SAP EH&S :- Dangerous goods indicator profile in material master
Helo All.
Can anyone explain the sequence of customisation for dangerous goods checks carried out during sales?
The DG indicator profile is assigned to material master and is configured in IMG.
What is the sequence of customisation ?
To where this indicator profile is assigned? How further checks are carried out?
Points are assured !!!!
Hi Anay,
Dangerous goods checks must be carried out and shipping documents must be completed with dangerous goods data for sales and transportation.In case of hazardous substances, an advance copy of MSDS of the products shall be sent to the customers.
Material based dangerous goods master u2013 dangerous goods checks and the automated creation of dangerous goods document from sales and distribution process are covered therein. The material master may trigger report shipping when a material is assigned to a substance. The MSDS output is then selected according to a condition scheme.
Access the activity using one of the following navigation options:
Environment, Health & Safety - Dangerous Goods Management - Dangerous Goods Checks and Dangerous Goods Documents/EDI - Dangerous Goods Checks - Assign Dangerous Goods Check Schemas - Assign DG Check Schemas for Sales Documents
Or transaction code: SPRO
On the change view u2013 assign DG checks schemas for sales document and save. Return and follow same step - Assign DG Check Schemas for Shipping Documents.
Step:3
TC: VV21
Choose output type u2013 LD00 and choose return
Enter data for sales organization and customer C-1002 and save.
Hope the info above will be useful.
Similar Messages
-
DG (Dangerous Goods) Indicator Profile
In Material Master, Basic Data2 view -> Under Environment TAB, there is a field DG indicator profile, I want to configure values for this field.
In SAP Standards, i want to know what kind of values are maintained for DG indicator profile?
Could you please suggest me?
Thanks in advance.Hi Vikrama,
I completely agree with your comments.
Actually i require this SAP standard dangerous goods to add as charateristic value for one of the French classifications maintained in my company's MM -> classification view.
For this, i already have 3 codes like
1. Flammable gas
2. Non Flammable gas
3. Flammable liquid
I need to know what are the other ones maintained as dangerous goods in SAP standards so that it comes under any one of the 5 profiles that you have mentioned in previous reply.
Please let me know, if the query is not clear.
Thanks in advance -
How to cancel serial no. profile from material master ?
dear all SAP experts,
I have 1 mateial in which i assign serial no. profile in work scheduling view in material master. So how can cancel serial no. profile from material master ?
Suggest me
regards,
Nitin NerkarAs long as no serial numbers exist for the material you are able to cancel or change the serial number profile.
As soon as serial numbers exist for the material and you want to change or delete the serial number profile, you must note the following:
The previously assigned serial numbers are no longer suited to the current serial number profile.
The indicator for the stock check may have changed. If this is the case, you can copy the profile settings in the serial number using the executable report program RISERNR9. However, you should only start this program once the changes have been updated in the material master record.
You can no longer delete the serial number profile in the material master record. Instead of this, you create a serial number profile without serialization procedures in Customizing and enter this in the material master record. -
Create a specific user profile to Material master data
Dear colleagues.
We need create on R/3 4.6 a specific user profile for material master data, to create or modify (MM01/MM02) only the following views: 'Sales org. data 1', 'Sales org. data 2' and 'Sales:General/Plant data'. The problem is that when I use the SAP gui functions, I can create the profile, but also with the views 'Foreign trade: Export data' and 'Sales text'. Someone know how create this profile without this last two views? Thanks.See:
http://technet.microsoft.com/en-us/library/cc262327(v=office.15).aspx#create
And a more complex, in-depth example leveraging MMS:
http://www.sharepointsteve.com/2010/10/making-custom-user-profile-properties-searchable-in-sharepoint-2010/
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Auto PO indicator in the material master
Hi there,
How can we activate PO indicator in the material master?
Pls guide,
thank you.at mm02, check the autom.PO.
-
How to remove sr. no. profile from material master
Dear all,
I have maintained serial no. profile-Q001 in plant data/stor.2.
But now I want to remove serial no. profile from material master.
but it showing message serial no. already assign to this material.
Pls suggest
Thanks
Shabbir.KureshiDear Thyagarajan,
I have got the solution.
Thanks a lot.
Thanks & Regards
Shabbir Kureshi -
How to remove the serial no profile in material master
Hi experts
While changing the SerialNoProfile in Material master i am getting the following error message: Serial numbers already assigned to this material Please tell me the procedure how to remove the serial number profile for the material.hi
it is not possible to change the serial number profile once the serial numbers are existed for material .you can however create a separate serial no profile without serialization procedure and assign the same to the material
Also refer [serial number|http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/abc17e413911d1893d0000e8323c4f/content.htm]
regards
thyagarajan -
Number of Profiles in Material Master?
How many profiles can be created using Material Master?
What profile are you specifying about , if you are talkig about MRP profle can assinged at the time of Material master creation at each material type...............
-
Rounding profile in material master sales view
Hi, can anyone advise if we can use the rounding profile to check the qty entered rather than system rounding the qty automatically in the sales order?
Thanks
PPPls ignore...this is a duplicate thread.
-
Regarding table VBEPDG- Dangerous goods
Hi Friends.
I need help regarding table VBEPDG.
Can anybody tell me how entries are made in table VBEPDG? Whether its configuration table or master data table?
In my purchase order an item has been wrongly marked as dangerous material,
and this is leading to table VBEPDG.
Thanks in advance.Dear Saketpanse,
the table VBEPDG contains the schedule line data for the dangerous goods. If the material is not dangerous then the entry should not be created. Probably the material initially was classified as a dengerous one and is currently changed to the non-dangerous. Am I correct ?
In this case the entry in VBEPDG will remain because during creation of the order the material was dangerous. Quite generally, SAP does not recommend to change Customizing or Master Data in the Life-system. It can cause many inconsistencies. The correct way to do such a change would be to reject all sales documents which could be affected by such a change, then do the change and then create the sales documents again. It is for the future.
Concerning the current inconsistency. The correct way would be: to indicate the material temporary as a dangerous one again, then delete the sales order item, and then to indicate the material as a non-dangerous one and create the item again. If you have already subsequent documents, then you can only reject the item. Then the VBEPDG entry will remain, but will not disturb you anymore. Alternatively, you can write a simple ABAP report, which deletes the VBEPDG entry.
I hope, that this information will help you a little bit further.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP, Walldorf/Germany -
Updation of ABC indicator in Material Master
Hi,
For ABC analysis, I carried out it according to T_code MC40(Usage value). I got the category of material. For eg "A".But how the ABC indicator updates in Material master.Because I couldnt get indicator in MRP1 view.
Whats the right way? Pls guide me.
Thanks,
Goraksh.Hi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks. -
Discontinuation indicator in Material Master
Hello,
I am using discontinuation group concept in BOM which replace 1 old material with multiple folloup materials.
My system ( ECC5.0) does not display discontinuation indicator 2 ( discontinue group in BOM). As a workaround I am using discontinue indicator 1 in material master, which makes entry of atleast 1 folloup material in material master mandatory.
Does anyone know how to enable discontinue indicator 2 in material master?
Thanks,
RamHi,
The indicator 2 is not offered either in BOM or material master. It works as below:
Set the discontinuation indicator as 1 for the material to be discontinued in the material master along with other required details. Now in the BOM for the discontinued material, click on discontn & specify the follow-up group as say A1. Then specify follow-up group as A1 for materials which need to follow up this material.
Create a planned order & explode the BOM in the planned order, you will then notice the indicator 2 for the material which you discontinued in the material master & in BOM.
Hope it clarifies your query.
Regards,
Vivek
Added
Hi Bramhankar,
Glad to note you're now the Mentor for this forum. Best wishes & hope your knowledge continues to enrich this forum....!!!
Edited by: Vivek on Aug 5, 2009 8:43 AM -
How to remove dangerous goods block indicator from Shipment Header?
Hi All..
I want to remove the dangerous goods block indicator from shipment header.
How to go about this?
Thanks.You can enter a shipment blocking reason in the delivery. When you
create a delivery, a shipment blocking reason is proposed on the basis
of the delivery type.
IMG->LE -> TRanspotation ->Shipment->Def Blocking reason for shipment.
Please delete the reason.
IMG-> LE -> TRanspotation ->Shipment->maintain transportation relavence.
Remove Shippingblock assigned to delivery type.
try it and let us know. -
Dangerous Goods checks in transfer order (based on purchase order)
Dear,
We have defined a process to transfer products from one plant of our company to another plant of our company based on a purchase order (Transfer order), a delivery and a shipment.
Problem: the delivery and shipment could be checked in a Dangerous Goods standpoint but nothing seems to be available in standard to check the process at the first step : at purchase order step.
My question is : do you know if a standard feature exist on purchase order to ensure a "non frustating process" as soon as possible ?
Many thanks for your help
Best regards, JérômeDear Jerome
DG Set up is only related to SAP SD process (e.g. check SAP EHS online help), Therefore DG checks are not available in the purchase part. And your scenario it quite standard; Normally the DG check part starts in Sales process, then in delivery and then in shipment. If you use SAP TM again you can use DG checks there.
C.B.
PS: e.g. SAP GTS and SAP EHS SVT are integrated in purchase process by standard. But is is not a good idea to "misuse" these modules for DG perspectives in MM process.
PPS. may be check: Blocking Hazardous Materials for Purchasing with HSM,
System-Internal Stock Transfer Using Stock Transport Orders - Integration of Transaction Data - SAP Library -
User-Exit or Badi for dangerous goods - master data
Is there any user-exit or BADI we can use while changing or saving dangerous goods?
We want to do a copy on other dangerous goods immediately after the change or creation of the dangerous goods master data.
But I can't find an user-exit which can be used before the changes are saved.
Can anybody help?
Thanks!Hi,
Please check SAP enhancement DG100001
You can use this SAP enhancement to define a customer exit to write change documents for dangerous goods master data and packaging data.
The customer exit is in the function group XD10. It is called from the function DG10_CHANGE_DOC_USER_EXIT.
If the system does not find a customer exit, a standard document description is called. This is stored in the include LDG1NU03
Hope this will solve your problem
Regards,
Keshav
Maybe you are looking for
-
Table for open Purchase order and pending invoices for vendors
Hi, Are there any table to know open Purchase orders and pending invoices for vendors. Quick response will be appreciated. Thanks & Regards
-
Hello experts, We currently have one custom extractor from ERP feeding one data target in BI. We are looking to add a new BI system in to the landscape and I would like to know if it is possible to use this same extractor to feed 2 data targets at t
-
Problems with sharing internet connection via usb
I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works
-
Delivery and Service Header Fields in RNIF Receiver Adapter for Rosettanet.
Hello all, I need to populate the Delivery and Service header fields in Rosattenet MIME message in the receiver side. For the sender side RNIF adapter, we can very well use the Adapter Specific message to get those fields from Rosattenet MIME messag
-
htmlb:tree : Node IDs not unique - error handling
From an internal table of customers and contact persons, I made a tree using TVIEWNODE2 structure. Some of the customers are not having contact persons for which contact person ids are simply '00000000'. Thus these nodes may not be unique here. Someh