SAP ECC and SCM 5.0, CIF question

I have set up ECC to connect to SCM 5.0 via CIF, and have tested the RFC connections. Test results say it's working.
Now what are the next steps? LiveCache? I have a material in APO which needs to talk to liveCache to withdraw some data. Can someone give me some direction on the steps to follow after SCM installation? Thanks!!!

Mon_Ami,
It depends upon what business requirement you are trying to fulfill. You say you want to withdraw some data from livecache. What data? Why?
Do you want to forecast your company's demand? Do you want to create supply elements? Do you want to perform Availability checks? Do you want help in determining the best planning solution for a planning problem, based on constraints that you define? Or.....?
There are many business requirements that can use SCM as a solution. Normally, one doesn't implement SCM without having a concrete business requirement. What is yours?
Best Regards,
DB49

Similar Messages

ECC and SCM connection

Hi folks,
i would like to see ECC and SCM scenarios connected by CIF, how ever HU2(ECC) and HU8 (SCM) systems are not interconnected. let us know whom do we need to contact in this regard.
Thanks in Advance ...

Hi Amit,
The ES (emphasis on Enterprise Service or Web Service) Workplace Systems are actually setup for customers or consultants to test drive SAP delivered Enterprise Services, so it stands to reason that integration between these systems would be using web services / SAP Enterprise services for the most part.
Trying to contact someone to configure CIF / ALE integration between HU2 and HU8 is not going to work for you.
Regards, Trevor

Communication between ECC and SCM via XI

I am trying to set up the scenario 'Purchase_Order_Processing' between
ECC and SCM using XI. The SCM content for XI has been loaded into XI
and this scenario is included in the content.
We are running the following:
ECC - Version 5.0 - 640 SP level 12
XI - Version 3.0 - 640 SP Level 14
SCM - 4.10 - 640 SP Level 12
The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
The Error XML is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error
explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any assistance would be much appreciated.

Sravya,
Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
Richard

Block Demand Depend Interfaces between ECC and SCM

Hello All.
Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
I need to do this because ECC writes over my plan in SCM.
Thanks and Best Regards

Hello PrasunM
For example:
When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
Best Regards.

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

SAP EarlyWatch Alert in SAP ECC and SAP PI

Hi Experts,
Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
Example as below:
Initial System
Initial Action
Total Resp. Time in s
% of RFC Load
Avg. Response Time
Avg. CPU Time
Avg. DB Time
Avg. Roll Wait Time
PI
SAPMHTTP
200.261
15,00
600,3
70,4
165,4
1,5
The total response time in SAP ECC by PI system is 200261 secs.
I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
Thanks in Advance.

Hello Pascal,
No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
This is because of the fact that the checks for both these system types are different.
Regards
Amit

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

What oracle edition required for sap ecc and ep in one box

hi friends
what oracle edition required for sap ecc installation which supports the HA and disaster recovery plan
10g
1. Oracle Database Standard Edition One 10 g
2. Oracle Database Standard Edition 10g
3.Oracle Database Enterprise Edition 10g
3. Oracle Database Express Edition 10g
4. Oracle Database Personal Edition 10g
thanks in advance friends
regards
raja

hi,
I believe that SAP only support enterprises edition one because you'll get all database features.
ardhian
http://sapbasis.wordpress.com

How to or Step by step to connect SAP ECC and Data Integrator

Hi,
I need a document How to or Step by step to configure and connect SAP ECC 6.0 and Data Integrator or Data Services.
someone help me?
thanks!!

Antonio,
Please find the detail guide step-by-step document for different connectivity types at this following link on SDN under business Object section.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/ConnectingtoSAP]
Thanks,
Ashok

Difference Between SAP ECC. 6.0 and SAP SCM 5.0

Hi Gurus, pls answer the questions below
1) What is the Difference between ECC and SCM
2)Is it mandatory having ECC if i have SCM
3)What are functionality availble in SCM when compares to ECC.
4)SAP-IS Retail is a Part of ECC or SCM
thanks
Satish

Dear Satish,
1) ECC is the SAP ERP Central Component and you can connect to this the SCM system (Supply Chain Management).
2) yes it mandatory to have at least one ECC if you have SCM
3) There are several functionalities availble in SCM when compares to ECC. Please read http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
and
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
for application help and for available functionalities.
4) Regarding IS Retail please read note 157755. Here you will find your answer how can you instantiate your R/3 system as a Retail system (SAP Retail).
I hope this helps.
Regards,
Tibor

Master Data in SAP SRM and SAP ECC

Hi all,
I have the following question: after I create a vendor in SAP ECC and, than, I replicate it in SAP SRM (through transaction BBPGETVD):
1. if I modify all field of vendor on SAP ECC, is there an
   authomatic way which update vendor data on SAP SRM, or
   it is possible only through BBPUPDVD transaction?
2. if I modify all field of vendor on SAP SRM, is there an
   authomatic way which update vendor data on SAP ECC, or is it possible through some transaction?If yes, what is it?

Hi Maria,
You can execute BBP_VENDOR_GET_UPDATE_JOB report using SA38 txn. to automatically replicate vendors from R/3 to SRM.
Schedule a back ground job for this report depending upon the frequency of update that is every day or every hour based on your requirement.
The report BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
Make the Global settings for vendor replication and synchronization in SPRO
SPRO -- > IMG ---> Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
There is no automatic way for updating vendors in R/3 after making changes in SRM.
Hope this makes you more clear. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

Hi,
I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to Broadcast from Crystal reports?
I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
What is best option for email/broadcasting for Crystal Reports?
Your help is appreciated.
Thanks.
SVK.

Hi,
I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
Ingo

Idocs are not prosessing even after ALE settings in SAP XI and ECC

Hi Experts!,
<b>I have a system which has SAP ECC and SAP XI 3.0 installed with 2 instances on the same operating system. ( In MMC you can see ECC and XI under the same SAP console tree ).
I have made many times all possible ALE settings between ECC and XI and I was unable to deliver the IDOC [ Idoc scenario- unable to get the IDOC in the receiver side (R3)]
Could any one please let me know how to solve this issue.
Useful answers will be rewarded.
</b>
Thanks in advance!,
Sunil

Hi Martens,
I appreciate your kind reply, error : Unable to convert ALE logical system.., this is the error message I am getting, while I do File to IDOC scenario. So what may be the wrong thing in this configuration, Have done ALE settings ( Log sys, assign log sys, partner profile, port and RFC connection from R3 to XI).
So could you please let me know the solution.
regards,
Sunil

Deploying / Transporting SAP HANA-ECC and BW Solution?

Is there one centralized deployment guid for SAP HANA solutions in the SAP ECC and SAP BW environment?
Please can one of you provide some directions to a centralized guide to move / deploy SAP HANA solutions build in one system to Quality and/or production environment?

Rama,
there's a pretty straight forward export/import functionality for moveing models from dev to qa and prod. Please see the SAP HANA Modeling Guide, chapter "Processing Information Objects".
You can also use CTS+ in conjunction with this functionality.
Regards,
Marc
SAP Customer Solution Adoption (CSA)

SAP ECC and SCM 5.0, CIF question

Similar Messages

Maybe you are looking for