SAP ECC6 EHP7 Kernel 7.41.. SM04

Dear All,
Recently we have upgraded our ECC system to EHP7 and kernel 7.41. I was just surprised to see SM04 and could not figure out how to see memory consumption by a users in each of its sessions.
Earlier we used to select user in SM04 and the goto --> memory system wide then it displayed the same.
Can anybody suggest how to achieve in this new kernel ? Or is there any other tcode for the same.
Thanks
SS

Hi Gaurav,
Thanks for reply.
My requirement is I need to monitor memory consumption by a user in all his sessions.
Earlier in kernel 700 in SM04 i used to select the user and Goto--> Memory and it displays the memory consumption by users in each of its session individually.
Now in upgraded system I can only see Total memory consumption by a user in all of its sessions, I cannot figure it out how to see individual memory usage for every session.
I hope I elaborated, let me know if you need more on this.
Regards
SS

Similar Messages

Windows requirements for SAP ECC6 EhP7

Hi experts,
we want to install SAP ECC6 EhP7 on Windows Server (2008 or above). I've already checked on the PAM its feasability, with Kernel 7.40. The DB would be Oracle 11.2.0.4.
I've found that for hardware that: 4 CPU ~2GHz each with 10 Gb Memory and 500 Gb Disk is the minimum (tell me if I'm wrong), but now I'm more interested in the software part.
So I'm trying to find info about windows package (language and else) necessary for SAP ECC6.0 EhP7 installation. I tried to find notes about it but in vain...
Could you give me some tips ?
Thank you for your time,
Best regards.
Alexiel.

Hi Divyanshu,
thank you for your help and fast reply and sorry for my late reply, I was busy doing something else.
I'll check your link that seems very insteresting! Thanks for sharing.
Regards,
Alexiel.

Vendor and Material Replication from ECC6 Ehp7 to SRM7.0

Hi Experts,
I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
ECC system - ECC6.0 Ehp 7 & SRM system - SRM7.0
Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
Errors :
1. Material Replication Error in SMW01
Mat. for Initial Download: Table not supported by function
Alternative units of measure are inconsistent; correct the values COM_PRODUCT_UNIT COMM_PR_UNIT
Alternative units of measure are inconsistent; correct the values
Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
2. Vendor Replication Error in BBPGETVD
Backend systems with Release 740 are not supported
Message no. BBP_BUPA002
What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
Please Suggest the valuable comments to resolve the problem as earliest.
Thanks & Regards,
Ramprakash N

Dear Ramprakash,
Please check below URL for #1.
Alternative units of measure are inconsistent; correct the values in SMW01
Please find the following note which might help you for issue #2.
1313972
1349825
1372175
Thanks
Shuvrajyoti

SAP PI7.11 adapter RFC sender issue after migrating to SAP ECC6

Hi,
After the migration of our backend from SAP 4.700 x 200 to SAP ECC6 unicode (kernel 7.20)), we have a issue of connexion to our SAP PI 7.11.
A part of the field in ECC6 are not well mapped by the abapter sender RFC to the xml in PI.
I join a screen shot what I have in SAP ECC6 (inquiryECC6.jpg) and the result in SAP PI 7.11in xml format ofcourse (Inquiryxml.jpg).
Is there someone who can help me?
Regards.
Eric Koralewski

In SM59, there is a new tab <unicode>.
In that tab, I checked the unicode checkbox and that's ok.
Regards

SAP ECC6 memory and paging issues

Dear Experts
I have recently upgraded my 4.6C systems to an ECC 6 system (DB2 LUW 9.5 on AIX 5.3 TL9 64 Bit OS)
I have been running the LPAR with 14 GB of memory and we are around 100-200+ users using the system, I was monitoring using nmon and found that Physical Memory was around 99.8% Used   (14311.8MB and 22.6MB was free) also the paging space was around 37.2% in result causing the system at times to run slow which can have a very negative effect on the users.
After further investigation I found that after a system restart the Physical Memory would start around 50.9% and increased at a steady pace until it reached 99.8% that is when the system would start using the paging space which would steadily increase, I found that the only solution was a system restart at least once a week to reduce the memory consumption.
At first glance it looked like a database manger memory leak with the process db2sysc, so I searched the net with the search words u201Cdb2 memory leaku201D and found the following APARs and notes.
APAR JR30285 - Pervasive memory leak when compiling SQL statements that use SQL/XML functions
APAR IZ35230 - There is a pervasive unix-specific private memory leak in the security component
Note 1288341 - Memory leak in APPLHEAPSZ -> SQL0954C
Note 1352361 - Memory leak in shared memory area abrfci
Note 1147821 - DB6: Known Errors and available Fixes in DB2 9.5 LUW
After reading the notes and APARs I decided to updated DB2 to the latest fix pack (5SAP), but after the fix pack was implemented it did not solve the memory problem
I started look at different problems with SAP ECC6, db2 and AIX with paging/memory problems and I found the following notes to do with AIX memory and paging but none of them helped as all parameters and settings were set accordingly
789477 - Large extended memory on AIX (64-bit) as of Kernel 6.20
191801 - AIX 64-bit with very large amount of Extended Memory
973227 - AIX Virtual Memory Management: Tuning Recommendations
884393 - AIX saposcol consumes large amount of memory.
856848 u2013 AIX Extended Memory Disclaiming
1048686 u2013 Recommended AIX settings for SAP
1121904 u2013 SAP on AIX: Recommendations for Paging
1086130 u2013 DB6: DB2 Standard Parameter Settings
After even more investigation I found the following evidence suggesting AIX Virtual Memory Manager might have a problem

Shared memories inside of pool 40
Key:       42 Size:    17792992 ( 17.0 MB) DB TTAB buffer
Key:       43 Size:    53606392 ( 51.1 MB) DB FTAB buffer
Key:       44 Size:     8550392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     7014392 (   6.7 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    10241024 (   9.8 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     2769392 (   2.6 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        4 Size:      523048 (   0.5 MB) statistic area
Key:        6 Size:   692224000 ( 660.2 MB) ABAP program buffer
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:   134217828 ( 128.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       18 Size:     1835108 (   1.7 MB) Paging adminitration
Key:       19 Size:   119850000 ( 114.3 MB) Table-buffer
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900114 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 16
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....:         16
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 692224000 ( 660.2 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 1654.8 MB
..in pool 10 328.6 MB,   58% used
..in pool 40 143.3 MB,   30% used
..not in pool: 1174.1 MB
Processes........................: 413.4 MB
Extended Memory .................: 6144.0 MB
Total, minimum requirement.......: 8212.2 MB
Process local heaps, worst case..: 3814.7 MB
Total, worst case requirement....: 21882.9 MB
Errors detected..................:    0
Warnings detected................:    3

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24

While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
I had finished upto 4 stpes . and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
Please Retry , View Log & Stop.
I am clicking Retry again it will be come same issue. Please Let me know.
Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"

Still I am getting same problem in mine SAP ECC6.0 Installation.
In Abap Instance Phase 20 of 24. Error in ABAP Instance. I check the mmc.
Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
Still Going Installation for same Process.
Let me know.

SAP ECC6.0 and PI 7.0 remote logon problem in windows vista OS

hi,
I got remote connection for sap pi 7.0 and my OS is Windows Vista.
i am getting error like this,
when i click on sap Xi 7.0 and SAP ECC6.0 on sap logon pad,
i am getting the error like this,
sap gui 710
maximum number of connection handles reached.
no more memory is available.
do you want to see the detailed error description
could you some idea on this..what to do?
thanks & regards
Ruban

hi,
I am closing this thread..bec i did not find any soultion.
Thanks
Ruban

EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions. Can anyone give me best practice answer the following Questions? We are on SAP ECC6 R3
What Application? i.e. V2, V7?
What output condition to use? i..e. LALE, LAT2, SEDI????
What Message type? i.e SHPADV?
What Basic Idoc Type? i.e SHPMNT05?
What Message Code? i.e. SHPM?
What Process Code? i.e. SHPM??
What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
Does the SAP Transpotation Module have to be configured for this to be implemented?
Your comments are greatly appreciated, we have until Nov 1 to be compliant?

Good Morning,
While I did not get any responses from my question, yes, I was able to determine what needed to be configured. I hope the below will help you: This is for SAP ECC6
The output application for the 753 Routing Request is "V7"
The output type is "SEDI"
Transmission medium is "6"
The Basic Idoc type is "Shipmnt05"
when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
I have not configured the Inbound 754. For now the inbound 754 Routing Instructions will be emailed to our traffic department.
Thank you,
Have a great day,
jane

How to view Index fragmentation in sap ecc6 ?

how to view Index fragmentation in sap ecc6 ?

Hi Haimiao,
You can use brtools to get required information. For relevant steps use the link below
https://help.sap.com/saphelp_nw04/helpdata/en/08/5742154ae611d1894f0000e829fbbd/content.htm
Regards,
Deepak Kori

Stock Report in Sap ecc6

Dear Team,
I was previously using Russian J3RFLVMOBVED in Sap ecc6. It was working fine for the last two years for stock valuation quantity & Value wise. From Jan 2012 this report is showing Negative Stock in the report. For this i consulted ABAP for the check the values source (from which table these negative values are arising) in table MBEW & BSIM. These values also didn't existed in the Table mentioned above. Can any one advice me for this problem?
Also can any one provide me alternative report in sap ecc-6 for Stock quantities & Values on specified dates along with the sub locations.
Secondly is there any standard report for Material Aging?
M.Yousuf

Hi,
I have checked mb5b its not addressing my issue as its showing valuated stock without location & Batches. I have checked S_POO_07000139, ITS ALSO SHOWING Valuated Stock without Batch Plant & Location wherease MC.1 & other MC Tcodes. They are showing valuated stock without batches material code & Description in a summarized form.
I need this stock report for the stock count on month End in a summarized form.
Please advice any other solution.
M.Yousuf

Webdynpro ABAP ALV in SAP ECC6 - EHP4: To disable Column Selection

Hi All,
We are using SAP ECC6 EHP4 and for Webdynpro ABAP application, after each column a vertical white line is appearing, and I need to hide this..
SAP suggested us to disable COLUMN SELECTION I have tried the below code but still I am not able to get this done..
Can you please suggest the appropriate method to achieve the same.
Code:
* show tab COLUMN SELECTION in Settings page
CALL METHOD wd_this->alv_conf_table->if_salv_wd_std_functions~set_column_selection_allowed
EXPORTING value = ABAP_false..
here alv_conf_table refers to CL_SALV_WD_CONFIG_TABLE.
Thanks in advance.
Thanks
Srinivas
Edited by: Srinivas Manchi on Apr 22, 2010 11:35 AM
Edited by: Srinivas Manchi on Apr 22, 2010 1:06 PM

You have to disable the DDic binding on the column before your override text will show up:
data: l_ref_cmp_usage type ref to if_wd_component_usage.
l_ref_cmp_usage =   wd_this->wd_cpuse_alv( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
data l_salv_wd_table type ref to iwci_salv_wd_table.
l_salv_wd_table = wd_this->wd_cpifc_alv( ).
data l_table type ref to cl_salv_wd_config_table.
l_table = l_salv_wd_table->get_model( ).
data l_column type ref to cl_salv_wd_column.
l_column = l_table->if_salv_wd_column_settings~get_column( 'POSTING_DATE' ).
data l_header type ref to cl_salv_wd_column_header.
l_header = l_column->get_header( ).
l_header->set_prop_ddic_binding_field(
    property = if_salv_wd_c_ddic_binding=>bind_prop_text
    value = if_salv_wd_c_ddic_binding=>ddic_bind_none ).
l_header->set_text( `Posting Date` ).

Maintain Authorization Field in SAP ECC6.0

Hello all,
Our SAP system has upgraded from SAP 4.7 to ECC6.0 recently. After upgrade, I find that the function Maintain
Authorization Field - SU20 cannot be launched.
When I run the T-code SU20, the maintain authorization fields screen does not appear and a message "Start of Application: Maintain Authorization Fields" flash one time in the message bar (bottom left corner at the SAP screen).
Can I ask how to maintain Authorization Field in SAP ECC6.0?
Thanks
Sunny

Hello,
Does anyone know how to maintain Authorization Field in SAP ECC6.0?
Many thanks
Sunny

SAP ECC6.0 Installation problem as abap on oracle 10g

Hi guru's
i am facing following error during installation of SAP ECC6.0
development server with oracle 10g (10.1) database & windows 2003 server OS.
During the installation step "create database statistics" following error occured.
ERROR 2009-03-07 03:23:40
CJS-30023 Process call 'D:\usr\sap\DEV\SYS\exe\uc\NTI386\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -p 2' exits with error code 5. For details see log file(s) brconnect.log.
ERROR 2009-03-07 03:23:40
FCO-00011 The step createOracleStatistics with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0|NW_ORA_Statistics_Create|ind|ind|ind|ind|0|0|createOracleStatistics was executed with status ERROR .
brconnect.log
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVA~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVAT~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVAT~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVD~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVD~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVDATA~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVDATA~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVDT~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVDT~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVF~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVF~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVFT~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVFT~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0301E SQL error -1001 in thread 2 at location stats_ind_collect-3, SQL statement:
'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR3"', INDNAME => '"TCNVG~0"', ESTIMATE_PERCENT => 1, DEGREE => NULL, NO_INVALIDATE => FALSE); END;'
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_STATS", line 10621
ORA-06512: at "SYS.DBMS_STATS", line 10645
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for index SAPSR3.TCNVG~0
BR0280I BRCONNECT thread 2: time stamp: 2009-03-07 03.23.39
BR0844E 100 errors occurred in thread 2 - terminating processing of the thread...
BR0280I BRCONNECT time stamp: 2009-03-07 03.23.39
BR0848I Thread 2 finished with return code -1
BR0280I BRCONNECT time stamp: 2009-03-07 03.23.39
BR0879I Statistics checked for 22 tables
BR0878I Number of tables selected to collect statistics after check: 0
BR0880I Statistics collected for 0/14 tables/indexes
BR1308E Collection of statistics failed for 17956/17936 tables/indexes
BR0806I End of BRCONNECT processing: cepzzztx.sta 2009-03-07 03.23.39
BR0280I BRCONNECT time stamp: 2009-03-07 03.23.40
BR0804I BRCONNECT terminated with errors
Regards
Manvir Bhatia

Hi,
Your DB is running on 10.1, it is not recommended. Update the patch to 10.2.0.2 and apply the interim patches. Then retry the installation.
Mahesh

Accessing SAP ECC6 from EP

Dear All,
Our Netweaver EP developer is requesting for SAP_ALL to access sap ecc6 system.
Are there any standard role from sap to support RFC call from Netweaver AS to SAP ECC6.
in reality the requirement is only to make web based application for editing personal user information.
Thanks and Regards
Syed Saifuddin

Hi Jurjen Heeck
I think my knowledge is very less so I did not express the requirement in my question.
Application built on Netweaver EP is a java web based application it can connect with Dev or Qty or Prd.
But for connecting to any system the Netweaver Server need a username in SAP.
now during development I can create a user having SAP_ALL in Development System.
Now the same application need to connect to Quality and then to Production.
So in Quality I want to restrict the user to only T-Code used in the portal application and those require for RFC communication.
I want to know is there any standard Role or T-Code so I can assign it to user to run application from EP.
Regards
Syed Saifuddin

SAP ECC6 EHP7 Kernel 7.41.. SM04

Similar Messages

Maybe you are looking for