCM without having a concrete business requirement.  What is yours?
    Best Regards,
    DB49

  • Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help the client in Data Mapping activity.

    Hello All,
    Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help in Data Mapping activity.
    Thanks,
    Mownesh

    There are standard templates in HCI data sources.
    e.g. 1) Customer Master data template is SOP_MD_CustomerMaster for extracting master data from SAP ECC and load it to S&OP
    KNVP is the table for customer in ECC from that you can select the fields as required
    KUNNR for customer Number
    ADRNR for Address
    List of a few commonly used table names of ECC:
    Product Related:
    MARA – Material Master (MATNR)
    MARC – Material Master with Plant Data (MATNR, WERKS)
    MARD – Material Master with Storage Location Data (MATNR, LGORT, WERKS)
    MAKT – Material Master Material Descriptions (MATNR, MATKL)
    MBEW – Material Valuation Data (MATNR, BWTAR)
    MVKE – Material Master : Sales related Data
    MDKP, MDTB – MRP related Data( Header, Item)
    MCHA, MCHB – Material Batches (Header, Item) (MATNR, WERKS, LGORT, CHARG)
    Vendor/Supplier related:
    LFA1 – vendor data (LIFNR)
    LFB1 --  Company Code Segment : Vendor Data(LIFNR, BUKRS)
    LFC1 --  FI Related Vendor Data (LIFNR, BELNR)
    LFM1 – Pur. Orgn. Related Vendor Data (LIFNR, EKORG)
    PReq/PO, BOM Related:
    EBAN – Pur. Req. Data( BANFN, BNFPO, BADAT, MATNR)
    EINA – Purchase Info. Record(General Data)(INFNR, MATNR, LIFNR)
    EINE – Purchase Info. Record (pur. Orgn. Data) (INFNR, EKORG)
    ELBK, ELBN, ELBP – Vendor Evaluation Related Data
    EKKO – PO Data (Header) (EBELN, BSTYP, BSART)
    EKPO – PO Data (Item) (EBELN, EBELP, MATNR)
    Pur. Req., RFQ and PO are differentiated by Doc Type (BSTYP) in EKKO table.
    For RFQ it is ‘A’ and for PO it is ‘F’
    MKPF – GRN Data (Header) (EBELN, BLDAT, BUDAT, XBLNR, BKTXT)
    MSEG – GRN Data(Item) MBLNR, BWART, LIFNR, MATNR, EBELN)
    Apart from this there are lot of tables which begin with ‘M’ & ‘E’, but we
    use the following very often.
    EQUK – Quota (Header)(QUNUM, MATNR)
    EQUP – Quota (Item) (QUNUM, QUPOS, LIFNR)
    EKBE – PO History Data (EBELN, EBELP, BELNR, BLDAT, MATNR, VGABE)
    EKBZ – PO History with Delivery Costs(EBELN, BELNR, LIFNR, XBLNR)
    EKET – Schedule lines data of a PO(EBELN, EINDT, SLFDT)
    EKES – Vendor Confirmations Data (EBELN, EBTYP, EINDT, XBLNR)
    T163F – Confirmation Texts (EBTYP, EBTXT)
    T156 – Movement Types (BWARE)
    T024 – Purchasing Groups
    T024E – Purchase Organizations
    T163 – Item Category’s in Purchasing Documents(PSTYP)
    T149D – Valuation Types
    T134 – Material Types
    FVLK – Delivery Types
    STKO, STPO – BOM(Bill Of Material) related Data (Header & Item)
    STPU, STPN, STST, STZU – BOM Related Tables
    RKPF, RBKP, RSEG (Header & Item) – MM – FI Related Data
    KONO, KONH – Pricing data
    T006 – Basic Unit Of Measurements
    Customer/Sales Order Related:
    VBAK : Sales Document(Header Data) (VBELN)
    VBAP : Sales Document(Item Data) (VBELN, POSNR, MATNR, ARKTX, CHARG)
    Enquiry, Quotation, Sales Order are differentiated based on Doc.
    Type(VBTYP Field) in VBAK, VBAP Tables for Enquiry VBTYP = A, for Quotation ‘B’ & for Order it is ‘C’.)
    LIKP : Delivery Table(Header Data) (VBELN, LFART, KUNNR, WADAT, INCOL)
    LIPS : Delivery Table(Item Data)(VBELN, POSNR, WERKS, LGORT, MATNR, VGBEL)
    (LIPS – VBGELN = VBAK- VBELN, LIPS-VGPOS = VBAP-POSNR)
    VTTK : Shipment Table(Header Data) (TKNUM)
    VTTP : Shipment Table (Item Data)(TKNUM, TPNUM, VBELN)
    (VTTP – VBELN = LIKP – VBELN)
    VBRK : Billing Table(Header Data) (VBELN, FKART, BELNF)
    VBRP : Billing Table(Item Data) (VBELN, POSNR, FKIMG, NEWR, VGBEL, VGPOS)
    (VERP – AUBEL = VBAK- VBELN, VBRP – VBEL = LIKP – VBELN)
    Apart from these tables there are lot of other tables which starts with ‘V’, but we use the
    following tables frequently.
    VBUK: All Sales Documents status & Admn. Data(Header) (VBELN, VBTYP)
    VBTYP = ‘C’ (Sales Order) VBTYP = ‘L’(Delivery) VBTYP = ‘M’(Invoice)
    VBUP: Sales Documents status & Admin. Data(Item) (VBELN, POSNR)
    VBEP : Sales Document Schedule Lines Data (VBELN, POSNR, EDATU, WMENG)
    VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
    VBFA: Sales Document flow data(VBELV, VBELN, POSNV, VBTYP)
    VBPA: Partner functions Data(VBELN, PARVW, KUNNR, LIFNR)
    TVLKT: Delivery Type: Texts(LFART, VTEXT)
    KNA1, KNB1, KNC1 : Customer Master Data and Other Partner’s Data(KUNNR,
    NAME1,LAND1)
    KNVK: Customer Master Contact Person(PARNR, KUNNR)
    KNVV: Customer Master Sales Data.
    LFA1, LFB1, LFC1: Vendor Master Data(To get Transporter data)(LIFNR, NAME1, ORT01)
    MARA, MARC, MARD : Material Master Data(Basic, Plant, St. Location Views)
    TVKO: Sales Organizations(VKORG)
    TVKOV: Distribution Channels(VTWEG)
    TVTA: Divisions(SPART)
    TVKBZ: Sales Office(VKBUR)
    TVBVK: Sales Group(VKGRP)
    T077D: Customer Account Group(KTOKD)
    T001W: Plants(WERKS)
    T001L: Storage Locations(LGORT)
    TWLAD: To get address of Storage Location and Plant(LGORT, ADRNR)
    TVAU: Sales Document (Order) Types
    KONV: Condition Types (pricing) (KNUMV, KSCHL, KWETR)
    T685T: Condition Types Texts.
    ADRC: To get Addresses of Partners
    VBBE, VBBS: Sales Requirements Data
    VBKA: Sales Activities Data
    VBPV: Sales Document Product Proposal
    Based on the functionality you can search ECC table names and fields
    Hope this information is helpful for you.
    Thanks and Regards,
    Anjali

  • Difference between SAP CRM Security and SAP ECC 6.0 security

    Hi
    I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
    Can anyone please let me know the difference between CRM security compared to  ECC security.
    Thanks...

    I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
    really sad.....
    The big  difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
    1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
    2)  If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
    E.g. transaction code BP allows you to create/change/display  any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
    another example is business transaction processing...which can be launched by:
    a very generic transaction code: CRMD_ORDER
    transaction category related transaction codes :e.g.
          > CRMD_BUS2000126 for activity management
          > CRMD_BUS200115 for Sales processes
    Again...allowed activity is not controlled by the tcode, but on authorization object level...
    3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links....  controlled by object UIU_COMP.
    However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
    Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
    STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
    4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
    This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
    You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
    cheers
    Davy Pelssers

  • Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

    Hi,
    I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to  Broadcast from Crystal reports?
    I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
    What is best option for email/broadcasting for Crystal Reports?
    Your help is appreciated.
    Thanks.
    SVK.

    Hi,
    I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
    Ingo

  • Idocs are not prosessing even after ALE settings in SAP XI and ECC

    Hi Experts!,
                     <b>I have a system which has SAP ECC and SAP XI 3.0 installed with 2 instances  on the same operating system. ( In MMC you can see ECC and XI under the same SAP console tree ).
    I have made many times all possible ALE settings between ECC and XI and I was unable to deliver the IDOC [ Idoc scenario- unable to get the IDOC in the receiver side (R3)]
    Could any one please let me know how to solve this issue.
    Useful answers will be rewarded.
    </b>
    Thanks in advance!,
    Sunil

    Hi Martens,
                    I appreciate your kind reply, error : Unable to convert ALE logical system.., this is the error message I am getting, while I do File to IDOC scenario. So what may be the wrong thing in this configuration, Have done ALE settings ( Log sys, assign log sys, partner profile, port and RFC connection from R3 to XI).
    So could you please let me know the solution.
    regards,
    Sunil

  • Deploying / Transporting SAP HANA-ECC and BW Solution?

    Is there one centralized deployment guid for SAP  HANA solutions in the SAP ECC and SAP BW environment?
    Please can one of you provide some directions to a centralized guide to move / deploy SAP HANA solutions build in one system to Quality and/or production environment?

    Rama,
    there's a pretty straight forward export/import functionality for moveing models from dev to qa and prod. Please see the SAP HANA Modeling Guide, chapter "Processing Information Objects".
    You can also use CTS+ in conjunction with this functionality.
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • Master Data in SAP SRM and SAP ECC

    Hi all,
    I have the following question: after I create a vendor in SAP ECC and, than, I replicate it in SAP SRM (through transaction BBPGETVD):
    1. if I modify all field of vendor on SAP ECC, is there an   
       authomatic way which update vendor data on SAP SRM, or  
       it is possible only through BBPUPDVD transaction?
    2. if I modify all field of vendor on SAP SRM, is there an   
       authomatic way which update vendor data on SAP ECC, or is it possible through some transaction?If yes, what is it?

    Hi Maria,
    You can execute BBP_VENDOR_GET_UPDATE_JOB report using SA38 txn. to automatically replicate vendors from R/3 to SRM.
    Schedule a back ground job for this report depending upon the frequency of update that is every day or every hour based on your requirement.
    The report BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
    Make the Global settings for vendor replication and synchronization in SPRO
    SPRO -- > IMG ---> Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
    There is no automatic way for updating vendors in R/3 after making changes in SRM.
    Hope this makes you more clear. Clarifications are welcome.
    Award points for helpful answers.
    Rgds,
    Teja

  • Transfer of data from SAP ECC 6.0 to E-Recruitment

    Hi,
    We are implementing E-recruitment . SAP ECC and E-Recruitment are running in different servers.How to transfer data from following Infotypes from SAP ECC 6.0 to E-Recruitment .
    IT0002 – Personal Data to 5102 – Candidate Information
    IT0006 – Address Data to 5110 – Address Rule
    IT0105 – Communication Data to 5110 – Address Rule
    IT0022 - Education to 5104 - Education
    IT0023 – Others/Previous Employers to 5103 - Work Experience
    IT0024 - Qualifications to 5105 - Qualifications
    Regards,
    Somi .

    Hello,
    in general IT5103, 5104 and 5105 are not part of the standard distribution model. Without special customer own ALE development you will not be able to transfer these information.
    Check SLG1 - application log for entries.
    did you the initial data upload or did you only transfer changes?
    If you did the initial data transfer be sure the user running the IDOC import has the correct rights. Be sure noone changed the usage of IT0000 STAT2 as e-recruiting expects value 3 for active employees. Furthermore be sure to be informed about the handling of hirings in future.
    If you only wanted to transfer updates. PFAL is not the right way. Be sure you activated the change pointers correctly. Use RBDMIDOC. And be sure to implemet the latest Notes. There had been an error that changes were only processed in e-recruiting if at least IT0000, 0001 and 0002 were changed which resulted in problems when only IT 0006 was updated. In this case the update was not transfered to e-recruiting.
    Best regards
    Roman Weise

  • Real time job doesn't receive automatically changes in SAP ECC 6

    Hi Experts,
    <br/>
    <br/>I'm trying to (using Data Integrator) automatically retrieve data from SAP ECC and store it in a local database table. I followed the steps written in this article: http://wiki.sdn.sap.com/wiki/display/BOBJ/Receiving+IDOCs. I'm modifying some records in the Cost Center Master Data (CSKS) and using COSMAS01 as the IDOC in which I'm trying to send the information.
    <br/>
    <br/>All seems to be OK, since I manually sent a Cost Center data row using the /nbd16 transaction, SAP ECC displayed a message telling that an IDOC had been generated. Also, when I checked the IDOC status in BD87 it had status 03, meaning that it had been sent correctly.
    <br/>
    <br/>In Data Services when I clicked on 'View Data' in the local database table that I put in the dataflow I could see the rows that I manually sent from the ECC. However, after truncating the local table, it bothered me that when I tried to send manually a second IDOC with another row from the Cost Center Master Data table, my real-time job didn't receive the request and consequently didn't insert the desired rows. I didn't change anything in the configuration, so my first question to any of you is that if you know what could it be that causes my real-time job to not receive the request from ECC?. I tried making a third try, but at my company they had to shut down the ECC server, so it's going to be a while before I make another try.
    <br/>
    <br/>Now, the REAL question of this post is that after I sent the first IDOC successfully (and before sending manually the second one mentioned earlier), I changed a record in the CSKS table directly in the ECC, hoping that it would automatically generate an COSMAS01 IDOC and send all the data in the table to the Data Integrator. This didn't happen and no IDOC was generated, so do any of you know why the automatic change didn't trigger the sending of the IDOC with the data?
    <br/>
    <br/>As I said before, I made the configuration in ECC and DI following the steps in the link written at the start of the post, and it was tested OK by successfully sending a COSMAS01 IDOC once, manually using bd16.
    <br/>
    <br/>In advance I thank you all for your cooperation. This is my first thread in the SDN forum so also please excuse any mistakes in my english.
    <br/>
    <br/>Best regards...

    You do not need to schedule this job every 10 min.  Why?
    If we can't schedule this job every 10 mints how can I able to retrive the delta records into Queue(RSA7)
    What is your advice I mean how to schedule in order to get the delta?
    Thanks

  • How to install BI-CONT 7.37 in SAP ECC system EHP 5

    Hi SAP Gurus,
    We recently upgraded BI_CONT in our BW landscape(SAP netweaver 7.3) from 7.36 to 7.37
    What is the strategy to upgrade BI _CONT or corresponding changes in SAP ECC system(EHP 5).
    Currently we don't have BI_CONT installed in our  ECC system.
    KIndly, let me know how to upgarde BI_CONT related objects.
    Earlier we used to use custom extractors and data sources in ECC system for BI_CONT now we business has planned to use all standard data sources.
    Question here is do we need to install BI_CONT in SAP ECC and what is the procedure?
    Thanks,
    Avadhesh
    +91 8095226536

    Hi Avadhesh,
    No need to upgrade or install add-on BI CONTENT in ECC system if you have already BI landscape for doing BI functions.
    BI content includes below functionality which can be installed as an add on in ECC when you dont have BI landscape.
    DataSources
    Process chains
    InfoObjects
    InfoSources
    Transformations
    InfoProvider (InfoCubes and DataStore objects)
    Variables
    Data mining models
    Queries
    Workbooks
    Web templates
    Roles
    Aggregation level
    Planning function
    Planning function type
    SAP Crystal Reports (BI Content Ext.)
    SAP BusinessObjects Dashboards (BI Content Ext.)
    Regards,
    Karthik

Maybe you are looking for