SAP ECC 6.0 Software

Hi all,
I want to install ECC 6.0 but am a bit confused as to the software pack involved in doing so. I see there is an ERP 6.0 and SAP NetWeaver 7.0 (2004s) and was wondering if you could please let me know as to which instillation pack should be user for this instillation.
Please let me know?
Thanks and regards,
Iqbal

I HIGHLY suggest reading the installatino guides from http://service.sap.com/instguides. They have a Master guide which will tell you what DVDs you need for which scenario.
Markus

Similar Messages

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

Disaster Recovery For SAP ECC 6.0 On Oracle

Hi All,
This is our infrastructure
Windows 2003 Server
SAP ECC 6.0
Oracle 10
Legato Networker Client / Library
Actually our Backup Strategy is to do an Online Backup Every Night from monday to saturday. We want to test our backup by doing a Restore. We are assuming a complete loss of the system including hardware.
What we do:
1. Install the SAP System on a new host with the same hardware characteristic of the source system.
2. Install & Configure the legato utility.
3. Copy the E:\oracle\MIS\sapbackup\ directory from the source system to the test system.
4. Them we put the database in mount mode.
5. Execute the command: brrestore -b bdyxwoqv.fnf -m full (bdyxwoqv.fnf-> Full Online Backup that was executed without problems).
It gives the following errors:
BR0386E File 'F:\ORACLE\MIS\SAPDATA2\SR3_10\SR3.DATA10' reported as not found by
backup utility
BR0386E File 'F:\ORACLE\MIS\SAPDATA3\SR3700_9\SR3700.DATA9' reported as not foun
d by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0279E Return code from 'backint -u MIS -f restore -i E:\oracle\MIS\sapbackup\.
rdyybrzp.lst -t file -p E:\oracle\MIS\102\database\initMIS.utl': 2
BR0374E 0 of 63 files restored by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0231E Backup utility call failed
BR0406I End of file restore: rdyybrzp.rsb 2008-10-01 17.45.19
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0404I BRRESTORE terminated with errors
Since this is a new SAP system it never will find the SAPDATA files because they where on the source system and this is a new test system.
We found the following note:
96848 Disaster recovery for SAP R/3 on Oracle
But this note is for SAP R/3 no for SAP ECC!
It explain that you have to install your SAP system with the System Copy Method (is this the only way??).
2.) Installation of the R/3 System
The installation of SAP software contains the software installation of the database. The initial SAP database should be created again but the SAP data should not be loaded.
Install the SAP system with the Oracle-specific system copy method, which is based on backup/restore. This method is described in the system copy guide for your Product/Release. Refer to Note 659509 for products that are based on Web AS.
3.) Modification of the installation
Above all, you must take into account the mounted file systems at the time of the loss. If necessary create new SAPDATA directories (mount points). These generally identify a disk or a logical storage area (logical volume).
Are we working in the right way? maybe there is a formal procedure to do a Restore from an Online backup when you complete loss your system.
Please some tips.
Best Regards,
Erick Ilarraza

Hi Eric,
Thanks a lot for your reply, I will follow the Note 96848 Disaster recovery for SAP R/3 on ORACLE point 5.
5.) Restore profile and log files, as you sayed in case of disaster we will lost our "source" system.
On the other hand to configure the legato client we take care of the name of the server, we configured the .sap, .cfg and .utl files so in theory the restore will be done on the new test system since we run the brrestore command from that system.
Officially there is not a documentation from SAP to do a Restore from a Online Backup with SAP ECC, SAP Netweaver (ABAP / ABAP + Java). You only have the 96848 note??? I found the following information:
http://help.sap.com/saphelp_nw70/helpdata/en/65/cade3bd0c8545ee10000000a114084/frameset.htm
But there is not a official procedure like a System Copy Guide or Installation Guide.
Best Regards,
Erick Ilarraza

SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
Jun

Hi Jun,
You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
Regards,
Srikishan

SAP ECC 6.0 SR3 Cluster failover not working in windows with DB2 UDB V9.1 F

Dear Expertise,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP5 in windows cluster environment.
We have installation following instances on nodes 1 and 2.
Node 1
DB2 database software
Central service instance for ABAP Installation on Shared drive G:
First MCSC node to create a cluster group u201Cpdssapgrpu201D
Database group u201Cpgsdbgrpu201D(Shared Drive)
Enqueue replication service
CI (central instance)(local Drive)
Node 2
DB2 database software
Additional cluster node
Enqueue replication service
DI(dialog instance)(local Drive)
I can login into the system using both CI and DI.
if my SAP Cluster group is moved from one node to another i can still login into the system
But when my DB2 group is moved from node A to node B my SAP services are getting closed
and i am getting the message database not found
so please Guide me as soon as possible Friends.
Thanks and Regards,
Ravindra
Edited by: Ravindra Bade on Mar 6, 2009 10:22 AM

Hi Ravidra
Have u solved the probelm I also have the same problem when i move the groups from node1 to node2 manually my 2 servrces 00 and 01 are failed not able to bring up again. If You solve the problem please guide me the solution to solve this.
THanks in advance

Problem with Sproxy transaction in SAP ECC 6.0

Hi,
I executed SPROXY transaction in SAP ECC 6.0 system, some objects of XI/PI repository are listed, some are not listed.
Why?
How can i achieve to be listed all XI/PI objects?
Thanks.

Objects are listed belonging to the Software component ECC 6.0 only as you are viewing from ECC server ( makes sense?)
This link exist in SLD where Product and software components are listed.
Now if you have created a third party software component ABC and wants the objects from here also to be listed in ECC then you can go to ECC in SLD and make the Software component ECC 6.0 dependent on ABC.
regards

Need to install SAP ECC 6.0 & NW-04s Components

Hi Experts,
I am new to SAP.
I have to install SAP ECC 6.0 ,NW-04s(PI,BI,MI,.......) , so I need to know whether SAP Software will support the below illustrated Hardware or not.
1. Intel Processor Core-2-Duo 6650 2.66 Ghz
2. Mother Board Intel DG33FBC.
3.RAM 4 GB.
I appreciate your answers,and also points will be rewarded.
regards
Ken George

Hi Ken,
From my experience, I did tried to install ECC6 on a server with RAM 2GB but without Java stack. As for NW04s, if you want to install one nw04s technology it is sufficient for the current hardware specification. If you want to install all those software because of you want to learn, could you advice me which path that you want to go?
Thanks and Regards

Reach 2.0 does not match preriquisite in SAINT on SAP ECC 6.0 EHP5

hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
Jun

Hello Lee
may be OSS Note 1386600 might help. No further idea so far.
With best regards
C.B.

QCI Implementation in SAP ECC 6.0 having IS OIL

Hi All,
I have a problem implementing QCI in my SAP ECC 6.0 having IS OIL. The SAP note 619060 details how this can be done.
The note provides the C source programs which can be compiled to build executables qci_srv executable, which will be used to register the QCI_SERVER RFC. This executable is required to be placed into the SAP kernel.
The C source programs also helps us create the astm.exe and agasap.exe executables.
May be the guidelines are pretty much clear, where i dont have a understanding is-
how to compile these programs,
what compiler to use,
do i need to have a programming background,
do i need to have the SAP RFC SDK kit?
I need answers on these, please help me with this, also any guidence is welocme.

Dear Rahul,
The astm.exe and qci server methods of calculation are limited to one standard which is planned to be changed this year (2008). The implementation of the rfc server solution is also critically dependent upon many hard and software factors, a change in any one of these can result in the necessity of a re-implementation. I would recommend that the company wishing to implement the qci server take a look at our offerings [www.quantityware.com] as we are currently the only SAP-Certified integration offering for complex gas, petroleum, chemicals calculations with IS-Oil&Gas.
We offer speed, security, accuracy and multiple standards coverage all rounded off with good support.
Best Regards,
John.

Sql Server configuration requirements for SAP ECC 6.0

Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts.

"Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM

SAP ECC 6.0 on Linux OS

Hello to all,
I'm new to SAP world and would like to install SAP ECC 6.0 SR1 or SR2 on linux platform with Oracle as Database. I'm not sure how to search for software into the market place, what are the notes to refer. Would be great help if someone can pass me some info to start with. Thanks to everyone
Regards

Hi
Proceed as below
www.service.sap.com/swdc
-->Downloads
-->Installations and Upgrades
-->My Companys Application Components
-->SAP ERP
-->SAP ERP 6.0
-->IDES-Version
>LINUX>oracle
Add the below software to download basket
ORACLE Software
EXE 51031676_1 DVD ORACLE RDBMS 10.2 LINUX_X86_64 1 of 4
RAR 51031676_2 DVD ORACLE RDBMS 10.2 LINUX_X86_64 2 of 4
RAR 51031676_3 DVD ORACLE RDBMS 10.2 LINUX_X86_64 3 of 4
RAR 51031676_4 DVD ORACLE RDBMS 10.2 LINUX_X86_64 4 of 4
ORACLE CLIENT
ZIP 51033272 ORACLE 10.2 Client
KERNEL
ZIP 51033508_9 NW 7.0 SR3 UC-Kernel 7.00 Linux on x86_64 64bit
JAVA DUMP
ZIP 51033525 SAP ERP 6.0 SR3 Components
ZIP 51033526 BS 2005 SR3 Java Components
EXPORTS:
EXE 51034985_1 IDES SAP ERP 6.0 SR3 Inst. Export 1 of 23 Info 976563 30.09.2008
RAR 51034985_10 IDES SAP ERP 6.0 SR3 Inst. Export 10 of 23 Info 976563 30.09.2008
RAR 51034985_11 IDES SAP ERP 6.0 SR3 Inst. Export 11 of 23 Info 976563 30.09.2008
RAR 51034985_12 IDES SAP ERP 6.0 SR3 Inst. Export 12 of 23 Info 976563 30.09.2008
RAR 51034985_13 IDES SAP ERP 6.0 SR3 Inst. Export 13 of 23 Info 976563 30.09.2008
RAR 51034985_14 IDES SAP ERP 6.0 SR3 Inst. Export 14 of 23 Info 976563 30.09.2008
RAR 51034985_15 IDES SAP ERP 6.0 SR3 Inst. Export 15 of 23 Info 976563 30.09.2008
RAR 51034985_16 IDES SAP ERP 6.0 SR3 Inst. Export 16 of 23 Info 976563 30.09.2008
RAR 51034985_17 IDES SAP ERP 6.0 SR3 Inst. Export 17 of 23 Info 976563 30.09.2008
RAR 51034985_18 IDES SAP ERP 6.0 SR3 Inst. Export 18 of 23 Info 976563 30.09.2008
RAR 51034985_19 IDES SAP ERP 6.0 SR3 Inst. Export 19 of 23 Info 976563 30.09.2008
RAR 51034985_2 IDES SAP ERP 6.0 SR3 Inst. Export 2 of 23 Info 976563 30.09.2008
RAR 51034985_20 IDES SAP ERP 6.0 SR3 Inst. Export 20 of 23 Info 976563 30.09.2008
RAR 51034985_21 IDES SAP ERP 6.0 SR3 Inst. Export 21 of 23 Info 976563 30.09.2008
RAR 51034985_22 IDES SAP ERP 6.0 SR3 Inst. Export 22 of 23 Info 976563 30.09.2008
RAR 51034985_23 IDES SAP ERP 6.0 SR3 Inst. Export 23 of 23 Info 802583 30.09.2008
RAR 51034985_3 IDES SAP ERP 6.0 SR3 Inst. Export 3 of 23 Info 976563 30.09.2008
RAR 51034985_4 IDES SAP ERP 6.0 SR3 Inst. Export 4 of 23 Info 976563 30.09.2008
RAR 51034985_5 IDES SAP ERP 6.0 SR3 Inst. Export 5 of 23 Info 976563 30.09.2008
RAR 51034985_6 IDES SAP ERP 6.0 SR3 Inst. Export 6 of 23 Info 976563 30.09.2008
RAR 51034985_7 IDES SAP ERP 6.0 SR3 Inst. Export 7 of 23 Info 976563 30.09.2008
RAR 51034985_8 IDES SAP ERP 6.0 SR3 Inst. Export 8 of 23 Info 976563 30.09.2008
RAR 51034985_9 IDES SAP ERP 6.0 SR3 Inst. Export 9 of 23
ZIP 51034992_13 ERP 6.0 SR3 IDES Inst. Master Windows Server on x64 64 bit
Add all the software to download basket and start downloading it before that you need to check the installation guide
Regards
Uday

How to Ganerate ETDS file FVU formate form SAP ECC 6

Dear Friends,
In India NSDL requirment for ETDS submitting the file type is the FVU. As per NSDL requirment it is possible to ganerate the file form SAP ECC 6 Verson, If it is possible please provide the soluation.
Regards,
Mahesh

Dear Mahesh
You can use SAP provided t-code J1INEFILE, if require get change the program with the help of ABAPER. The format
can be modified or do one thing download the file in excel and there are software available in the market to change
the format acceptable to Income tax.
Shashi Somani

CA Autosys Setup for SAP ECC 6.0

Hi all,
Apparently, we are upgrading our SAP version to SAP ECC 6.0, where we will need to establish a connection between Unix system and SAP application system (ECC 6.0).
In order to bridge between Unix and SAP ECC 6.0, we have installed CA Autosys adapter for SAP (Unix version) in the Unix server, as of job schedular purpose. Meanwhile, the following are the softwares that we are using to test the connection as well:
a) SSH Tectia Client
b) Reflection X version 14.0 + Service Pack 6 (Evaluation version)
We have installed both three apps (Autosys, SSH Tectia Client, and Reflection X), however, we experienced the following difficulties when test the Autosys and SAP ECC6 integration:
i) performance issue when we establish a connection between Unix and SAP ECC 6.0 (do we need to re-config in SAP system? if yes, pls can you guide me where I can tune the system?).
ii) Error message when running command 'sapjob':
   $ sapjob
   %CASAP_E_998 Required SAP shared library <librfccm> not found in library path.
   ld.so.1: sapjob: fatal: relocation error: file /opt/CA/CAlib/libpig.so: symbol caenf_cmd: referenced symbol not found
   Killed
Do you guys have any suggestion on what is happening on the above?
Thanks in advance.
Best regards,
Patrick

> Can the systems resolve their names back and forward?
>
> Please can you show me how I can perform this, in order to resolve their names back and forward? Is there any possible rootcause on performance issue?
This depends on the setup of the system. Both systems must be able to find their names by executing
nslookup <ip-addresse>
or
host <ip-addresse>
If that is not the case, the connection initialization will wait until the DNS is timing out.
> Did you install the (SAP-) librfc into that directory?
>
> I will try this out and shall let you know
Ok!
Markus

SAP ECC 6.0 on Fedora

Hi,
Please let me know, can i install sap ecc 6.0 on fedora 10.0 or 11.0.

If fedora is supported, installation procedure is almost same like on redhat or Suse except some OS specific command differences, which you will obviously get to know after reading the Guides specific to installation of fedora and the SAP Notes specific to fedora or any other flavor of Linux environment.
Check the Notes and supported Linux platforms on sdn and on product availability matrix
SAP Note 171356 - SAP software on Linux: Essential information
SAP on Linux
Edit: ok, Hannes has already specified the supportability now, it is clear that you might want to use supported flavour
Edited by: Anjali Sharma2 on Sep 21, 2009 3:55 PM
Edited by: Anjali Sharma2 on Sep 21, 2009 3:57 PM

SAP ECC 6.0 & BW/BI 7.0 Disk Image

Hi Experts,
I want to practice BI7.0, so I found this SAP ECC 6.0 & BW/BI 7.0 Disk Image
software available on ebay. Has anybody tried out and how does it work. Is it really good the IDES System to work on BI 7.0.
Please advise I am planning to buy it.
Thanks,
Prashant.

Hi,
Thanks for your suggestion, I tried so much to get the IDes system on service.market.place but the website doesnt navigates to this link as all.
The list of software components which are found are only these:\
ARIS for SAP NetWeaver
Job Scheduler (Full Version)
PLM Catia V4
PLM Integration Autocad
PLM Integ. Catia V5
PLM Integration I-DEAS
PLM Integration Inventor
PLM Integ. Pro/E 3.2
PLM Integ. Solid Edge
PLM Integ. Solidworks
PLM Integ. Unigraphics
SAP Best Practices
SAP Core CEE
SAP CProject Suite
SAP CRM
SAP Cryptographic Software
SAP Easy Document Management
SAP ERP
SAP GUI for Windows
SAP HR-CEE
SAP NetWeaver
SAP NetWeaver Rapid Installer
SAP PI
SAP R/3 Enterprise
SAP SCM
SAP SRM
Under this which has BI7.0 is it SAP Netweaver or SAP NetWeaver Rapid Installer
And also when I looked into it there are so many files. But I need the the files to install only BI 7.0. Please help me on this.
Thanks,
Prashant.

SAP ECC 6.0 Software

Similar Messages

Maybe you are looking for