SAP ECC 6.0 and EHP5 Installation with DIMP functionatilty

Hi Frineds,
We are installaing ECC6.0 and EHP5 fresh installation and looking for DIMP functionality too active in the system.
If we do only installation only  Central Application Usage type then we can directly install EHP5 system  (Central Application consist of SAP_APPL & EA-APPL).
But My question can we get the DIMP also after this installation type or we need to first install ECC6.0 and then upgrade EHP to get the DIMP function..I have not seen this answer any where in the guide or in SDN...
Thanks.

Hi Manas,
ECC-DIMP is a add-on to ECC so you can install this add-on or perform a delta upgrade.
Relevant installation and support packages are available on SAP Service Marketplace.
Check Note 874473 - Release strategy for ECC-DIMP as of ECC 6.0
Many Thanks.
Ravindra Mirashi

Similar Messages

  • File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

    Hello,
    We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
    All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    If anyone able to help me with required Solaris file system. it will be great help.
    Please let me know if there is any query.
    Thanks.

    > All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    > But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
    > Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    So you'd need to read the installation guides
    Markus

  • Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module

    Dear All,
    I would like to know the know the Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module. I have already gone throught the release notes and
    upgrade erp in service.sap.com. I have also checked solution browser.
    Its Urgent.
    Regards,
    Rakesh

    Hi Rakesh,
    Some of the differences are:
    1. Document Flow
    In ECC 6.0, The flow of sales documents is seen much better and improved as compared to 4.6C. Once You look at the screen, You will clearly figure out the difference.
    2. Sales Order Look and Feel
    There are more tabs in ECC 6.0  for Item Level Details.
    The Sales Doc. appears as supremely perfect.
    3. ECC 6.0 is built on NetWeaver Technology  (that possess SOA i.e. service oriented architecture) , Hence more reliable and Improved as compared to previous one.
    Hope this will help you. Reward if found useful
    Regards,
    Gaurav Raghav

  • SAP R-3 IDES 4.71 installation with Oracle9i

    Hello
    I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
    INFO 2008-05-14 22:50:30
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-05-14 22:53:59
    See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
    TRACE
    ProgramReturnCode='-1' means error.
    ERROR 2030-05-14 22:53:59
    MOS-01012  PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
    Windows 2003 Server
    AMD 2GH Dual core
    2GB Ram
    250GB HDD
    Computer name: bw2003
    Central instance: DEV
    I checked the host file system32/drivers/etc the IP adress and the host name is there.
    I am hoping  that someone could help me with the installation  thanks in advance.
    waiting .....

    ok here you go
    dev_disp
    trc file: "dev_disp", trc level: 1, release: "620"
    Sat May 18 00:27:08 2030
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        2276
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          9776     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 042F0040, size: 1974816)
    DpShMCreate: allocated sys_adm at 042F0040
    DpShMCreate: allocated wp_adm at 042F0560
    DpShMCreate: allocated tm_adm_list at 042F2B90
    DpShMCreate: allocated tm_adm at 042F2BB8
    DpShMCreate: allocated wp_ca_adm at 0448F878
    DpShMCreate: allocated appc_ca_adm at 04493EC8
    DpShMCreate: allocated comm_adm_list at 04495638
    DpShMCreate: allocated comm_adm at 04495650
    DpShMCreate: allocated ca_info at 044C4450
    DpShMCreate: allocated wall_adm at 044C4458
    MBUF state OFF
    Sat May 18 00:27:09 2030
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
    <ES> 306 blocks reserved for free list.
    ES initialized.
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c      2599]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1451]
    Sat May 18 00:27:18 2030
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    Sat May 18 00:27:32 2030
    CCMS: start to initalize 3.X shared alert area (first segment).
    Sat May 18 00:27:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    Sat May 18 00:27:50 2030
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:29:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W0 (pid 2328) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 2416) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    my types changed after wp death/restart 0xbf --> 0xaf
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:30 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W5 (pid 2368) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W6 (pid 2376) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W7 (pid 2384) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    my types changed after wp death/restart 0xaf --> 0xad
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W2 (pid 2344) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    ERROR => W8 (pid 2392) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W10 (pid 2408) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    ERROR => W12 (pid 2424) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    my types changed after wp death/restart 0xad --> 0x89
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:30:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W1 (pid 2336) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    Sat May 18 00:30:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:30:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W3 (pid 2352) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W4 (pid 2360) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W9 (pid 2400) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    Sat May 18 00:32:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:51 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:33:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:11 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:13 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:33 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:37:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:30 2030
    caught signal 2
    Sat May 18 00:40:42 2030
    ***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c   7883]
    dev_w0
    trc file: "dev_w0", trc level: 1, release: "620"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Sat May 18 00:27:19 2030
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
    B  New connection 0 created
    M  systemid   560 (PC with Windows NT)
    M  relno      6200
    M  patchlevel 0
    M  patchno    674
    M  intno      20020600
    M  pid        2328
    M 
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c   1028]
    I  MtxInit: -2 0 0
    M 
    M Sat May 18 00:27:24 2030
    M  DpShMCreate: sizeof(wp_adm)          9776     (752)
    M  DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    M  DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpShMCreate: sizeof(comm_adm)     192000     (384)
    M  DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04AF0040, size: 1974816)
    M  DpShMCreate: allocated sys_adm at 04AF0040
    M  DpShMCreate: allocated wp_adm at 04AF0560
    M  DpShMCreate: allocated tm_adm_list at 04AF2B90
    M  DpShMCreate: allocated tm_adm at 04AF2BB8
    M  DpShMCreate: allocated wp_ca_adm at 04C8F878
    M  DpShMCreate: allocated appc_ca_adm at 04C93EC8
    M  DpShMCreate: allocated comm_adm_list at 04C95638
    M  DpShMCreate: allocated comm_adm at 04C95650
    M  DpShMCreate: allocated ca_info at 04CC4450
    M  DpShMCreate: allocated wall_adm at 04CC4458
    X 
    X Sat May 18 00:27:28 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M 
    M Sat May 18 00:27:33 2030
    M  calling db_connect ...
    C  Got ORACLE_HOME=C:\oracle\ora92 from environment
    C 
    C Sat May 18 00:28:05 2030
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C 
    C Sat May 18 00:28:06 2030
    C  Logon as OPS$-user to get SAPDEV's password
    C  Connecting as /@DEV on connection 0 ...
    C  Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
    C 
    C Sat May 18 00:28:17 2030
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C 
    C Sat May 18 00:28:33 2030
    C  Now I'm connected to ORACLE
    C  Got SAPDEV's password from table SAPUSER
    C  Got SAPDEV's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C 
    C Sat May 18 00:28:34 2030
    C  Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C  Now I'm connected to ORACLE
    C  Database NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
    B 
    B Sat May 18 00:28:35 2030
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  20300518 002733 BW2003
    M 
    M Sat May 18 00:28:36 2030
    M  db_connect o.k.
    I 
    I Sat May 18 00:29:01 2030
    I  MtxInit: 0 0 0
    X 
    X Sat May 18 00:29:02 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13
    B  dbtbxbuf: Buffer TABL  (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
    B  dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 276 = 276
    B  2: 13 * 20 = 260
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 128 = 256000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 100 = 100
    B  7: 65 * 4 = 260
    B  8: 29385 * 128 = 3761280
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    I  *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
                  ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete.  [shmnt.c      2055]
    I  *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c      469]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Intel unknown
    Processor-Count           : 1
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 1
    NT Pagefile Informations
    Config. minimum size      : 589824 K
    Config. maximum size      : 1179648 K
    Avail.  maximum size      : 1179648 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    C:\pagefile.sys
    589824 K
    1179648 K
    1179648 K
    1178900 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           :        0
    Commit Charge Total       :  1670224 K
    Commit Charge Limit       :  1676596 K
    Commit Charge Peak        :  1670376 K
    Phys.Memory Total         :        0 K
    Phys.Memory Available     :        0 K
    File Cache                :        0 K
    Kernel Memory Total       :        0 K
    Kernel Memory Paged       :        0 K
    Kernel Memory Nonpaged    :        0 K
    Memory usage of current process
    Total virt.address space  :  2097024 K
    Avail.virt.address space  :  1133576 K
    Private Pages             :        0 K
    Total heap size           :    10729 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :     4108 K
    Allocated heap memory     :     4406 K
    Moveable heap memory      :       24 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    4
    72 K
    2100 K
    0 K
    0 K
    3
    352
    smss.exe
    212 K
    448 K
    144 K
    160 K
    0
    424
    winlogon.exe
    996 K
    9048 K
    6188 K
    6580 K
    3
    468
    services.exe
    1276 K
    3136 K
    1436 K
    1564 K
    0
    480
    lsass.exe
    2148 K
    6544 K
    7048 K
    7048 K
    1
    676
    svchost.exe
    552 K
    2508 K
    832 K
    832 K
    0
    848
    svchost.exe
    4840 K
    22520 K
    13348 K
    19208 K
    9
    972
    spoolsv.exe
    712 K
    4060 K
    3220 K
    3228 K
    1
    1124
    svchost.exe
    392 K
    1956 K
    476 K
    476 K
    0
    1176
    agntsrvc.exe
    948 K
    7720 K
    9128 K
    9128 K
    1
    1196
    TNSLSNR.exe
    2432 K
    5720 K
    5764 K
    5776 K
    1
    1212
    cmd.exe
    384 K
    1572 K
    1488 K
    1488 K
    0
    1228
    ORACLE.EXE
    122564 K
    135924 K
    203080 K
    205256 K
    38
    1324
    SAPSTARTSRV.EXE
    2520 K
    13364 K
    14828 K
    14828 K
    3
    1420
    VMwareService.exe
    928 K
    2164 K
    604 K
    604 K
    0
    1528
    dbsnmp.exe
    2240 K
    11312 K
    13608 K
    39264 K
    3
    1816
    Explorer.EXE
    2928 K
    15120 K
    10200 K
    10332 K
    13
    1864
    jusched.exe
    252 K
    1764 K
    432 K
    432 K
    0
    1872
    VMwareTray.exe
    724 K
    3144 K
    852 K
    888 K
    0
    1880
    VMwareUser.exe
    1376 K
    3284 K
    1032 K
    1048 K
    0
    1996
    svchost.exe
    488 K
    3740 K
    1440 K
    21664 K
    1
    216
    svchost.exe
    800 K
    3708 K
    2788 K
    2788 K
    0
    2080
    sapinst.exe
    82868 K
    105272 K
    84324 K
    105292 K
    41
    2088
    javaw.exe
    6944 K
    21272 K
    20396 K
    20896 K
    6
    2200
    startsap.exe
    460 K
    1772 K
    748 K
    748 K
    0
    2212
    sapstart.exe
    1244 K
    3176 K
    1188 K
    1188 K
    0
    2276
    disp+work.exe
    [DP] DEV_00
    26740 K
    42464 K
    30176 K
    30176 K
    10
    2312
    gwrd.EXE
    [GW] DEV_00
    1852 K
    6116 K
    3936 K
    8208 K
    1
    2320
    icman.EXE
    56440 K
    60192 K
    75880 K
    75880 K
    17
    2328
    disp+work.EXE
    [WP] DEV_00
    10700 K
    11516 K
    43684 K
    43788 K
    7
    2336
    disp+work.EXE
    [WP] DEV_00
    6696 K
    13084 K
    42180 K
    42180 K
    6
    2344
    disp+work.EXE
    [WP] DEV_00
    10896 K
    14092 K
    42180 K
    42180 K
    6
    2352
    disp+work.EXE
    [WP] DEV_00
    10088 K
    14588 K
    42176 K
    42176 K
    6
    2360
    disp+work.EXE
    [WP] DEV_00
    9320 K
    12960 K
    42184 K
    42184 K
    6
    2368
    disp+work.EXE
    [WP] DEV_00
    9480 K
    13076 K
    42184 K
    42184 K
    6
    2376
    disp+work.EXE
    [WP] DEV_00
    10060 K
    13220 K
    42180 K
    42180 K
    6
    2384
    disp+work.EXE
    [WP] DEV_00
    10024 K
    15128 K
    42184 K
    42184 K
    6
    2392
    disp+work.EXE
    [WP] DEV_00
    6576 K
    14752 K
    42180 K
    42180 K
    6
    2400
    disp+work.EXE
    [WP] DEV_00
    8812 K
    13436 K
    42184 K
    42184 K
    6
    2408
    disp+work.EXE
    [WP] DEV_00
    8552 K
    16140 K
    42180 K
    42180 K
    6
    2416
    disp+work.EXE
    25744 K
    25972 K
    41644 K
    43788 K
    10
    2424
    disp+work.EXE
    [WP] DEV_00
    6848 K
    11060 K
    42180 K
    42180 K
    6
    Sum
    460128 K
    1063904 K
    B  dbexpbuf[0]: Shm 54: create failed
    B  ***LOG BBF=> internal error in export/import buffer: object buf init fail   [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
    B  dbexpbuf: return code (sap_rc): 4
    B  Buffer 0 will not be available
    B  Unexpected returncode from db_exp_init(EXP_ATP) : 4
    B  db_objinit failed
    M  *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c  237]
    M  *** ERROR => ThIPCInit: hook failed [thxxhead.c   1656]
    M  ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1159]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   8437]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = -1
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    rfc_req = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
    M  *  ERROR       tskh_init: ThIPCInit
    M  *
    M  *  TIME        Sat May 18 00:29:02 2030
    M  *  RELEASE     620
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          17
    M  *  MODULE      thxxhead.c
    M  *  LINE        8569
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  237]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c   346]
    M  SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
    Thanks buddy
    waiting...

  • Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

    Hello ASUG Community.
    I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM.  The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
    The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
    The question I've been trying to design around is "where to store the SAP-MDM item number"?
    I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
    The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality?  It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s.  Or can this be done using the standard OCI functionality?
    I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
    Any insight would be most appreciated.
    Thanks.  Sincerely,
    Rich Wortmann

    I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
    Sorry not sure about the BADI to use.

  • Difference Between SAP ECC 6.0 and SAP Solution

    Dear Experts,
       We are in the process of implementing a new SAP Structure.
        We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
      So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
       If any comparison chart,  it would be helfull.
    Do reply asap.
    Thanks in advance,
    Nilesh Jain

    Hi Nilesh,
    Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
    SAP solution is of a bigger element and ECC 6 is a component of it.
    Regards,
    Rod

  • Differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0

    Hello SAP Gurus,
    Could someone please let me explain, what are the main differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0.
    Thanks
    Sha

    Hi,
    Check in this link
    http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english

  • PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface.

    PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface. Has anyone done it before?

    Hi Subhash,
    Please open this link to see the details:
    http://help.sap.com/saphelp_scm70/helpdata/EN/89/bd3e42ce98033be10000000a1550b0/frameset.htm
    You perform the data transfer in the following sequence:
    Plant
    Setup groups
    Work centers
    Routings
    You check the setup groups in SAP APO.
    You create the setup matrixes in SAP SCM.
    Thanks, Marius

  • SAP ECC 6.0 and mySAP ERP

    Hello Gurus,
    Could somebody tell me the difference between SAP ECC 6.0 and mySAP ERP
    Thanks and reward guaranteed

    Hi,
    These are versions of SAP.
    you can findout the differences between these two versions from the following link
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Regards
    Ali

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • I bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom

    i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also

        Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
    1) Ensure the device is powered off.
    2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
    3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
    4) When the restore screen appears (exclamation mark), release the Volume Down button.
    5) From the restore screen, press then release the following keys to initiate the reset process:
    1. Volume Up button
    2. Volume Down button
    3. Power button
    4. Volume Down button
    *Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
    If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
    -KristieQ_VZW
    Follow us on Twitter @VZW Support

  • AIX6.1+HACMP+DB2 9.1+SAP ECC 6.0 High Availablity Installation

    Dear All,
    This is to request you that anyone having a sure shot Installation guide /Solution to Install SAP in High Availablity using following platform.
    1. AIX 6.1
    2. DB2 9.1
    3. HACMP
    4. ECC 6.0 SR 2
    Note: Not Failover by scripting. High Availablity like Microsoft MCSC. Complete installation on Virtual host, IP and Shared File system/stirage.
    Please....................................................
    Regards
    Dharmendra

    Installing SAP NW07 SR3 with DB2 on AIX HACMP
    Scenario:-
    DB will run on Node A
    SAP CI will run on Node B
    If node A fails DB will failover to Node B
    If node B fails CI will failover to Node A
    Shared SAP and DB filesystem are in SAN
    Filesystems will failover accordingly
    Requirements:-
    SAP NW07 SR3 DVDs
    AIX Node A
    AIX Node B
    HACMP supports node failures. We are not using HACMP to probe Application (SAP/DB) failures. i.e. if SAP or DB process crashes HACMP will not failover the resource groups.
    /etc/hosts should have IPs of both nodes
    Assumptions:-
    PRD = PRD
    Node A hostname: dbserver
    Node B hostname: ciserver
    Shared filesystems
    These filesystems can be moved/ failed over (unmounted /mounted) from one node to another.
    /usr/sap/PRD
    /sapmnt/PRD
    /db2/PRD
    /db2/db2prd
    /db2/PRD/sapdata1
    /db2/PRD/sapdata2
    /db2/PRD/sapdata3
    /db2/PRD/sapdata4
    /db2/PRD/log_dir
    /db2/PRD/db2dump
    Users and Groups will be created by SAPINST.
    Please make a note of the UIDs as we have to use the same UIDs and GIDs on other node as well.
    User Home directory:- For prdadm please use a home directory on shared disk
    For e.g. /usr/sap/PRD/home/prdadm
    Use Distributed Installation option in SAPINST
    Installation steps:-
    Node A:
    Mount SAP filesystems
    Mount DB2 filesystems
    Check /etc/hosts that IP of both nodes are available
    Ping both nodes and check the IP address
    Check output of command ifconfig u2013a and confirm that both IPs are available
    Start SAPINST with SAPINST_USE_HOSTNAME option.
    For e.f.    ./sapinst SAPINST_USE_HOSTNAME=dbserver
    Step 1: Global host preparation (this should be easy to finish)
    Step 2: Database instance installation
    During this step note down UIDs and GIDs created by sapinst.
    During this step please choose /usr/sap/PRD/home/prdadm as user home for prdadm user.
    With SR3 DVDs db2 software will be installed in /db2/PRD/db2_software
    Step 3: Install SAP Central Instance with SAPINST_USE_HOSTNAME=ciserver
    Stop / Start SAP -> Login and confirm SAP instance is running fine.
    Shutdown SAP and DB2
    Add entries in .rhosts in home directory on user prdadm and db2prd
    For example in /usr/sap/PRD/home/prdadm/.rhots
    <IP Address of Node A> prdadm
    <IP Address of Node B> prdadm
    <all possible IP address> prdadm
    Similarly for /db2/db2prd/.rhosts
    <IP Address of Node A> db2prd
    <IP Address of Node B> db2prd
    <all possible IP address> db2prd
    Node B:
    Move SAP resources from Node A to B (i.e. SAP filesystems should become available on Node B)
    DO NOT MODE DB RESOURCES, Let it stay on Node A alone.
    Create /db2/PRD and /db2/db2prd directories (this should have some free space, 10 GB is good to go)
    Start SAP installation under Distributed installation option
    Step 1:  Global host preparation
    Temporarily change /etc/hosts and make the IP of dbserver same as ciserver.
    dbserver line should be written above ciserver line
    i.e. u2018ping dbserveru2019 and u2018ping ciserveru2019 should return same IP address on Node B (NOT NODE A)
    Step 2: Database instance installation with option SAPINST_USE_HOSTNAME=dbserver
    During this installation, make sure UIDs and GIDs are given same as in Node A.
    You can confirm the UIDs from /etc/passwd   and GID from /etc/group
    Also, make sure you specify user home for prdadm as /usr/sap/PRD/home/prdadm
    Once installation starts ABAP Load and one or two jobs are completed, please cancel the installation.
    as db2prd
    db2stop force
    db2start
    db2 connect to PRD
    It should be successful. This confirms the DB2 is setup properly.
    db2stop terminate
    db2stop force
    rm u2013r /db2/db2prd/*
    rm u2013r /db2/PRD/sapdata1
    rm u2013r /db2/PRD/sapdata2
    rm u2013r /db2/PRD/sapdata3
    rm u2013r /db2/PRD/sapdata4
    rm u2013r /db2/PRD/log_dir
    rm u2013r /db2/PRD/db2dump
    Retain these directories so that you can mount the shared filesystems from Node A to Node B during failover.
    Change and correct IP address in /etc/hosts of host dbserver, which we changed temporarily earlier.
    Failover DB resources to Node B
    Check if all DB2 filesystems are correctly available.
    On Node A, check and double confirm that there are no files/directories under /db2 and its subdirectories. i.e. all filesystems have come to Node B.
    In our case there was one filesystem /db2/PRD/db2prd which did not come to node B and we had to struggle a lot to find the same.
    CONTINUED BELOW !!!

  • Diff in SAP ECC 6.0 and Netweaver

    Hi Experts,
    I am working as SAP ABAP Consultant.
    I am new to SAP Netweaver with JAVA. I want to Learn SAP with JAVA also.
    Can any one tell me whether the SAP 6.0 is used for SAP NetWeaver developement with java
    or it needs some more than SAP ECC 6.0 for ABAP.
    Which java is used mostly in SAP?
    How to start learn JAVA for SAP?
    Awaiting helpful reply
    Thanks In  advance,
    Dhanu

    Hi Dhananjay,
    The SAP NetWeaver Application Server (SAP NetWeaver AS) defines the runtime environment both for Java- and ABAP-based applications in SAP NetWeaver. We refer to the Java-related parts of the server as SAP NetWeaver AS Java. The main part of SAP NetWeaver AS Java is the SAP J2EE Engine, a complete runtime system that can host applications in compliance with the J2EE 1.3 standard.
    The SAP J2EE Engine supports all the techniques that became popularized by J2EE - JavaServer Pages, servlets, Enterprise JavaBeans (EJBs), etc. - so that applications can be ported with minimal effort to SAP NetWeaver AS Java. However, SAP NetWeaver AS Java offers additional functionality on top of what is required in the J2EE 1.3 standard.
    Where should I store database tables of my combined ABAP/Java system?
    The important information here is: Please keep the database storage of your Java- and ABAP-based components separate:
    ABAP components access database tables stored in the “ABAP” database schema.
    Java components access database data stored in the “Java” database schema.
    Best, there is one database instance keeping both ABAP and Java schemas, namely the database instance that is already pre-configured during the SAP Web AS installation.
    Can my Java program modify data in the ABAP database schema?
    The important constraint is: In general, Java components do not access tables stored in the ABAP schema directly, via persistence APIs (for example, JDBC). Analogously, ABAP components cannot manipulate data in the Java schema.
    Don’t worry: Of course, Java components can read or modify data in the ABAP schema. But rather than accessing table data directly, they are intended to go around: In the Java code, you apply the application-level APIs (like SAP Java Resource Adapter API, web services, Adaptive RFC for Web Dynpro UIs) and ask the ABAP component to do the work on the database.
    Can I integrate Java and ABAP components in the scope of an application?
    Of course, you can combine Java and ABAP components in your systems. There are several technologies enabling reliable data exchange between them, like SAP Java Connector (SAP JCo), SAP Java Resource Adapter (SAP JRA), web services, and SAP Exchange Infrastructure (SAP XI) to name some.
    The below link helps u in understanding the connectors of java and sap.
    [http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/content.htm]
    Using the SAP Java Connector
    SAP’s new Java middleware, the SAP Java Connector (JCO) allows customers and partners to easily build SAP-enabled components in Java. JCO supports both inbound (Java calls ABAP) and outbound (ABAP calls Java) calls in desktop and server applications.
    In this Sample Program we connect to SAP and call two BAPIs.
    Import statements: Any program using JCO should contain the following import statement:
    import com.sap.mw.jco.*;
    Otherwise, you have to fully qualify each class and interface which is very inconvenient.
    Connecting to SAP
    JCO.Client mConnection;
    A connection (or session) with SAP is handled by class JCO.Client
    try {
    mConnection =
    JCO.createClient("400", // SAP client
    "c3026902", // userid
    "********", // password
    "EN", // language
    "iwdf5020", // host name
    "00"); // system number
    mConnection.connect();
    catch (Exception ex) {
    ex.printStackTrace();
    System.exit(1);
    "A Client object is created via a call to createClient(). You can use a specific application server (as in the above code) or a server group (load balancing)." REFER the JCO Javadoc for the overloaded createClient() method for the latter possibility.
    "The Client class's connect () method tries to log on to SAP. If that fails for any reason, an exception is thrown. If the call succeeds, we can now stay connected for as long as we like. When we are done, we can call disconnect () to explicitly log off."
    Thankyou
    Regards.

  • A universe from SAP ECC 6.0 and SAP BW 7.3... Possible?

    Hello,
    We are looking to create one universe from two SAP data sources;
    1) SAP ECC 6.0 with EHP5 and
    2) SAP BW 7.3
    Can this be done?
    In UDT there is a SAP BW connection that can satisfy need for cubes but connection to ECC is a challenge.
    I think it's possible in in CR 2011 but exploring webi options.
    Any suggestion / work around ?.
    Thanks,

    Hi,
    With Feature Pack 03 (ramp up registration open now, and RU starts ~16 March), you will be able to use IDT driver to access ECC (R/3) data. and generate a universe.
    In the current, 4.0 SP02 Patch2.x codeline,  you cannot do the above.
    today, You can create a Multi Source-enabled Universe (UNX in IDT)  for relational BW-SQL access to underlying BW table schema  (by passing OLAP engine and all BEx semantic concepts.)
    But - if you have the XI 3.1 Data Federator product already -  then you can go from IDT, and use the DF XI3.1 as a datasource into a UNX universe.
    I have not tried combining BW-SQL and DF 3.1 connections into a MSU universe.
    Yes, using CR 2011, you can consume ECC.
    I'd recommend joining ramp up (go via your account team) and evaluating the new features asap.
    Regards,
    H

  • Compatibility between SAP ECC 6.0 and LDAP

    Hi,
    Does the current version of SAP ECC 6.0 has any dependency on the Domain and Forest Functional Level of Active Directory?
    Currently the Domain Functional Level is Windows 2000 native and the Forest Functional Level is Windows 2000.
    The Domain and Forest Functional Level will be raised to Windows Server 2003.
    While raising the Domain and Forest Functionality level to Windows 2003 provides additional features and capabilities as far as Active Directory enhancement it does not cause any issues with the application as such.
    It will be a good idea to confirm from SAP if there are any dependencies on this.
    Please do let me know if you need more information or any help from me.
    Thanks,
    Saurabh

    Hello,
    It is good to get on to the win 2003
    Read the SAP Note and refer the microsoft support link for further info:
    1377424 - Information on Active Directory domains and trusts
    http://support.microsoft.com/kb/310996
    Regards,
    Sai R.

Maybe you are looking for

  • I Can't Use My Subscription Minutes.

    I have not been able to use my minutes for months. and I was not even aware that I was being charged. I keep being told I was constantly told I have no credit. Today I have not been able to cancle my account or get credit

  • Why wont my Album Covers go into Itunes?

    I just moved over from Zune and I have to recopy all my music into Itunes. With Zune all my album art work is there, in Apple 1/2 of my stuff is just written and when I go out to ask for it there is nothing there? How do

  • Where can I buy iPod????

    Hi everybody, I want to buy a new iPod, but since I only have 10.3.9, I can't get the new iPods(except the shuffle but I'm not getting that 'cause I want a screen). So, I've opted for buying a 5.5 generation iPod video 30GB. The things I want to know

  • Transportable Tablespace in ASM

    Hi all, I want to move one tablespace from a database to another database using the 10g cross platform transportable tablespace. My source database is running on Linux 32 bit (Little endian format) and the target database is running on AIX (Big endia

  • Satellite L750 - network card on, Led ligth off

    Hello. Satellite L750 -> Laptop network card connects internet but led light off ? Thanks