SAP ECC6.0 and PI 7.0 remote logon problem in windows vista OS

hi,
I got remote connection for sap pi 7.0 and my OS is Windows Vista.
i am getting error like this,
when i click on sap Xi 7.0 and SAP ECC6.0 on sap logon pad,
i am getting the error like this,
sap gui 710
maximum number of connection handles reached.
no more memory is available.
do you want to see the detailed error description
could you some idea on this..what to do?
thanks & regards
Ruban

hi,
I am closing this thread..bec i did not find any soultion.
Thanks
Ruban

Similar Messages

SAP ECC6 memory and paging issues

Dear Experts
I have recently upgraded my 4.6C systems to an ECC 6 system (DB2 LUW 9.5 on AIX 5.3 TL9 64 Bit OS)
I have been running the LPAR with 14 GB of memory and we are around 100-200+ users using the system, I was monitoring using nmon and found that Physical Memory was around 99.8% Used   (14311.8MB and 22.6MB was free) also the paging space was around 37.2% in result causing the system at times to run slow which can have a very negative effect on the users.
After further investigation I found that after a system restart the Physical Memory would start around 50.9% and increased at a steady pace until it reached 99.8% that is when the system would start using the paging space which would steadily increase, I found that the only solution was a system restart at least once a week to reduce the memory consumption.
At first glance it looked like a database manger memory leak with the process db2sysc, so I searched the net with the search words u201Cdb2 memory leaku201D and found the following APARs and notes.
APAR JR30285 - Pervasive memory leak when compiling SQL statements that use SQL/XML functions
APAR IZ35230 - There is a pervasive unix-specific private memory leak in the security component
Note 1288341 - Memory leak in APPLHEAPSZ -> SQL0954C
Note 1352361 - Memory leak in shared memory area abrfci
Note 1147821 - DB6: Known Errors and available Fixes in DB2 9.5 LUW
After reading the notes and APARs I decided to updated DB2 to the latest fix pack (5SAP), but after the fix pack was implemented it did not solve the memory problem
I started look at different problems with SAP ECC6, db2 and AIX with paging/memory problems and I found the following notes to do with AIX memory and paging but none of them helped as all parameters and settings were set accordingly
789477 - Large extended memory on AIX (64-bit) as of Kernel 6.20
191801 - AIX 64-bit with very large amount of Extended Memory
973227 - AIX Virtual Memory Management: Tuning Recommendations
884393 - AIX saposcol consumes large amount of memory.
856848 u2013 AIX Extended Memory Disclaiming
1048686 u2013 Recommended AIX settings for SAP
1121904 u2013 SAP on AIX: Recommendations for Paging
1086130 u2013 DB6: DB2 Standard Parameter Settings
After even more investigation I found the following evidence suggesting AIX Virtual Memory Manager might have a problem

Shared memories inside of pool 40
Key:       42 Size:    17792992 ( 17.0 MB) DB TTAB buffer
Key:       43 Size:    53606392 ( 51.1 MB) DB FTAB buffer
Key:       44 Size:     8550392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     7014392 (   6.7 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    10241024 (   9.8 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     2769392 (   2.6 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        4 Size:      523048 (   0.5 MB) statistic area
Key:        6 Size:   692224000 ( 660.2 MB) ABAP program buffer
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:   134217828 ( 128.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       18 Size:     1835108 (   1.7 MB) Paging adminitration
Key:       19 Size:   119850000 ( 114.3 MB) Table-buffer
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900114 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 16
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....:         16
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 692224000 ( 660.2 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 1654.8 MB
..in pool 10 328.6 MB,   58% used
..in pool 40 143.3 MB,   30% used
..not in pool: 1174.1 MB
Processes........................: 413.4 MB
Extended Memory .................: 6144.0 MB
Total, minimum requirement.......: 8212.2 MB
Process local heaps, worst case..: 3814.7 MB
Total, worst case requirement....: 21882.9 MB
Errors detected..................:    0
Warnings detected................:    3

TS1369 I have an Ipod nan 7th edition and cant download music from itunes on my windows vista computer?

I have an ipod nano 7th generation and can't download music from itunes onmy windows vista computer?

iPod not recognized in 'My Computer' and in iTunes for Windows

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

Hi joe beischel,
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence

I allowed itunes to up date my version and now i cannot open itunes on my windows vista laptop

I allowed itunes to update my version and now itunes will not open on my windows vista laptop

i get an error message that itunes did not install correctly.
What's the precise text of that error message please? (There's a few different ones I can think of that you might be getting.)

SAP NetWeaver 04s SP9 for JAVA Installation problem on Windows Vista

Hi Guys,
Firstly, anyone installed WAS on Windows Vista home version?
I have gone thru couple of postings in the SDN and disabled firewall but no use.
here is link : Port 21212 error : Couldn't install 2004s
When I am trying to install, getting below problem.
Error log
<b>SAPinst is not available on localhost:21200
Connection to SAPinstAdapter could not be established, see following messages.
Could not connect to host localhost on port 21200
Java.net.ConnectionException : Connection refused: connect</b>
Thanks in advance for your quick reply....
Prs.

Hi Anand & Mahesh,
Thanks for the quick reply.
Any one of you got a chance to install NW04S 2007 or New York on Windows Vista?
I think suggested one not available in SDN I guess.
If I am not wrong, I can get it from Service.sap.com....
Can you give me the complete path in the service.sap.com if you know....
If this would not click, alternatively I am planning to change my operating system to Windows XP, this is not a good idea but I dont have option.
Thanks in advance for quick reply.
Regards
Prs

SAP problem with Windows Vista

I have purchased a Laptop with Windows Vista OS having Internet explorer 7.0 and loaded SAP GUI 6.40 with patch 20. I am facing the following problems:
1. Not able to execute CJ20N transaction
2. Heirarchy reports are not showing column descriptions
3. Some standard reports are not able to be executed
4. Not able to get connected to my client thru Cisco VPN
5. Not able to reply in webmails
Also some times my system is taking lot of time to execute simple commands and shutdown.
Can anybody help me how to resolve these?
Thanks
Raghu

try this link:
https://smpdl.sap-ag.de/~swdc/012002523100000896772007E/50083078_4.ZIP?_ACTION=DL_DIRECT
if this does not work, try at http://www.sapsuperusers.com/forums/showthread.php?t=6088 but you will need to register on that website first.

When using facebook, Firefox locks up and nothing works except a hot shutdown on Windows Vista

About twice a week, usually, but not always, when using facebook, my screen locks up, no buttons or clicks on links work and I get a message in the Firefox title bar that says: "Firefox not responding". I'm running Windows Vista Home Premium on a Toshiba Satellite laptop and the only other window open is my email account on GoDaddy, but this happens even when that is not open. My hard drive LED begins glowing steady "on" when this occurs when usually it is flashing or not glowing at all. It frequently happens when changing facebook pages or trying to close facebook. Sometimes I get a "wait" hourglass, sometimes not. I have tried leaving the computer alone to let it sort out on it's own, and I have tried machine gun tapping on the "close" button. Either way the only resolution is a hot shutdown (hold down the computer power button until the computer shuts down) and wait a few minutes before reboot. On reboot, the same facebook page will open automatically and sometimes will lock up again when I try to close that window. On more rare occasions this lockup happens on sites other than facebook. My computer guru has looked at my setup and tells me my computer is fine and virus free. Since I'm a computer doof I don't know what he is talking about. Any ideas? Is there a difference between a "crash" and a "lockup" or do they mean the same thing?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

32-bit Siebel 7.7 and 7.8 Web Client on 64-bit Windows Vista

Hello all,
do you think it is possible to successfully install the 32-bit Siebel Web Client (version 7.7 and 7.8) on Windows Vista 64-bit ?
I'm running Siebel client software against an Oracle 9i database. In fact, my Oracle client is version 10g (32-bit). But it works fine. Even with non-Oracle software.
I succeeded in installing the 32-bit Siebel Tools (7.7/7.8) on my 64-bit Vista. Just had to prevent the installer from putting the software into the default folder which is "C:\Program Files (x86)". Using the default folder resulted in the Tools being not able to locate the Oracle tnsnames.ora file. I created my own C:\PRG folder instead. So for example, I now have "C:\PRG\Siebel\7.7\Tools" for Siebel Tools 7.7.
I hoped this method would work for Siebel Web/Developer client 7.7/7.8 as well. But it didn't. In the middle of the installation process, the installer told me it could not locate MDAC and rolled the whole thing back.
I googled a bit around and found that Windows Vista do not use MDAC any more. It uses "Windows Data Access Components" (Windows DAC) instead. But I also checked my "C:\Program Files" and "C:\Program Files (x86)" folders and found that, for example, msado15.dll and msadoXY.tlb (which is a part of that MDAC/DAC stuff) is there, both 32-bit and 64-bit versions.
So my question is:
How can you make the Siebel Web Client installer think that MDAC is in place and find it there (in the 32-bit folder, of course)?
I'll welcome any help.
Thanks,
Pavel Foltyn

First of you need to make sure you have the right versions of Siebel installed. Only the newest versions work in high interactivity mode with IE 7.0 and Windows Vista.
Have a look at:
Support for Microsoft Internet Explorer 7 (IE7) (Doc ID 475275.1)
on Metalink 3.
Geting that to work with the Vista 64-bit, is more then pushing it.
Just my 2 cent.
Axel

Problems with Windows Vista and Speedster 945GT?

Hi!
I've been trying to install Windows Vista on my Speedster 945GT-based system for some time now, but I am unable to get it to run stable.
It hangs on random occasions when installing and if one is lucky it's gets thru the install but then it hangs at the desktop in Vista.
I'm using the latest BIOS version out (1.2) and a Core2Duo T7600 CPU.
I have even tried other CPU's to rule out CPU error with the same results. Same goes with different sticks of memory.
Does anyone have a sollution to this problem?
Btw, it works fine when Windows XP is installed.
Best regards
Johan

I had similar problems with Vista 32-bit (Ultimate). I got the board with BIOS v1.0, while I also purchased a T7200 Dual 2 Core. This did not work at all. MSI Netherlands was kind enough to flash the BIOS for me with v1.2 so I could get things working. However, I was not too lucky with Vista. Could just get to the boot screen, but then it hung.
BIOS v1.3 did the trick. I have things working now, but the onboard video is a disaster. Windows Update installed new chipset drivers but this did not help. Intel Graphics drivers did also not improve things.
I started with an analog connection to my 1280x1024 Philips 170B2. Worked ok, but could not get the system working in a higher resolution than 1024x768 which is obviously not preferred. At that time, the DVI connector of my monitor was in use by another system, soon to be replaced by this one.
Instead of worrying about the resolution on the analog connection I thought it was time to hook my monitor up via DVI. And then things started to get even worse.
The POST is visible, you can see Windows starting but then there is a black screen. Windows is fully loading, I can hear through the speakers. I can even login, but still no screen.
So I went back to analog VGA and guess what - same issue with analog VGA now!
System works 'fine' in Safe Mode, but even the 640x480 boot option does not help.
My temp solution now is to use my 7600GS, but as the onboard video might be good enough for me (if it works), I would prefer to get things working.

Problem with Windows Vista, PC Suite and E90

PC Config:
SO: Microsoft Windows Vista Business TabletPC (ENG Language)(with all the Updates for the SO).
Nokia: PC Suite 6.84.10.3
Phone: Nokia E90 Comunicator with firmware V07.24.0.3 -12/06/07 - Nokia E90-42
After installing the PC Suite and establish the communications if I check the Event Viewer I will find a large set of error messages marked as critical.
The error text is the following:
..................Start_error......................
The device E90 (location 353659010805204) is offline due to a user-mode driver crash.
Windows will attempt to restart the device (till 5 times) more times.
Please contact the device manufacturer for more information about this problem
The source is: DriverFrameworks-UserMode
.................end_error.........................
Does anyone know more about this?
Thanks

the window7 is stil new whait for the server pack to solev it
phones i have 2730c - C1
KUDOS ME IF YOU FIND MY ANSWERS HELP FULL

I cannot use Microsoft Hotmail with Firefox 3.6.24 and Windows 7. I click on an email but nothing happens. I did not have this problem with Windows Vista. Any solutions would be greatly appreciated.

The Windows 7 is on a new Dell Inspiron desktop. The Windows Vista is on a Dell Studio laptop that I have had for a while. The Hotmail also works fine on the new computer when I use IE9.

Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.2 r152
# Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
*http://www.mozilla.com/plugincheck/
Update the Flash plugin to the latest version.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the Java plugin to the latest version.
*https://support.mozilla.com/kb/Using+the+Java+plugin+with+Firefox
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

FireFox 4 and earlier versions will not install on my Windows Vista, 64 bit computer. The file downloads and the file extracts but I never make it to the installation wizard.

I have tried to download FireFox 4 and earlier versions from several different website, thinking the files might have gotten corrupted, and each time I download the file the exact same thing happens, the file downloads and the file gets extracted but when the extraction completes the small window dissappears and nothing else happens.
My machine is a Windows Vista 64 bit system and I've tried downloading the file with my 32 and 64 bit Internet Explorer but nothing seems to work. Can someone help me please because I would love to be able to completely delete I.E.

Hi, thanks for your Flash file info. Well you must have been doing it right, since all of your Flash files for IE and FF are correct.
The SWF plugin for FF and the SWO for IE are also correct.
You shouldn't be having any problems with Flash Player.
What you can try is to turn off the hardware acceleration feature. Go to any video, like youtube and right click on the video and click on Settings. Display Settings is where you will UN check hardware acceleration.
See if that helps. Let me know.
Thanks,
eidnolb

Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

Hi again,
I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
Thanks a lot. Any suggestion or advice very welcome and appreciated.

I ran into this with Windows7 64 but, could not get the jet 4.0 to work. Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect. I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

SAP ECC6.0 and PI 7.0 remote logon problem in windows vista OS

Similar Messages

Maybe you are looking for