SAP Enterprise Services: Configuration Date

I need the configuration dates for SAP Enterprise Services.
Case: my team of APO BPXs has done an analysis of available SAP Enterprise Services using ES Workplace on March 4th. and 5th. But there was the update of APO from 5.0 to 7.0. Therefore I need the following information:
- Did my APO group use APO/SCM 5.0 or 7.0 on March 4th. and 5th.? (Where is the history of updates on SAP Servers, in particular on HU08).
- Where can I find a comprehensive list of the available SAP Enterprise Web Services with:
Date WS Configured (so my BPX can review and check only the new WSs. This is a paramount in order to recommend updates on existing SOA applications that use "home made" web services?)
Thanks a lot,
Hugo

Hi Henry,
no problem. for a step by step approach. see this link
https://www.sdn.sap.com/irj/sdn/soa-modeling?rid=/library/uuid/10cacdca-b0bb-2a10-77be-d600de4658b7
Enterprise Services Repository&Registry - 60k
https://boc.sdn.sap.com/node/18912
http://blogs.microsoft.co.il/blogs/tamir/archive/tags/download/default.aspx
thanks
sagar
reward me points if usefull

Similar Messages

SAP Enterprise Service Explorer 1.0 - Problem

Hi all,
i have installed the following:
Visual Studio 2005
SAP Enterprise Service Explorer 1.0
Configuration:
I'm not sure what's the right service registry url? I used http://<server>:<port>/sr
Basic Authentication
no proxy
Error:
Cannot connect to Service Registry. Make sure the URL and/or proxy values are valid
Any ideas?
regards
Edited by: Wolfgang Bauer on Jun 5, 2008 7:57 AM

Hi,
what about the service url?
I tested the following:
<server>:<port>/ESRegistryWS/BasicAuthConfig?wsdl&style=document&mode=standard
<server>:<port>/ServicesRegistrySiService/ServicesRegistrySiPort?wsdl&mode=ws_policy
Do i have to specify the server as ip address?
I have tested the services in WSNavigator successfully.
But in VS2005 nothing is working.
Error without proxy:
Cannot connect to the Service Registry. Make sure that all login parameters are valid.
Error with proxy:
Cannot connect to the Service Registry. Make sure the URL and/or proxy values are valid.
Without proxy sounds better because it seems that the system checks the user and password. But my user and password are not running in that configuration.
Via URL in the browser i have no problem to login to the service registry.
regards
regards

Error in Enhancing the Standard SAP Enterprise Service

Hi All,
I have enhanced standard SAP Enterprise service, when i am going to test in wsnavigator , I am facing the below problem..
ERROR : Definition of /wsdl:definitions/wsdl:types/xsd:schema[1]/xsd:attributeGroup/xsd:attribute is not correct. Missing top level component (uri: 'http://in.ibm.com/o2s'; name: 'MaterialSerialNumberCollection')."
Please help.
Thanks in advance.
Biplab Ray

Hello,
It looks like there is a syntax issue in your web service definition. Please correct this (SE80) and reactivate the service definition.
Thanks,
Venu

Significance of Message header in SAP Enterprise Service

Hi All,
What is the significance of the MessageHeader in an SAP Enterprise Service?
regards,
Piyush

Hi Pisyush.
Are you talking aboiut PI message Header or Enterprise Service Header??
Messahe Header hold the information about Basic details like to Identify the service.
If you are trying to call one enterprise service from one application it could be Composite application or VC or NWDS using some proxy class or what ever.you give the message header details in proxyy class,so it direclty make a call to Enterprise Service.
it is my understanding.
Regards,
RAJ

SAP Enterprise Service Explorer for Visual Studio 2008

Hi all,
is there a version for SAP Enterprise Service Explorer for Visual Studio 2008?
I have found to fix the localization error.
[http://blogs.microsoft.co.il/blogs/tamir/archive/2008/03/13/localization-fix-for-sap-esa-explorer-for-visual-studio.aspx]
But if i run the exe-file --> You have not a compatible version of VS Studio installed.
regards

Hi,
there will be a new version of the ESE plugin available with the new CE 7.1.1.
regards

SAP Enterprise Services Explorer Webcast on MSDN - Presentation Time

Hi All,
Please pay attention that the ESE Webcast presentation is today 11.03.2008 on 15:00 GMT time.
(due to daylight saving changes on pacific time some invitations were set to 16:00 GMT time)
Attendee Registration URL:
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032371999&Culture=en-US
Regards,
Nadav

Hi Asen,
you can find documentation and code examples how to consume SAP eSOA services using SAP Enterprise Services Explorer for MSFT .NET in the following areas:
1. Open SAP Enterprise Services Explorer for MSFT .NET in your VS .NET and press F1 for help. you will get a fully documented guide for using the tools, plus code examplse
2. you can use the following article published by Rima:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0499da5-73c4-2b10-f580-91c1f17008c0
3. you can find more infromation in the .NET interoperability area in the SDN:
http://www.sdn.sap.com/irj/sdn/dotnet
Regards,
Nadav

Question about SAP Enterprise Services Explorer 1.1

Hi ,
    1. I use dotnet connector before and now someone told me that I can use SAP Enterprise Services Explorer 1.1
        but when I download this app, it says '90 day evaluation ';
        what about after 90 days?
    2. another questions, our warehouse will perform a WTS<Warranty Tracking System> which needs scan some barcode,
        and our scanner's OS is Windows Mobile 5.0 which<Model:intermec 700C> can be developed in VS 2005.
       my question is can I develop a windows mobile application with using SAP Enterprise Services Explorer 1.1?

From a mobile PC application you can connect only webservice or you should have to develop you own RFC connector from zero.
the architecture I use for Pocket PC is some webservices hosted in a .net webserver. The pocket PC connects the .net webserver and my webserver used a RFC proxy. My RFC proxy is built with SAP .net connector, JCo, or Erp connect, a .net api for sap developped by a great guy ... [http://www.theobald-software.com/oe/cms/website.php?id=/en/index/products/erpconnect.htm|http://www.theobald-software.com/oe/cms/website.php?id=/en/index/products/erpconnect.htm]

SAP Enterprise Services Explorer License key

Hello,
How can I obtain a license key for the SAP Enterprise Services Explorer for Microsoft .NET ?
There was a message stating that it was a 90 day trial version when I downloaded the installation file.
We do have a license for SAP NetWeaver CE 7.2; but I can't find where to download a version that it's not trial or get a proper license key
(SAP Support Portal / Downloads / SAP Connectors or Keys and Requests)
Also I'd like to know what's the process to apply this license? It's my understanding that it only applies to the development machine. Is this assumption correct ?
Thank you!

Hi Henry,
no problem. for a step by step approach. see this link
https://www.sdn.sap.com/irj/sdn/soa-modeling?rid=/library/uuid/10cacdca-b0bb-2a10-77be-d600de4658b7
Enterprise Services Repository&Registry - 60k
https://boc.sdn.sap.com/node/18912
http://blogs.microsoft.co.il/blogs/tamir/archive/tags/download/default.aspx
thanks
sagar
reward me points if usefull

EJB Modul: SAP Enterprise Connector, configuring build path

Hello,
first of all I'm using SAP NW CE.
I created an 2 Development Components, an EJB Module and a Enterprise Application(EAR). In the EJB Module I use the SAP Enterprise Connector to generate Java Proxy Classes to do RFC calls.
In the EAR-DC I add in Properties-->J2EE Module Dependencies the needed jar-files. And in the EJB-DC I reference this.
When I don't work with DCs and I create a "normal" EJB and EAR project that is the way it works.
But with DCs I have a problem when I want to build the DC. I have this error:
package com.sap.aii.proxy.framework.core does not exist
So the build-process don't realize the J2EE Module Dependencies. How can I solve this problem?
Regards,
Armin

Did you mean the Development Infrastructure Perspective? If yes I don't find DC -> DC Metadata -> DC Definitino -> Right-click Used DCs -> Add Used DC... if I browse through my DC.
Apart from that I don't want to reference DCs as I write above. I want to reference only jar-files. Because the DCs com.sap.aii.proxy.framework, com.sap.aii.util..misc and com.sap.mw.jco are deprecated. And if I reference DCs I have to use this DCs to use the proxy classes made by the SAP Enterprise Connector. So I want to reference the jar-files where the needed source isn't deprecated.
By the way I use SAP NW CE.

SAP Enterprise Service - Cast Exception

Hi folks,
I'm currently working on a project to implement a project that consumes an SAP web service, but I've come across an error that I'm finding difficult to solve. Composing an independent project I'm able to successfully consume the web service. However, when I transfer the same code to the main project, using the same steps to add a web reference in visual studio 2005, I get an InvalidCastException when the service is called:
ERROR: System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidCastException: Unable to cast object of type 'N.SAP.SAPSPProcessor.com.sap.esworkplace.erp.EmplERPSimplElmntsQryMsg_s' to type 'N.SAP.SAPSPProcessor.com.sap.esworkplace.erp.EmplERPSimplElmntsQryMsg_s'.
The proxy code in Reference.cs is the same in both instances, and I've made sure the web.config in the new project has the correct settings. Does anyone have an idea of what may be going on? Or has anyone encountered this error before? Any help is much appreciated!
thanks!
Ryan

anyone?

SAP Enterprise Service Explorer

To me it seems that the SAP ES Explorer is the current textbook tool to connect .net in Visual Studio 2008 with SAP backend.
Can I use the tool only with an ESR on SAP side established, or also having just one WebAS ABAP. Since I have to configure the ESR I have not found a way to use it just with a plain WebAS ABAP.

Hi Hork,
for using the ES Explorer you need the ESR. Nevertheless you can also consume the Web Services from WebAS directly in Visual Studio 2008, we published a paper where we describe how to do this on http://download.microsoft.com/download/a/2/8/a287c141-b72e-4e9e-aac5-826e3f0d6d76/StatefulNetWeaverCommunication.pdf where we describe how to do it with Visual Studio 2005, the same approach works in Visual Studio 2008.
Regards,
Juergen

How to consume SAP enterprise services over https using third party tools?

Hi guys,
am just testing consumption of ES using jboss instead of NW for client applications. The ES in our internal ERP are bit strange, ie. they are using HTTPS transport even though you can configure ES with HTTP transport. (in this case, the requests are always redirected to HTTPS one). Wanna hear from perhaps someone who had similar experiences about
- Have you encountered the situation that ES can only exposed as HTTPS WS. Is there any way to enable HTTP ES?
- The way to consume ES over HTTPs. How to configure and generate the client which can talk HTTPs with ES?
Any comnments are thankful.
Best,
Ji
Edited by: Ji Hu on Oct 1, 2010 3:20 PM

Thanks.
Have solved the problem. I need to configure my client, i.e. JVM to connect the server with https. The generated ws client stub itself does not need to care about HTTPS or HTTP transport.
In some case, one do have enabled HTTP transport via soamanager, but it never became HTTP (redirected to HTTPS). I have no idea why, but have to talk in HTTPS as the only one option.

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

Enterprise Service Outbound - SXMSPMAST Pipeline EVENT - no msg to PI triggered

Dear guys
at the moment we are trying to set up SAP enterprise services outbound in the healthcare environment, which should be used through SAP PI.
The ABAP backend is already configured to communicate with SAP PI using ABAP proxy.
We went through the documentation and set up the according customizing, hopefully we did not miss anything.
While running the mentioned report for transmitting business data via enterprise services the according proxy classes have been determined and called, logs look quite promising.
Looking at transaction sxi_monitor in ABAP provider system entries with status 110 - Event Distributed Successfully pipeline EVENT are visible, but none for pipeline SENDER, which is quite common for ABAP proxy request to SAP PI.
Configuration of Business Event
All services that are developed in Enhancement Package 5 are Point to Point enabled i.e. a service can be consumed or received directly without having any Process integration (PI). All information services (i.e. outbound services) are Business event enabled i.e. event is published when an action is performed in the system.
In order to receive the outbound information directly (i.e without Process Integration) one has to enable the Event option in the logical port configuration of the service in SOAMANAGER transaction and also check if the event in activated via SLEI_EVT_LINKAGE transaction.
According to the documentation this enterprise services could be used with or without SAP PI. So for me at the moment is not quite clear, if additional configuration is needed in SOAMANAGER or if this is only needed while working without SAP PI.
I assumption so far was it should be not necessary, and the ABAP proxy configuration already available should be used automatically to send the according request to SAP PI.
Maybe someone could give me a hint if some configuration is missing and how to get the data pushed to SAP PI.
I think the configuration is common for SAP enterprise services and not healthcare specific.
Thanks in advance,
best regards
Jochen

Dear guys
issue solved by creating logical port for proxy in transaction SOAMANAGER selection mode "PI runtime"
best regards
Jochen

Right Granularity of Enterprise Services in order to be used in User Interf

Hello,
i would like to create an aplication based on roadmap component (webdynpro) that uses SAP enterprise services.
After every step i will issue errors if data is wrong.
For ES there are operations (ex. Check Sales Order Creation ). What is if this check deliver error, that fields are not filled althou the fiels are intentend to be entered in next steps.
What does it mean:
Must i redisign my application so that it is sutable to service granularity?
If the customer say "no, the application is fine". Am i forced to implement the same checks in user interface although they will be executed via enterprise service after all steps are processed - not nice soluton.
Does it mean that enterprise service must have many small operations as check to check all my cases, or maybe big check operation must be in some way configurable to ignore some not relavant at current stage checks - a list of fields to check can be provided or ES can deliver all error messages and frontend can delete not relevant.
What is your expirence with Enterprise Services by using them in UI?
thanks
Best regards.
Paul

Hi Paul,
Probably I didn't understood your question correctly but if my understanding is correct then either by check you mean either you are validating user input or you are checking if operation is performed correctly?
In first case ES are not particularly helpful (however few ES available to validate data against valid data) and you must handle this on UI level.
In second case ES are designed in such way that they perform "whole" business operation which might contain vairous technical operation, this is required to ensure integrity of data. Usually all ES return log or fault message which contain useful information about error etc which can be handled on frontend side. this is again to give flexibility to application developer to propagate proper user friendly message or trigger error handling procedure.
Difference between business service is that every ES can be mapped to meaningful business activity or operation and this particular ES execute multiple technical services in single LUW to ensure transactional consistency.
Please let me know if my understanding is correct or above answer is helpful.
Regards,
Gourav

SAP Enterprise Services: Configuration Date

Similar Messages

Maybe you are looking for