Sap ep post installation
hi guys
i have installed portal using rapid installer. then i tried to login to ep through internet explorer browser. but i need that url . how can i get that url .
thanks in advance...
For URL you need the IP or HostName of EP installed machine + port number.
Generaly URL would be like http://<HostName> or <IP>:Port Number/irj/portal
If it is WAS 6.20 or 6.40 try port number 50000 and for WAS 7.0 try port number
50100
e.g for IP - http://192.168.23.12:50000/irj/portal
Thanks
Sandeep
Similar Messages
-
Post - Installation SAP R/3 4.7 - Urgent !!
Hi All,
I have installed SAP R/3 4.7. I would like to know what are the post-installation steps involved in it. I went through the installation guide. But, I am not able to understand the details provided in that. Can somebody tell me what are all the steps involved as a part of the post installation.
Kindly Help !!! Its urgent !!
Regards,
Rose.Hi,
Initial Consistency Check
SM28
Edit Batch Jobs
Workbench Organizer Reconfiguration
TMS Configuration
Import Printers
Client Configuration
SCC4
Set System Change Option
SE06
STMS
SCC7
SM37
Deleting Source System Profiles
RZ10
Reconfigure Operation Modes
RZ04
Delete Update Failures
SM13
Delete Batch Input Sessions
SM35
Reorganize Spool
SPAD
SP12
Delete Invalid Background Control Objects
Restrict Outgoing Email and Faxes
SCOT
Adjust RFC connections.
SM59
Adjust Logical Systems names
SALE
Hope this helps.
Cheeers
Deepanshu -
Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO
Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
HolgerHi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos -
Post Installation for SAP PI 7.0
I have done installation and post installation for SAP XI 3.0. Now I am trying to do the same with SAP PI 7.0. I am done with the installation. Presently working on Postinstallation. I believe this is not similar to SAP XI 3.0 ? Please let me know what are the difference in the Postinstallation between these two and also any links or documents for SAP PI 7.0 will be appreciated. Thank you.
Hello Akella,
You can view the Post Installation steps involved in PI 7.0 in the template installer under
http://servername:50xx0/nwa
Also refer this
PI(XI 7.0) configuration guides
Regarding SAP PI 7.0 Configuration
Just Installed PI
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
regards,
Anandh -
POST Installation steps for SAP XI 7.0 SP06
Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly helpHi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful) -
Post installation Steps for SAP XI
Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
NishantCreate user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer -
SAP Mobile 7.1 post installation activities
Hi,
I have installed SAP Mobile 7.1 ABAP stack.
can any help in locating the post installation steps to activate the mobile contents?
I followed the steps given in the installation guide.
after that I tried to carry out the basic steps like "Create an Administrator Profile" as in the help document under http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/1b199aa3f021a1e10000000a1553f6/frameset.htm.
I am unable to locate the roles mentioned there SAP_DOE_ADMINISTRATOR, SAP_DOE_TECH_ADMIN.
I believe I have missed some steps to activate the mobile contents.
Thanks in advance.
Regards,
Ram.Hi Ram,
if I get yur issue right, you do ask for the installation parameters you need to enter.
I simply istalled the usual ABAP stack - once you have done that, run the function SDOE_WB for example. If that is available, you have done everything fine.
There is not really an MI stack you can select in the installaiton window.
And once you have done that, and SDOE_WB is accessible, please run TRX SDOE_SR for the post installation process.
Furthernore you will find a guid on all necessary steps for post inst here:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Hope that helps!
Regads,
Oliver -
Service com.sap.aii* does not in service list for PI Post installation
Hi Experts,
When I check the PI post installation, in my visual admin Cluster->Server->Service->Delpoy (Application)
the required service "com.sap.aii* and com.sap.xi*" does not exist in the list. How to deploy these mandatory services to my J2EE server, thanks a lot!
FilCheck this thread..
Re: Web Service call through XI returns SAP error( QName is 'xmlns'.....)
SAP Note: 886888
Regards
Anand -
SAP PI7.0 installation and post installation procidure needed
Hi,
I am installing the SAP PI7.0 my O/S is IBM AIX 6.0 and 570 H/W.
Can any one give me the Installation and post installation procedure?you can find
www.service.sap.com/instguides -
SAP Netweaver 2004s SR2 Post Installation Guide
Hi Guys,
Plz send me SAP Netweaver 2004s SR2 Post Installation Guide.....
Email ID :- <email address removed by moderator>
Thanks in advance.
Regards,
Suresh.KDear Suresh ,
You can download from https://websmp102.sap-ag.de/instguides OR https://websmp102.sap-ag.de/installnw70
OR Directly from :
https://websmp102.sap-ag.de/~sapidb/011000358700004073122006E
Regards ,
Santosh -
Post Installation Steps after installation of sap sol 7.1
Dear all
Can you pls share me what are the post installation steps required after the installation of Solution Manager 7.1
I know some of them as same in ECC
1 ) SICK
2) STMS
3) RZ10 - Profile parmeters
4) SGen
5) Back ground Jobs scheduling
Also tell me which parameters need to be set in solman
regards
ShakshiHi,
You can refer below guide for setup:
https://websmp103.sap-ag.de/~sapidb/011000358700000872072011E
Regards
Vivek -
Post Installation steps of SAP Data services
Hi,
Could someone provide screenshots/steps of the post installation of SAP Data services on Unix.
Thanks,
RajivHi Rajiv,
Once DS is installed you need to do few more things to make the system ready to use
Configuring repositories
Create a database for the repository on your database server (take assistance from DBA)
Create the repository in the database with the Repository Manager.
Register the repository in the CMC with the Data Services application(here you have to give database details which you have given for creating repository (refer point a &b)
Assign user access to the repository with the Data Services application.
Configuring users and groups
Log into the CMC Use Admin credentials
Create user accounts and assign them to Data Services user groups with the Users and Groups application.
Assign repository access to your users and groups with the Data Services application
Configuring Job and Access Servers
Add and configure Job Servers with the Server Manager
Add the Job Server configuration
Associate local and profiler repositories with the Job Server
Add and configure Access Servers with the Server Manager
restart the Data Services service and verify that the Job and Access Servers are running
Deploying web applications (BODS automatically installed web app if not you need to manually deploy
Configuring profiler repository connectivity
Login to the Central Management Console (CMC) and register the local repository and select the repository connection type on the Data Services Repository Properties screen
Register the profiler repository and select the connection type to also TNS-less or DSN-less. -
Post installation Steps of SAP EP
Hi All,
What is the Post installation Steps of SAP EP...
Thanks,
ARIFF SHAIKHi
Follow the https://service.sap.com/instguides.
Then open "Installation & Upgrade Guides - SAP NetWeaver 7.0 - Installation"
In the section "Planning" you will find the Master Guide.
Read the Master Guide to determine the installable units, the SAP systems required for your IT scenario, and the installation sequence. MG will drive you to the relevant Install guide which help you to fulfill all the pre- and post-installation steps as well the installation itself.
P.S.
Usually "Running an Enterprise Portal" scenario requires at least EP, EPC and AS JAVA usage types to be installed
Please look this[SAP NetWeaver Process Integration 7.1 Post-Installation Steps|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e]
Hope this helps!!
Regards
Vijay -
Sap Web As 6.40 SR1 post installation error
Hi, I have a problem with the installation of WEB AS ABAP.
I installed Sap Web As 6.40 SR1 following this steps:
Oracle 9.2.0 with the patch 9.2.0.4
Web As Abap.
I assigned two different names for the Oracle System ID and the Sap System ID.
All the installations finished without errors.
In the post installation if I enter in the Sap Management
Console to start the SAP instance i see the following error:
Process: strdbs.cmd
Description: Database
Status: could not be started
I try to resolve the problem following Sap note 786673 (section security: change permission
for Oracle files) but unsuccessfully.
Do you have any suggestion?Hi all,
first of all thanks a lot for your answers.
I have reinstalled the WEB AS ABAP using the same SID for the DB and for SAP (the SID is C01).
Unfortunately, I found the same error when I go to start SAP.
I checked if the oracle services are running and the check was ok, moreover I used the Oracle Enterprise Manager to check if oracle works.
Sanjeev, I tried to find the script stdbs in C:\usr\sap\C01\SYS\exe\run but without success (I can't find the file above-mentioned).
I applied also another time the SAP NOTE 786673 (section security: change permission for Oracle files) but unsuccessfully.
This is the result of the sapstart.loog
SAP-R/3-Startup Program
Starting at 2005/10/11 13:50:30
Startup Profile: "C:\usr\sap\C01\SYS\profile\START_DVEBMGS00_leonard"
Starting Programs
(416) CreateProcess(C:\usr\sap\C01\SYS\exe\run\strdbs.cmd) failed(2). ENOENT*: No such file or directory OR: The system cannot find the file specified.
(1780) CreateProcess: C:\usr\sap\C01\SYS\exe\run\msg_server.exe pf=C:\usr\sap\C01\SYS\profile\C01_DVEBMGS00_leonard
(356) CreateProcess: C:\usr\sap\C01\SYS\exe\run\disp+work.exe pf=C:\usr\sap\C01\SYS\profile\C01_DVEBMGS00_leonard
(1852) CreateProcess: C:\usr\sap\C01\DVEBMGS00\igs\bin\igswd.exe -dir=C:\usr\sap\C01\DVEBMGS00\igs -mode=all -sysname=C01 -sysno=00
Do you have any suggestion to solve this strange problem??
Thanks a lot.
Eugenio.
Message was edited by: Eugenio Cassiano -
SAP Enterprise Portal - Post Installation Tasks
Hello everyone,
I am a beginner in the area of SAP Enterprise Portal. Please bear with me in case if I ask you stupid questions.
"Our idea is to deploy the BIW 3.5 IVIEW over the portal"
I have installed the SAP Enterprise Portal 6.0 SP6 on Windows 2000 server environment. I have followed the install guide and I have done the installation successfully. I am also able to logon to the portal server using the irl url http://sodium:5000/irj/portal as an Administrator.
As a BASIS administrator point of view, what are the next Post Installation activities that I need to perform?
(Our idea is to deploy the BIW 3.5 Iview over the portal)
I really appreciate your responses.
Thanks & regards,
NikeeHello Nikee,
Simply define the SAP BW system, add an Alias, import portal certificate (for SSO), and start creating functional iview that can render your BW queries and reports.
Create a System pointing to the BW server with the following details:
a) System ID
b) Client
c) Web Access Point with "WAS" as category containing the following
entries: -
· Protocol
· Hostname
Note: Domain name of WAS should be same as portal domain
After that create BW iviews
QueryString is in the form "CMD=LDOC&infocube=myCube&query=myQuery"
You should have WAS on the BW server and also IGS shall also be present.
To follow with the latest, see note #489961 and
http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
Hope this will help.
Regards,
AAAttar
Maybe you are looking for
-
Back Up vs. Time Machine Vs. Self Back up
First off, I don't know much about macs so I need some help in backing up our computer. We have a MacBook Pro 10.6.2. It is a little over 3 years old so we don't have Snow Leopard. My husband has been using Backup to back up our info to an external H
-
Any concern about upgrade SHA-1 to SHA-2 on Windows Server 2008 R2 PKI ?
Hi, I have a little knowledge about PKI. I was saw about how to setting and configure CA server to support SHA-2/SHA-256. Has anyone know about what should be concerned before migrate or what have to be done after migrate. 1. Any impact with endpoint
-
Including a JSP page into a JSF page
Hi !! I have read some posts here about <f:subwview>. There says to use: <f:subview> <jsp:include page="somepage.jsp"/> </f:subview>But it does not work. How can i include a jsp page into a JSF page? Thanks !!!
-
Filter AD information from Kerberos logonticket
Hi, I have recently configured SSO with Kerberos and SPNego for a portal system. And it's working fine. The LDAP configuration is pointing to a location on Active Directory. At this level, below, there are some more subfolders that indicates the user
-
Program with out an installer, RemoteApp
I have a professor created program that does not have an installer and he would like to have it published in our RemoteApps environment. I tried just manually publishing the program but only one user at a time can use the program. This program did