SAP ECC Version 6

Dear SAP Experts,
I have never worked on SAP ECC version 6 nor on 5. Could you please give your opinion,your experiences, your tips to the below:
- Leading GAAP for Common Chart of Accounts
- Handling Parallel GAAPs
- Handling Parallel Ledgers
-FICO Real Time Integration.
All in relation to version 6.
Thanks in advance for your time and advise.
Regards
Suresh

Hello Suresh...
Can you please send those documentation to my mail id too.... I was lacking with this real time exposure... If you are having any sort of information regarding real time scenarios please let me receive Suresh...
Thanks in Advance...
[email protected]
Hope someone will surely help me in this regard...
Byee..
Take Care

Similar Messages

Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6

Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
Yogesh

Dear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen.

What's new in SAP ECC version(Technically)

Hi ALL,
iam and ABAPer new to SAP ECC version.
can u post me th document related to SAP ECC version (what are the technical changes in ECC& Syntax change in ECC)
thank u

Hi,
Welcome to SDN!
In SE38, click the blue icon (Information) with the "I" in it.
Click "New Features in ABAP".
There should be a subfolder there which says "ABAP Changes by Release".
There is also a very good document from Thomas Jung here in the SDN
that contain a lot of hardcopies of the changes.
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Also, check the following threads:
Re: ABAP Changes for release ECC 5.0
Re: Technical difference between 4.7 and ECC 5.0
best regards,
Thangesh

SAP ECC 6.0 retail

Hello
I am trying to find how to install SAP ECC 6.0 retail
I am quite confused. . On one hand I can see there is note for IDES (1028572 - IDES ERP 2005 ECC 6.0 SR2 for Retail
Industry) on the other SAP Note 1242830 - SAP Best Practices for Retail US V1.603
Is this the same product (leaving apart IDES has an company data).
People on forum are discussing about an switch "transaction sfw5" some also mention an switch in IMG which I do not find
I am quite confused. On ECC system I have EA-RETAIL but then why "SAP Best Practices for Retail "
Could someone help me in regards to "retail"?
Thank you a lot

The switch is not the way to do it anymore in the most recent SAP ECC versions:
- Retail Switch (up to release mySAP ERP2004)
- the business functions set for SAP Retail [ISR_RETAIL] (since release SAP ERP 6.0) via trx. SWF5
Seeing the date of your post, the last option will probably be the appropriate one.

Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
Jochen

SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy

Call Transaction XK02 in SAP ECC 6.0 Version

Hi All,
I am working with an object which calls a transaction XK02 to modify the name and contact details fields in Version SAP ECC 6.0.
The problem is that, when the transaction is run manually and saved or when an SHDB Recording is created, the data is getting updated.
But when the transaction is called from a program or when the SHDB Recording which is already created is run, the data is not getting updated in Version SAP ECC 6.0.
The data is getting updated properly when it is done in Version SAP 4.6b.
Central Address Management System is used here.
The call transaction statement is running smoothly. The SY-SUBRC is 0 for this.
The thing is, there is a Check Box at the end of the screen called 'Use Central Address Management' when the SHDB is created.
If this is checked, the contact details are stored in ADRC and LFA1 tables and only in LFA1 if not checked.
In the new version SAP ECC 6.0, the data should also get populated in the ADRC table.
There is a slight change in the logic in SAP ECC 6.0 version.
Can anybody please help me in this regard?
Thanks & Regards,
Vaitheeswaran.

Hi Prabhu,
The call transaction statement is running smoothly. The SY-SUBRC is 0 for this.
The thing is, there is a Check Box at the end of the screen called 'Use Central Address Management' when the SHDB is created.
If this is checked, the contact details are stored in ADRC and LFA1 tables and only in LFA1 if not checked.
In the new version SAP ECC 6.0, the data should also get populated in the ADRC table.
There is a slight change in the logic in SAP ECC 6.0 version.
Thanks & Regards,
Vaitheeswaran.

Euro exchange rate in sap 6.00 ecc version

dear all,
We are recently implementing sap in our company.we are following sap 6.00 ecc version. we have taken E.rate types B for selling , G for buying , M for average.
But for EURO it is asking for type EURX only.but I want to define buying and selling rates for EURO also.can anybody tell how to define buying and selling for EURO also.

Hi,
nevertheless you will always do the postings in M. If you want to post to use G or B you have to put in the rate type manually. That means you can maintain the KNVV-KURST manually with another course type.
to your problem. It is also possible to use the EURX. And in special cases like KNVV-KURST you can choose the exchange rate G or B manually. The document in this case will be posted later with G or B. KNVV is only an example
Please check. But it should work.
Best regards
Volker

FF6A transaction missing in menu in SAP ECC 6.0 version

Hi,
In SAP ECC 6.0 version, the FF6A transaction has disappeared in the SAP menu, but it works if we execute directly.
Is an error and exists a note to solve it or is a normal work?.
Thak you,
David.

Hi David,
I just checked menu on one of Customer I have access to, also running version 6.0, and this transaction is included in the SAP menu list.
to be honest, I don't know whether it is the error or not, however I would you suggest to verify, if you can find this transaction by technical name in the full SAP menu. Otherwise, create OSS message for SAP.
Best regards,
Renatas

Regarding XK02 transaction in SAP ECC 6.0 Version

Hi All,
I am working with an object which calls a transaction <b>XK02</b> to modify the name and contact details fields in Version <b>SAP ECC 6.0</b>.
The problem is that, when the transaction is run manually and saved or when an SHDB Recording is created, the data is getting updated.
But when the transaction is called from a program or when the SHDB Recording which is already created is run, the data is not getting updated in Version SAP ECC 6.0.
The data is getting updated properly when it is done in Version SAP 4.6b.
Central Address Management System is used here.
Can anybody please help me in this regard?
Thanks & Regards,
Vaitheeswaran.

Hi Prabhu,
The call transaction statement is running smoothly. The SY-SUBRC is 0 for this.
The thing is, there is a Check Box at the end of the screen called 'Use Central Address Management' when the SHDB is created.
If this is checked, the contact details are stored in ADRC and LFA1 tables and only in LFA1 if not checked.
In the new version SAP ECC 6.0, the data should also get populated in the ADRC table.
There is a slight change in the logic in SAP ECC 6.0 version.
Thanks & Regards,
Vaitheeswaran.

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

Reg: Replacing i-way with PI for SAP ECC 6.0 version

Hello Experts
currently we are using R/3 4.7 version and middle ware we are using is i-way and we are planning to upgrade to ECC 6.0 and i would like to know how compatible is i-way is with SAP ECC 6.0 and is there any neccessity to replace the same with PI.
and currently we are using RFC as a method of communication between R/3 and i-way and in future i don't want to change the existing coding , is it feasible to use PI via RFC.
As i am ABAPer, i am new to this PI and please let me the know the risks involved and it is viability.
Thanks and Regards
S.Janagar

Hi Gavin,
you should always use the SQL EE for SAP installations (because of additional features that only come with EE).
Concerning SQL 9 or SQL 10, I would definitely go for SQL 10. It has some nice features like Backup Compression, Page/Row Compression and so on. Have a look [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a236a2-8104-2b10-5ebe-8fef61cc82fd]. Just make sure that your installation meets the SR3 requirements.
We already have SQL 10 in production and did not encounter any problems.
Regards,
Sven

What MS SQL version for SAP ECC 6.0?

Hi,
we are preparing ourselves to move away from SAP R/3 & MS SQL 2000 to SAP ECC 6.0 and a new SQL platform.
From what I found, it runs on SAP_BASIS 7.0 - so both SQL 2005 and SQL 2008 are supported.
I was wondering, however, what SQL version do I need - would SAP ECC 6.0 run on Standard or does it require Enterprise Edition of SQL server?
Many thanks
Gavin
Edited by: Gavin Clark on Sep 9, 2008 5:07 PM

Hi Gavin,
you should always use the SQL EE for SAP installations (because of additional features that only come with EE).
Concerning SQL 9 or SQL 10, I would definitely go for SQL 10. It has some nice features like Backup Compression, Page/Row Compression and so on. Have a look [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a236a2-8104-2b10-5ebe-8fef61cc82fd]. Just make sure that your installation meets the SR3 requirements.
We already have SQL 10 in production and did not encounter any problems.
Regards,
Sven

Linux version for SAP ECC 6.0

Dear all,
Please help me in finding the suitable Linux version for SAP ECC 6.0 version.
Thanks & Regards
Tavargeri Ganesh

SAP on Linux
--> Supported platforms
Markus

What is the difference in 4.0, 4.6 and ECC versions of SAP?

Hi
What is the difference in 4.0, 4.6 and ECC versions of SAP?
Thanks

SAP R/3 is basic ERP that every one keeps talking about which has got different versions ike 3.1, 4.0, 4.6, 4.7. The latest one in this is the ECC which again has got two versions in the market - ECC 5.0 and ECC 6.0.
NetWeaver is the techology stack which gives other solutions that work with R/3 and also provide a technology platform for the ERP to work.
EP - Enterprise portal is a part of the NetWeaver stack and can be used to provide web interface for the user apart from the standard protal functionalities.
You can find more details of NetWeaver here
http://help.sap.com/content/documentation/netweaver/index.htm
and also check these..
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/frameset.htm

Operating system VERSION incompatability while installing SAP ECC 6.0 SR3

<h3>what is the dump of M.S. SQL SERVER required for installing SAP ECC 6.0 SR3 ABAP system on WINDOWS SERVER 2008 R2 ENTERPRIZE 6.1 VERSION.</h3>
we installed the MS sql version: 10.50.1702 (dump number 51039339) on our Operating system version was Windows Server 2008 R2 enterprise (version 6.1) and while we are trying to install sap using SAP INST we got one high priority prerequisites analysis message saying
<h3> MESAGE "The following operating system versions is supported: windows server 2003(i.e version 5.2) and Windows server 2008(ie 6.0). current oprating version: version 6.1 service pack 0.0"
Can any one help me what is the problem, Is it the operating system or with the MS SQL server and please tell me what we should do in order to rectify this issue</h3>
Please also tell me how to check COMPATABILITY between OS, DATABASE and SAP. we have gone through PAM but not able to find. Can any one help me.

mahesh.boby63 wrote:
> Why we sholud go for modified kernel DVD procedure on windows server operaating system ?
It's not about 'windows' server, but for 'windows 2008 R2' server.
Kernel files included in the 'Installation Media' are by default the old/low patch level not released fully compatible with 'new platforms' like 2008 R2 - which may cause some problems 'during' installation as well.
So, using modified kernel DVD you get two advantages -
1. You are able to avoid 'those' problems during installation.
2. You don't have to go for an explicit kernel upgrade just after the installation.
Thanks

SAP ECC Version 6

Similar Messages

Maybe you are looking for