SAP ECC S&OP Macro for this requirement
Hi there,
I am doing flexible planning in S&OP and as a result maintained a row to calculate the actual inventory cost. The S&OP is done at Product Group level with many FERT in it per group. So when I do my S&OP plan I want to be able to calculate the members together standard cost from material master and do a sum total of it.
For example:
PRODUCT GROUP: PG1 has
MAT 1 - 25%
MAT 2 - 25%
MAT 3 - 25%
MAT 4 - 25%
MATERIAL MASTER: St.Cost
MAT 1 - $1.5
MAT 2 - $2.5
MAT 3 - $1.0
MAT 4 - $2.0
S&OP forecast for PG1 = 100 units ( which eventually passes 25% each to its members during dis-aggregation )
MAT 1 - 25 units
MAT 2 - 25 units
MAT 3 - 25 units
MAT 4 - 25 units
So, when the macro runs for this product group inventory calculation, I would want the output to be 25(1.5) + 25(2.5) + 25(1.0) + 25(2.0)
Any advise ?
Thank you
Any one, thoughts? thanks
Similar Messages
-
Hi All,
I need the materials SAP125 (SAP Navigation),
ERP001 (Management Empowered by mySAP ERP),
ERP020 (Mangagement Empowered by mySAP ERP Financials),
SM001 (SAP Solution Manager)
Your help is appreciated...
Thanks in advance
KeerthiHi Keerthi,
The registration of the exam is depends on your confidence.But once you register the exam you have to attend the exam.SAP do not accept unless it is very serious reason.
There is nothing like time will be given for preparation.If you go through the SAP, there are a few education centers world wide.You can check with your nearest center.The examination dates are fixed.
I don't know about the materials which you got from the web.SAP AG will keep on updating the materials for every version.
My advise is if you are very perfect in TFIN50,52 and e-learning materials then only register for the exam.Certification exam is not easy.
Best Regards,
Mohan. -
Please provide the abap code for this requirement
note : if the below mentioned user exit is not suitable please find the suitable user exit and provide the code for this requirement.
The User-exit MEFLD004 is only to be used at PO level (ME21N/ME22N).
When PO is create or changed (ekko-ebeln) user exit MEFLD004 is triggered which check for the business requirement of the PO check for PO doc types (ekko-bsart) :z4,z6,z11,z12 from the table ekko and Account Assignment Category (knttp) is either N or K then stock process follows.
When an PO is cancelled, all entries will have to be reversed
The Buffer table for the PO will have the following fields:
Purchase order Number EKKO-EBELN
Line item number of the PO EKPO-EBELP
Vendor Number EKKO-LIFNR
PO Quantity EKPO-MENGE
PO Nett Price EKPO-NETPR
Base Unit of Measure EKPO-LMEIN
Account Assignment Category EKPO-KNTTP
PO Doc type EKPO-BSART
Plant EKPO-WERKS
Purchase Org EKKO-EKORG
Purchase Group EKKO-EKGRP
Company code EKPO-WAERS
Item category EKPO-PSTYP
PO Doc Date EKKO-BEDAT
No duplications are allowed for any created, changed or cancelled purchase orders. If such a case occurs, the record will be updated with the latest update time stamp. This custom table will be keyed by purchase order number.Cross-post: http://forum.java.sun.com/thread.jspa?threadID=763485
-
"You must specify a value for this required field" in SharePoint list
HI All,
I have a couple of taxonomy fields in my content type. When I try to add a new item with my content type and save, I'm getting an error message "You must specify a value for this required field" against each taxonomy field. I'm not sure what am
I missing. I deleted the content type and added that again to my list but still no luck. Can someone please help me out? Thanks.
Regards,
SC Vinodhi
it depends how you updated existing field. We faced with the problem that update of taxonomy site column was not propagated to the lists. In Sharepoint when content type is bound to the list, new hidden content type is created for that list - you may check
it if will enumerate
SPList.ContentTypes property. And when you try to update site column changes may not be propagated to these list content types. In order to update it you need to get reference on a field from list content type and update if explicitly.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com -
Could you please suggest me the scenario for this requirement ?
In module booking process we need the following process
1.Student select their interested event package via website.
2.Advisor review the student's event package list.
2.1 In case of REJECT : student need to revise their list
2.2 In case of APPROVE : all event package have confirm and run fee calculation.
The information above is shortly requirement , if any one have suggestion for this requirement please suggest me.Vorad,
I have some suggestions for you:
1. Create the module/event booking with 'Manual Conditional' flag. Then, when the advisor approves a booking, remove the conditional flag. If the advisor rejects, cancel the booking. Here, you need to create some kind of UI for the advisor to review and approve/reject the requests.
OR
2. Create the booking using a booking status such as 'pre-booked'.
OR
3. Don't create any bookings from the student side. Just create a booking plan instead.
OR
4. Look at a subtle process change that would let you use more out-of-the-box user interfaces/processes. Students simply request special booking authorization for the event packages they want. This automatically sends workflow approval messages to the advisor. Then, just have a general rule which blocks all bookings that don't have this special authorization. Once the student has a special booking authorization, he can just go into the course registration self-service and book the approved event packages.
Michael -
Pls give me the solution for this requirement
Hi experts ,
pls give me the solution for this requirement
what we have to do when basis guys are tranported my object to the production without completting . how can we rectiify this .
thanks in advanceHi
After Transporting a request or released a request you cant do any thing in that so now you have to create a new Transport request for your report continue with that. After completion transport it . It will makes no difference it will just over write already existing report
Reward alll helpfull answers
Regards
Pavan -
Regarding select statement for this requirement
Hi................
good evening
here is a requirement.
i want to retrieve data from the following table.but how to join these table is my dought.
tables fields
t001w--werks " plant id
t001w--name1 " pl;ant name
t001w--regio " plant address
ekko--ebeln " purchase order
ekko-erdat : creation date
ekko-ernam "name of the person
ekpo-ebelp " item
ekpo-bstyp "purchase order type
eket-erdat " delivery date
mara-matnr " material number
these are the tables and fields.now we want to retrive data from these tables
how we have to code select statement.
selection-screen is
plant id
order type
delivery date
please provide select statement for this requirement.
thanks and regards.
k.swaminath reddy.Is this what you are looking for?
SQL> CREATE OR REPLACE FUNCTION f_team
2 RETURN VARCHAR2
3 IS
4 s_return VARCHAR2(500);
5 BEGIN
6 FOR i IN ( select team from t_team order by 1) LOOP
7 s_return := s_return || i.team || ', ';
8 END LOOP;
9
10 RETURN substr(s_return, 1, length(s_return) - 2);
11 END;
12 /
Function created.
SQL> SELECT f_team FROM dual;
F_TEAM
Australia, Bangladesh, England, India, Kenya, Pakistan, South Africa, UAE, USA, West Indies, Zimbabwe
SQL> -
Which Hardware shud i go? For this requirement.
Hello all,
As per requirement, In Oracle 9i, 1000 tps(transaction per sec) requirement ( 60% insert update and 40 % search operations). Dose oracle 9i ( standard ed.) with 2 CPU machine will handle this requirement ?
What will be performance figure on LINUX/SUN in term of tps in oracle 9i standard ed.?
Could you all please suggest me for what hardware platform should i go and also what RAM should i use here.
Database Size will be apporx 10G
Thanks in Advance!!
Its urgent please....
PankajWe have no idea what your hardware will be or whether these will be long running or short transactions or whatever.
Your question is not easy to answer; the only way of getting a definitive answer is to test your workload over a period of time.
For this there are tools which will load a system up : for example Hammer Ora or Swingbench are both freely available. -
BPM or Java/Db for this requirement
Hi,
Here's the requirement: A user creates a document (using webcenter portal UI) and he has a provision to add 'n' number of reviewers both sequential and parallel reviews are needed and also a combination is needed, which the user will add through the UI page.
The requiment also states that the user should be able to modify the review steps. Suppose A has reivewed and B is yet to review, he should be able to replace B with C or even delete his review. Bottomline is that, the client needs a free hand to manage document review/approval as we deal with physical docs.
The documents will be stored in Oracle UCM and I am using JSR 286 portlets for the UI.
Is BPM a right thing to use here? can I dynamically build/query update BPM processes? OR shall I use java with Db to achieve this. The later gives me more control and developers are readily available for this. I have very limited knowledge about BPM.
Request your suggestions here. Please help......
Thanks in advance.
Regards,
Yousuf
Edited by: Oracle Enthusiast on Feb 13, 2013 10:44 AMHi Lavanya,
I think the conditional reciever determination in your case might not work. Reason being, you are trying to send chunks of message i.e., line items based on condition.
What i am trying to say is, suppose one IDoc has 3 lineitems and for each line item you are trying to achieve the conditionals receiver determination.
According to me, you can one of the possible solution
1. You have to genearte 1 IDoc message for each line item and then use the condition
2. Use BPM
Regards
Ramesh -
Dear Cons
In a service p.o we have given service qty. as 10 ea & price 100/- inr . we want in which table this data is going to store. Also for Text entered in the doc. Header , for this we want to know in which table it will available.
thanks
nrkHi
Check table ESLL.
regards
rb -
How to form a query for this requirment
Hi Friends,
I have a database table in which I store the employee data along with his phone number. Now this row of data can repeat for different phone number depending on if it is office phone or home phone or cell phone.
But in the output of query, I need name of empoyee and other three columns namely "Home Phone", "Office Phone" and "Cell Phone".
If employee has three rows for each kind of phone, then in the result of query all three columns for phone numbers should be filled, otherwise as many columns should be filled with data as different phone numbers employee has.
Can any one please post SQL query for this scenario ?
Thanks in AdavanceI cannot imagine, that second and third query are
under any circumstances faster as first one, but i
can imagine that they are slower You stated that query without the inline view can only be faster. Did you check on optimizer plans or use tkprof to verify your claim?
A quick check on those two selects
SELECT object_id, object_type, object_name
FROM user_objects;
SELECT object_id, object_type, object_name
FROM (SELECT object_id, object_type, object_name
FROM user_objects)
;didn't show any changes in the explain plan unter 10g1.
C. -
How should i write a pcr for this requirement?
Dear Friends,
Can any tell me whether we can write a pcr in such a way that if the person resigns the company on any day after 15th his full absence quota(for that month) should be accrued.
if yes can you tell me
what are the key decision parameters i have to use in writing the pcr.
waiting for you kind reply.
Regards,
Sai Prasad.Hai Prasad,
I can give you the logic, cannot write exact rules.
While genegarting absence quota
- Check for termination action using OUTWPMASSN
- If yes
Check for Action year current year. (HRS=YSAY, HRS?CURYR)
- If its equal to 0
Check for current month (HRS=YSAO, HRS?CURMO)
- if its equal to 0
check for current day (HRS=YSAA, HRS?CURDY
- if its >=15
generate quota
- Exit
(Note: for this logic you have to generate monthly quota)
With regards
Shyam V -
Need input for this requirement?
Hi All,
I got new requirement. In this i need to display one world map on that map i have so show blinking star for the customer countries.
if the user click on perticular blinking star i need to display some data.
How to achive this? please help me out.
Thanks and Regards,
Phani Kumar.Phani,
You can also use Google Maps API .You can find help in below links:
http://code.google.com/apis/maps/documentation/reference.html
http://net.tutsplus.com/javascript-ajax/this-is-how-you-use-the-google-maps-api/
-Suresh -
Which scenario (adapters) is fit for this requirement
Hi Experts
I have an requirement , have to fectch the data from SAP tables ( ECC6.0) MARA, MARC and MAKT ( using join) and sent system B ( which will request data) through sap XI
please explan which is the better scenario needs be used and what are the adapters required?
Thanks in advance your help
Regards
neeruHi,
it depends mainly on yours needs.
Do you have to send data in "delta" mode, so only the changed material.
and do you send one by one ? or do you have to create only one big file.
Do you want a log ?
if you have to send changed material, the easiest way to pick-up changed material is to use change pointers, and send data by using idoc MATMAS.MATMAS05. in ale config, choose "collect idoc" and use prog RSEOUT00 that you trigger by a job.
with idoc, you have standard log: tx WE02.
if you have no to send changed material either you use Idoc, or you define an inbound service interface in PI, on which you generate an abap proxy in ECC (tx SPROXY). Then to extract data, and send them to PI, you have to create an abap program with join SQL and to call you abap proxy to send data to PI. With proxy you have a log in standard, so you have to create it also in your abap program: WRITE instruction, ALV or SAP application log (tx SLG0 / SLG1).
proxy = XI adapter.
regards
mickael -
How to use time series functions for this requirement
we are on OBIEE 11g (11.1.1.5)
Any pointers and links are really helpful.
I have a requirement where YTD sales are displayed in a column. We wan to compare that number to what that number was last year at the same time. Tried to use TODATE, AGO and it did not work.
|| used for column seperation below.
ProductGroup || YTD Sales Rev||YTD Sales Rev 1 Year Ago||YTD Sales Rev 2 Years Ago
Climate Solutions || 1.7 mil (1/1/2011 - 7/1/2011) || 1.45 mil (1/1/2010 - 7/1/2010) || 1.15 mil (1/1/2009 - 7/1/2009)
Thanks in advance
kris
Edited by: user566193 on Aug 10, 2011 6:06 PMKris,
Basically you want to combine the 2 time series functions here i.e. TODATE & AGO.
Here you go..
You can create first a YTD logical column in BMM say YTD Sales Rev..Then create another logical column with calculation as AGO(YTD Sales Rev, YEARDIM, 1) or AGO(YTD Sales Rev, MONTHDIM, 12).
Similarly, you create other measures...OBIEE 11g has time series function in Answers as well but I'd say try to create using RPD as you to calculate 1 logical column based on another. Better to push it on RPD side.
Hope this helps
Maybe you are looking for
-
Mail rule no longer works - how 2 debug?
i have a mail rule which takes an attachment & sends it on to an fba for further processing (via a do shell call) then moves the mail to a done folder. my shell script works perfectly when invoked from the cli, but doesn't seem to even get called fro
-
Since updating my software I am unable to access my apps for work specific activities.
Cannot sign in to work related APPS since updating software .
-
Wifi asks for username AND password for iPhone
Hi! So I have moved into a new apartment, and when my iPhone finds the router and tries to log on, it asks for a username AND a password. When I use my Macbook, it just asks for a password, which I enter and get no further problems with. I have tried
-
TS3577 iMovie Javascript error- help is disabled?
Doesn't work and there doesn't seem to be any other articles joined to this one. Didn't work for iMovie 9.0.4 on MacBook Air running 10.6.8.
-
My hard drive broke and I lost my library,
MI have managed to transfer my purchases but thats it any ideas pleasey drive went and i now have a new hard drive when i try and synch my ipad itunes tells me it will wipe out all my stuff on the ipad i reall want to transfer it to my new library as