SAP EHP5 MSCS installation with IBM DB2 9.7 on windows 2008 R2

Dear Sir
i am installing SAP EHP5 high availability with IBM DB2 9.7 on windows 2008 R2
first cluster node installation is completed,
now i am going to install database instance, before that i am configuring the database for MSCS as per installation guide,
but the database group is note creating in Failover cluster manager.
if you have any solution please reply
regards
gourishankar baikerikar

HI,
Thats a printing mistake in installation guide..
copy db2mscs.ese file to db2mscs.cfg ...
Remove all the unwanted stuff like explination of parameter paragraphs
Confgure required parameters like below and make sure there are no unwanted spaces in the txt file.
#Global section
DB2_INSTANCE = DB2SID
DB2_LOGON_USERNAME = XXXXXX\db2sid
DB2_LOGON_PASSWORD = password
CLUSTER_NAME = GXXXXX
MSCS Group for Node 0
GROUP_NAME = DB2 SID Group
DB2_NODE = 0
#IP_NAME = DB2 IP SID
#IP_ADDRESS=192.168.0.xx
#IP_SUBNET=255.255.255.0
#IP_NETWORK=Ethernet(3)
NETNAME_NAME = DB2 NetName SID
NETNAME_VALUE = DB2SID
#NETNAME_DEPENDENCY = DB2 IP SID
Open you cluster console and select NODE A there you should be able to identify the disks for DB clustering,
Copy that name and paste it here for DISK_NAME
DISK_NAME = DATABASE_CD2
DISK_NAME = DBLOGS_CD4
#INSTPROF_DISK = Disk M:
#TARGET_DRVMAP_DISK = Disk M:
With the above process you should be able to cluster your DB.
2) Please provide all the steps that you were identified to install , that would give more clarity to reply back where ever required.
Thanks,
Rahul

Similar Messages

SAP ECC6.0 installation with Oracle RAC

Hi Expert,
Current we working on SAP ECC6.0 installation with Oracle 10G RAC on AIX 5.3. The RAC are running on two nodes (servers). And we are using GPFS filesystem (not running on HACMP).
Overall we had completed the Oracle RAC installation (CRS+RDBMS) and tested the oracle failover and it work find. Now we want to start with the SAP installation (with HA). In the SAP installation documentation, it did request to create a virtual hostname on the node and execute the sapinst scripts with below command line.
#./sapinst SAPINST_USE_HOSTNAME=ascs00
But if we are running on Oracle RAC + GPFS do we need to specify the virtual hostname? If not, which hostname i should use to install the HA for SAP? Please advice.
Regards.

And then I'd continue with the documentation at:
SAP on Oracle => SAP on Oracle Real Application Clusters (RAC)
There you can find several installation guides for windows/UNIX/Linux

How does Oracle Database compare with IBM DB2?

Hi
thank you for reading my post
How Does ORACLE Database compare with IBM DB2 ?
Which one has better performance with similar workload?
Which one perform better on System Z hardware and z/OS?
Is there any document that compare these two product?
Thanks.

Hi
The below link may useful to you.
http://www.oracle.com/technology/deploy/availability/pdf/CWP_HA_Oracle10gR2_DB28.2.pdf
With best regards
Shan

Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?

HI all,
Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
Thanks in Advance
Sapsanthose

sapsanthose wrote:
HI all,
>
>
>
> Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
>
>
> Thanks in Advance
>
> Sapsanthose
Hi,
Yes, it does. Check the service.sap.com/pam
Best regards,
Orkun Gedik

SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
Christoph

Hi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph

CUCM 8.6 Installation on VMWare Workstation 9.X On windows 2008 R2

Hi
Iam trying to intall CUCM 8.6 on Vmware 9
i get installation fail, I have attached screenshot for your reference
what iam doing wrong ? is this possible to intall Windows 2008 R2 and Vmware 9 workstation ?
any advice will be helpfull to solve my issue.
OS : windows 2008 R2 64bit
Vmware : 9 workstation
Ram: 16GB
HDD : SATA 1TB
Processor : Xeon Quad Core.
Thanks
Balaji

Hi,
The host OS should not matter as that will not be visible to CUCM's hardware detection script, it's more likely that the guest OS choice (i.e. which variant of Redhat Linux) or physical CPU may not be compatable.
Normally when instaling CUCM you would use an OVA Tempalte when creating a CUCM VM using ESXi:
http://software.cisco.com/download/release.html?mdfid=283782839&flowid=26422&softwareid=283088407&release=8.6(1)&relind=AVAILABLE&rellifecycle=&reltype=latest
This has the the exact guest OS settings CUCM Expects, you could carry on with trial and error to see if you can homefully get the correct settings. The following information from the Cisco Wiki on virtualising CUCM may be a useful reference:
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements
Personally I recomend you bite the bullet and use ESXi, the free variant works a treat with CUCM, the main issue may be if your hardware is in-compatable (i.e. ESXi does not have the built-in drivers).
Thanks
Stephen Welsh
CTO
http://www.unifiedfx.com

Issue while SCS installation of NW 7.3 EHP1 on Windows 2008

Hello Everyone,
I am trying to start Application as JAVA : SCS installation in Distributed mode. I am installing with user having administrator rights. But in the execution phase i am getting the below error and unable to proceed.
in sapinst.log:
ERROR 2012-01-30 03:29:58.964
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2012-01-30 03:29:59.11
FCO-00011 The step setUserEnvironment with step key |NW_Java_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|users|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step: Assertion failed: in
function (role, readAccountData) {
    if (readAccountData === undefined) {
        readAccountData = true;
    NWUsers.trace("NWUsers.getAccountData(", role, ")");
    this._initAccountData();
    ASSERT(arguments.callee, this.haveAccountData(role), "role " + role + " is not created yet.");
    var ad = this._readAccountDataFromKeydb(role);
    if (readAccountData) {
        ad = this._readAccountData(ad);
    var masterpwd = this.getMasterPassword();
    if (ad.password == "" && this._useMasterPasswordForAccountData(ad) && ad.type == "USER" && masterpwd !== undefined && role != NWUsers.roles.J2EEGuest && !ad.locked) {
        ad.password = masterpwd;
    NWUsers.trace("NWUsers.getAccountData(): ", dump_properties(ad));
    return ad;
role SAPSIDDB is not created yet.).
Please can you suggest on this.
Thanks!
- Tushar

HI,
Please check other logs just below or above the sapinst.log as well (latest ones). I don't know about any roles by the name SAPSIDDB.
Try posting them. And please post if your were able to solve it. Probably a retry would be also a better option. I am sure you are using proper user IDs. Windows 2008 has lot of problems because of authorizations. Make sure all authorizations regarding OS levels users have been thoroughly checked. It seems to be as a windows error rather than installation problem.
Varun

Windows Installer 4.5 Error while installing in windows 2008 32 bit

In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
message as " Not enough storage is available to process this commend".
If any one pls give some suggestions as soon as is appreciative.
[email protected]
thanks
Shahul Hameed

Hi,
The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
visit the following link for detailed information:
Misleading error message when you install an update package in Windows
Vista or in Windows Server 2008: "Not enough storage is available to process this command"
Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
Windows Installer 4.5
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

SAP GUI 710 installation with BW 3.5 addon - BW Browser has disappeared

Dear all,
I hope someone can help with a BW 3.50 add-on problem following SAP GUI patching.
I'm doing a local installation of SAP GUI 710 Compilation 3.
I have selected the following three options:
1. SAP GUI for Windows 7.10 (Compilation 3)
2. BW 3.50 Add-On for SAP GUI 7.10
3. Business Explorer
(We require both BW add-ons for version reasons.)
Following this I have applied the SAP GUI Level 13 Patch (gui710_13-10002995.exe).
Up to this point, everything works as expected and I can still see the BW Browser at Start --> Programs --> Business Explorer --> Business Explorer (SAP BW 3.x) --> Browser (SAP BW 3.x)
However, when I apply the BW 3.50 Add-On Level 6 Patch (bw350gui710_6-10004473.exe) the Browser disappears from the menu and I can't locate it anywhere. A reboot wasn't required although I did this anyway with no visible effect.
I did try uninstalling everything and attempted the same process, but with SAP GUI Patch Level 12, and combinations with BW 3.50 Add-On Patch Level 4 but with the same result.
Has anyone else come across this issue, or know what has happened?
Thanks.

We have a similar setup, utilizing all 3 as you do.
Since we are currently at Browser patch 4, eventually headed to patch 6, I threw your situation into our VM enviroment and tested the installation of Browser patch 6. Interesting enough, a clean install of Windows XP, Office 2003, and then GUI 7.10 with patch 13 and Browser 3.5 sp4 works as normal. Once I applied SP6 for the Browser, I still have the icon under the Start menu but the wdbbapp.exe is gone.
Thanks to the VM test enviroment, I was able to recreate the scenario in a few moments and this time prior to installing the patch 6 for the Browser, I set it up to catch all the changes the SAP installer makes when applying sp6.
The installation performed the following activity:
13 files added
4 files deleted
141 files updated
363 registry entries added
522 registry entries deleted
129 registry entries updated
Of the 4 files deleted, one of them is the BEx Browser (wdbbapp.exe) - which is why my shortcut won't work
Of the 13 added, none of them are the file being replaced.
Of the 141 modified, none are this file either.
I am still going through the log but have not seen anywhere it will make a difference if the file is not there.
Again, I am not saying there is a problem, perhaps they changed the way it is accessed, I am not fully up on the process of the BEx Browser. SAP may have something mentioned about it on their GUI/BEx site or a note, this is just my preliminary findings.
Regards,
Zecher

Convert SAP R/3 Database from IBM DB2 to Oracle

Hi. I'm looking for information regarding whether SAP provides any tools to help with the process of converting an instance on a DB2 database to an Oracle database. Did anybody do this before? I would appreciate if you would share your experiences in this area. Thanks!

Hi
Hope this will help u
http://www.oracle.com/technology/software/tech/migration/toolkits/db2/db2_ds.pdf
regards
VInod

Weblogic installation with IBM JDK

Hi,
We are planning to install Oracle Fusion Middleware components 11gR1 (11.1.1.6+) on IBM AIX Power 64 Bit servers. When i checked the certification matrix IBM JDK 7 SR3+ IV33133 is the certified version of JDK for weblogic installation.
Please help me on how to exactly get/download the IBM JDK 7 SR3+ IV33133? I have checked the IBM JDK downloads page and not exactly getting how can we get SR3+ IV33133?
Best Regards,
Kartheek

Hi Prakash,
I guess the '+' sign in the IBM JDK 7 SR3 + IV33133 is bit tricky. I doubt whether it is IBM JDK 7 SR3 added with IV33133.
I have spent quite some time on this JDK installation and got to know that the 3rd party products that are certified to run only on specific versions of IBM's Java for AIX can be downloaded from IBM Java for ISVs download page.
Here are steps that i have followed to download the IBM JDK 7 SR3+ IV33133
1.Go to the IBM Java for ISVs download site at the following URL:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=swg-ibmjavaisv
2.Log in using your IBM ID and password.
3.Enter the associated Access Key MJ3D7TQGMK in the IBM Java for ISVs page
4.Click on submit
5.On the IBM SDK Interim Fixes (iFix) for Oracle page you will see the below JDK versions that are exactly matching the one provided in the certification matrix.
pap6470sr3ifx-20121213_01 (SR3+IV33133)
Java7_64.0.0.61.tar.gz (115 MB)
pap6470sr3ifx-20121213_01 (SR3+IV33133)
pap6470sr3ifx-20121213_01-sdk.tar.Z (184 MB)
6.installed the JDK
Please can you confirm that this procedure is correct?
Best Regards,
Kartheek

SAP 6.0 installation with MCOD

Hi,
Has there been wide spread adoption of MCOD?
Is a SAP deploment with MCOD significantly more challenging and cumbersome to maintain?
Thanks
Gaurav

Hi Gaurav,
Chk the link below:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50a1b7a6-8307-2a10-05bc-d4388cbd4201&overridelayout=true
Rgds,
vishnu

Photoshop CS6 installation with student licensing and moving to Windows 64 bit?

I purchased PS CS6 with student licensing. I was told that I can do two installations (or activations). My question is this: I am currently running Windows 7 32 bit, but I plan to reinstall Windows 7 64 bit later in order to increase my RAM. If I install CS6 now with 32 bit, is it considered a second activation if I reinstall it later under 64 bit, even if it is on the same machine?
Thanks for any information.

You can install the PS CS6 on Windows 7 32 bit and use it , once you have to re-install the Windows 7 64 bit ,
Open Photoshop , Go to Help --> Deactivate
This will deactivate your existing actiavtion and then you can re-install PS on Windows 7 64 Bit , without loosing the activation count.

Problems with Setup.exe LMS3.2 on Window 2008 Enterprise Sp2 32 Bit

Hi,
I have problems installing LMS 3.2. I get the following error during the installation process:
I already deactivated Windows Defender and DEP. After the Error the Installation finishes successfull. You can log in with the given credentials but when you are forwarded to the portal after login the browser shows "Page not Found".
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Problem signature:
Problem Event Name:                        BEX
Application Name:                             setup.exe_InstallShield
Application Version:                           15.0.0.603
Application Timestamp:                     4a030a42
Fault Module Name:                          ErrStack.dll_unloaded
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  4a1c4e04
Exception Offset:                                02ac26a0
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.0.6002.2.2.0.274.10
Locale ID:                                             1033
Additional Information 1:                  b2be
Additional Information 2:                  82109204b3973566ace818217390e302
Additional Information 3:                  9025
Additional Information 4:                  5466bb6e3df7ad4e5cd4fca294d8db3a
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Regards
Mathias

This looks like CSCte84743.
Symptom:
Installation of CiscoWorks LAN Management Solution fails when the installer is trying to configure CiscoWorks Assistant. The error seen will be related to OpsConfUpdate.exe:
The application has failed to start because GGShared.dll was not found. Re-installing the application may fix this problem.
Conditions:
This can occur on Windows 2003 and 2008 servers. The underlying root cause is still not known.
Workaround:
Configure the following registry key value:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer\DisableRollback : DWORD : 0x00000001
Then, a clean installation of LMS should be performed. Once LMS is installed, this registry key value should be removed.
However, the problem with the page not found error could be CSCtb17186. If you try Firefox and get a redirection error, then that would confirm this bug.

Problem with silent install of 11gR1 on Windows 2008

I'm doing a silent install of 11gR1 on Windows Server 2008. It works fine on Windows Server 2003. I have SECURITY_UPDATES_VIA_METALINK set to false, yet it seems to be forcing it to true and then it fails the install because I have an invalid metalink username/password. In the install log I get this, as expected:
INFO: Setting variable 'SECURITY_UPDATES_VIA_METALINK' to 'false'. Received the value from response file.
but then I get this later on:
INFO: Setting the value of SECURITY_UPDATES_VIA_METALINK to true
INFO: Setting variable 'SECURITY_UPDATES_VIA_METALINK' to 'true'. Received the value from a code block.
SEVERE: Invalid MetaLink credentials. Specify the correct e-mail address and password that you use to log in to MetaLink.
INFO: User Selected: Yes/OK
Invalid MetaLink credentials. Specify the correct e-mail address and password that you use to log in to MetaLink.
Why is it forcing this to true? As I said, this same exact response file works fine with Server 2003. Any suggestions?
Oh, also, I've tried forcing the value to false on the command line and by not specifiying a value (because the default is supposedly false).
Thanks in advance

Here is the command line I used on the last attempt:
setup -silent "ACCEPT_LICENSE_AGREEMENT=true" -responseFile C:\database\standard11.rsp -waitforcompletion -nowait
And here is the response file (I had to delete a lot of the comments to get it to fit within the 30000 character limit for this message):
RESPONSEFILE_VERSION=2.2.1.0.0
FROM_LOCATION="../stage/products.xml"
NEXT_SESSION_RESPONSE=<Value Unspecified>
ORACLE_BASE="C:\oracle\"
ORACLE_HOME="C:\oracle\product\11.1.0\db_1\"
ORACLE_HOME_NAME="OraDb11g_home1"
TOPLEVEL_COMPONENT={"oracle.server","11.1.0.7.0"}
DEINSTALL_LIST={"oracle.server","11.1.0.7.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_NODE_SELECTION_PAGE=false
SHOW_SUMMARY_PAGE=false
SHOW_INSTALL_PROGRESS_PAGE=false
SHOW_CONFIG_TOOL_PAGE=false
SHOW_XML_PREREQ_PAGE=false
SHOW_ROOTSH_CONFIRMATION=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
NEXT_SESSION=false
NEXT_SESSION_ON_FAIL=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=false
RESTART_SYSTEM=false
RESTART_REMOTE_SYSTEM=<Value Unspecified>
REMOVE_HOMES=<Value Unspecified>
ORACLE_HOSTNAME=<Value Unspecified>
SHOW_END_OF_INSTALL_MSGS=false
CLUSTER_NODES=<Value Unspecified>
COMPONENT_LANGUAGES={"en"}
INSTALL_TYPE="SE"
n_configurationOption=1
s_ASMSYSPassword=""
s_ASMSYSPasswordAgain=""
n_dbType=1
oracle.assistants.server:s_responseFileName=<Value Unspecified>
s_globalDBName="WLMDB"
s_dbSid="WLMDB"
n_selectedMemoryForOracle=256
n_memoryOption=1
s_dbRetChar="US7ASCII"
b_disableSecureConfig=false
b_loadExampleSchemas=false
b_useDBControl=true
b_receiveEmailNotification=false
s_dlgEMSMTPServer=<Value Unspecified>
s_dlgEMEmailAddress=<Value Unspecified>
s_dlgEMCentralAgentSelected=<Value Unspecified>
n_dbStorageType=1
s_mountPoint="C:\oracle\product\11.1.0\oradata"
b_enableAutoBackup=false
b_useFileSystemForRecovery=true
s_dlgRBORecoveryLocation=<Value Unspecified>
s_dlgRBOUsername=<Value Unspecified>
s_dlgRBOPassword=<Value Unspecified>
s_dlgASMCfgDiskGroupName="DATA"
s_dlgASMCfgDiskDiscoveryString=<Value Unspecified>
n_dlgASMCfgRedundancySelected=<Value Unspecified>
sl_dlgASMCfgSelectableDisks=<Value Unspecified>
sl_dlgASMCfgDiskSelections=<Value Unspecified>
sl_dlgASMDskGrpSelectedGroup={" "," "," "," "}
b_centrallyManageASMInstance=true
b_useSamePassword=true
s_superAdminSamePasswd="*******"
s_superAdminSamePasswdAgain="*******"
sl_superAdminPasswds=<Value Unspecified>
sl_superAdminPasswdsAgain=<Value Unspecified>
METALINK_USERNAME="[email protected]"
METALINK_PASSWORD="aBc124xx"
SECURITY_UPDATES_VIA_METALINK=false
DECLINE_SECURITY_UPDATES=true
COLLECTOR_UPGRADE=<Value Unspecified>
COLLECTOR_IGNORE_CONFIGURATION=<Value Unspecified>
COLLECTOR_IGNORE_FAILURES=<Value Unspecified>
COLLECTOR_USE_OBFUSCATED_PASSWORDS=<Value Unspecified>
COLLECTOR_RESPONSE_FILE=<Value Unspecified>
PROXY_HOST=<Value Unspecified>
PROXY_PORT=<Value Unspecified>
PROXY_USER=<Value Unspecified>
PROXY_PWD=<Value Unspecified>
n_performUpgrade=0
n_upgradeDB=0
s_dbOHSelectedForUpgrade=""
s_dbSIDSelectedForUpgrade=""
n_upgradeASM=0
s_dbSelectedUsesASM="no"
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
sl_upgradableSIDBInstances={}
sl_upgradableRACDBInstances={}
#Name : n_dbSelection
#Datatype : Number
#Description: row selected in the spread table of upgradable DB instances
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
n_dbSelection=0
#Name : b_stateOfUpgradeASMCheckbox
#Datatype : Boolean
#Description: stores the state of checkbox in UI
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
b_stateOfUpgradeASMCheckbox=false
#Name : b_stateOfUpgradeDBCheckbox
#Datatype : Boolean
#Description: stores the state of checkbox in UI
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
b_stateOfUpgradeDBCheckbox=false
#Name : b_oneClick
#Datatype : Boolean
#Description: Governs one-click behavior
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
b_oneClick=false
#Name : s_dlgASMCfgRedundancyValue
#Datatype : String
#Description: Redundancy Value
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgRedundancyValue=""
#Name : s_dlgASMCfgExistingFreeSpace
#Datatype : String
#Description: Existing Free Space
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgExistingFreeSpace="0"
#Name : s_dlgASMCfgNewDisksSize
#Datatype : String
#Description: New Disks Size
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgNewDisksSize=""
#Name : s_dlgASMCfgAdditionalSpaceNeeded
#Datatype : String
#Description: Additional Space Needed for ASM configuration
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgAdditionalSpaceNeeded="0 MB"
#Name : n_configTabSelected
#Datatype : Number
#Description: This determines the config tab selected in UI install.
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
n_configTabSelected=0
#Name : n_dbCharSetOption
#Datatype : Number
#Description: This determines the character set option selected in UI install.
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
n_dbCharSetOption=3

SAP EHP5 MSCS installation with IBM DB2 9.7 on windows 2008 R2

Similar Messages

Maybe you are looking for