SAP ECC 6.0 Update to EHP3: Wrong tp buffer format
Dear Experts,
in order to update SAP ECC 6.0 to EHP3, i'm facing a problem at the IMPORT_PROPER Phase of the Update. Here is the message error:
The import checks of your system showed that you still use the old tp buffer format in your Transport Management System. Since the current queue contains packages with a name longer than 10 characters, tp needs a buffer with the new format to import the queue correctly.
Set the parameter NBUFFORM = 1 in the transport tool configuration in the Transport Management System (Transaction STMS) (See also the documentation of STMS). Then continue the import of the queue.
I have checked in the TP_DOMAIN_ECC.PFL file in D:\usr\sap\trans\bin path and it is per default as show below:
TRANSDIR =
sap-ecc\sapmnt\trans
ECC/DBHOST = SAP-ECC
ECC/DBNAME = ECC
ECC/DBTYPE = mss
ECC/NBUFFORM = 1
ECC/TP_VERSION = 266
My question is: How to perform NBUFFORM = 1 with the STMS T-Code?
Any ideas are welcomed.
Thank you very much in advance.
Regards,
Pascal.
Edited by: Pascal TRAN on Jan 22, 2009 11:44 AM
Edited by: Pascal TRAN on Jan 22, 2009 11:44 AM
> My question is: How to perform NBUFFORM = 1 with the STMS T-Code?
- logon to client 000 on your TMS domain controller system
- start STMS
- "Overview" - "Systems"
- doubleclick on the domain controller system
- press on "change"
- select tab "transport tool"
- check the parameters and save
- then go back and select in the systems overview "SAP System" - "Update configuration"
Markus
Similar Messages
-
Error on SAP ECC 6.0 Update to EHP2
Hi Guru's,
I encountered below errors while to update SAP ECC 6.0 to EHP2 :
Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPK-602DWINSAPAPPL, tp step R,
return code 0012
Dump message : st22 :
Error in the ABAP Application program
The current ABAP program "CL_FDT_FACTORY=====================CP" had to terminated because it has come accross a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_FDT_FUNCTION===========CP" in include
"CL_FDT_FUNCTION===========CM017" in line 57.
"The method "IS_GENERATING" does not have RETURNING parameter."
Kindly help on this. Thanks in advance.
GunaHi Guna,
maybe note [1083886|https://service.sap.com/sap/support/notes/1083886]?
One comment: For EHP2, please mind note [1052522|https://service.sap.com/sap/support/notes/1052522] and use an equivalent support package stack to your ECC 6.0 installation. EHP2/SPS02 as a minimum, higher even better.
Best regards,
Christoph
Edited by: Christoph Vehns on Feb 2, 2009 8:45 AM
Edited by: Christoph Vehns on Feb 2, 2009 8:45 AM -
SAP ECC 6.0 IDES KERNEL Update
Dear experts,
i have installed a SAP ECC 6.0 IDES on a Windows Server 2003 Enterprise 64 bits + MS SQL from the MarketPlace:
-> http://service.sap.com/swdc
-> Download
-> Installations and Upgrades
-> My Company's Application Components
-> SAP ERP
-> SAP ERP 6.0
-> IDES-Version
-> Windows Server
-> Microsoft SQL-Server
and in order to update my solution into EHP3, i need to update the Kernel witch is in 7.00 version.
How and Where could i get the kernel update file?
Is there any difference between SAP Netweaver and SAP ERP Installation?
Thank you very much for your great help.
Best regards,
Pascal.
PS: i already update the SPAM/SAINT version (number 33) and have a well configured MOPZ for confirmed files.Hello Pascal,
The kernel is at a differnt location. Please go to:
1. http://service.sap.com/swdc
2. Download
3. Support Packages and Patches
4. Entry by Application Group
5. Additional Components
6. SAP Kernel
Select the corresponding platform.
You should download 2 kernel files: SAPEXE and SAPEXEDB. One is database independent, one is DB dependent. Unpack them to the kernel directory and the kernel then is upgraded.
Best Regards,
Joseph -
Upgrade of Sourcesystem SAP EHP3 SAP ECC 6.0 to SAP EHP4 SAP ECC 6.0
Hi,
I noticed there is a lot of questions on the testing procedures for BI side when Upgrading the source system from R/3 to ECC 6.0. But noticed there aren't many posts on when doing Ehancement Packs. But I believe the process would be more or less the same?
My project is doing an Upgrade of SAP EHP3 SAP ECC 6.0 Stack03 to SAP EHP4 SAP ECC 6.0 Stack07. BI Side is also upgraded, but I am more interested in the impact of the Upgrade's Source System (ECC) on BI.
I believe the amount of impact is less as compared to an upgrade from R/3 to ECC, but there still should be impact to BI somehow.
Basically, from what I have researched, there correct procedure is as below:
Pre-Upgrade
1 - Lock users in ECC
2 - ensure that the Delta queue is cleared in RSA7
3 - check the PI in ECC6.0 ( What is PI???)
3 - stop all loads from BW
Post-upgrade
1 - Check Source System connections
2 - replicate all data sources in ECC (when I do a check connection in RSA1 I get the message "No metadata upload since upgrade" which I believe is due to this step not done yet? Is it ok to replicate all datasources??)
3 - activate all rules thru program (RS_TRANSTRU_ACTIVATE_ALL. Is it ok to activate all transfer strucs?)
4 - run Init w/o Data Transfer for deltas
5- run and then check extraction for full & delta loads
Appreciate if I could your expert inputs on the procedures above? Maybe a more detailed step by step procedure or comments are most welcomed.
Thanks.Additional information:
I start the upgrade from SAP ECC 6.0 with a dual stack.
SAP advised me to download the following file to start the upgrade
SAPehpi_68-10005800.SAR from the SMP
Download path: Browse our Download Catalog--> Additional Components --> Upgrade tools --> SAP EHPI Installer --> SAP EHP Installer 7.00.
Start the upgrade without the jce_policy_zip extension. This was written in note 1302772 .
Have more luck with it. -
Trigger when generating/updating a PP resource(work center) in SAP ECC 6.0
Hello, SDN members.
The thing is: I want to mapp when a resource (transaction CRC1 ou CR01) is generated to trigger an interface other Non-SAP System.
I am used to use EXITs or BaDIs to mapp changes when it is about process orders, MRP, etc.
I have been looking around in SAP ECC 6.0 without success.
Does anyone could give me a clue of how can I mapp that? It applies also to updating a Resource (transaction CRC2 or CR02).My question is that why step 4) doesn't work normally ?
-
Update Process Order Confirmations Back to SAP ECC
Hi,
Is there a document or step by step guide which explains how i can update SAP EARP with process order confirmations from my shopfloor? Below is the scenario i am looking for help in
1. There is a SQL server table where the SHOP floor update the quantity manufactured against a Process order.
2. I need to pick up that data from the SQL server table and update the ERP against that Process order.
Can any one explain how this can be achieved.
I checked the sample's and the templates in SDN but none of them actually show how to update any ERP?
Please advice!!.
Regards
SurajCheck this one
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60ac6bb8-a684-2b10-208d-b90883004a5e
https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/204a13d0-399d-2b10-ec84-9c254cd7efd4
You use this component to enable the shop floor operators to record their production order and process order confirmations using a touch screen user interface. In SAP ERP Central Component (SAP ECC) operators must complete many steps to confirm orders. Instead, you can use this interface, on a touch screen to enter the production performance easily and effectively. You can also use this component to obtain operators' work lists and information on their current activities.
Regards
Ram Upadhyay -
SAP 4.0 Integration to update SAP ECC 5.0 HR information
Hi, my project currently requires an existing HR module in SAP 4.0 to integrate and update HR information to a non HR system which is SAP ECC 5.0.
This HR information in SAP ECC 5.0 will then be used for DBM Clock in Clock out integration with HR . There is an existing tcode to run replication of HR which is 'PFAL'. I found that in SAP 4.0 and SAP ECC 5.0 there is a difference in the selection screen. I just wanted to know is it possible to use it to integrate between the 2 systems of different versions?.Hi,
Please check the note 147519 which mentions the limitation and maintenance strategy. According to the note SAPGui 6.20 is "upward compatible" with ECC 5.0 and ECC 6.0 and SAPGui 6.20 supported until 31/12/2010.
However, always recommended to use the latest patch and this is currently at 69.
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx. -
Update SAP ECC 6.02 from poratal
Hi everyone,
We now build a portal for module PP. We need to update SAP ECC 6.02 from the portal. Today we use SAP transactions. In the past we added a couple of User Exists to these transactions.
While using the portal all the validity checks that were added to the User Exit don't take place.
What is the best way to perform an update from the portal to SAP?Hello Ester,
I am assuming that you will be building dynpro applications and host them on a portal. You could either embed the logic of the exists in the RFC which you will be using from the portal and and if something fails return back the error message to the end user or else if its simple to embed some logic in dynpro which will do the job.
Thanks,
GLM -
Update license at first time when installed SAP ECC 5
Hi Expert
How to update license at first time when installed SAP ECC 5 Unicode System, license expiration period only one month.
Regds.
RahulHello,
SAPKIPYJ63 is PI_BASIS 2005_1_640: patch 0003.
Apparently you have included this support package in the upgrade. But have you installed or upgrade the component PI_BASIS to 2005_1_640 during the IS_SELECT phase? This is required for support package SAPKIPYJ63.
Regards,
Joe -
Data load from SAP ECC to SAP BI
Hello Gurus and Experts
I am new to BI and I m almost struggling to find a step by step process in loading data from SAP ECC to SAP BI through generic extractors from VBAK. The Problem is I can create an Infopackage for full update and loaded the records.(Lets say Upto this step 100 records are moved to PSA)
Then I create a sale order in ECC which is a new record that has to be transfered as delta record.
Now my questions are:
Am I correct if I moved the initial records into PSA with Full Mode InfoPackage?
Should I create another infopackage for delta records with Delta Mode or to change the update mode of the infopackage created earlier for Full Update mode?
Should I create a new infopackage every time to load the delta records?
Does separate DTP has to be created for Full and Delta updates?
Please dont be frustrated if my questions are pointless or childish
I would be glad if someone demonstrate the solutions in steps
Thanks in Advance
KarthikHi Ram,
I have followed all the steps mentioned by you, yet something is lagging in my end.
Let me lists the steps done by me and please correct me if i am wrong anywhere.
1. RSO2 in ECC..
2. Created DS with short, med and long names in SD application component for VBAK with all the fields unchecked in hide selection except document number, time of document, document date, net
value of the document and document currency.
3. mentioned a numeric pointer as Document number for delta and used new status for changed records.
3. saved the datasource. checked the newly created ds using the tcode RSA3.
4. Replicated the datasource under SD Application Component in BI and Activated it
6. Performed Transformations
7. created an Info Package with FULL UPDATE and executed. I got 6898 records in my PSA
6. Created DTP with DELTA. Saved and Executed it. Got 6898 records in my DSO
7. Created Info Package with INIT WITHOUT DATA TRANSFER and scheduled it.
8. Switched over to ECC and added a sale order
9. Created an InfoPackage with DELTA UPDATE and Scheduled it.
-----I didnt receive any records in my PSA
10. performed DTP.
---- I didnt received any new records in my DSO as my delta run is not working..
PS: I am using WO DSO
Please correct me if i am wrong anywhere
Thanks in advance
Karthik -
SAP ECC 6.0 extractor 0FI_GL_4 -extracting GL data in delta mode into MSSQL
Hi,
Currently we are having the following need. We have to build delta interface from SAP ECC into MSSQL for G/L data. If possible, we would like to use for this standard ECC extractor: 0FI_GL_4. As far as I know this extractor is dedicated for SAP BW, but can we apply it for MSSQL? Does anyone has any experience with similar task? Any help will be appreciated.
Regards,
MarekHi,
I'm using the data source 0SEM_BCS_10.
I have created my staging cube similar to my Totals cube (0BCS_C11).
I'm stuck in creating update rules for this staging cube, particularly with respect to the follwing feilds:
1) Posting level
Pls let me know how to update this.
Also, help me understand in general, how to write update rules to feilds which exist only in BCS.
2) F Yr of the first acquisition posted
3) Period in which first acq was posted
(Mapping for these will be constant values (actual dates) - correct me if wrong)
4) Mov Type
I guess we need to just map this with the transaction type in ECC.
Many Thanks,
Kumar -
Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
KarteekWe are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC BI BO Analysis office
1 -------------> 1 ----------> 1 ------
|
| (Now Data is changed in Analysis office from 1 to 2)
|
(?) <-------------- 2 <---------- 2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek -
Error while Importing Integration kit Transport Requets into SAP ECC 5.0
HI ,
1. AT BO side -> I can see the many roles, but under 'role import tab' in CMC when i add any 'role' and click on update button,
system showing an error as below .
"Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC
5.0 When i imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
contain similar error. Now when i try to login into sap its going dump.Is there any possibility of reverting back the transport
requests.
Pls help me to fix these issues.
Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AMHi ingo,
Now i can able to transport successfully after following the order.
Thank you very much
Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
Earlier i have imported non unicode request numbers into sap unicode system.
tats why i got error.
Now i have imported unicode request number to unicode sap system with sequence.
Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM -
Marking Fields as display only in SAP ECC
Hello Experts,
We have centralization scenario for Vendor master data. We have a requirement that once the Vendor Master data is created in SAP MDM and syndicated to SAP ECC, the ECC users should not be able to change the data for the fields coming from SAP MDM, i.e they should not be able to make change to the field values in Vendor Master data coming from SAP MDM, through XK01 and XK02. But at the same time these MDM fields should get updated if it is updated by an IDoc.
Do we have any exits for Vendor in SAP ECC which can be called during XK01/XK02 which will make the SAP MDM fields non editable from the XK01/XK02 screen.
Please help.
Best Regards
ManojHi Manoj,
In the ECC go to the SPRO transacción and find:
- Financial Accounting / Accounts Receivable and Accounts Payable / Vendor Accounts / Master Data / Preparations for Creating Vendor Master Data / Define Account Groups with Screen Layout (Vendors)
You need to change the customizing by each Account Group and put the fields that came from MDM in "Display" mode
Regards
Daniel -
Transfer of data from SAP ECC 6.0 to E-Recruitment
Hi,
We are implementing E-recruitment . SAP ECC and E-Recruitment are running in different servers.How to transfer data from following Infotypes from SAP ECC 6.0 to E-Recruitment .
IT0002 Personal Data to 5102 Candidate Information
IT0006 Address Data to 5110 Address Rule
IT0105 Communication Data to 5110 Address Rule
IT0022 - Education to 5104 - Education
IT0023 Others/Previous Employers to 5103 - Work Experience
IT0024 - Qualifications to 5105 - Qualifications
Regards,
Somi .Hello,
in general IT5103, 5104 and 5105 are not part of the standard distribution model. Without special customer own ALE development you will not be able to transfer these information.
Check SLG1 - application log for entries.
did you the initial data upload or did you only transfer changes?
If you did the initial data transfer be sure the user running the IDOC import has the correct rights. Be sure noone changed the usage of IT0000 STAT2 as e-recruiting expects value 3 for active employees. Furthermore be sure to be informed about the handling of hirings in future.
If you only wanted to transfer updates. PFAL is not the right way. Be sure you activated the change pointers correctly. Use RBDMIDOC. And be sure to implemet the latest Notes. There had been an error that changes were only processed in e-recruiting if at least IT0000, 0001 and 0002 were changed which resulted in problems when only IT 0006 was updated. In this case the update was not transfered to e-recruiting.
Best regards
Roman Weise
Maybe you are looking for
-
My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black). Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks. I have all my old contacts saved o
-
I recently updated my ipad and then I connected with my computer for sync, not realising that I had a new version of itunes with none of my apps. Now I have lost all of the apps and books etc, that I had prurchased. How do I get them back?
-
iBook doesn't response my tapping anymore.
-
Retriving data through stored procedure returning Table of object type
I am trying to retrieve the data returned as a table(secret_tab_type) of object type(secret_type). Now we can get the secret_tab_type table through rset = (ResultSet) cstmt.getObject(1); but how to map the SQL object type to Java object type ?? FUNCT
-
IOS AIR apps do they need AIR installed on device?
Hello, I am developing an app for iOS using AIR for iOS in flash cs5.5. I know for android you have to download air on the deivce first to run the apps. I don't have an iphone or ipad to test my app on yet, but am wondering if a user who is downloadi