SAP ECC, SRM and SNC integraton

Hi everyone,
I want to know if we can integrate ECC, SRM and SNC. We don't want to use SUS, we want to use SNC. Is it possible to have this implementation? If yes, what is the correct technical scenario for SRM (Classic or Extended Classic)?
Thanks,
Ivá

Hello Iván,
Regarding your first query, "What kind of changes we can do in SNC " --> As a vendor we can modify the PO quantity and PO delivery date only and update the same as POR. We cannot add any items in the PO.
Regarding your next query ," changes cannot be send to PO if we are in extended classic?"  --> i think we can send the changes to the SNC even in the extended classic scenario , but we need to then customize our system accordingly with regards to the document types used , vendor classification , idoc and xml mapping , etc.
We will be using some sort of SRM - SUS integration here in the extended classic.
Also changes can be synched between SRM - ERP - SNC. and we can have the extended classic with ASN creation in SNC.
Best Regards,
Rahul

Similar Messages

  • Difference between SRM and SNC

    Hi all,
    i frequently get this question from many of my friends who work on SRM, as what is the difference between SRM and SNC.Because the supplier collaboration part of SNC resemles with few functionalities of SRM.
    What kind of industries go for SRM?
    What kind of industries go for SNC?
    Regards,
    Nandan

    Hi Nandan
    SRM and SNC have few functionalities common.
    SUS and Plan driven procurement. Like SNC Purchase Order Collaboration, these are direct procurement(Supplier known).
    Where SRM has other business process like Self Service Procurement, where in they can create quotations and then compare and select the best supplier(In direct Procurement)
    In SNC we do not support Service Orders, We only support Quantity Orders. Where SRM can support both.
    They have other Business process(SAP SRM Supplier Collaboration), where in the solutions and backend systems like SAP Supplier Relationship Management (SRM), SAP Product Lifecycle Management (PLM), Collaboration Folders (cFolders), and SAP Supply Chain Management (SCM), to provide collaborative planning, sourcing, procurement.
    Where SNC plays a material monitor here communicating between OEM & Supplier Org
    SRM support both quantity procurement and service procurement directly and indirectly.
    Where in SNC supports direct quantity procurement.
    It is the business need, upon which they select SNC or SRM.
    Best Regards
    Vinod

  • Connectivity between SAP ECC system and SAP BI

    Connectivity between SAP ECC system and SAP BI
    Hi BI-experts!
    I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
    The Loading process is hanging in processing step u201CSERVICE APIu201D.
    The process  in hanging in status "yellow" and then changed after a while to status u201Credu201D.
    [0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
    The following steps within Load process are yellow and then red:
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
    Request IDoc : Application document posted (is green)
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Info IDoc 3 : sent, not arrived ; Data passed to port OK
    Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one tell me whether my distribution model or other settings are wrong?
    I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
    Thank you very much!

    Hi Holger.
    this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
    1. check your BI system logical name from the myself source system.
    2. go the ECC and run the transaction sm59
    3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
    4. double click it and edit it now check whether the Target hostname or ip is OK.
    5. In the logon tab check the client number User and password settings.
    Save it and test it with both Connection Test and Remote Logon.
    if every thing work fine i hope your problem will be solved.
    kind regards,
    Zeeshan

  • External System Handling Units to SAP ECC System and Pack Outbound DO

    Hi Guru
    Packing Is done in External System for SAP ECC Sales Order Before Outbound Delivery Creation.
    How to  capture External System Handling Units in to SAP ECC System and Pack Outbound Delivery Line Items.
    Please help
    Thanks In Advance
    SR

    Bit of a cart-before-the-horse situation here.
    Lets assume that your business process goes ahead and creates a delivery note, but leaves it unpicked and unpacked.  Picking and packing will occur with the inbound IDoc from your external system.
    Map the external system data into a basic IDoc type DELVRY0X.  I think the current one is DELVRY07. 
    Use an inbound IDoc message type SHPCON to carry the external system data into your ECC system. 
    The process code DELV works well with DELVRY0X inbounds.  It has lots of user exits.  You will need them because you will need a determination process to know which delivery note to update with the external system data.
    When you map the handling unit data correctly into the IDoc, the process code will create the handling units on your delivery.  The external handling unit numbers should end up in VEKP- EXIDV.
    Regards,
    zKen

  • Org management (integration with SAP ECC 6) and shopping cart approval

    Background:
    We currently use EBP 3.0 - Classic Scenario.
    Our current Organisational plan was manually created in EBP, and is not the same as the HR hierarchy in SAP ECC 6
    Shopping cart approvals use the workflow WS10000276 u2013 Approval Single Level over Limit, which utilises the SLAPPROVER attribute. The user name assigned to the SLAPPROVER attribute does not have to be the manager of the user. To meet our Business requirements, a fairly flat structure was created at the time we implemented EBP 3.0. The approval level an approver is allowed to approve up to is controlled with the use of roles assigned to a user.  Each of the approval roles has an appropriate value set against the BBP_APPROVAL_LIMIT attribute under Personalisation.
    Moving onu2026
    We are just about to move from EBP 3.0 to SRM 7.0 u2013 Classic Scenario - by carrying out a new installation.
    Our Business requirement has changed, in that they want the approval of shopping carts to be carried out by the line manager, if that person can approve the value of the shopping cart. If not, for the approval to go up the HR hierarch until a manager with a suitable level of approval is found.
    I believe it is possible to create the Organisational structure in SRM from the HR hierarchy in SAP ECC 6. I have tried to do this in our play/test system using - Integration Business Partner-Organizational Management, without much success as yet!
    I have a few questions in this area:
    1.     Not all of the users in the SAP ECC 6 HR hierarchy will be SRM users. E.g. In the SAP
                 hierarchy there are 3 users u2013 User A, User B and User C. User B is the manager of User
                 A and User C is the manager of user B. In SRM only User A and User C are users. That
                 being the case, is it still possible to initially create the organisational in SRM from SAP ECC6?
    2.     If it is possible to create the organisational structure as described, then using Process
                 Controlled Workflow we could use the Shopping Cart BC Set One-step manager approval.
         If we did this, what would be the best way to incorporate the approval limit of a manager?
         Can this be simply achieved by setting the BBP_APPROVAL_LIMIT attribute in conjunction
                 with the One step manager approval?
         We want to avoid having to use the SLAPPROVER attribute due to the high level of
                 maintenance we currently experience.
    Thanks to anyone who can advise me.
    Claire

    Hello Clarie,
    this might help
    HR Data Synchronization (Org Unit, Position and Employee) to SRM
    Arshad

  • Sap ecc 5 and 6 material

    dear friends,
    can u send me fi/co ecc 5 or 6 material, i.e., acxxx series pdf files, and closing cockpet material,
    i will reward u excellent points,
    regardsx,
    rajendra

    dear friends,
    my id is [email protected], please send me ecc 5 or 6 material, fi/co materail, especially acxxx series files,
    i will reward u suitable points,
    regards,
    rajendra

  • Getting No rights error in Crystal Reports connection with SAP ECC 6

    I am ABAP/BI developer and would like to work in Crystal Reports 2011. Currently, We have SAP ECC 6 and BI 7 set up. I have installed trial version of Crystal Reports 2011.
    I am getting error while trying to create blank report in Crystal Reports:
    Create New Connection -> SAP Tables.. -> entered SAP Development server user id and password -> following error message :
    LOGON failed
    Details : You do not have necessary rights to design reports against the SAP system. Please check with your system administrator.
    My user id has all rights in development server.  So, is any special rights require? OR do we have to install any patch for Crystal Reports at SAP level?
    Please guide me.

    Hi,
    To be able to report off an SAP data source in Crystal Reports, request the SAP Administrator to set the appropriate authorizations for the user.
    For a list of authorizations that are necessary for each type of SAP connection, consult the document:
    BusinessObjects XI Integration for SAP Installation Guide
    In the "Authorizations" chapter, there is a description of each authorizations needed for each type of connection and actions.
    ( The document is attached to this SAP Knowledge Base Article in the attachment section )
    In addition to the authorizations specified in the SAP Integration Kit Installation Guide, the following authorizations are required:
    For Authorization object: S_RFC with Field name: RFC_Name. According to the installation guide the values should be: SYST, /CRYSTAL/OPENSQL
    Additionally you will need the value: SUSR as well.
    For Authorization object: ZSEGREPORT with field name: ACTVT. According to the installation guide the value is: 02 (Change)
    Additionally you will need the value: 01 (Create or generate) as well.
    Thank you.

  • 2 BI systems are connected to one SAP ECC-system

    HI,
    I have the following situation: we have one SAP ECC-system, and there is already one BI-system for one company code connected. I would like to connect now a second BI-system for another company code. Both BI-system uses more or less the same infocubes in controlling. I would like to copy all data sources in the ECC, so that I have every datasource twice, one for the first BI-system and 2 for the second BI-system.
    I thougth I could use transacioin code ROS2 for this. I created the datasource Z_CO_OM_CCA_1 and would like to use the function module BWOM_RS_GET_CTRCST and the extract structure ICCTRCST like the standard datasource 0CO_OM_CCA_1. During saving I get the error message TABLES-parameter E_T_DATA is missing - what does this mean?
    Is there another solution for my problem?
    I appreciate any kind of help!
    Thank's a lot
    Christine

    Christine,
    I would recommend to have a, lets say, maximum number of selection fields available and nothing BW-system specific. So as I mentioned before, no need to have the same datasources twice. In case of some, e.g. the logistics datasources, this might also be a enhancement/development that might be totally out of your budget. (Think about the setup tables, the processes to fill them....)
    regards
    Siggi

  • Master Data in SAP SRM and SAP ECC

    Hi all,
    I have the following question: after I create a vendor in SAP ECC and, than, I replicate it in SAP SRM (through transaction BBPGETVD):
    1. if I modify all field of vendor on SAP ECC, is there an   
       authomatic way which update vendor data on SAP SRM, or  
       it is possible only through BBPUPDVD transaction?
    2. if I modify all field of vendor on SAP SRM, is there an   
       authomatic way which update vendor data on SAP ECC, or is it possible through some transaction?If yes, what is it?

    Hi Maria,
    You can execute BBP_VENDOR_GET_UPDATE_JOB report using SA38 txn. to automatically replicate vendors from R/3 to SRM.
    Schedule a back ground job for this report depending upon the frequency of update that is every day or every hour based on your requirement.
    The report BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
    Make the Global settings for vendor replication and synchronization in SPRO
    SPRO -- > IMG ---> Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
    There is no automatic way for updating vendors in R/3 after making changes in SRM.
    Hope this makes you more clear. Clarifications are welcome.
    Award points for helpful answers.
    Rgds,
    Teja

  • Logical systems assignment when SRM and ECC are on 2 different servers

    Hi SRM guru's,
    What is the standard practice for Logical system creation and assignment when  ECC and SRM are on 2 different servers.
    I could not able to find which i created a logical system  in SRM server which i created in ECC
    Same for the ECC also.
    how do i assign logical system of SRM to ECC
    vice versa.
    your prompt response is appreciated.
    Regards

    Hi Sai,
    Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
    As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
    Logical System : <SID>CLNT<Client Number>
    For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
    You can refer the below document which eplains the creation of logical system and RFC destinations etc
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    Note: Only while configuring the RFC Destination, the servers will play a crucial role.
    Regards
    Kathirvel

  • Configuration related to PO colabration in ECC and SNC

    Hi
    Can anybody throw light configuration related to PO colabration in ECC and SNC.
    Regards
    Raj

    Hi Raj,
    Below link provide you SNC information about Integration ECCPISNC and functionality of SNC
    link http://help.sap.com/saphelp_snc70/helpdata/EN/b4/f20483605b0d4fa856354a986e900d/frameset.htm but if you want configuration document then Click on below link
    http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
    A07_BB_ConfigGuide_EN_DE.doc (Kanban processing)
    S32_BB_ConfigGuide_EN_DE.doc (SCM setting)
    S34_BB_ConfigGuide_EN_DE.doc (Supplier)
    S55_BB_ConfigGuide_EN_DE.doc (Contract Manufacturing Procurement)
    hope this documents are useful.
    Thanks,
    Nikhil

  • How SAP ECC interface with SAP SRM

    Hi all,
    I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
    Thanks, best regards,
    Maria

    Dear Maria Bonomo,
    I have gone thorugh the following link and it seems to answer your query: 
    www.sceis.sc.gov/content/dnld/agydir-1B.pps
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Mapping between SRM and ECC long text

    Hi Experts,
    Please advise if anyone know where SAP do mapping of long texts of SRM and ECC objects. I found it in one program in my last project but forgot the name.
    Regards,
    Kamal

    Hello Kamal,
    You can use BBP_LONGTEXT_BADI for mapping SRM text to ECC text.  SRM needs mapping rules to map SRM text into ECC text.
    For details check BBP_DPO_TO_BAPI_MAP that executes the mapping ( text_copy_rules_be_get ).
    Hope this helps.
    Thanks
    Ashutosh

  • SRM AND ECC

    Dear all,
    Iam new to SRM.pls explain brief about SRM.
    I have installed ECC 6.0 ABAP STACK only hp-ux,db2 9.1.
    pls tell me 1.whether we need to install abap+java stack in srm or only java is enough.
    2.pls tell me brief explanation about how to go about that.
    3.how to link srm and ecc 6.0.whether srm

    Dear Rajesh,
    SRM is a e-procurement solution and it's web based procurement. If you are having MM knowledge then you can understand very easily or Even if you knew sap-abap then you can understand quickly SAP-SRM.
    Please go thorugh the below link then you can understand very easily.
    http://help.sap.com/saphelp_srm50/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
    If you require more clarifications then let me know.
    Thanks
    Ravi

  • SRM and SAP DMS Content server integration.

    Hi Sap Gurus,
    We are having a requirement to maintain the External documents (relating to Shopping Cart and POs) of SRM in the DMS content server,
    is this possible? if so what is the methord that should be used to connect SRM and DMS Content server.
    please eloborate.
    also we would love to make use of DMS funtionality for maintaining documents in SRM, which i tought is not at all possible as we could not run any of the DMS Transaction in SRM like CV01N /2 /3/ 4, is there any way to integrate DMS and SRM.
    Points Awaiting for usefull answers.
    Thanks and Kind Regards
    Priya S

    Hi Priya,
    If i understand your question correctly you want to transfer documents which are attached at the shopping cart level in SRM to flow in to ECC at PR or PO level? If that the case following steps require to have documents flow into ECC.
    SRM Side:
    Implement BADI BBP_CREATE_BE_RQ_NEW (If you are on classic scenario i.e. Shopping cart to PR creation) or BBP_CREATE_BE_PO_NEW (For extended classic) with following code:
    cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
    cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
    cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
    ECC Side:
    -Create new document type for SRM with T.code DC10. Following parameters need to be set for that
    a.     Check Use KPro
    b.     Check Version Assignment
    c.     Check Change Docs
    d.     Assign Internal number range as u201C02u201D and external number range as u201C01u201D
    e.     Select Number Exit u201CMCDOKZNRu201D
    f.     Version number increment u201C1u201D
    g.     File Size u201C10000000u201D
    -     Assign following Object links to the new created document type u201CSRMu201D.
    a.     Type as u201CSRMu201D
    b.     Object as u201CEBANu201D and u201CEKPOu201D respectively
    c.     Object description as u201CPurchase req. itemu201D and u201CPurchase order itemu201D respectively
    d.     Screen number u201C247u201D for EBAN and u201C248u201D for EKPO.
    - Request basis to verify DC30 transaction code that all the necessary document type are allowed to x'fer (i.e. .doc, .xls , .jpg etc)
    With this setting we were able to successfully transfer document from SRM side to ECC side.
    Thanks
    Ritesh

Maybe you are looking for