SAP ECC 6.0 with Classic GL
Hi all, after doing an upgrade from 4.6C to ECC 6.0 is it possible to continue using classic GL no activating new GL?. Is it necessary any data conversion in GL ?.
Thanks
Regards
Hernan
Hi,
New GL has lots of functionality unlike Classic one.
Activation of new GL during upgrate will be a big project considering complexity involved during migration and introduction of new functionality. It'll be as good as implementation.
As long as it's just a technical upgrade, you don't have to worry about much for new GL for the time being. Ofcourse, you'll have to migrate to a new GL at some point of time.
Thanks,
Nirav
Similar Messages
-
SAP ECC 6.0 with DB2 on winds 2008r2 using VMware
Dear All,
Request you to guide me in giving some information related to
-compatibility
-best practice
-official guidelines for SAP installation.
We have purchased SAP ECC 6.0 with DB2 as RDBMS.
Thanks in advance.
by
Harika NI got information
Note 1130801 - DB2 LUW, DB2 z/OS release for VMware, XEN, and Hyper-V
The usage of DB2 Version 9.1 for LUW, DB2 Version 9.5 for LUW, and DB2 9.7 for LUW on Windows and Linux (SUSE and RedHat) with VMWare, KVM, and XEN is permitted and supported by SAP and IBM.
Kind regards,
Harika N -
Integrating SAP ECC 6.0 with Microsoft Windows 2003 Active Directory
Hi Gurus,
We are planning to integrate our SAP ECC 6.0 with Microsoft Windows 2003 Active directory.
I have several questions on this:
1. Can i authenticate all the users from SAP
2. It is used only for user authentication or can it be also used for password authentication
ie user can login using his windows password?
3. While integration in SAP does a separate table or a field is created in database.
4.If a employee leaves a company than in SAP is it possible to lock & deactivate the user automatically.
Thanks in advance.
Regards,
NiharHi Mastek,
You should be able to accomodate your needs with respect to integration of your AD accounts with SAP ECC ABAP. This can be done via LDAP connector configuration. The below has info on how to perfrom the configuration at a high level. You will have to integrate, and map certain user data. You may also want to do some LDAP Connector research:
[http://help.sap.com/saphelp_nw70/helpdata/en/10/1a063a15c611d4b61f0000e835363f/content.htm]
On the Java stack - you can also confugure UME to integrate/authenticate with AD:
[http://help.sap.com/saphelp_nw70ehp2/helpdata/en/12/7678123c96814bada2c8632d825443/content.htm]
Hope this helps! -
Upgrade from SAP R/3 4.7 to SAP ECC 6.0 with PSCD and TFA
Hello!
I have to upgrade an SAP R/3 4.7 to SAP ECC 6.0.
We have SAP FI/CO, PSM, IM, FI-AA, PS, with PSCD (FI-CA) as well the special taxes component TFA.
Is there some special procedures for the the Upgrade with this components (PSCD and TFA)?
Is there some documentation for the special Uograde procedure as well the normal procedure?
We use Windows with Oracle.
Can some onePSCD is in ERP a Business function set - see 957295 - PSCD: Renaming PUBLIC_SERVICES business function set, the upgrade should automatically take care that activation.
Is TFA the tax extension for Ireland? If yes, then the same should be true here.
Markus -
Integration of SAP ECC 6.0 with SAP Environmental Compliance 3.0
Hi Friends,
We have SAP ECC 6.0 running on Sun Solaris with Oracle as the DB. Now we are in the process of installing SAP Environmental Compliance Version 3.0 which is running in Windows 2008 Server and with SQL Server 2008 as its database.
I'm looking for an answer on how to integrate the SAP ECC 6.0 to SAP EC(Environmental Compliance) system.
Kindly provide your valuable inputs.Looking forward to hear from you soon.
Thanks and Regards,
VimalHello Vimal
regarding this software a number of publications are available:
http://help.sap.com/saphelp_ec30/EC300_FuncDocu_EN.pdf
Here you will find the list of rerequisites etc. and the integration e.g. into SAP EHS Management is explained.
In any case. The SAP marketplace is the right place to take a look regarding prerequisites and how to integrate this software with SAP core (SAP ECC 6.0) or with SAP EHS Management software.
As SAP EHS Management is technically part of ECC 6.0 the link to SAP Enviromental Compliance should be possible.
With best regards
C.B. -
Upgrade SAP ECC 6.0 with SPS 12 to EHP4
Hi!
I would like to update a SAP ECC 6.0 system with EHP4.
I am on Windows 64 Bit with Oracle.
My current SP stack of SAP ECC 6.0 is 12.
The questions are:
Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
Any helpful information will be very appreciated!
Thank you!Hi
You can check the below notes
Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Regards
Uday -
Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL
Hi Experts,
Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
Best Regards,
Erik EspinosaNote clearly states
This note is only relevant if the following Support Package is installed in the system:
NW04s: Support Package SAPKB70008
Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
Regards
Juan -
Smartform Printing Problem in SAP ECC 6.0 with Ehp6
Hi Sap Expert,
Our Sap System has been upgraded from ECC 6.0 to ECC 6.6 ( Ehp6). now we are facing problem in to print smart forms .
I have a smart form with one page and three copies are there.
On first it was written ORIGINAL, on second DUPLICATE and third one is TRIPLICATE.
When I see the print preview it shows all the three pages ( ORIGINAL, DUPLICATE and TRIPLICATE. ). but when i give the command to print. it will only 3 copies
ORIGINAL. and when i convert into PDF it shows only one page ORIGINAL.
I want ORIGINAL, DUPLICATE and TRIPLICATE printout in single command.
Note : Before Up gradation of sap system it worked fine.
Guide me.........Hi Marques,
Yes, my problem has solved,
Write the code Driver Program:
Declare Internal Table as:
DATA : BEGIN OF ITAB OCCURS 0,
I TYPE I,
TEXT TYPE CHAR20,
END OF ITAB.
and Append 3 time this Itab with the no of copies of form ( Original, Duplicate and Triplicate ) as
ITAB-I = 1.
ITAB-TEXT = 'Original'.
APPEND ITAB.
CLEAR ITAB.
Now,
LOOP AT ITAB.
call function module of smartforms as
CALL FUNCTION fm_name
EXPORTING
CONTROL_PARAMETERS = CO
OUTPUT_OPTIONS = OT
* USER_SETTINGS = 'X'
L_*** = L_***
V_INDX = ITAB-I
* IMPORTING
TABLES
IT = IT
and modify the smart form as
write the code in window
IF V_INDX = '1'.
v_text = 'Original'.
ELSEIF V_INDX = '2'.
v_text = 'Duplicate'.
ELSEIF V_INDX = '3'.
v_text = 'Triplicate'.
ENDIF. -
Does /sapmnt need in cluster file system(SAP ECC 6.0 with oracle RAC)
We are going to be installing SAP with Oracle 10.2.0.4 RAC on Linux SuSE 10 and OCFS2. The Oracle RAC documentation states:
You must store the following components in the cluster file system when you use RAC
in the SAP environment:
- Oracle Clusterware (CRS) Home
- Oracle RDBMS Home
- SAP Home (also /sapmnt)
- Voting Disks
- OCR
- Database
What I want to ask is if I really need put SAP Home(also /sapmnt) on cluster file system? I will build a two nodes oracel 10g RAC and I also have another two nodes to install SAP CI and DI. My orginial think is sapmnt is a NFS share, and mount to all four nodes(RAC node and CI/DI), and all oracle stuff was on OCFS2(only two rac nodes are OCFS), anybody can tell me if SAP Home(also /sapmnt) can be NFS mount not OCFS2, thanks.
Best regards,
PeterHi Peter,
I don't think you need to keep /sapmnt in ocfs2 . Reason any file system need to be in cluster is,in RAC environment, data stored in the cache of one Oracle instance to be accessed by any other instance by transferring it across the private network and preserves data integrity and cache coherency by transmitting locking and other synchronization information across cluster nodes.
AS this applies to redo files, datafiles and control files only , you should be fine with nfs mount of /sapmnt sharing across and not having ocfs2.
-SV -
File system for SAP Ecc 6.0 with db2 on AIX
Hello Everyone
Pleaese suggest the file system size which is to created before installation of sap ecc6.0 sr3 on Aix with DB2.
Thanksfind this
PRD
df -M
Filesystem Mounted on 512-blocks Free %Used Iused %Iused
/dev/hd4 / 4194304 2008384 53% 2438 2%
/dev/hd2 /usr 33554432 24364192 28% 48662 2%
/dev/hd9var /var 8388608 7880328 7% 580 1%
/dev/hd3 /tmp 8388608 8342704 1% 123 1%
/dev/fwdump /var/adm/ras/platform 262144 261448 1% 4 1%
/dev/hd1 /home 2097152 1928856 9% 131 1%
/proc /proc - - - - -
/dev/hd10opt /opt 4194304 2851592 33% 6285 2%
/dev/fslv12 /instcd1 41943040 9293200 78% 15850 2%
/dev/fslv00 /sapmnt/P11 10485760 8752544 17% 5955 1%
/dev/fslv01 /usr/sap/P11 10485760 8244400 22% 1319 1%
/dev/fslv02 /db2/db2p11 4194304 3100248 27% 3941 2%
/dev/fslv03 /db2/P11/log_dir 20971520 18346264 13% 26 1%
/dev/fslv04 /db2/P11/log_dir2 20971520 18346424 13% 26 1%
/dev/fslv05 /db2/P11/db2dump 4194304 3422024 19% 23 1%
/dev/fslv06 /db2/P11/sapdata1 272629760 220914312 19% 106 1%
/dev/fslv07 /db2/P11/sapdata2 272629760 220914000 19% 106 1%
/dev/fslv08 /db2/P11/sapdata3 272629760 220914304 19% 106 1%
/dev/fslv09 /db2/P11/sapdata4 272629760 220914280 19% 106 1%
/dev/fslv10 /db2/P11/saptemp1 10485760 10483352 1% 47 1%
/dev/fslv11 /db2/P11/mirrlog 20971520 20967456 1% 7 1%
/dev/fslv13 /db2/P11/archlog 94371840 46774984 51% 380 1%
/dev/fslv14 /sap/auditlog 12582912 12311392 3% 51 1%
*****rpd11:/usr/sap/trans /usr/sap/trans 33554432 11883968 65% 5738 -
Differece bet GLPCA and GLPCT in ECC 6 with classic PCA
Hi Ajay and Experts,
Thank you for helping me till now for all the issues in COPC and COPA we are all set.
I found once issue in PCA today as below, can anyone please give inputs.
I have reviewed all the threads but i want to specify my case first.
We are in ECC 6.0 with Classic PCA.
We are using Sales order substituion to get the PCA based on Region.
User dowsnot want to use transactions iKEK etc., for Balance transfers.
We crated on e kind of dummy PCA and assigned in 3KEH so all the balance sheet accounts posting with same.
we are trying get balances from GLPCT.
I observed the line items are getting updated in GLPCA but not in GLPCT, so our report get failed.
Can you please help me as early as possible.
Thanks,
SudhaHi,
My problem is resolved.
Actually the values in GLPCA and GLPCT are getting updated as expected.
The problem is with my custom report, i have identified and working with my technical team.
Thanks,
sudha -
How SAP ECC interface with SAP SRM
Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
MariaDear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query:
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh -
Upgrade of Sourcesystem SAP EHP3 SAP ECC 6.0 to SAP EHP4 SAP ECC 6.0
Hi,
I noticed there is a lot of questions on the testing procedures for BI side when Upgrading the source system from R/3 to ECC 6.0. But noticed there aren't many posts on when doing Ehancement Packs. But I believe the process would be more or less the same?
My project is doing an Upgrade of SAP EHP3 SAP ECC 6.0 Stack03 to SAP EHP4 SAP ECC 6.0 Stack07. BI Side is also upgraded, but I am more interested in the impact of the Upgrade's Source System (ECC) on BI.
I believe the amount of impact is less as compared to an upgrade from R/3 to ECC, but there still should be impact to BI somehow.
Basically, from what I have researched, there correct procedure is as below:
Pre-Upgrade
1 - Lock users in ECC
2 - ensure that the Delta queue is cleared in RSA7
3 - check the PI in ECC6.0 ( What is PI???)
3 - stop all loads from BW
Post-upgrade
1 - Check Source System connections
2 - replicate all data sources in ECC (when I do a check connection in RSA1 I get the message "No metadata upload since upgrade" which I believe is due to this step not done yet? Is it ok to replicate all datasources??)
3 - activate all rules thru program (RS_TRANSTRU_ACTIVATE_ALL. Is it ok to activate all transfer strucs?)
4 - run Init w/o Data Transfer for deltas
5- run and then check extraction for full & delta loads
Appreciate if I could your expert inputs on the procedures above? Maybe a more detailed step by step procedure or comments are most welcomed.
Thanks.Additional information:
I start the upgrade from SAP ECC 6.0 with a dual stack.
SAP advised me to download the following file to start the upgrade
SAPehpi_68-10005800.SAR from the SMP
Download path: Browse our Download Catalog--> Additional Components --> Upgrade tools --> SAP EHPI Installer --> SAP EHP Installer 7.00.
Start the upgrade without the jce_policy_zip extension. This was written in note 1302772 .
Have more luck with it. -
Good Afternoon Gentlemen,
I need your help understanding what's involved on a upgrade we need to perform.
Right now we have a SAP ECC 6.0 with the following components:
SAP_BASIS 701 0012 SAPKB70112
SAP_ABA 701 0012 SAPKA70112
PI_BASIS 701 0012 SAPK-70112INPIBASIS
ST-PI 2008_1_700 0004 SAPKITLRD4
SAP_BS_FND 701 0012 SAPK-70112INSAPBSFND
SAP_BW 701 0012 SAPKW70112
SAP_AP 700 0028 SAPKNA7028
WEBCUIF 700 0012 SAPK-70012INWEBCUIF
SAP_APPL 604 0012 SAPKH60412
SAP_HR 600 0090 SAPKE60090
ST-A/PI 01N_700ECC 0000
All other components are 600 or 604.
My functional team agreed with the client a upgrade for components 7.4 in order to install SAP BPC.
In my understanding, the current version is a ECC 6.0 on a NW 7.0 EHP1 (ABAP) and since we're being asked to upgrade to components 7.4, we're going to upgrade to ECC 6.0 on a NW 7.4 (we can choose the EHP freely). Is this correct?
Can you also point me the direction for the right documentation in order to do this the smoother way possible?
I thank you all in advance.
Best Regards,
Pedro GasparHi,
This is SAP Business one system admin forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan -
File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2
Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus
Maybe you are looking for
-
My PC does not return to the source document I print from
I had a setting control for this in XP but can't find the page I got it from.<o:p></o:p> <o:p> </o:p> In ANY application or browser this happens. I print from a specific Excel workbook, by example, when I have a number of them open. The system does
-
Open Purchase requsitions / orders
Hi, Can any one please let me know where can I see the Open Purchase requisitions / orders for a given material in a plant ( I do not want the report of all the purchasing docs, I want just the open ones) Thanks, SS
-
ServletInclude JSP not loading without refresh
JDeveloper 10.1.2.1.0. Using servletInclude in UIX page to load content of JSP. The JSP contains an input form. It doesn't load until I refresh the browser (IE or Firefox). If I servletInclude a JSP that only has an HTML heading, it renders the when
-
Oracle 9i (amd64 version) with Fedore Core 2 (FC2) x86_64
I just managed to get the above to install, and it seems to work. This post is here to tell what I had to do to get it to install. I installed it custimized to not include Enterprise options, Enterprise Manager and HTTP server. I also chose not to cr
-
Simple drag and drop programme. Bug
Hi. I have a simple drag and drop app for learning English. You hear for eg: banana and have to drag that object to a certain area. When my little kid plays it she finds bugs - she's my researcher. It's hard to explain the bug as its hard to get it b