SAP ECC TO SAP SNC System

Hi Experts,
I have a Scenario like SAP ECC to SAP SNC (ASYNC).
The problem was,  in the SXMB_MONI in the ACK Status it was showing one Question mark (with green colour). and also in the Outbound status, it was not showing any flag.
what is the error at here but it was (ASYNC scenario) why it was expecting the ACKnowledgement.
Thanks in Adavnce,
Ram.

Gangadhara,
In PI/XI with SNC scenarios SAP provides default content such as Message Interfaces, Data Types and mappings.
Take a look at this link, I think it can help you: [http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm]
Gabriela

Similar Messages

  • How to install chinese language in sap ecc 6.0 unicode system

    Hi,
        I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
    guide me for the same where i have to get chinese language,how to install in sap.
    Thanku

    Hello,
    There must be already some value in zcsa/installed_languages in your instance profile.
    Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
    Regards,
    Siddhesh

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • Data load from SAP ECC to SAP BI

    Hello Gurus and Experts
                     I am new to BI and I m almost struggling to find a step by step process in loading data from SAP ECC to SAP BI through generic extractors from VBAK. The Problem is I can create an Infopackage for full update and loaded the records.(Lets say Upto this step 100 records are moved to PSA)
    Then I create a sale order in ECC which is a new record that has to be transfered as delta record.
    Now my questions are:
    Am I correct if I moved the initial records into PSA with Full Mode InfoPackage?
    Should I create another infopackage for delta records with Delta Mode or to change the update mode of the infopackage created earlier for Full Update mode?
    Should I create a new infopackage every time to load the delta records?
    Does separate DTP has to be created for Full and Delta updates?
    Please dont be frustrated if my questions are pointless or childish
    I would be glad if someone demonstrate the solutions in steps
    Thanks in Advance
    Karthik

    Hi Ram,
           I have followed all the steps mentioned by you, yet something is lagging in my end.
    Let me lists the steps done by me and please correct me if i am wrong anywhere.
    1. RSO2 in ECC..
    2. Created DS with short, med and long names in SD application component for VBAK with all the fields unchecked in hide selection except document number, time of document, document date, net
    value of the document and document currency.
    3. mentioned a numeric pointer as Document number for delta and used new status for changed records.
    3. saved the datasource. checked the newly created ds using the tcode RSA3.
    4. Replicated the datasource under SD Application Component in BI and Activated it
    6. Performed Transformations
    7.  created an Info Package with FULL UPDATE and executed. I got 6898 records in my PSA
    6. Created DTP with DELTA. Saved and Executed it. Got 6898 records in my DSO
    7. Created Info Package with INIT WITHOUT DATA TRANSFER and scheduled it.
    8. Switched over to ECC and added a sale order
    9. Created an InfoPackage with DELTA UPDATE and Scheduled it.
    -----I didnt receive any records in my PSA
    10. performed DTP.
    ---- I didnt received any new records in my DSO as my delta run is not working..
    PS: I am using WO DSO
    Please correct me if i am wrong anywhere
    Thanks in advance
    Karthik

  • Extraction from SAP ECC to SAP BI

    What are the steps for Extraction from SAP ECC to SAP BI? Thanks.

    Hi,
    we have two types of extractions 1) Application specific 2)cross application
    under applicatin specific -->we have customer genenrated and business content extractions
    under customer generated means LIS, CO-PA, FI-SL(i.e no ready made data source in business content so we have to generate datasource)
    Business content means there is ready made business content datasource so we can use it
    LIS,LO --> when ever we go for extracting logistics informatin
    LO steps
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    LO Cockpit (Use transaction LBWE)
    /people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
    /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
    To understand LO extraction go through these weblogs by Roberto
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    under cross Applicaion
    Generic extraction-->table, view, infoset query, function module
    Generic extractors are of 3 types:
    1. Based on table/view
    2. Based on Infoset Query
    3. Based on Function module
    GenericSteps
    Log on sap R/3.
    Step 1. create a table or view for generic extraction in se11.
    Step 2. Goto  t-code RSO2
    Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
    Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
    Step 5. select create button,this will take u to another screen.
    Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
    Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
    Step 8. then U have to Table name or view name which u have created in se11.
    Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
    Step 10. in next screen u have to give some field which is primary key.
    step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
    step 12. then u have to specify  whether new status for changed records or additive delta.
            If u choose additive delta ,then u have to load data to infocube or ods object.
            If u choose new status for changed records, then u to load data  to ods object only.
    Step 13. then save it.
    Step 14. then logon to sap bw ,then replicate the data source then as usuall.
    COPA
    CO-PA--> for financial info
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
    You can browse forum for more detailed info..
    Regards,
    B

  • "An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX

    Hi all,
    While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
    Only a particular Idoc type is having this issue.
    Below are the checks done before posting this query:
    1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
    2. Reloaded the meta data in PI for  the particular Idoc type in issue.
    3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
    4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
    5. Restarted the inboundRA service in PI AEX.
    Is there anything still missing. What could be root cause of this issue.
    If anyone has encountered it before, pleases share the resolution.
    Thank you
    Younus

    Hi Amit,
    Thanks for the reply. Log viewer doesn't provide much help on the error.
    The error desc says
    "JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
    regards,
    Younus

  • Connect one SAP ECC 6.0 source system to 2 SAP BW system

    Hi!
    I copied SAP BW system (e.g. BW1 --> BW2).
    My source SAP BW system "BW1" was connected to SAP source system "MM5" (tcode RSA1).
    Now I would like to connect my new SAP BW system "BW2" also to this SAP source system "MM5".
    When I do so I get the following error:
    Connection cannot be used.
    Connection BA is used in the MM5:400
    source system as a connection BW1CLNT001 to BW
    Do you want to delete this connection in the source system?
    Question:
    Can one SAP ECC system be connected to 2 SAP BW system?
    If yes, what are the steps to do this?
    Thank you!

    Thank you very much!
    The question still is how to proceed with the following dialog screen/warning?
    Connection cannot be used.
    Connection BA is used in the MM5:400
    source system as a connection BW1CLNT001 to BW
    Do you want to delete this connection in the source system?
    YES or NO
    Thank you!

  • SAP ECC, SRM and SNC integraton

    Hi everyone,
    I want to know if we can integrate ECC, SRM and SNC. We don't want to use SUS, we want to use SNC. Is it possible to have this implementation? If yes, what is the correct technical scenario for SRM (Classic or Extended Classic)?
    Thanks,
    Ivá

    Hello Iván,
    Regarding your first query, "What kind of changes we can do in SNC " --> As a vendor we can modify the PO quantity and PO delivery date only and update the same as POR. We cannot add any items in the PO.
    Regarding your next query ," changes cannot be send to PO if we are in extended classic?"  --> i think we can send the changes to the SNC even in the extended classic scenario , but we need to then customize our system accordingly with regards to the document types used , vendor classification , idoc and xml mapping , etc.
    We will be using some sort of SRM - SUS integration here in the extended classic.
    Also changes can be synched between SRM - ERP - SNC. and we can have the extended classic with ASN creation in SNC.
    Best Regards,
    Rahul

  • SAP EarlyWatch Alert in SAP ECC and SAP PI

    Hi Experts,
    Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
    Example as below:
    Initial System
    Initial Action
    Total Resp. Time in s
    % of RFC Load
    Avg. Response Time
    Avg. CPU Time
    Avg. DB Time
    Avg. Roll Wait Time
    PI
    SAPMHTTP
    200.261
    15,00
    600,3
    70,4
    165,4
    1,5
    The total response time in SAP ECC by PI system is 200261 secs.
    I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
    Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
    Thanks in Advance.

    Hello Pascal,
    No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
    This is because of the fact that the checks for both these system types are different.
    Regards
    Amit

  • Can I retrofit from SAP ECC to SAP R/3

    My understanding was yes. However how do I set this up in SMSY? My system is coming in as an R/3 Enterprise system. However when I select the system role for post processing only my SAP ECC systems show up in the drop-down.
    How do I include my SAP R/3 system:clients in the SAP ECC drop down?

    Hmmm, it can be done both the ways. What system you need to keep it eventually?.
    Form your point, Your ECC system is defined right?.
    If thats that case, goto Txn SMSY-><your SID>-> Header Data-> Installed prodiuct version->from the free selections select SAP R/3->and the related compoent-(I Guess ECC server). This actually creates by itself an duplicate in R/3. but you have to un-check the leading product role box. (You can have the desired system- by cleaning up the inconsistencies).
    The vice versa in the other case.
    Does this sound OK. I know, its bit confusing all over, Please try it for a test/Sandbox SID first, to get that on place.
    Thanks,
    Jagan

  • Sending IDOC from SAP ECC to SAP MII

    Hello,
    Issue while configuring.
    I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got  error as timeout during allocate of registered program and I have attached the screenshot of the error page.
    I would request a reply asap.
    Thanks,
    Praveen

    Hi Praveen,
    First, I would suggest that you identify what version, and SP, of MII and ECC.  Also the NW version and SP if applicable.
    Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59.  There are many discussions on IDoc Listeners going back a number of years.  Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well.  I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener?  If not, you should review your configuration and setup procedure against it.
    I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1.  So the document is still applicable.
    Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID.  Deleting it in one place, generally does not work.  Use it in one place only.  Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance.  Save yourself a lot of headaches.  Never, ever reuse ProgIDs!!!
    Fourth, most of the other issues involve a PI/XI system in the middle.  Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI.  Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved.  Sometimes a CSS ticket is required.
    Regards, Mike
    SAP P&I Technology RIG

  • SAP ECC 6.0 file system Restore

    Dear Friends,
    Happy Holi.
    I have restore file system backup of our development server to another host having oracle 10g and ECC 6.0.
    After restore database has been up successfully.
    But listner is not running when I trid to run listner it is giving the error as below.
    jkeccbc:oradvr 2> lsnrctl start
    LSNRCTL for HPUX: Version 10.2.0.2.0 - Production on 19-MAR-2011 15:18:33
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Starting /oracle/DVR/102_64/bin/tnslsnr: please wait...
    TNSLSNR for HPUX: Version 10.2.0.2.0 - Production
    System parameter file is /oracle/DVR/102_64/network/admin/listener.ora
    Log messages written to /oracle/DVR/102_64/network/log/listener.log
    Error listening on: (ADDRESS=(PROTOCOL=IPC)(KEY=DVR.WORLD))
    TNS-12557: TNS:protocol adapter not loadable
    TNS-12560: TNS:protocol adapter error
      TNS-00527: Protocol Adapter not loadable
    Listener failed to start. See the error message(s) above...
    Regards
    Ganesh Datt Tiwari

    Hi Mark,
    Please find below
    cat listener.ora
    Filename......: listener.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = DVR.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
             (KEY = DVR)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST =jkeccbc)
              (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = DVR)
          (ORACLE_HOME = /oracle/DVR/102_64)
    ===========================================
    cat tnsnames.ora
    Filename......: tnsnames.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
    DVR.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = jkeccbc)
              (PORT = 1527)
        (CONNECT_DATA =
           (SID = DVR)
           (GLOBAL_NAME = DVR.WORLD)
    Regards
    Ganesh Datt Tiwari

  • Replication of Sales Order from SAP ECC to SAP CRM

    Hi,
    The scenario I am working on is breifly as under:
    Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
    1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
    2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
    3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
    Regards,
    Rajesh

    1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
    2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
    3. Should reprsent not problem, but pricing procedures must be synchronized between both systems.

  • Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

    Hello all
    Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
    An extractor
    All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
    Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
    Regards
    Gajendra

    After further digging, here is some information that I found out.
    T-code
    Program
    BADI
    MSEX
    RMDMRPEXTRACT02
    MD_SR_LIST_EXTRACT
    This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
    Here are some tables, just for reference:
    LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
    MRP Records:
    MDKP
    MRP Document Header Data
    MDTB
    MRP Table Structure (no data)
    PLSC
    Planning Scenario (Long-term Planning)
    MDFD
    MRP Firming Dates
    MDVM
    Planning File Entries
    S094
    LIS -- Stock/Requirements Analysis

  • SAP ECC 6.0 System Performance

    Gentlemen,
    Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
    My system configuration is:      SAP ECC 6.0
    Database System:          Oracle 10.2.0.2.0.
    Server Configuration:     Power 6
    Processor Type: PowerPC_POWER6
    Processor Implementation Mode: POWER 6
    Processor Version: PV_6_Compat
    Number Of Processors: 6
    Processor Clock Speed: 3503 MHz
    CPU Type: 64-bit
    Kernel Type: 64-bit
    LPAR Info: 2 PRODUCTION
    Memory Size: 47104 MB
    Good Memory Size: 47104 MB
    Platform Firmware level: EL340_039
    Firmware Version: IBM,EL340_039
    The following Information was generated from TCode: sm51:
    SAP Release Information
    Application Server SAPPRD_PRD_00
    SAP Kernel Information
    SAP Kernel :  700_REL
    Database Client Library : OCI_101
    created in  :  AIX 2 5 005DD9CD4C00
    Support Level  :  0
    Kernel Patch number : 202
    Source ID  :  0.202
    DBSL Patch No. : 046
    ICU Version : 3.0 Unicode Version 4.0.1
    libsapu16 Version : 1.0025  Apr  8 2009 16:21:08
    Supported Environment
    SAP Database Version
    700
    Database
    ORACLE 9.2.0..
    ORACLE 10.1.0..
    ORACLE 10.2.0..
    Operating System
    aix 1 5
    aix 2 5
    aix 3 5
    aix 1 6
    My active parameter in Tcode : RZ10 as follow:
    Parameter Name     Parameter value
    login/accept_sso2_ticket     1
    login/create_sso2_ticket     2
    rsau/enable     1
    login/failed_user_auto_unlock     0
    login/fails_to_user_lock     5
    gw/max_sys     2000
    gw/max_overflow_size     25000000
    rdisp/max_comm_entries     2000
    rdisp/tm_max_no     2000
    gw/max_conn     2000
    rdisp/max_arq     2000
    ES/SHM_SEG_COUNT     8192
    ES/SHM_USER_COUNT     8192
    ES/SHM_SEG_SIZE     2048
    ES/TABLE     SHM_SEGS
    ztta/short_area     4000000
    em/global_area_MB     256
    zcsa/db_max_buftab     10000
    sap/bufdir_entries     10000
    enque/table_size     60000
    rsdb/obj/large_object_size     35000
    rsdb/obj/max_objects     45000
    rsdb/obj/buffersize     150000
    rdisp/gui_auto_logout     0
    login/password_expiration_time     0
    rdisp/max_wprun_time     25000
    login/multi_login_users     CICUSER,TALSAYED,ASALAM
    login/disable_multi_gui_login     1
    SAPSYSTEMNAME     PRD
    SAPSYSTEM     0
    INSTANCE_NAME     DVEBMGS00
    DIR_CT_RUN     $(DIR_EXE_ROOT)/run
    DIR_EXECUTABLE     $(DIR_INSTANCE)/exe
    PHYS_MEMSIZE     8000
    exe/saposcol     $(DIR_CT_RUN)/saposcol
    rdisp/wp_no_dia     70
    rdisp/wp_no_btc     20
    exe/icmbnd     $(DIR_CT_RUN)/icmbnd
    icm/server_port_0     PROT=HTTP,PORT=80$$
    ms/server_port_0     PROT=HTTP,PORT=81$$
    rdisp/wp_no_enq     1
    rdisp/wp_no_vb     2
    rdisp/wp_no_vb2     2
    rdisp/wp_no_spo     10
    abap/buffersize     9900000
    zcsa/table_buffer_area     108003328
    rtbb/buffer_length     60000
    rsdb/cua/buffersize     24000
    zcsa/presentation_buffer_area     28166144
    rdisp/appc_ca_blk_no     2000
    rdisp/wp_ca_blk_no     1000
    rsdb/ntab/entrycount     68500
    rsdb/ntab/ftabsize     100000
    rsdb/ntab/irbdsize     20000
    rsdb/ntab/sntabsize     3995
    DIR_ROLL     /usr/sap/PRD/DVEBMGS00/data
    DIR_PAGING     /usr/sap/PRD/DVEBMGS00/data
    DIR_DATA     /usr/sap/PRD/DVEBMGS00/data
    DIR_REORG     /usr/sap/PRD/DVEBMGS00/data
    DIR_TRANS     /usr/sap/trans
    DIR_TEMP     /tmp
    DIR_SORTTMP     /usr/sap/PRD/DVEBMGS00/data
    zcsa/system_language     E
    zcsa/installed_languages     AE
    abap/use_paging     0
    ztta/roll_first     1024
    rdisp/keepalive_timeout     8000
    ztta/roll_area     9000960
    rdisp/ROLL_SHM     16384
    rdisp/ROLL_MAXFS     32768
    rdisp/PG_SHM     16384
    rdisp/PG_MAXFS     200064
    abap/heap_area_dia     2012217344
    abap/heap_area_nondia     2012217344
    abap/heap_area_total     2012217344
    abap/heaplimit     40894464
    abap/swap_reserve     20971520
    ztta/roll_extension     2101346304
    em/initial_size_MB     4092
    em/blocksize_KB     4096
    em/stat_log_size_MB     20
    em/stat_log_timeout     0
    login/no_automatic_user_sapstar     0
    login/system_client     100
    icm/server_port_1     PROT=SMTP,PORT=8025,TIMEOUT=180
    rdisp/start_icman     TRUE
    icm/host_name_full     SAPPRD.tmg.dom
    install/codepage/appl_server     4102
    ipc/shm_psize_10     500000000
    ipc/shm_psize_14     0
    ipc/shm_psize_18     0
    ipc/shm_psize_19     0
    ipc/shm_psize_30     -10
    ipc/shm_psize_40     500000000
    ipc/shm_psize_41     0
    ipc/shm_psize_51     -10
    ipc/shm_psize_52     -10
    ipc/shm_psize_54     -10
    ipc/shm_psize_55     -10
    ipc/shm_psize_57     -10
    ipc/shm_psize_58     -10
    I already generated EWA report and I got the following result:
    1. Performance Overview PRD
    The performance of your system was analyzed with respect to average response times and total workload. We have detected some problems that may impair system performance.
    To ensure adequate performance in your core business transactions, you should take corrective action as soon as possible. For further information, please SAP Support.
    Rating     Check
         Performance Evaluation
    The following table shows the average response times for various task types:
    Task type     Dialog Steps     Avg. Resp. Time in ms     Avg. CPU Time in ms     Avg. Wait Time in ms     Avg. Load Time in ms     Avg. DB Time in ms     Avg. GUI Time in ms
    DIALOG     212990     1595.2     257.7     31.0     5.0     622.2     136.8
    RFC     2904     11876.4     192.1     33.1     1.4     10574.2     0.0
    UPDATE     86257     116.1     28.4     2.1     2.9     58.1     0.0
    UPDATE2     1100     84.6     16.9     1.3     1.4     48.2     0.0
    BATCH     11600     189360.5     46218.1     5.5     3.7     132313.5     0.0
    SPOOL     9989     1686.8     37.1     55.6     0.3     49.2     0.0
    1.1. Current Workload
    The following table lists the number of current users (measured from our workload analysis) in your system.
    Users     Low Activity     Medium Activity     High Activity     Total Users
    Measured in System     162     119     6     287
    1.2. Performance Evaluation
    The measured times are compared against reference times to provide a rating.
    - If the number of dialog steps in an hour is less than 1000 this hour is not considered.
    - If the total number of transaction steps is less than 24000, the rating for the task is not performed and a blue line is entered in the table.
    The table below shows that a performance problem is expected for the task that is rated YELLOW.
    Task     Steps     Application Server Performance     Database Server Performance
    Dia     212987           
    Upd     86257           
    HTTP     0           
    Rating     Task     Time     Steps     Avg. Response Time (ms)     Avg. CPU Time (ms)     Avg. Database Time (ms)
         Dia     08-09     3726     1343     137     889
         Dia     09-10     19990     1003     174     620
         Dia     10-11     20603     1747     112     630
         Dia     11-12     27934     2437     239     612
         Dia     12-13     18921     2737     235     858
         Dia     13-14     21579     2163     349     549
         Dia     16-17     22529     1134     230     703
         Dia     17-18     12189     1709     561     991
         Dia     19-20     5840     1550     414     967
         Dia     20-21     4951     1294     176     454
    The ratings in the table above are determined by comparisons against the reference table below.
    If the dialog response times are very poor, it will cause a RED rating for the entire check.
    Task     Reference for Avg. Response Time (ms)     Reference for Avg. DB time (ms)
    Dia     1200     600
    Upd     2400     1200
    HTTP     1200     600
    1.3. Transaction Profile Check
    The following tables show the response times and the number of dialog steps for the transactions that cause the highest workload in your system. NOTE: A business transaction normally consists of more than one dialog step. As a rough estimate, the actual number of business transactions that are executed in your system is approximately one third of the total dialog steps shown. (Transaction CPIC/RFC is not taken into account.)
    1.3.1. Transactions by Total Workload
    The following tables list the activities with the highest contribution to the total workload.
    WORKLOAD BY TRANSACTION (DIALOG/UPDATE)
    Transaction     Type     Dialog Steps     Total Resp. Time in %     Avg. Resp. Time in ms     Avg. CPU Time in ms     Avg. DB Time in ms     Avg. GUI Time in ms
    Total          299247     100.0     1168.9     191.7     459.6     136.8
    ZFIBB     DIA     8592     11.1     4522.4     2258.5     633.4     30.1
    ZFIRP     DIA     6641     7.3     3858.0     1089.7     1162.6     50.0
    RECN     DIA     11644     6.8     2047.9     129.1     1165.8     202.6
    SESSION_MANAGER     DIA     8972     5.7     2226.9     80.2     244.2     458.2
    ZFICCR     DIA     4834     5.2     3775.9     138.4     2535.9     195.6
    ZRECPD     DIA     8895     4.6     1790.1     85.9     525.3     329.4
    FBL3N     DIA     10414     4.1     1386.7     109.3     971.8     49.1
    ZFIOBC2     DIA     852     3.4     13909.2     2675.7     9302.3     1028.7
    ZREOR     DIA     2241     3.3     5216.1     2246.2     808.1     357.5
    ZFIOB     DIA     1176     3.2     9503.7     51.3     8287.0     753.4
    38.1% of the "Total Resp. Time" in the above table is caused by customer transactions.
    WORKLOAD BY TRANSACTION (BATCH/SPOOL)
    Transaction     Type     Dialog Steps     Total Resp. Time in %     Avg. Resp. Time in ms     Avg. CPU Time in ms     Avg. DB Time in ms
    Total          21492     100.0     102913.8     24939.7     71399.3
    SBIE0001     BTC     36     98.7     60613763.4     14848709.4     42408448.0
    ZFIPR     SPO     448     0.2     7939.6     169.9     387.1
    (BATCH)     BTC     7368     0.2     478.4     7.5     22.2
    ZFIADCA     SPO     486     0.1     5733.7     168.6     177.9
    RSAL_BATCH_TOOL_DISPATCHING     BTC     96     0.1     23895.0     1964.7     21770.3
    ZFIJV     SPO     309     0.1     6092.5     107.7     89.5
    SAPRSLOG     BTC     4     0.1     318475.8     69165.0     257824.5
    ZRE_GENERATE_COND_RO     BTC     5     0.1     250075.0     3336.0     237287.8
    ZRE_AUTO_REJECT_OFFER     BTC     20     0.1     57062.0     339.0     54977.8
    ZRE_TRANSFER_TOCONT_UPL     BTC     346     0.0     3161.3     941.6     2327.7
    0.6% of the "Total Resp. Time" in the above table is caused by customer transactions.
    According to our analysis, the main system load is caused by background jobs.
    The EarlyWatch Alert Service can only detect performance problems for dialog, update and RFC response times. This service does not evaluate performance problems for background jobs.
    1.3.2. Transactions by DB Load
    The following transaction profiles list the transactions that have the greatest share in the database load, sorted by percentage of total database access times.
    DATABASE LOAD BY TRANSACTIONS (DIALOG/UPDATE)
    Transaction     Type     Dialog Steps     Total DB Time in %     Avg. DB Time in ms
    Total          299247     100.0     459.6
    RECN     DIA     11644     9.9     1165.8
    ZFICCR     DIA     4834     8.9     2535.9
    FBL3N     DIA     10414     7.4     971.8
    ZFIOB     DIA     1176     7.1     8287.0
    ZRECCR     DIA     1504     7.0     6368.3
    ZFIOBC2     DIA     852     5.8     9302.3
    ZFIRP     DIA     6641     5.6     1162.6
    ZFIBB     DIA     8592     4.0     633.4
    ZFIREMTCH     DIA     73     3.5     66443.6
    ZRECPD     DIA     8895     3.4     525.3
    45.3% of the "Total DB Time" in the above table is caused by customer transactions.
    DATABASE LOAD BY TRANSACTIONS (BATCH/SPOOL)
    Transaction     Type     Dialog Steps     Total DB Time in %     Avg. DB Time in ms
    Total          21492     100.0     71399.3
    SBIE0001     BTC     36     99.5     42408448.0
    RSAL_BATCH_TOOL_DISPATCHING     BTC     96     0.1     21770.3
    ZRE_GENERATE_COND_RO     BTC     5     0.1     237287.8
    ZRE_AUTO_REJECT_OFFER     BTC     20     0.1     54977.8
    SAPRSLOG     BTC     4     0.1     257824.5
    ZRE_TRANSFER_TOCONT_UPL     BTC     346     0.1     2327.7
    RSPO1043     BTC     4     0.0     143273.5
    ZFIPR     SPO     448     0.0     387.1
    (BATCH)     BTC     7368     0.0     22.2
    ZFIADCA     SPO     486     0.0     177.9
    0.3% of the "Total DB Time" in the above table is caused by customer transactions.
    Please advice.
    Regards,
    Ahmed

    Gentlemen,
    Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
    My system configuration is:
    SAP ECC 6.0 , Oracle 10.2.0.2.0 , Kernel Patch number : 202 , DBSL Patch No. : 046
    Server Configuration:
    Power 6 , Processor Type: PowerPC_POWER6 , Processor Implementation Mode: POWER 6 , Processor Version: PV_6_Compat , Number Of Processors: 6 , Processor Clock Speed: 3503 MHz , CPU Type: 64-bit , Kernel Type: 64-bit , LPAR Info: 2 PRODUCTION , Memory Size: 47104 MB , Good Memory Size: 47104 MB , Platform Firmware level: EL340_039 , Firmware Version: IBM,EL340_039
    My active parameter in Tcode : RZ10 as follow:
    Parameter Name     Parameter value
    rsau/enable                     1
    login/failed_user_auto_unlock     0
    login/fails_to_user_lock     5
    gw/max_sys                     2000
    gw/max_overflow_size     25000000
    rdisp/max_comm_entries     2000
    rdisp/tm_max_no                     2000
    gw/max_conn                     2000
    rdisp/max_arq                        2000
    ES/SHM_SEG_COUNT     8192
    ES/SHM_USER_COUNT     8192
    ES/SHM_SEG_SIZE                     2048
    ES/TABLE     SHM_SEGS
    ztta/short_area                     4000000
    em/global_area_MB                     256
    zcsa/db_max_buftab                     10000
    sap/bufdir_entries                     10000
    enque/table_size                     60000
    rsdb/obj/large_object_size     35000
    rsdb/obj/max_objects                     45000
    rsdb/obj/buffersize                     150000
    rdisp/max_wprun_time     25000
    DIR_CT_RUN                     $(DIR_EXE_ROOT)/run
    DIR_EXECUTABLE                  $(DIR_INSTANCE)/exe
    PHYS_MEMSIZE                   8000
    exe/saposco                        $(DIR_CT_RUN)/saposcol
    rdisp/wp_no_dia                         70
    rdisp/wp_no_btc                  20
    exe/icmbnd                        $(DIR_CT_RUN)/icmbnd
    rdisp/wp_no_enq                1
    rdisp/wp_no_vb                      2
    rdisp/wp_no_vb2              2
    rdisp/wp_no_spo                10
    abap/buffersize                      9900000
    zcsa/table_buffer_area     108003328
    rtbb/buffer_length                    60000
    rsdb/cua/buffersize              24000
    zcsa/presentation_buffer_area     28166144
    rdisp/appc_ca_blk_no                     2000
    rdisp/wp_ca_blk_no               1000
    rsdb/ntab/entrycount               68500
    rsdb/ntab/ftabsize              100000
    rsdb/ntab/irbdsize             20000
    rsdb/ntab/sntabsize              3995
    abap/use_paging                    0
    ztta/roll_first                      1024
    rdisp/keepalive_timeout                   8000
    ztta/roll_area                        9000960
    rdisp/ROLL_SHM                   16384
    rdisp/ROLL_MAXFS                 32768
    rdisp/PG_SHM                16384
    rdisp/PG_MAXFS                 200064
    abap/heap_area_dia             2012217344
    abap/heap_area_nondia     2012217344
    abap/heap_area_total      2012217344
    abap/heaplimit                40894464
    abap/swap_reserve                  20971520
    ztta/roll_extension                  2101346304
    em/initial_size_MB              4092
    em/blocksize_KB                  4096
    em/stat_log_size_MB                     20
    em/stat_log_timeout                       0
    install/codepage/appl_server     4102
    ipc/shm_psize_10               500000000
    ipc/shm_psize_14              0
    ipc/shm_psize_18             0
    ipc/shm_psize_19             0
    ipc/shm_psize_30             -10
    ipc/shm_psize_40            500000000
    ipc/shm_psize_41                 0
    ipc/shm_psize_51               -10
    ipc/shm_psize_52            -10
    ipc/shm_psize_54             -10
    ipc/shm_psize_55             -10
    ipc/shm_psize_57             -10
    ipc/shm_psize_58                   -10
    I already generated EWA report and I got the following result:
    Performance Evaluation
    The following table shows the average response times for various task types:
    Task type     Dialog      Avg. Resp.      Avg. CPU      Avg. Wait      Avg. Load      Avg. DB      Avg. GUI
    DIALOG     212990     1595.2                      257.7     31.0     5.0     622.2     136.8
    RFC     2904     11876.4                      192.1     33.1     1.4     10574.2     0.0
    UPDATE     86257     116.1                       28.4     2.1     2.9     58.1     0.0
    UPDATE2     1100     84.6                      16.9     1.3     1.4     48.2     0.0
    BATCH     11600     189360.5                46218.1     5.5     3.7     132313.5     0.0
    SPOOL     9989     1686.8              37.1     55.6     0.3     49.2     0.0
    1.1. Current Workload
    The following table lists the number of current users (measured from our workload analysis) in your system.
    Low Activity     Medium Activity     High Activity     Total Users
    162                  119                                    6     287
    1.2. Performance Evaluation
    Task     Time     Steps     Avg. Response      Avg. CPU      Avg. Database
    Dia     08-09     3726     1343              137     889
    Dia     09-10     19990     1003                174     620
    Dia     10-11     20603     1747              112     630
    Dia     11-12     27934     2437                    239     612
    Dia     12-13     18921     2737              235     858
    Dia     13-14     21579     2163                  349     549
    Dia     16-17     22529     1134               230     703
    Dia     17-18     12189     1709                   561     991
    Dia     19-20     5840     1550              414     967
    Dia     20-21     4951     1294              176     454
    Task     Reference for Avg. Response Time (ms)     Reference for Avg. DB time (ms)
    Dia     1200                                                     600
    Upd     2400                                               1200
    HTTP     1200                                                  600
    Please advice.
    Regards,
    Ahmed

Maybe you are looking for

  • How do I select multiple calendars?

    Somehow iCal has given me multiple -- as in hundreds -- of "untitled" calendars (a sync issue?). I want to select and delete a whole bunch of them at once. Otherewise it's a painfully slow process of selecting and deleting one at a time. Any ideas ho

  • Web Services connection to MS Exchange Server 2007

    Hi everyone, I try to use the web services of MS Exchange Server 2007 within ABAP. I found the he WSDL file under https://<dns name of exchange server>/EWS/Services.wsdl. I already tried to create the proxy object under SE80 -> create web service ->

  • Logic Express 8 License - 2 computers?

    Is that possible to install the Logic Express in two iMac, one at home and one at the oficce? Two iMacs instead of one desktop and one laptop. I tried to find the terms a conditions of the license but any success...

  • I can't register my visa to Itunes.

    I can't register my visa to Itunes. when i try, a red text appear wich says "The card cannot be used. please put in valid card information" even tho everything is put in exactly like it should be. What should i do?

  • To re-send a fax

    Hello there, I am trying to re-send a fax but when going into MR90 the document number is not there. Can you please help on this? Thanks a lot