SAP EP - Windows 7 and IE 8 problem

Hi all,
Sorry to disturb all of you.
I'm confronting a ridiculous problem.
Some of my clients are using Windows 7 and IE8. The EP is working fine.
However, there is somewhat of PCs don't work with Windows 7 and IE8 the browse will hang and became idlely.
Then I had tried to open EP in Firefox but It worked like a charm.
May I know is there any solution to resolve my problem.
Thank you very much.

Hi,
I just got the same question. Below I capture the reply from OSS for your reference.
I have checked the SP level for your system which is SP12, I would like you to check attached PAM for NW7.0,
if you would like to use Windows7 and IE 8.0, the SP level could be not lower than SP21,
more detail please refer to attached the PAM file page 16 and page 17.
The PAM could be found in above reply. :P
PS: the compatibility mode of IE8 could not fix all the problem which happen when using the Portal.
cheers,
Gary

Similar Messages

SAP Script - Window and box

Hello All
I have done changes to include few(3) lines in a SAP Script window. Because of those 3 lines, contents that were printed earlier are not getting printed.
The window is getting printed inside a box and it is defined as
BOX FRAME 10 TW.
Window height is 22.50 Ln,width 9.50 CM.
To rectify this should I increase the height of this window or should I define the attributes of the box
Please reply at the possible earliest.
Thanks in advance.

Check this
Setting default parameters for a box:
You can use the POSITION and SIZE commands to set default parmeters for a box.
Instead of:
/: BOX XPOS '11.21' MM YPOS '5.31' MM HEIGHT '10' MM WIDTH '20' MM INTENSITY 10 FRAME 0 TW
You can write:
/: POSITION XORIGIN '11.21' YORIGIN '5.31' MM
/: SIZE HEIGHT '2' MM WIDTH '76' MM
/: BOX FRAME 10 TW INTENSITY 10
This can be usefull if you gave several boxes that share the same parameters.
If you want to set the position realtively to the window use POSITION WINDOW
to set the position to the top/left start of the window. Then use POSITION
to set the current position relatively to the start of the Window.
Note that you uses "+" or "-" in the ORIGIN position to the set the position relatively.
/: POSITION WINDOW
/: POSITION XORIGIN '+5' MM YORIGIN '+10' MM
the position is now 5 MM from the left and 10 MM from the top of the window
NOTE: After using the position command you can move the current position
realtively to the last used position
/: POSITION XORIGIN '+10' MM YORIGIN '+20' MM
Now the position will be X = 15 and Y = 30
Drawing a line. You can draw a line by setting the Height or Weidth to 0
and add a frane. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100

Safari 5 don't print jpg images in Windows and prints with problems in Mac

Hi All,
When I try to print images in Safari (Windows) it will print blank page.
This is sample source:
<html lang="en-US">
<body>
<im g src="http://img185.imageshack.us/img185/4651/wefwefwe.jpg">
</body>
</html>
This is ok in Mac.
Also in Mac When I'm printing image in Landscape it print image in 2 pages.
Image really fits in landscape mode and there is no need for second page.
I thought that the problem is margins..., but changing them do smaller values doesn't help.
Can someone help out?

Hi, I also have the same problem that cannot print preview on .jpg image.
When I try to change image to .png , it work.
It's this safari5 bug?

Window and tab safari problems

I updated Adobe flash player and it automatically updated safari as well without even asking me. Now when I highlight and click on a link there is no longer an "open link in new tab" option. I have gone into the safari preferences and tried to fix it under the tabs section but when I do that links only open in new tabs and not windows when you select the "open link in new window" option. Is there any way to fix this?

While we all have MacBooks in this forum not all of us use Safari. Many of us use Firefox or Chrome. There's a Safari Support Community where everybody uses Safari. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/safari

SAP B1 window design

Hello,
A customer has asked me to request a change to be considered to the window design in a future release. When they resize the SAP B1 window and then close SAP B1 and reopen it, the applicaiton opens in full size rather than the size the user had made it when it was closed. Most other applications do this and the customer is finding it frustrating that they have to resize the window everytime they log in.
Many thanks,
Kate

Hi, Kate.
Could you please describe more about the case, especially about the use scenario? Before design, we have to know the reason why users need to resize B1 window and even keep its size.
Additionally, if the B1 window can be kept the size the user had made last time, how about the forms in B1? Do these forms also need to be kept the size when B1 is opened again? Form UX side, I think the answer is yes. The consistent UI solution is to keep all the window size users made in B1, not only B1 window.
Any comment is warmly welcomed.
Thanks,
Zhou Heng
From B1 UX

SAP GUI 7.20 for Windows and problem with Screen Painter

Hello,
I just installed the SAP GUI 7.20 for Windows and it looks good.
But when when I start the Screen Painter for a dynpro I get the following message:
Graphical Layout Editor not available. Continue with alphanumeric editor.
And: EU_SCRP_WN32 Connection broken '..' / CPIC
The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
Any idea?
Regards,
Ole.

Hello,
I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
And now I will update the Screen Painter with the information from the OSS-Note!
Thank's for your help!
Regards,
Ole.

Application switching/windows and titlebar problem

Hi,
Apologies if this isn't the best place to post this, but it's a problem that relates to switching between applications in OS X, and I haven't yet found an answer through Director forums.
So... I am working on a (cross-platform) Director project that has to link to and open Word DOCs. I have a problem in OS X whereby when a DOC is opened, the Mac does not seem to be switching properly into Word. What happens is: click thumbnail (running handler to open DOC, using Buddy API xtra); Word starts to open the DOC; DOC window appears in front of projector Window, but the Mac titlebar seems to 'stick' in the projector. I can edit the DOC, use keyboard commands to save etc., but no menus are visible due to the 'ProjectorName.osx' title bar. I can switch to Word with Apple-tab, but not by clicking in the Word window(s).
A few extra notes:
• The projector resizes the screen to 800x600, but even with this feature disabled the problem persists.
• There appears to be a very strong link between creating a Full Screen projector and whether the problem manifests itself or not. All projectors created with Full Screen checked now have the problem (along with a few non-Full Screen). Unfortunately I need to lose any title/menu bar, therefore need to use Full Screen projectors.
• The problem has just arisen; essentially identical projectors (ie. differences are only in graphics) have run OK.
• We have used a couple of different xtras to open the files, for reasons unconnected with this issue. However we have been using BuddyAPI for a while, so I am reasonably sure that the problem is not related to this.
• Ensuring that unnecessary apps are closed, to ensure plenty of free memory, makes no difference.
Paul

> now my oracle is up but not able to login in sap.
Your system is hosed up.
> one is : oraclesri102isql*plus service is not getting started.
That service is not important for a SAP system.
Chintan,
it is not supported to make changes to a domain structure after you installed the system (see the given note). That's why your SAP system is not coming up, all filesystem-, registry and user permissions are invalid.
The only way to resurrect your system is to reinstall it.
Configure first the operating system (as standalone or in a domain) - and then install the SAP system, not vice versa.
Markus

SAP GUI for windows and HTML

Hello,
We have problem running a custom program, when it was integrated as Transactional iView with SAP GUI Type as SAP GUI for HTML.
But, the same program is running fine with SAP GUI Type as SAP GUI for Windows.
Is there any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thank you.

Hi,
We have a custom ABAP program, where we we can upload data through an excel file.
The xls file can be uploaded from local drive.
So, we have created a Transactional iView with SAP GUI Type as SAP GUI for HTML.
When we try to run the program with an excel file, we are receiving an error message - "Empty input file or input file not found"
Then we have created a Transactional iView with SAP GUI Type as SAP GUI for windows and was successful in uploading the xls file.
Just want to understand, if there is any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thanks in Advance.

Microsoft Excel for Windows has encountered a problem and needs to close. W

i have the attached problem anytime i tried to open a BW query in excel:Microsoft Excel for Windows has encountered a problem and needs to close. We are sorry for the inconvenience", Please inform if there is a work arround, i have re-install excel , likewise SAP many times but nothing

Hi,
I would suggest you check with any other colleague if they are able to run the same or not. Running BEx report depends hugely on the front end capacity and performance. Please check if anyone else can run the same report, with the same front end RAM, then it might be the problem with your installation.
Also you can try with the latest patch for GUI s/w.
Regards,
Debasis.

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

Just purchased and installed photoshop and everytime i try to open it it says "windows has encountered a problem and must close the program" anyone else have this problem?

I have just purchased the photography package on my windows 8 computer and everytime I open photoshop an error message pops up saying that windows has encountered a problem and needs to close the program. I am really frustrated that this is happening after I purchased this plan and would like to be able to use the product I have purchased

+1 to Chris' assessment.
Keep in mind that it's your responsibility to provide a problem-free working environment on your computer for Photoshop, and system software (such as display drivers) can have problems.
Look in your Windows Event Logs (specifically, your Application Log) for the info requested above on the specific crashes.
-Noel

Hi, I download the latest version of itunes and i have problem now to sync my iphone with my computer, I have windows 7 home premium service pack 1, can somebody tell me how to fix it. thanks

Hi, I download the latest version of itunes and i have problem now to sync my iphone with my computer, I have windows 7 home premium service pack 1, can somebody tell me how to fix it. thanks

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

I made an IMovie project and I can't now make a DVD of it. A window says there are problems and that they are shown in the User Parameter List. I am at a loss. Don't know what to do. HELP

I have made an IMovie consisting of slides and some video. I cannot create a DVD with it. A window tells me there is a problem and that the problem is listed in the User parameters.....I am at a loss. There are hours of work in the Movie. Anyone have a thought? HELP

problem and that the problem is listed in the User parameters
Can it be
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Y500 dual boot windows 8 and fedora 19 problem

I bought a y500 two days ago and i wanted to dual boot windows 8 and fedora 19, so here's what i did
1. downloaded fedora 19 (x64) iso from the fedora website.
2.made a live USB using live usb creator.
4.opened disk management utility and shrunk the c drive (windows 8 was installed here) by 100 gb and kept the 100gb unallocated.
3. started the laptop with novo button, changed the bios config to boot from usb.
4.installed fedora from usb, selecting the 100gb unallocated memory for installation
5.restarted the laptop.
now the problem is fedora works perfectly but when i try to boot windows 8, the following error is shown.
windows failed to start
file:\BOOT\BCD
status: 0xc0000225
info:the boot configuration data for your PC is missing or contains errors.
i am guessing the fedora installation overwrote the boot files of windows and
i have not taken a backup. please help

hi,
I have a Y500 and I wanted to dualboot fedora 19 with windows 8, this proved to be unsuccessful. I had made a repair disk before the process (but not a set of recovery disks unfortunately >.< ). now I inserted the repair disk and selected the automatic repair option, it showed a message that auto recovery has failed. now when I pressed the NOVO button and selected the system recovery option, it does not go into the OKR menu but continues with the normal booting process. Can somebody guide me or give links where I can find step by step instructions to making OKR work and reset my laptop to factory settings? PLEASE help As Soon As Possible
NOTE: I did resize the windows 8 os partition but the recovery and the lenovo partition are still untouched

Windows 7 and Arch (GRUB problem)

Hello I'm a new user in Arch and almost new in linux (well i need to work at university with linux so i'm not such a newb). I was using Windows 7 for a while and i installed Arch linux for programming. Everything installed very well and i really like Arch linux. But there is one problem, when GRUB boots i can choose between Arch and Windows and while i boot Arch everything is Ok, but the problem is when i boot Windows and it disables my GRUB (GRUB is installed in boot partition 200mb) well not disables, but just takes of Boot option (flag?) from boot partition and GRUB doesn't loads. so all the time after Windows usage i must run cfdisk and make boot partition bootable and remove root from windows.
Maybe anyone knos how to solve this problem or they have encountered such problem and fixed it.
If u need any code from GRUB say i will post it later, now i need to finish program in Windows.
P.S. i have surfed/serached forum for few days about such problem and found nothing... (maybe i'm blind?)

Firstly, normal people (atleast those i have communicated) don't critisize for grammar mistakes because everyone makes such mistakes. Second i prefer my mother langue more than other and i don't even bothered to learn english like i learned lithuanian langue.
Secondly, yeah if you would read news about computing and etc. you should know that there isn't full windows 7 there is windows 7 BETA, well i personally just forgot that work(mistake maybe? or i prefer not to say beta words with programm because i work mostly with beta programms).
And yeah Windows 7 was first installed (doh, if you would think more that fact would be clear because i wrote "I WAS using Windos 7 for a while..."

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

SAP EP - Windows 7 and IE 8 problem

Similar Messages

Maybe you are looking for