SAP ECC to the SAP SNC

Hi Experts,
I have a scenario like SAP ECC TO THE SAP SNC (ASYNC). IN THE SXMB_MONI IT IS SHOWING BLACK FLAG AND IN THE OUTBOUND STATUS IT WAS NOT SHOWING ANY FLAG.
AND ALSO IN ACK STATUS IT WAS SHOWING LIKE ( @8Q\QStill awaiting acknowledgment @) THERE WAS NOT ERROR MESSAGE ALSO .
PLEASE HELP ME TO RESOLVE THIS .

Hi,
> I have a scenario like SAP ECC TO THE SAP SNC (ASYNC). IN THE SXMB_MONI IT IS SHOWING BLACK FLAG AND IN THE OUTBOUND STATUS IT WAS NOT SHOWING ANY FLAG.
For BPM Scenarios it shows the flag in Outbound status but for notmal scenarios it doesn't show.
> AND ALSO IN ACK STATUS IT WAS SHOWING LIKE ( @8Q\QStill awaiting acknowledgment @) THERE WAS NOT ERROR MESSAGE ALSO .
I think it is for Idoc scenario. By default Idoc scenario expects the acknowledgement from receiver (once idoc sends from sender it expects ack message from receiver), if you don't want acks then you have to do below settings.
Go to SE38--> execute "IDX_NOALE" report --> provide sender port and client --> Then you will get some options, here you will select Do not request Acknowledgements.
Regards,
Venkata Ramesh

Similar Messages

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

How SAP ECC interface with SAP SRM

Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
Maria

Dear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query:
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Data load into SAP ECC from Non SAP system

Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
Monil

Hi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu

SAP Netweaver Mobile 7.1 on SAP ECC 6 or SAP Netweaver 7.02

Dear,
Just want to make sure of these :
1. Is it true that SAP Netweaver Mobile 7.1 only available for SAP Netweaver 7.x ?
2. Is it true that I will never be able to have SAP Netweaver Mobile 7.1 on my current SAP ECC 6 EHP 5 (SAP Netweaver AS 7.02) ?
3. If no. 2 is true, it means I must purchase new license in order to have SAP Netweaver Mobile 7.1. Is it true ?
4. If no. 3 is true, it means I must maintain 2 instance of SAP Netweaver AS, SAP Netweaver AS 7.02 for my ECC 6 and SAP Netweaver AS 7.3 for my SAP Netweaver Mobile 7.1. Is it true ?
Thanx Guys,

Hello,
SAP Netweaver Mobile 7.1 on my current SAP ECC 6 EHP 5 (SAP Netweaver AS 7.02)
This is not possible
you Need to have a separate MI 7.1 box ,which connects to the SAP ECC 6 EHP5 backend.
regards
kaushik

SAP ECC- EHP7 functionalities SAP PS

H Friends,
Please let me know the EHP 7 functionality for SAP Project System. As my company is planning to upgrade from EHP 6 to EHP 7.
Thanks
Yogendra Soni

Hi Yogendra,
I googled your case and found some threads/links. Not sure whether it will help you or not.
New changes for PS in EHP7
SAP ERP 6.0 – SAP Help Portal Page
Anyways, please wait for other experts/moderators to comment on this.
Regards,
Amit Rajoria

Could u please answer my question for filling the setup tables in SAP ECC purchasing the following error encountered..

Enter rate / USD rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction

Hi karim,
While posting thread here, please use proper headline instead of general sentence.
Issue: seems like some exchange rates issue at ecc side.
Seek your FI or functional team to maintain proper USD exchange rates/rate type For M.
Later you can try to fill set up tables.
Once FI team done exchange rates at ecc side, do transfer global setting to bw side.
Thanks

Integrating sap crm with the sap HR module

Hi,
We replicated HR data(employee and position) from SAP HR to SAP CRM system using ALE/IDOC.
Here I have one question,If I change the position to the employee in CRM system,will changes happen in SAP HR system automatically? or Delta changes will haapen? If yes pl explain.
Using change pointers master data changes flowsfrom SAP HR to SAP CRM .
TIA.
PV.

Hi,
Its better to post this thread in SAP CRM & SAP HR forum. You may get faster & Better replies.
This may also help:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84dd0c97-0901-0010-4ab2-9849fba57e31
Edited by: AJAY TIWARI on Jan 2, 2009 3:56 AM

Integrating SAP CRM with the SAP HR module using ALE/IDOC

Hi,
We replicated HR data(employee and position) from SAP HR to SAP CRM system using ALE/IDOC.
Here I have one question,If I change the position to the employee in CRM system,will changes happen in SAP HR system automatically? or Delta changes will haapen? If yes pl explain.
Using change pointers master data changes flowsfrom SAP HR to SAP CRM .
TIA.
PV.

Hi
To integrate... between those systems
first of all u have to create message type to tose fields with t code bd52.
then activate that massege type in bd50.
and after that one u have to activate chaneg pointers globally with bd61.
if u did these thigns if u made any chnegs to those fileds that witll be reflected in the next system
Regards,
Prasad.

Sending IDOC from SAP ECC to SAP MII

Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
Praveen

Hi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan M

Yes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M

SAP EarlyWatch Alert in SAP ECC and SAP PI

Hi Experts,
Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
Example as below:
Initial System
Initial Action
Total Resp. Time in s
% of RFC Load
Avg. Response Time
Avg. CPU Time
Avg. DB Time
Avg. Roll Wait Time
PI
SAPMHTTP
200.261
15,00
600,3
70,4
165,4
1,5
The total response time in SAP ECC by PI system is 200261 secs.
I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
Thanks in Advance.

Hello Pascal,
No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
This is because of the fact that the checks for both these system types are different.
Regards
Amit

SAP ECC to the SAP SNC

Similar Messages

Maybe you are looking for