SAP Enterprise Extension HR Patches

HI Folks,
We are planning to upgrade Patches for SAP_HR, while upgrading, we found patches called as
SAP Enterprise Extension HR, is it Related to CORE Hr, do we need to apply these patches.
Experts Plz advice.
Regards,
Sekar.

Hi Guys
Where or not you require EA_HR depends on what HR products you plan to use, you need to check the release notes and pre-reqs of the HR functionality you plan to use
The following link gives you an overview of the core EA_HR functions
- there maybe however be re-use of EA_HR functions by other HR products
http://help.sap.com/saphelp_erp60/helpdata/EN/44/4541e0bc511193e10000000a155369/frameset.htm
EA_HR may also be a pre-req to activate other business functions in SFW5 - eg HCM Process and Forms
Best regards
Stuart

Similar Messages

Activated SAP ECC Enterprise Extension PLM.

Dear Expert,
From where i can activate SAP ECC Enterprise Extension PLM. my problem is i am unable to see document browser tab while editing documet. i have already activated document browser flag (Tcode DCSWITCH).
Bhuwan
Edited by: tbhuwan.kaar on May 9, 2009 3:15 PM

Done by Basis People.

Version of SAP 4.7 Enterprise extension set

Dear all,
How can I get the version of my SAP 4.7 enterprise extension set?
Best regards.
Nozome.

Hi Nozome,
Goto System - > Status
On block "SAP System DATA" click on components .
Here you will see software components SAP_BASIS SAP_ABA.
Just see the release of EA-APPL. The release will be your extension set. It will be either 110(1.1) or 200(2) . I guess this is what you are looking for.
Cheers

Performance issue of BI Reports in SAP Enterprise portal -in SAPNW2004s

Dear friends,
We are integrating BI Reports in SAP Enterprise Portal 7.0 ( SAP NW- 2004s).The reports are running properly .But the issue here is reports are taking long time to open and leading it to performance effect.
Reports in BEX( Bi side) working lilttle better than EP platform.
And Even BI team is looking for ways to improve the performance.
Could you please share your ideas to implement in portal side to increase the performance.
Thanks and Regards
Ratnakar Reddy

Hello Mr. Reddy,
There are two possibilities for slow performance in BW reports, so we need to look into wether its slow in the BW system or at the frontend.
If the problem resides in the BW system then we should be able to trace the reports
and you can go for a SAP EW or GV sessin and SAP will provide recommendations.
If the problem resides at the frontend
Update the frontend servers to the latest frontend release.
Recommended Frontend Release 700
Recommended Frontend Patch 18
Update the frontend servers to the lates SAP GUI release as soon as possible.
Minimum Recommended SAP GUI Release 6.40
Your frontend PCs should fulfill the following requirements:
Each frontend PC should have 500 MHz and 128 MB main memory.
Because of a limit in the addressable memory, Windows 95 is not supported as Frontend OS for 3.X BW Systems. Please refer to SAP Notes 161993, 321973 and 366626 for details.
Please also check SAP Note 147519 "Maintenance strategy/ deadlines 'SAPGUI'".
If you still require any assistance from SAP support then raise a message under component ( probably BW-BEX-ET-WEB).
Provide your input, if you have any.
Thank you,
Tilak

What's the difference between R/3 Enterprise extension set 1.10 and 2.00 ?

Hi there,
Anyone know how to find the difference between 47x110 and 47x200. I want to install the new IDES R3 which is 47x200 (I found some program/source that I need in this version). But our PRD system is 47x110.
thanks in advance,
Doris

Hi Doris
SAP R/3 Enterprise Core has been assigned the release number
4.70. This signifies its similarity to SAP R/3 4.6C and indicates
that the core can be independently upgraded and maintained.
SAP R/3 Enterprise Extensions are selectively deployable and
have their own release cycles. The name of each SAP R/3 Enterprise Extension reflects its relevant application area.
e.g.
SAP R/3 Enterprise Extension Set 1.10 includes HR,SCM and Fin modules
SAP R/3 Enterprise Extension Set 2.00 includes all above and additionaly PLM module.
Award points if Helpful
Regards
Umesh

SAP Enterprise project connection and Primavera

Hi, has anyone worked on interfacing SAP ECC and Primavera P6 using SAP EPC Add on. Need some guide on how to!!

Hi,
Instguide for epc 2.0 sp 04
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000094598&_SCENARIO=01100035870000000202&
Rin Note:
1993495 -
RIN für SAP Enterprise Project Connection 2.0 mit Patch 04 für SP02
PAM:
https://websmp102.sap-ag.de/~sapidb/011000358700000103362012E
br
Julius

SAP Enterprise Modeling Applications by IDS Scheer (ARIS)

Hi,
Does anyone know where to find the temporary license key for SAP Enterprise Modeling by IDS Scheer?
The documentation in the Service Marketplace directs you to the "download scope" - however I cannot find anything in the download software or in the download license keys areas of the Service Marketplace.
Thanks

IDS Scheer's ARIS (offered also by SAP as "Enterprise Modeling Applications") let's you create, communicate and maintain conceptual models of your organizations processes. They primary serve as 'live' documentation and focus on high level, company wide processes (e.g. "the procurement process").
NetWeaver BPM and the included process composer tool let's you model executable process extensions to SAP applications and run them as composite applications. You would use them to e.g. implement approval, collaboration, exception management, workflow etc.
Now both modelers work with "boxes and arrows" type of models, but their intent is different and they're usually applied by different people for different purposes.

SAP Enterprise modelling by IDS Scheer vs. Visual/ Process composer

Hi,
This might sound very basic question. But Can anybody tell me what is the difference between SAP Enterprise modelling tool by IDS Scheer and Process Composer in NetWeaver. As far as my understanding, both are used for process modelling.
Thanks,
Tripti

IDS Scheer's ARIS (offered also by SAP as "Enterprise Modeling Applications") let's you create, communicate and maintain conceptual models of your organizations processes. They primary serve as 'live' documentation and focus on high level, company wide processes (e.g. "the procurement process").
NetWeaver BPM and the included process composer tool let's you model executable process extensions to SAP applications and run them as composite applications. You would use them to e.g. implement approval, collaboration, exception management, workflow etc.
Now both modelers work with "boxes and arrows" type of models, but their intent is different and they're usually applied by different people for different purposes.

SAP Enterprise Modelling by IDS Scheer - Component name

Does anyone know the software component name that includes Add-on for SAP Enterprise Modelling by IDS Scheer ?
I am trying to figure out if we have this add-on activated or not...
Thanks
Elena

IDS Scheer's ARIS (offered also by SAP as "Enterprise Modeling Applications") let's you create, communicate and maintain conceptual models of your organizations processes. They primary serve as 'live' documentation and focus on high level, company wide processes (e.g. "the procurement process").
NetWeaver BPM and the included process composer tool let's you model executable process extensions to SAP applications and run them as composite applications. You would use them to e.g. implement approval, collaboration, exception management, workflow etc.
Now both modelers work with "boxes and arrows" type of models, but their intent is different and they're usually applied by different people for different purposes.

Deactivate the Enterprise Extensions (EA-FIN )

Can anyone tell me how to deactivate the Enterprise Extensions (EA-FIN ) in the IMG for ECC 6.0(SPRO), in present scenario EA-FIN is a ON mode but we want to change on OFF mode .

Hi Joseph Francis
Thanks for replay
But some more detailed pathi want for deactivate the Enterprise Extensions (EA_FIN).
This path is right
spro---display reference IMG -
execute SAP ECC extensions -
environment ---switches
If its right tell me the next step .
If its wrong please tell the detailed path

Configure SSO Connection from SAP Enterprise Portal to BOE Server

Hi Guys,
We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
SAP EP with AD Authentication
SAP EP configured with SNC to SAP BI7 system
SAP BOE XI 3.1 - SAP Integration Kit
BOE Server configured with SAP Authentication via SAP BI7 System
We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
Let me know if this is at all possible

Hi,
You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
For more details check BOXI Admin guide and SAP Integration Guide.
Thanks,
Muhammad

Performance issue of BI reports in SAP Enterprise portal

Dear Friends,
We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect.
In Bex ( BI side) reports performance is little better than SAP EP platform. BI Team also looking for ways to improve performance at BI side.
Could you please share your valuable ideas to improve the performance at SAP EP side also ..
Thanks and Regards
Ratnakar Reddy

Hi ratnakar,
The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
Hope this helps.

Runtime error while using SAP Enterprise Connector in a J2EE Web Servlet

Hello,
I'm facing problems while trying to do a RFC call out of a Servlet.
I'm using Development Components (DCs) and my project setup is as follows:
Firstly I've created a DC of type J2EE/Web Module. This DC implements an absolutly simple servlet which has to do the RFC-Call.
The relevant code is:
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
   JCO.Client jcoclient = JCO.createClient("010", "DV*****", "***", "DE", "ovd***", "01");
   jcoclient.connect();
   Bapi_Flight_Getlist_Input input = new Bapi_Flight_Getlist_Input();
   input.setAirline("LH");
   SAPProxies_PortType myproxy = new SAPProxies_PortType();
   myproxy.messageSpecifier.setJcoClient(jcoclient);
   try {
      Bapi_Flight_Getlist_Output output = myproxy.bapi_Flight_Getlist(input);
      BapisfldatType_List list = output.get_as_listFlight_List();
      int listsize = list.size();
      for (int i = 0; i < listsize; i++) {
         BapisfldatType elem = list.getBapisfldatType(i);
         response.getWriter().print("Date: " + elem.getArrdate() + '\t' + "Arrive: " + elem.getArrtime());
   } catch (Exception e) {
      response.getWriter().print(e.toString());
   jcoclient.disconnect();
The proxy for the RFC Module "BAPI_FLIGHT_GETLIST" - in this case the classes around "SAPProxies_PortType" were generated by NWDS ("SAP Enterprise Connector" Wizard).
I had to manually add following DCs as "Used DCs" to get my DC built:
com.sap.aii.proxy.framework (default)
com.sap.aii.util.misc (default)
com.sap.mw.jco (default)
So far, so good...
As a J2EE/Web module DC can't be deployed I've created a second DC of type J2EE/Enterprise Application and referenced the first DC. This DC is also built fine and can be deployed.
But... When I call my servlet I get following Error Message on the web browser:
The request cannot be processed.
Details:
com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [LocalDevelopmentservletxxx.com/servlet/TestServlet].
Exception id: [000C295D60FB006F0000003600000EA8000461A05860B4BA]
I also had a look in the trace files:
Vollstu00E4ndiger Nachrichtentext
application [LocalDevelopmentservletxxx.com] Processing HTTP request to servlet [TestServlet] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [LocalDevelopmentservletxxx.com/servlet/TestServlet].
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/aii/proxy/framework/core/AbstractType
Loader Info -
ClassLoader name: [xxx.com/testear]
Parent loader name: [Frame ClassLoader]
References:
   common:service:http;service:servlet_jsp
   service:ejb
   common:service:iiop;service:naming;service:p4;service:ts
   service:jmsconnector
   library:jsse
   library:servlet
   common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
   library:ejb20
   library:j2eeca
   library:jms
   library:opensql
   common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
   interface:resourcecontext_api
   interface:webservices
   interface:cross
   interface:ejbserialization
Resources:
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\ibm.com\testear\servlet_jsp\LocalDevelopmentservletxxx.com\work
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\ibm.com\testear\servlet_jsp\LocalDevelopmentservletxxx.com\root\WEB-INF\classes
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\ibm.com\testear\src.zip
Loading model: {parent,references,local}
The error occurred while trying to load "com.xxx.test.sap.connector.Bapi_Flight_Getlist_Output".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:401)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
at java.lang.Class.getConstructor0(Class.java:1930)
at java.lang.Class.newInstance0(Class.java:278)
at java.lang.Class.newInstance(Class.java:261)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
... 14 more
I think it has something to do with the used DCs... but I don't know why the classes are not found after deployment. I also tried
to package the relevant jar-files from the used DCs into the EAR-File - but the I faced problems with the JCo
Thank you for any help.
Osman

Hi,
One thing that can be helpful is to add the references of the JAR files that you are adding as Used DC in the EAR.
This can be done by adding Library type References in the application-j2ee-engine.xml Deployment descriptor in the EAR project.
Following link will be helpful: http://help.sap.com/saphelp_nw70/helpdata/EN/83/82814282cfc153e10000000a1550b0/content.htm
Regards,
Alka.

Is there User Group and Role Reporting in SAP Enterprise Portal?

I want to know if there is a way to pull users statistics our of SAP Enterprise Portal like you can out of the R3 backend systems.
I would like functionality similar to the SUIM transaction. I know through user administration you can access any user, even a list of all users, and you can do similar lists with roles and groups. You can then access any of these things individually and look at their assignments. However, I want to do this on a large scale. I want to know for example every group that has a user assigned to it. Evergroup that has roles assigned to it. Or groups that have no user or role assignments. We have approximately 1904 groups in our Production Portal system and I am trying to clean up the groups that have no user assignment, but I don't want to look through them one by one.

Hi Chris,
There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
For a sample code you which i wrote some time back, you might refer:
http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
Thanks
Prashant

Two sap enterprise portal in the same server

Hi,
We have installed a SAP Enterprise Portal on a linux server, all ok!!. but now we want to install another SAP Portal in the same server with the same ehp and same sp, but diferent url, is it possible? and we have something in mind when we began to install it..
e.g. diferents ports or diferents database SID to avoid errors.
thankssss

Hi Carlos,
SAP Software in general is flexible regarding this requirement.
A SAP ID identifies the system, and the Instance ID is related to the Portnumbers that are used...
So lets say you have an:
- host called "linuxhost1" and
   - you installed a SAP system "AB1" and
      - the CI is 00 and SCS is 01
then you can install multiple additional installations for example
- host called "linuxhost1" and
   - you installed a SAP system "AB2" and
      - the CI is 02 and SCS is 03
etc etc..
As long as your host has enough resources you can fill it up...
The instance numbers you chose are reflected in the portnumbers. So in my example above the AB1 portal is called by http://linuxhost1:50000 and AB2 portal is called by http://linuxhost1:50200...
So in other words the instance number of the CI is used in the portnumber of the java instance (5NN00).
The above info is also spread among different SAP installation guides, and SAP help pages.
Cheers,
B

SAP Enterprise Extension HR Patches

Similar Messages

Maybe you are looking for