SAP Enterprise Connector: omitting parameters like ParameterList.setActive

Hello,
I use the SAP Enterprise Connector and i've got a question:
how can i avoid that the unnecessary optional parameters are requestet during the call, as i could do it with pure JCO.ParameterList.setActive(false).
Thanks,
Gena

Similar Messages

ABAP Sneak Preview SP11 - NWDS:SAP Enterprise Connector error

Hello
I have installed the ABAP 6.4 Sneak Preview SP11 (It works fine with the SAP GUI). I am trying to call Bapis from Java with the help of the proxies generated by "SAP Enterprise Connector". But the problem is that the "SAP Connection Wizard" does not progress any further after providing the R/3 system details(like hostname, sys number, client) and username/pasword. When I click the "Next Button" after providing the correct connection parameters it just stays there.
-->Would the license be a problem. I did not apply for the 90 day license yet, I wanted to do that once everything is working fine.
--> Should I do any additional configuration on the R/3 side.
--> Should I add any extra setting to the environment variable path.
Your help will be greatly apprecaited!!!
Thanks
Yasu

Hello some more information....
I have installed the ABAP 6.4 Sneak Preview SP11 (It works fine with the SAP GUI). I am trying to call Bapis from Java with the help of the proxies generated by "SAP Enterprise Connector". But the problem is that the "SAP Connection Wizard" does not progress any further after providing the R/3 system details(like hostname, sys number, client) and username/pasword. When I click the "Next Button" after providing the correct connection parameters it just stays there.
-->Would the license be a problem. I did not apply for the 90 day license yet, I wanted to do that once everything is working fine.
--> Should I do any additional configuration on the R/3 side.
--> Should I add any extra setting to the environment variable path.
Your help will be greatly apprecaited!!!
Thanks
Yasu

SAP Enterprise Connector Error - NWDS

Hello I have the following issue, I found the same problem in the eariler forums(no solution though) and pasting it here...
the content is copied from /thread/9971 [original link is broken]
Hi
I've installed the sneak edition of the NDS which is a part of the WAS 6.40 sneak preview. Everything seams to work just fine except for the proxy generation in a portal application using the SAP Enterprise Connector tool.(choose new>other>SAP connectivity-->SAP Enterprise Connector) I get to the point where I have to enter connection information's for a single server like Host name, system nr, client, etc...However when everything i filled out and I push next nothing happens. The process line in the bottom shortly fills but the same screen is shown.
Have anyone run into the same problem?
Best Regards
Ole Mose Nielsen
the problem I have is exactly the same. But say if I change the system number to '04' than I get an error - "connect to sap gateway failed".
Thanks,
Yasu

Hello some more information....
I have installed the ABAP 6.4 Sneak Preview SP11 (It works fine with the SAP GUI). I am trying to call Bapis from Java with the help of the proxies generated by "SAP Enterprise Connector". But the problem is that the "SAP Connection Wizard" does not progress any further after providing the R/3 system details(like hostname, sys number, client) and username/pasword. When I click the "Next Button" after providing the correct connection parameters it just stays there.
-->Would the license be a problem. I did not apply for the 90 day license yet, I wanted to do that once everything is working fine.
--> Should I do any additional configuration on the R/3 side.
--> Should I add any extra setting to the environment variable path.
Your help will be greatly apprecaited!!!
Thanks
Yasu

Need help with the SAP Enterprise connector wizard at the NWDS

Hello,
I am trying to create new proxy using the SAP Enterprise connector at the Netweaver Developer Studio.
The problem is that at the 2nd stage I am unable to connect to the server. Can someone please explain me in details:
1. Which tab should I chose there: Load balancing server or single server?
2. Which parameters should I enter there and from where can I take them (uch as System number...)
I tried to enter my server's parameters but I couldn't connect.

Hi Roy,
It depends on what type of R/3 server you are connecting. Usually development & Quality assurance systems for R/3 are not load balanced. You can find it out from your Basis people that server you are connecting is load balanced.
If it is not load balanced then the select the single server and enter the following parameters.
1. Host Name: Server Name (or ip address)
2. System Number: (00)
If it is load balanced then fill out all the information on load balancing tab.
You only need to fill one of the tabs. thank you.

Runtime error while using SAP Enterprise Connector in a J2EE Web Servlet

Hello,
I'm facing problems while trying to do a RFC call out of a Servlet.
I'm using Development Components (DCs) and my project setup is as follows:
Firstly I've created a DC of type J2EE/Web Module. This DC implements an absolutly simple servlet which has to do the RFC-Call.
The relevant code is:
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
 JCO.Client jcoclient = JCO.createClient("010", "DV*****", "***", "DE", "ovd***", "01");
 jcoclient.connect();
 Bapi_Flight_Getlist_Input input = new Bapi_Flight_Getlist_Input();
 input.setAirline("LH");
 SAPProxies_PortType myproxy = new SAPProxies_PortType();
 myproxy.messageSpecifier.setJcoClient(jcoclient);
 try {
 Bapi_Flight_Getlist_Output output = myproxy.bapi_Flight_Getlist(input);
 BapisfldatType_List list = output.get_as_listFlight_List();
 int listsize = list.size();
 for (int i = 0; i < listsize; i++) {
 BapisfldatType elem = list.getBapisfldatType(i);
 response.getWriter().print("Date: " + elem.getArrdate() + '\t' + "Arrive: " + elem.getArrtime());
 } catch (Exception e) {
 response.getWriter().print(e.toString());
 jcoclient.disconnect();
The proxy for the RFC Module "BAPI_FLIGHT_GETLIST" - in this case the classes around "SAPProxies_PortType" were generated by NWDS ("SAP Enterprise Connector" Wizard).
I had to manually add following DCs as "Used DCs" to get my DC built:
com.sap.aii.proxy.framework (default)
com.sap.aii.util.misc (default)
com.sap.mw.jco (default)
So far, so good...
As a J2EE/Web module DC can't be deployed I've created a second DC of type J2EE/Enterprise Application and referenced the first DC. This DC is also built fine and can be deployed.
But... When I call my servlet I get following Error Message on the web browser:
The request cannot be processed.
Details:
com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [LocalDevelopmentservletxxx.com/servlet/TestServlet].
Exception id: [000C295D60FB006F0000003600000EA8000461A05860B4BA]
I also had a look in the trace files:
Vollstu00E4ndiger Nachrichtentext
application [LocalDevelopmentservletxxx.com] Processing HTTP request to servlet [TestServlet] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [LocalDevelopmentservletxxx.com/servlet/TestServlet].
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/aii/proxy/framework/core/AbstractType
Loader Info -
ClassLoader name: [xxx.com/testear]
Parent loader name: [Frame ClassLoader]
References:
 common:service:http;service:servlet_jsp
 service:ejb
 common:service:iiop;service:naming;service:p4;service:ts
 service:jmsconnector
 library:jsse
 library:servlet
 common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
 library:ejb20
 library:j2eeca
 library:jms
 library:opensql
 common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
 interface:resourcecontext_api
 interface:webservices
 interface:cross
 interface:ejbserialization
Resources:
 C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\ibm.com\testear\servlet_jsp\LocalDevelopmentservletxxx.com\work
 C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\ibm.com\testear\servlet_jsp\LocalDevelopmentservletxxx.com\root\WEB-INF\classes
 C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\ibm.com\testear\src.zip
Loading model: {parent,references,local}
The error occurred while trying to load "com.xxx.test.sap.connector.Bapi_Flight_Getlist_Output".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:401)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
at java.lang.Class.getConstructor0(Class.java:1930)
at java.lang.Class.newInstance0(Class.java:278)
at java.lang.Class.newInstance(Class.java:261)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
... 14 more
I think it has something to do with the used DCs... but I don't know why the classes are not found after deployment. I also tried
to package the relevant jar-files from the used DCs into the EAR-File - but the I faced problems with the JCo
Thank you for any help.
Osman

Hi,
One thing that can be helpful is to add the references of the JAR files that you are adding as Used DC in the EAR.
This can be done by adding Library type References in the application-j2ee-engine.xml Deployment descriptor in the EAR project.
Following link will be helpful: http://help.sap.com/saphelp_nw70/helpdata/EN/83/82814282cfc153e10000000a1550b0/content.htm
Regards,
Alka.

EJB Modul: SAP Enterprise Connector, configuring build path

Hello,
first of all I'm using SAP NW CE.
I created an 2 Development Components, an EJB Module and a Enterprise Application(EAR). In the EJB Module I use the SAP Enterprise Connector to generate Java Proxy Classes to do RFC calls.
In the EAR-DC I add in Properties-->J2EE Module Dependencies the needed jar-files. And in the EJB-DC I reference this.
When I don't work with DCs and I create a "normal" EJB and EAR project that is the way it works.
But with DCs I have a problem when I want to build the DC. I have this error:
package com.sap.aii.proxy.framework.core does not exist
So the build-process don't realize the J2EE Module Dependencies. How can I solve this problem?
Regards,
Armin

Did you mean the Development Infrastructure Perspective? If yes I don't find DC -> DC Metadata -> DC Definitino -> Right-click Used DCs -> Add Used DC... if I browse through my DC.
Apart from that I don't want to reference DCs as I write above. I want to reference only jar-files. Because the DCs com.sap.aii.proxy.framework, com.sap.aii.util..misc and com.sap.mw.jco are deprecated. And if I reference DCs I have to use this DCs to use the proxy classes made by the SAP Enterprise Connector. So I want to reference the jar-files where the needed source isn't deprecated.
By the way I use SAP NW CE.

SAP Enterprise Connector and service....

Hi everyone,
After creating, via the plugin "SAP Enterprise Connector", a proxy pointing on a BAPI, how can I create a service for this (and a web service).
I know that you can create a web service directly using ABAP transaction se37. But our SAP version is quite old and we haven't this option.
Thanks for the help.
Message was edited by: David Fryda

HI Jerin,
Can be please little bit elaborate ur scenario.Because Enterprise Connector is deprecated in NWCE 7.1 onwards...

SAP Enterprise Connector and JCo

Hello All,
I have a question.
I wánt to know regarding -->
SAP Connector &
JCo.
Are both of them same ?
Regards,
Deepu.K

hi,
They are different:
SAP Connector : A development tool, that helps classes and RFC function module method calls in Java application.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm
JCO : They are often called as JCO RFC provider service. They offer two types of connection a)TCP/IP b)Through shared memory
http://help.sap.com/saphelp_nw2004s/helpdata/en/83/85343e8c7f6329e10000000a114084/frameset.htm
(soon my blog on SAP Enterprise connector will be published)
hope it helps'
regards

Creating a WEB Service for SAP enterprise connector

Hi,
I am using the SAP enterprise connector plugin for Netweaver 04.
It generated me all the classes that I need for the BAPI.
It also generated me a Proxy class.
I want to create a service.
This is what I've done :
1) create a portal service.
2) create a methode in the service :
public Bapi_Companycode_Getdetail_Output execute_BAPI_COMPANYCODE_GETDETAIL(
Bapi_Companycode_Getdetail_Input arg1)
try {
return new MyProxy_PortType().bapi_Companycode_Getdetail (arg1);
} catch (Exception e) {
return null;
3) after I created a web service from the portal service.
Is it the right way ?
Thanks a lot.

Hi Marcin and everyone,
Thanks for the precious explanations.
I created a client and I have an exception.
1) I made a portal service from wsdl - client side.
2) I created a DynPage.
3) Here is the code :
IMyBAPI4Service client = (IMyBAPI4Service) PortalRuntime.getRuntimeResources().getService(
IMyBAPI4Service.KEY);
IMyBAPI4Service securedClient = (IMyBAPI4Service) client.getSecurisedServiceConnection( request.getUser());
//this is null.
if (securedClient.getURLEndPoint().getURL() == null) {
securedClient.setURLEndPoint(new URLEndpoint("http://<server>:<port>/irj/servlet/prt/soap/com.sap.portal.prt.soap.MyBAPI4Service?style=doc_lit"));
Bapi_Companycode_Getdetail_Input importParams = new Bapi_Companycode_Getdetail_Input();
importParams.setCompanycodeid("0500");
Bapi_Companycode_Getdetail_Output exportParams = null;
securedClient.execute_BAPI_COMPANYCODE_GETDETAIL(importParams);
Do I have to use a secured client ? What is it ?
The exception is :
Problem at execution: SOAP Fault Error (java.lang.NoClassDefFoundError) : java.lang.NoClassDefFoundError
Thanks Marcin....
Message was edited by: David Fryda

SAP Enterprise Connector

Hi Experts
I tried generating Proxy classes for first time for FlightAppList using SAP Enterprise connector by selecting Single Server option, I have installed SAP Management Console on the system having host name 'sap-server', the details i provided was as follows:
HostName:'sap-server'
System Number: 00
SAP Router:
User Account
Client : 001
LogonName: pradeep
Password: password
Language:ENG
but i get the error as
Connect to SAP failed
Error: Partner not reached
Do i need to do any settings on SAP Netweaver console.
Kindly let me know.

Configuring webasabap needs SAP security library which can be downloaded at sap market place, but it needs a license username password which i dont have.
I have only downloaded the trial version "SAPNW2004sJavaSP9_Trial" is there a way i can connect my java program to SAP database without having any license?

Documentation of SAP default BSP url parameters

Hi,
I'm looking for a documentation on the SAP default BSP url parameters like
- sap-syscmd
- sap-sessioncmd
- sap-params
I already used some of them but am not quite sure whether there aren't any more to help me solving tricky problems.
Is there any list of all parameters including their meaning and examples for usage?
Thanks & regards
Wolfgang

I don't think you have listed the commands for sap-syscmd. These look like the ones for sap-sessioncmd.
The following was taken from page 94 of Advanced BSP Programming:
SAP-SYSCMD: The only value supported is nocookie. This tells the BSP runtime to mangle the session ID into the URL and not use a cookie for handling the session id. This is especially required when the same stateful application must be run multiple times in situations where session ids in coookies would have resulted in all applications mapping ont the same session.
SAP-SESSIONCMD: The parameter sends actions to the session managemer:
open - starts a new session
close or logoff - ends the current application and redirects the browser to the URL supplied by the parameter SAP-EXITURL.
cancel - is similar to close, but already handled by ICM.
usr_abort and usr_close - is used by the portal to control BSP sessions.
It is interesting that the posting by Guillaume Garcia matches the text from the BSP book exactly. I referenced my source, did you?

Calling an RFC from an EJB over an Enterprise Connector

Hi all,
I would like to call an RFC enabled Function Modul (FuBa) from a BW-System over an EJB in a Web AS environment bei passing SAP Logon Ticket.
To achive this goal, i've generated proxy classes (Enterprise Connector) via NWDS .
If i call enterprise connector localy from an example class (See attachment), it works.
BUT
if I use the same Code within an EJB, bei correct deployment , it doesn't work. I become an exception, during to establish a connection
What is wrong here ?
What do i have to do in an a EJB-Environment to use an Enterprise Connector ?
Best Regards
A. Büyükyilmaz
ATTACHMENT
Created on 13.02.2007
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package de.xxx.test.ep.main;
import java.sql.Date;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import com.sap.aii.proxy.framework.core.ApplicationFaultException;
import com.sap.aii.proxy.framework.core.SystemFaultException;
import com.sap.mw.jco.JCO;
import de.xxx.yyy.zzz.connectivity.fuba.Anlage_PortType;
import de.xxx.yyy.zzz.connectivity.fuba.Zge_Gerel_Data_For_Kne_Kn_Input;
import de.xxx.yyy.zzz.connectivity.fuba.Zge_Gerel_Data_For_Kne_Kn_Output;
@author pg4011
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class GetAnlage {
private JCO.Client mConnection = null;
public boolean connectToSAP(
String client,
String user,
String passwd,
String lang,
String appServer,
String sysNo) {
try {
mConnection =
JCO.createClient(client, user, passwd, lang, appServer, sysNo);
mConnection.connect();
} catch (Exception e) {
e.printStackTrace();
return false;
return true;
public static void main(String[] args) {
GetAnlage anlage = new GetAnlage();
if (anlage.connectToSAP ("50", "abc", "pwd", "DE", "system", "00")) {
System.out.println("Anlage wird erstellt");
anlage.getData();
System.out.println("");
System.exit(0);
private void getData() {
// ImportParameter
Zge_Gerel_Data_For_Kne_Kn_Input input = new Zge_Gerel_Data_For_Kne_Kn_Input();
// Hole proxy Instance mit JCO.Client instance
Anlage_PortType proxy = new Anlage_PortType();
proxy.messageSpecifier.setJcoClient(mConnection);
Zge_Gerel_Data_For_Kne_Kn_Output output = new Zge_Gerel_Data_For_Kne_Kn_Output();
input.setI_Bp_Nr("7901514764");
input.setI_View("03");
input.setI_Spras("DE");
Date stichtag = new Date(2006, 9, 22);
input.setI_Stichtag(stichtag);
//Rufe RFC auf
try {
output = proxy.zge_Gerel_Data_For_Kne_Kn(input);
String s = "";
System.out.println(s);
} catch (SystemFaultException e) {
e.printStackTrace();
} catch (ApplicationFaultException e) {
e.printStackTrace();

Hi Rajesh,
it's realy funny. Although, i inserted som trace outputs behind of catch-statement, i do not see any information about exception in application log.
but i see, that the method becomes correct inputparameters and i see it try to make a connection. After that, it end without a trace.
Best Regards
Ahmet

How to HTTP POST data to SAP Business Connector

Hello,
I would like to transfer data from a client with HTTP POST to SAP Business Connector. SAP BC acts as server. In SAP BC I created a Java service containing the code:
IDataCursor idatacursor = pipeline.getCursor();
idatacursor.first("node");
Object obj1 = idatacursor.getValue();
System.out.println(obj1.toString()); //for test
But how can I access the data that was sent with HTTP POST in my service?
Thank you
Piotr Dudzik

Hi,
quite easy:
StringBuffer buffer = new StringBuffer();
String resultString = null;
String xmlString = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"+
 "<biztalk_1 xmlns=\"urn:biztalk-org:biztalk:biztalk_1\">"+
 "<header>"+
 "<delivery>"+
 "<to>"+
"<address>urn:sap-com:logical-system:XXX</address>"+
 "</to>"+
 "<from>"+
"<address>urn:sap-com:logical-system:YYY</address>"+
 "</from>"+
 "</delivery>"+
 "</header>"+
 "<body>"+
 "<doc:Z_RFC_CALL_NAME> xmlns:doc=\"urn:sap-com:document:sap:rfc:functions\" xmlns=\"\">"+
 ... [PARAMETERS]
 "</doc:Z_RFC_CALL_NAME>"+
 "</body>"+
 "</biztalk_1>";
 try {
 URL url = new URL(SCHEMA, this.host, Integer.parseInt(PORT), FILE);
 HttpURLConnection connection = (HttpURLConnection)url.openConnection();
 initConnection(connection);
 OutputStream out = connection.getOutputStream();
 out.write(xmlString.getBytes());
 out.close();
 InputStream reader = connection.getInputStream();
 char ch;
 while((ch = (char)reader.read()) != -1 && ch != 0xFFFF)
 buffer.append(ch);
 resultString = buffer.toString();
 if (this.getXMLEntry(resultString, "E_STATUS").equals("E")) { // ERROR
 System.out.println("errormessage: "+this.getXMLEntry(resultString, "E_EMSG"));
 } else {
 // ok, is supose this is an S (success), parse the stuff
 reader.close();
 catch (Exception e){
 e.printStackTrace();
 System.out.println(e);

SAP Enterprise Services Explorer License key

Hello,
How can I obtain a license key for the SAP Enterprise Services Explorer for Microsoft .NET ?
There was a message stating that it was a 90 day trial version when I downloaded the installation file.
We do have a license for SAP NetWeaver CE 7.2; but I can't find where to download a version that it's not trial or get a proper license key
(SAP Support Portal / Downloads / SAP Connectors or Keys and Requests)
Also I'd like to know what's the process to apply this license? It's my understanding that it only applies to the development machine. Is this assumption correct ?
Thank you!

Hi Henry,
no problem. for a step by step approach. see this link
https://www.sdn.sap.com/irj/sdn/soa-modeling?rid=/library/uuid/10cacdca-b0bb-2a10-77be-d600de4658b7
Enterprise Services Repository&Registry - 60k
https://boc.sdn.sap.com/node/18912
http://blogs.microsoft.co.il/blogs/tamir/archive/tags/download/default.aspx
thanks
sagar
reward me points if usefull

Verify SAP HR connector connection with SAP Target system - OIM 11.1.2

Hi All,
We are using SAP ER 9.1.2 connector and configured as follows,
1) Installed SAP ER connector from Admin console (In oim db Common.jar, SAPCommon.jar and SAPER.jar files are created)
2) The connector guide says to copy sapjco3.jar and sapidoc3.jar shud be placed into Oracle_home/Xellerate/ThirdParty folder. As we r using OIM 11.1.2 placed it in Oracle_IDM1/server/ThirdParty folder. Also Uploaded Thirdparty file into oim db using UploadJars.sh.
3) copied libsapjco3.so file into /usr/local/jco directory and added the same path to LD_LIBRARY_PATH environment varialble
4) Restarted OIM server
5) To check if SAPJCo is correctly installed, ran below command
java –jar JCO_DIRECTORY/sapjco3.jar
java –classpath JCO_DIRECTORY/sapjco3.jar com.sap.conn.jco.rt.About
Doubt: In OIM 11.1.2 we upload files into oim db. So, how does running files in ThirdParty folder verifies SAPJCo installation.
6) Configured SAP HR IT resource parameters as given by our SAP application team.
7) Now Ran "SAP HRMS Employee Type Recon" scheduled job and facing below error,
     "oracle.iam.connectors.sap.common.util.SAPUtil : getJCOFunction() : Connect to message server host failed[[
     Connection parameters: TYPE=B DEST=10.60.1.83 MSHOST=FUSION-ECCQA.hdfcsldm.com GROUP=PUBLIC R3NAME=FPQ PCS=1
     ERROR service 'sapmsFPQ' unknown
     TIME Tue Apr 16 18:20:20 2013
     RELEASE 720
     COMPONENT NI (network interface)
     VERSION 40
     RC -3
     MODULE niuxi.c
     LINE 1814
     DETAIL NiPGetServByName: 'sapmsFPQ' not found
     SYSTEM CALL getaddrinfo
     COUNTER 1 "
Please help me in configuring SAP connector
Thanks in advance

Hi.
Have you solved this? I'm getting the same error and documentation is not clear.
It says to add an entry to /etc/service (in my case there's a service using the same tcp port) and the copy a .ini file to "root" directory, which I understand is "/" in a linux system.
Thank you.
Alex

SAP Enterprise Connector: omitting parameters like ParameterList.setActive

Similar Messages

Maybe you are looking for