SAP EP WITH BI Reports
Dear All
We are accessing BI Reports through portal. one user changed the layout & saved it. By default it's coming that's saved layout with out asking any input. please let me know how to reset the filter setting in particular report. or any other settings
Thanks
Rajesh
Hi Rajesh,
Please ask the Portal administrator to remove the user personalization for the pcd object.
Please follow the below link to achieve the same:
http://help.sap.com/saphelp_nw70/helpdata/en/44/70edb7209112d1e10000000a422035/content.htm
BR,
Anurag
Similar Messages
-
New to sap, play with .rpt reports
Hi,
I have downloaded a trial crystal report 2013 and I would like to play with some reports are running on our system but in order to don't destroy them, I want to know the next points:
How identify the version of the actual file report file .rpt or the crystal report version was made, i would like to keep the original version all the time or during the test process.
some reports are working in our system that i will make a backup for them, the question is if something is wrong with the test report, the restoration to the original state should be replace the test file for the backup file into the original folder? do we need to stop the server first? what important considerations we need take before replace a file or after replacing a file.
For the viewer of reports, do we need an additional software? we have one viewer for the actual reports but I would like to have an additional viewer for the test process, Do we?.
if you need more info about the actual system we have please let me know.
I think for the moment answering the last questions i will be able to select the right version and create a backup before testing reports.
I will appreciate a response for itHi Emilio
How identify the version of the actual file report file .rpt or the crystal report version was made, i would like to keep the original version all the time or during the test process.
There is no "out of the box" way of determining what version of CR the report was created in. There are APIs in .NET and Java that will tell you this, but then you'd have to create an app your self. Alternatively, download the attached app created by Don WIlliams. When you open the report in this app, it will tell you what version of the designer the report was created in (note: After you download
the file, unzip it and rename to .exe):
Note 2: You may have to install the 4.0 framework before the above app will run.
some reports are working in our system that i will make a backup for them, the question is if something is wrong with the test report, the restoration to the original state should be replace the test file for the backup file into the original folder? do we need to stop the server first? what important considerations we need take before replace a file or after replacing a file.
I don't understand. If you have a back up, why would you want to do a "restoration"? Note that restoring the report and saving it will save it as version 14.1 and there is no Save as version X.
For the viewer of reports, do we need an additional software? we have one viewer for the actual reports but I would like to have an additional viewer for the test process, Do we?.
There is a number of viewers:
1) There is a viewer in the CR designer.
2) You can download the free viewer that looks much like the viewer in the designer (but it will not let you change db connections or modify the report). Download link:
SAP Crystal Reports viewer | Crystal Solutions| Business Intelligence | SME | SAP
3) You can create your own app in .NET or Java and these SDKs have their own viewers.
4) SAP BusinessObjects BI Platform (BO Enterprise) has it's own viewers.
5) SAP Report Application Server has viewers.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Problem to connect SAP tables with Crystal report 2011
Hi,
I am new in Crystal report,
I Install CR 2011 in my PC now when I make a new connection under path FIle->New->Blank Report I choose SAP Table,Cluster or Function
here I give Clint,User and Password and try to connect then following msg will display
Logon Failed.
Details: You do not have necessary rights to design report against the SAP system . Please check with your System Administrator.Hi,
Step 1:After Clicking SAP BW Query, you need to goto SAP tab from the context menu and click on
Step 2: Create New Report from a Query
Step 3: Click on OLAP tab, Here you can select your Cube and select SAP Business Information Warehouse
Step 4: Go back to SAP tab and click on Start BW Query Designer(this allows selection of the cube from the Query designer Interface)
You will understand automatically about further steps once you are able to follow the above steps............
Regards,
Suman -
Hi everyone,
Is there anyone who can explain me about SAP fi/co reporting for Federal Energy regulation Commission for stautory reports and requirements.
I tried in sdn forum, but news on this. I just want to know the link between fi/co reporting extract process for FERC.
Thanks for your time,
Suresh arya
email Id: [email protected]hi,
chk out the links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1cf73536-0301-0010-f880-d9e826a330cc
there is online free demo version available expalining the things
http://itsolutions.windowsitpro.com/windowsitpro/search/viewabstract/69473/index.jsp
Accessing a GUI interface to develop Reports just as in Cognos
BI without BEx
BW Reporting
Ramesh -
Need SAP BW AR Aging Report with R/3 Aging Report Should Match
Hello All,
Could you please let me know SAP Delivered AR Aging Report on BW Side should match with SAP R/3 AR Aging Report for a given Customer.
When I ran the report on BW Side I am able to match the report values with InfoProvider Values and also with RSA3 Extractor (0FI_AR_4).
But when i tried to compare BW report with ECC Report values are not Matching at a given Customer Number.
Please explain the best practice to match the values of BW Standard Aging report with ECC standard AR aging report.
Thanks,
GeethaHi,
I am actually running the SAP Delivered Report in BW.
So I didn't changed any thing in report.
I m running the report in ECC using s_alr_87016128 tcode.
Still I m getting the amount difference.
I have checked at customer level with company code and Key date.
Can i get inputs on these.
ECC Report s_alr_87012168
BW Report:0FIAR_C03_Q0005
Thanks,
Geetha -
Why we need ABAP if we can connect With Crystal Reports to SAP R/3
Hi,
I am new to Crystal reports.I came to know that we can connect SAP R/3 by using SAP InfoSet,SAP Table Cluster and Function connectivity in Crystal Reports.So we can generate reports for SAP R/3 database with out need of ABAP.So why we need to go ABAP module.Is there any disadvantages if we dont use ABAP to generate reports or we can use always Crystal Reports to generate Reports for R/3 database?Hi,
it is correct that you can built a Crystal Report without the need to use ABAP, but we have lots of customers that have invested over the years into ABAP Routines and Crystal REports is able to leverage those as well. So with Crystal Reports you have the choice to leverage existing ABAP Functions as a source for reporting - which might help to leverage complex processing on the backend - or to use InfoSets and tables.
regards
Ingo -
How to Integrate SAP EP with SAP PI to send data for creating reports in BW
Hi Gurus
I am struck with an Object/Interafce Creation in my project. My requirement is to Integrated SAP Enterprise Portal and SAP BW using SAP Pi. I am working on SAP PI7.1. The SAP EP sits on the Oracle Database and it will send some data required for generating some reports in BW.
My question is how to integrate the above systems by which adapters and which will be the best approach. If we use PI, the major advantage is we can Monitor the flow of the messages .
Cant the BW System directly talk with the SAP EP System. If there is an approach, can we monitor the message flow with out PI involvement.
All the above mentoined systems(SAPEP,SAPPI,SAPBW,SAPSRM,SAPABAP) are in the client landscape only.
Please suggest me the approach.
Thanking youHi rajshekar
Thanx for the reply
In the current project we are having an Interafce which is a B pass sceanrio from MDM to BI; MDM is dat , pi is picking the data by Sender File CC and Posting the Data to BW by using Receiver File CC. this does not involve any developemnt of ESR Objects.
My current requirement also seems to be the same Pick thhe date from SP Portal and give it to BW for generaiting reports.
Can i use the SOAP at sender side and File at receiver side with out the involvement of ESR Objects.
Does the By Pass aprroach work for this aprticular interafce.
How can we integrate SAP EP with BW withour Pi?
please share any blogs or forums
please help
Thank you
Edited by: VArjun86 on Jan 4, 2012 10:27 AM -
Issue with Crystal Report & SAP B1 8.8
Hello,
I imported my crystal report in SAP.
When I want to edit the report throught SAP, it opens the report on crystal report session.
The problem is when I want to save the file. It wants to save in a temporal file.
How I can solve it ? where SAP save the .RPT flie ?
ThanksHi,
You can save your edit CR (Crystal Report) in .rpt file.
Once you have imported CR
Admin > Setup > General > report n layout....
Select Your CR
Click on Edit button
now new window is open that is CR in editable form
Go in File Menu of CR > Save As > "Give your location"
Which will save as .rpt format....
Thanks
King Kevin -
Issues with BEx Reports in SAP Enterprise Portal
Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
VikashHI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash -
I dont see the SAP toolbar in Crystal Reports XI
I installed crystal reports XI (I only have one CD) and Business Objects Enterprise. I also installed Business objects integration kit for SAP, after I opened the crystal reports from the start menu I don't see any SAP BW Add On. I dont know why this happened. Please guide through this.
Lulú McDonaldthe add ons installed are:
SAP GUI:
SAP GUI with SAP Logon
SAP GUI with SAP Logon Pad
BW Add-on:
Business Explorer (SAP BW 3.x)
OLE DB for OLAP Provider
Merchandise an Assortment Planning
Lulu -
Help with Upgrade report in FI
Hey All Gurus,
Im in a thick soup here. I am trying to do something like this -
if you see the selection screen i have rep and super rep, when a user enters a rep value --- it should use the same value to pull all open items for the super rep as well, since they are essentially the same. please help! this one needs to be done fast. i am pasting the code so that it will be easier ...
thanks a million!
*& Report ZFDOFW04_NEW
REPORT ZFDOFW04_NEW MESSAGE-ID FR
LINE-SIZE 132
LINE-COUNT 60.
*==================================================================
Program: ZFDOFW03 - Aged Trial Balance Report
This produces an Accounts Receivable Past Due Aging Report
in a more simplified/condensed format than the
SAP supplied aging report program - RFDOPR10.
This program is a modified copy of RFDOFW00, - a SAP
Future-Due Report.
This was a 'rush' job - program probably should be
rewritten someday not using logical databases as that
maybe why this runs so slowly!
Original: Feb 1997.
MAINTENANCE HISTORY:
NES071797 Copied from ZFDOFW03. Adding parameter for saeles rep.
JDEDERER - changed header text so it is differnet from ZFDORW03. 9/23
*TEXT SYMBOLS :
001 Open items per
002 O p e n
003 D u e o n
004 cc ba in total
005 until
006 Days until
007 Days over
008 Days
009 over
011 valid until........
012 Insurance limit.....
016 F u t u r e
017 + days
018 D u e
020 Last dunn.notice...
021 Dunning level....
030 S U M M A R Y S H E E T
031 =====================
050 Name Page
051 Burton Snowboard
SELECTION TEXTS:
SUMMEN Output totals only
TAGE1 Due date I until
TAGE2 Due date II until
TAGE3 Due date III until
TAGE4 Due date IV until
TABLES: T001, KNA1, KNB1, KNB5, BSID, BSEGA, RFPDO1, KNVP,
T014, "credit control areas JAM
KNVK, "cust master - contact partner JAM
T014T, "Credit control areas names
BKPF, "TONY ISSUE 4743
TVKO, "TONY ISSUE 4743
KNKK. "cust master - credit mgmt JAM
TYPES: BEGIN OF TOT_TYPE, "DEVK939546
BUKRS LIKE LFB1-BUKRS, "DEVK939546
GSBER LIKE BSIK-GSBER, "DEVK939546
KKBER LIKE BSID-KKBER,
RAST1 TYPE P, "DEVK939546
RAST2 TYPE P, "DEVK939546
RAST3 TYPE P, "DEVK939546
RAST4 TYPE P, "DEVK939546
RAST5 TYPE P, "DEVK939546
RAST6 TYPE P, "DEVK939546
RAST7 TYPE P, "DEVK939546
END OF TOT_TYPE, "DEVK939546
TOT_TAB TYPE TOT_TYPE OCCURS 0. "DEVK939546
CONSTANTS:
C_FALSE TYPE I VALUE 0, "JAM
C_TRUE TYPE I VALUE 1.
DATA: BEGIN OF GTAB OCCURS 1000,
SUPER(10) TYPE C, "TONYC
REP(10) TYPE C, "TONYC
FILKD(10), "tonyc show buying groups
LAND1 LIKE KNA1-LAND1,
GSBER LIKE BSIK-GSBER,
REGIO LIKE KNA1-REGIO,
NAME1 LIKE KNA1-NAME1,
NAME2 LIKE KNA1-NAME2,
ORT01 LIKE KNA1-ORT01,
TELF1 LIKE KNVK-TELF1, "telephone number JAM
CONT_NAME1 LIKE KNVK-NAME1, "contact name JAM
NAMEV LIKE KNVK-NAMEV, "contact name JAM
KUNNR LIKE KNA1-KUNNR, "TONYC
BUKRS LIKE LFB1-BUKRS, "TONYC
KKBER LIKE BSID-KKBER, "tonyc issue #2500
ZTERM LIKE KNB1-ZTERM, "tonyc issue #2500
KLIMK_TXT(22) TYPE C, "credit limit JAM
WAERS LIKE T014-WAERS, "currency JAM
SORT_GSB, "TONYC
RAST1 TYPE P,
RAST2 TYPE P,
RAST3 TYPE P,
RAST4 TYPE P,
RAST5 TYPE P,
RAST6 TYPE P,
RAST7 TYPE P,
T_IND,
END OF GTAB.
DATA HOLD_NAME(40).
DATA HOLD_BUKRS LIKE T001-BUKRS. "tonyc
DATA GOOD_SUPER_REP. "tonyc
DATA: HOLD_REP LIKE KNA1-KUNNR, "tonyc
SUPER_NAME LIKE KNA1-NAME1, "tonyc
REP_NAME LIKE KNA1-NAME1. "tonyc
DATA NAME_LENGTH(2) TYPE C. "tonyc
DATA BACKSLASH(3) VALUE ' / '. "tonyc
DATA REPS_INFO(70) TYPE C. "tonyc
DATA REPORT_TYPE(12) TYPE C.
DATA: C_CREDIT_ABTNR LIKE KNVK-ABTNR. "dept 003 = credit
DATA Z_HOLD_LIMIT(22) TYPE N. "tonyc issue#2216
DATA Z_DESCRIPTION(18). "tonyc issue#2216
DATA WRITE_TOTAL.
DATA HOLD_KLIMK LIKE KNKK-KLIMK.
DATA HOLD_KLIMK2(22) TYPE C.
DATA HOLD-CTLPC LIKE KNKK-CTLPC.
DATA HOLD-CTLPC-TEXT LIKE T691T-RTEXT.
DATA HOLD_ZTERM LIKE KNVV-ZTERM.
DATA TOTAL_RAST7 TYPE P.
DATA TOTAL_RAST2 TYPE P.
DATA TOTAL_RAST3 TYPE P.
DATA TOTAL_RAST4 TYPE P.
DATA TOTAL_RAST5 TYPE P.
DATA TOTAL_RAST6 TYPE P.
DATA TOTAL_RAST1 TYPE P.
DATA HOLD_BUKRS2 LIKE T001-BUKRS.
DATA HOLD_KKBER LIKE BSID-KKBER.
DATA HOLD_KKBER_DESC LIKE T014T-KKBTX.
DATA HOLD_KKBER_DESC2 LIKE T014T-KKBTX.
DATA HOLD_KUNNR2 LIKE KNA1-KUNNR.
DATA L_FIRST_DAY_OF_FISCAL LIKE SY-DATUM. "tonyc issue #3047
DATA: STAB TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
RTOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
STOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
OP,
MAXMANDT LIKE DD_STIDA,
MAXMANST TYPE P,
SUMKLIMB TYPE P,
SUMVLIBB TYPE P,
VERZUG TYPE P,
OBAD TYPE P,
BLOCK_CNT TYPE P,
INTENS,
ONEBYTE(1) TYPE C,
TAGE1A LIKE RFPDO1-ALLGFAEL,
TAGE2A LIKE RFPDO1-ALLGFAEL,
TAGE3A LIKE RFPDO1-ALLGFAEL,
HOLD_KUNNR LIKE KNA1-KUNNR, "tonyc
HOLD_SUPER LIKE KNA1-KUNNR, "tonyc
HOLD_REP2 LIKE KNA1-KUNNR, "tonyc
SUPER_REP LIKE KNA1-KUNNR, "tonyc
TEMP_TELF1 LIKE KNA1-TELF1, "JAM
IT_T014 LIKE T014 OCCURS 0 WITH HEADER LINE, "JAM
G_KLIMK_TXT LIKE GTAB-KLIMK_TXT, "JAM
G_WAERS LIKE GTAB-WAERS, "JAM
G_CONT_NAME(50) TYPE C. "JA
DATA FILL_REP_INFO.
BC SUNILP 05/14/2007
DATA: BEGIN OF ITAB_VBRP OCCURS 0.
INCLUDE STRUCTURE VBRP.
DATA: END OF ITAB_VBRP.
DATA: T_PERC TYPE F,
SUM_NETWR LIKE VBRP-NETWR.
*DATA: GTAB_LINES LIKE GTAB OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF GTAB_LINES OCCURS 0.
INCLUDE STRUCTURE GTAB.
DATA: IND(1),
OBAD TYPE P.
DATA: END OF GTAB_LINES.
DATA: BEGIN OF ITAB_VBRP1 OCCURS 0,
VBELN LIKE VBRP-VBELN,
NETWR LIKE VBRP-NETWR,
ZZMREP LIKE VBRP-ZZMREP, "Super Rep
ZZLREP LIKE VBRP-ZZLREP, "Rep
PERC TYPE F,
END OF ITAB_VBRP1.
EC SUNILP 05/14/2007
BEGIN_OF_BLOCK 2.
PARAMETERS: REGIO LIKE KNA1-REGIO.
PARAMETERS: CONSOL AS CHECKBOX. "TONYC
PARAMETERS: P_KKBER AS CHECKBOX, "TONYC
P_CONV AS CHECKBOX. "tonyc issue #3047
PARAMETERS: SUMMEN LIKE RFPDO1-ALLGSUMM,
TAGE1 LIKE RFPDO1-ALLGFAEL DEFAULT '30',
TAGE2 LIKE RFPDO1-ALLGFAEL DEFAULT '60',
TAGE3 LIKE RFPDO1-ALLGFAEL DEFAULT '90',
TAGE4 LIKE RFPDO1-ALLGFAEL DEFAULT '120'.
END_OF_BLOCK 2.
BEGIN_OF_BLOCK 3.
SELECT-OPTIONS: P_SUPREP FOR KNVP-KUNNR, "Super REP "DEVK939546
P_REP FOR KNVP-KUNNR, "SALES REP "DEVK939546
P_VKORG FOR TVKO-VKORG, "TONYC ISSUE 4743
P_LOTKZ FOR BKPF-LOTKZ. "TONYC ISSUE 4743
END_OF_BLOCK 3.
INITIALIZATION. "JAM
PERFORM LOAD_T014. "JAM
refresh dd_augdt.
clear dd_augdt.
dd_augdt-option = 'EQ'.
dd_augdt-sign = 'I'.
dd_augdt-low = ' '.
append dd_augdt.
AT SELECTION-SCREEN.
IF CONSOL = 'X'.
IF NOT P_SUPREP[] IS INITIAL. "DEVK939546
MESSAGE E999 WITH 'Consolidated report not allowed w/ Super Rep'.
ENDIF.
ENDIF.
CHECK IF THE REP INFO IS ADDED OR NOT - VS
IF NOT P_SUPREP IS INITIAL OR"TONY ISSUE 4743
NOT P_REP IS INITIAL."TONY ISSUE 4743
FILL_REP_INFO = 'X'."TONY ISSUE 4743
ENDIF."TONY ISSUE 4743
START-OF-SELECTION.
get_frame_title 2.
add function module to track usage JD 10/13/98 *****
CALL FUNCTION 'Z_RUN_LOG'
EXCEPTIONS
OTHERS = 1.
*IF NOT P_SUPREP IS INITIAL AND NOT P_REP IS INITIAL.
P_SUPREP = ' '.
*ENDIF.
GET KNA1 FIELDS LAND1 REGIO KUNNR NAME1 NAME2 ORT01 TELF1. "JAM
new-page.
skip.
TEMP_TELF1 = KNA1-TELF1.
MAXMANDT = '19000101'.
MAXMANST = 0.
SUMVLIBB = 0.
PERFORM GET_CUST_CONTACT. "JAM
Check sales rep- NES071797
Get any valid record and exit.
IF NOT p_suprep[] IS INITIAL. "DEVK939546 "TONY ISSUE 4743 start
good_super_rep = ' '.
SELECT kunn2 INTO super_rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZS' AND
kunn2 IN p_suprep.
EXIT.
ENDSELECT.
IF sy-subrc = 0.
good_super_rep = 'X'.
gtab-super = super_rep.
super_rep = ' '.
ENDIF.
CHECK good_super_rep = 'X'.
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ELSEIF NOT p_rep[] IS INITIAL. "DEVK939546
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ENDIF. "TONY ISSUE 4743 end
GET KNB1 FIELDS BUKRS VLIBB ZTERM. "tonyc #2500
GTAB-BUKRS = KNB1-BUKRS.
GTAB-ZTERM = KNB1-ZTERM.
SUMVLIBB = SUMVLIBB + KNB1-VLIBB.
GET KNB5.
IF KNB5-MADAT > MAXMANDT.
MAXMANDT = KNB5-MADAT.
ENDIF.
IF KNB5-MAHNS > MAXMANST.
MAXMANST = KNB5-MAHNS.
ENDIF.
SUMKLIMB = SUMKLIMB + KLIMB.
GET BSID.
CHECK BSID-BSTAT = SPACE.
field was intended for Business Area, changed to use Currency
GTAB-GSBER = BSID-WAERS.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF BSID-KKBER = ' '.
GTAB-KKBER = BSID-BUKRS.
ELSE.
GTAB-KKBER = BSID-KKBER. "TONYC ISSUE #2500
ENDIF.
ENDIF. "TONYC ISSUE #2500
SELECT SINGLE * FROM BKPF "TONY ISSUE 4743
WHERE BUKRS = BSID-BUKRS "TONY ISSUE 4743
AND BELNR = BSID-BELNR "TONY ISSUE 4743
AND GJAHR = BSID-GJAHR. "TONY ISSUE 4743
BC SUNILP 05/14/2007
IF BKPF-XREF2_HD IS NOT INITIAL.
CHECK BKPF-XREF2_HD IN P_SUPREP. "TONY ISSUE 4743
ELSE.
IF P_REP[] IS INITIAL.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-SUPER = BKPF-XREF2_HD. "TONY ISSUE 4743 "MOVE THE CONTENTS OF XREF2_HD TO GTAB INTERNAL TABLE - VS
ENDIF.
BC SUNILP 05/14/2007
IF BKPF-XREF1_HD IS NOT INITIAL.
CHECK BKPF-XREF1_HD IN P_REP. "TONY ISSUE 4743 " ELSE MOVE THE CONTENTS OF - VS
ELSE.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-REP = BKPF-XREF1_HD. "TONY ISSUE 4743
ENDIF.
CHECK BKPF-LOTKZ IN P_LOTKZ. "TONY ISSUE 4743
CHECK BKPF-BRNCH IN P_VKORG. "TONY ISSUE 4743
SELECT SINGLE FILKD INTO GTAB-FILKD FROM BSEG
WHERE BUKRS = BSID-BUKRS
AND BELNR = BSID-BELNR
AND GJAHR = BSID-GJAHR
AND BUZEI = BSID-BUZEI.
gtab-gsber = bsid-gsber.
get rep info for each bsid record
IF NOT P_SUPREP IS INITIAL. "tonyc
SELECT KUNNR FROM VBPA INTO HOLD_REP UP TO 1 ROWS "tonyc
WHERE VBELN = BSID-VBELN "tonyc
AND PARVW = 'ZR'. "tonyc
ENDSELECT. "tonyc
IF NOT P_REP IS INITIAL. "tonyc
CHECK HOLD_REP = P_REP. "tonyc
ENDIF. "tonyc
GTAB-REP = HOLD_REP. "tonyc
HOLD_REP = ' '. "tonyc
ENDIF. "tonyc
PERFORM GET_KNKK_INFO. "JAM
GTAB-KLIMK_TXT = G_KLIMK_TXT.
GTAB-WAERS = G_WAERS.
GTAB-LAND1 = KNA1-LAND1.
GTAB-REGIO = KNA1-REGIO.
GTAB-KUNNR = KNA1-KUNNR.
GTAB-NAME1 = KNA1-NAME1.
GTAB-NAME2 = KNA1-NAME2.
GTAB-ORT01 = KNA1-ORT01.
*if there is no phone number for the contact, pull the phone
*number from the sold-to
IF KNVK-TELF1 = ' '.
GTAB-TELF1 = TEMP_TELF1.
ELSE.
GTAB-TELF1 = KNVK-TELF1. "JAM
ENDIF.
GTAB-CONT_NAME1 = KNVK-NAME1.
GTAB-NAMEV = KNVK-NAMEV.
verzug = bsega-netdt - dd_stida.
VERZUG = DD_STIDA - BSEGA-NETDT. "days past due calculation
OP = 'X'.
GTAB-RAST2 = GTAB-RAST3 = GTAB-RAST4 = 0.
GTAB-RAST5 = GTAB-RAST6 = OBAD = GTAB-RAST7 = 0.
IF VERZUG LE 0. "future due
GTAB-RAST1 = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE1. "past due 1 to tage1 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST2 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE2. "past due tage1 to tage2 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST3 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE3. "past due tage2 to tage3 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST4 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE4. "past due tage3 to tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST5 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG GT TAGE4. "past due > tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST6 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
GTAB-RAST7 = GTAB-RAST1 - OBAD.
stab = gtab.
MOVE-CORRESPONDING GTAB TO STAB.
BC SUNILP 05/15/2007
IF ITAB_VBRP1[] IS NOT INITIAL.
GTAB-T_IND = 'X'.
LOOP AT ITAB_VBRP1.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-SORT_GSB = '1'.
GTAB_LINES-SUPER = ITAB_VBRP1-ZZMREP.
GTAB_LINES-REP = ITAB_VBRP1-ZZLREP.
GTAB_LINES-RAST1 = GTAB_LINES-RAST1 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST2 = GTAB_LINES-RAST2 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST3 = GTAB_LINES-RAST3 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST4 = GTAB_LINES-RAST4 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST5 = GTAB_LINES-RAST5 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST6 = GTAB_LINES-RAST6 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST7 = GTAB_LINES-RAST7 * ITAB_VBRP1-PERC.
GTAB_LINES-OBAD = GTAB_LINES-OBAD * ITAB_VBRP1-PERC.
COLLECT: GTAB_LINES.
ENDLOOP.
ELSE.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-T_IND = 'X'.
GTAB_LINES-SORT_GSB = '1'.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB_LINES.
ENDIF.
ENDIF.
EC SUNILP 05/15/2007
gtab-sort_gsb = stab-sort_gsb = '0'.
collect: gtab, stab.
gtab-gsber = stab-gsber = '****'.
GTAB-SORT_GSB = '1'.
IF REGIO = SPACE OR REGIO = GTAB-REGIO.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB, STAB.
ENDIF.
ENDIF.
END-OF-SELECTION.
TAGE1A = TAGE1 + 1.
TAGE2A = TAGE2 + 1.
TAGE3A = TAGE3 + 1.
IF SUMMEN = ' '.
sort gtab by bukrs land1 regio kunnr gsber sort_gsb.
sort gtab by bukrs land1 regio name1 kunnr gsber sort_gsb. "JAM
IF CONSOL = 'X'.
SORT GTAB BY LAND1 REGIO NAME1 KUNNR BUKRS KKBER GSBER SORT_GSB.
"TONYC
REPORT_TYPE = 'consolidated'.
ELSEIF NOT P_SUPREP[] IS INITIAL. "DEVK939546
SORT GTAB
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'super rep'.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSEIF NOT P_REP[] IS INITIAL. "DEVK939546
SORT GTAB "DEVK939546
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
"DEVK939546
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'rep'. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSE.
SORT GTAB BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'regular'.
ENDIF.
BC SUNILP 05/15/2007
DELETE ADJACENT DUPLICATES FROM GTAB COMPARING BUKRS NAME1.
LOOP AT GTAB_LINES.
IF P_REP[] IS INITIAL.
IF GTAB_LINES-SUPER NOT IN P_SUPREP.
DELETE GTAB_LINES.
ENDIF.
ELSE.
IF GTAB_LINES-SUPER NOT IN P_SUPREP OR GTAB_LINES-REP NOT IN P_REP.
DELETE GTAB_LINES.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT GTAB.
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
IF SY-SUBRC NE '0'.
DELETE GTAB.
ENDIF.
ENDLOOP.
EC SUNILP 05/15/2007
LOOP AT GTAB.
MOVE GTAB-BUKRS TO T001-BUKRS. READ TABLE T001.
RESERVE 5 LINES.
CASE REPORT_TYPE.
WHEN 'regular'.
IF HOLD_BUKRS <> GTAB-BUKRS.
IF SY-TABIX > 1. "TONYC
NEW-PAGE. SKIP. "TONYC
ENDIF. "TONYC
ENDIF.
PERFORM WRITE_CUST_INFO. "TONYC
PERFORM WRITE_DETAIL.
hold_bukrs = gtab-bukrs. "tonyc
WHEN 'consolidated'.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL.
WHEN 'super rep'.
IF GTAB-T_IND NE 'X'.
BC SUNILP 05/22/2007
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
EC SUNILP 05/22/2007
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
WRITE :/. "TONYC
ULINE. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL. "TONYC
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
AT END OF SUPER. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Super Rep:', "DEVK939546
GTAB-SUPER, '/', SUPER_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES STOT. "DEVK939546
REFRESH STOT. "DEVK939546
ENDAT. "DEVK939546
ELSE.
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB_LINES-KUNNR.
WRITE :/.
ULINE.
PERFORM WRITE_CUST_INFO.
ENDIF.
HOLD_KUNNR = GTAB_LINES-KUNNR.
PERFORM WRITE_DETAIL.
AT END OF REP.
SKIP.
RESERVE 7 LINES.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Rep:',
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES RTOT.
REFRESH RTOT.
ENDAT.
AT END OF SUPER.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Super Rep:',
GTAB_LINES-SUPER, '/', SUPER_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STOT.
REFRESH STOT.
ENDAT.
ENDLOOP.
ENDIF.
WHEN 'rep'. "DEVK939546
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF HOLD_REP2 <> GTAB_LINES-REP. "DEVK939546
NEW-PAGE. "DEVK939546
PERFORM GET_AND_WRITE_REPINFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_REP2 = GTAB_LINES-REP. "DEVK939546
IF HOLD_KUNNR <> GTAB_LINES-KUNNR. "DEVK939546
WRITE :/. "DEVK939546
ULINE. "DEVK939546
PERFORM WRITE_CUST_INFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_KUNNR = GTAB_LINES-KUNNR. "DEVK939546
PERFORM WRITE_DETAIL. "DEVK939546
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
ENDLOOP.
ENDCASE.
ENDLOOP.
ENDIF.
OP = ' '.
REFRESH GTAB.
IF NOT REPORT_TYPE = 'super rep'.
ULINE.
ENDIF.
SKIP 1.
IF SUMMEN = ' '. "if 'output totals only' bypass new-page
NEW-PAGE. SKIP.
ENDIF.
WRITE: /25 TEXT-030, 132 ONEBYTE, /25 TEXT-031, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STAB. "DEVK939546
TOP-OF-PAGE.
INTENS = SPACE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE: / SY-VLINE, 1 TEXT-001, DD_STIDA, 75 TEXT-051, 132 SY-VLINE.
ULINE.
WRITE: / SY-VLINE, 13 SY-VLINE, 30 SY-VLINE,
47 SY-VLINE, 58 TEXT-003, 81 SY-VLINE,
92 TEXT-003, 115 SY-VLINE, 118 TEXT-003, 132 SY-VLINE,
/ SY-VLINE, 02 TEXT-004, 13 SY-VLINE, TEXT-002,
30 SY-VLINE, 32 TEXT-018, 47 SY-VLINE,
50 '1', 54 TEXT-040, 57 TAGE1, 64 SY-VLINE, " 65 tage2,
67 TAGE1A, 72 TEXT-040, 75 TAGE2,
81 SY-VLINE, 83 TAGE2A, 89 TEXT-040, 91 TAGE3, 98 SY-VLINE,
101 TAGE3A, 107 TEXT-040, 110 TAGE4, 115 SY-VLINE,
117 TAGE4, 123 TEXT-017, 132 SY-VLINE.
ULINE.
SKIP 1.
SUMMARY.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
FORM write_tots *
--> PTAB *
FORM WRITE_TOTS TABLES PTAB TYPE TOT_TAB. "DEVK939546
CLEAR INTENS. "DEVK939546
FORMAT COLOR COL_HEADING INTENSIFIED OFF. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
WRITE /4 TEXT-101.
WRITE: /4 TEXT-102,
50 TEXT-100.
ENDIF. "tonyc issue #3047 end
ULINE. "DEVK939546
SORT PTAB BY BUKRS GSBER. "DEVK939546
LOOP AT PTAB. "DEVK939546
IF SY-TABIX > 1.
WRITE_TOTAL = 'X'.
ENDIF.
MOVE PTAB-BUKRS TO T001-BUKRS. READ TABLE T001. "DEVK939546
MOVE PTAB-GSBER TO T001-WAERS. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
PERFORM CONVERT_VALUES USING STAB-RAST1
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST2
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST3
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST4
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST5
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST6
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST7
STAB-GSBER.
ENDIF. "TOnyc issue #3047 end
MOVE-CORRESPONDING PTAB TO STAB.
COLLECT STAB.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
CLEAR HOLD_KKBER_DESC2.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC2 FROM T014T
WHERE KKBER = STAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC2 = 'Undetermined'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 6 STAB-GSBER, HOLD_KKBER_DESC2, SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
IF P_CONV = 'X'. "tonyc issue #3047 begin
T001-WAERS = 'USD'.
ENDIF. "tonyc issue #3047 end
WRITE: 13 STAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
HOLD_BUKRS2 = STAB-BUKRS. "TONYC ISSUE #2500
ULINE.
FORMAT COLOR OFF.
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
IF INTENS = SPACE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
INTENS = 'X'. "DEVK939546
ELSE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "DEVK939546
INTENS = SPACE. "DEVK939546
ENDIF. "DEVK939546
WRITE: / SY-VLINE, PTAB-BUKRS, PTAB-GSBER, SY-VLINE, "DEVK939546
(14) PTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE."DEVK939546
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ENDIF.
ENDLOOP. "DEVK939546
ULINE. "DEVK939546
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF P_CONV = 'X'. "tonyc issue #3047 begin
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF. "tonyc issue #3047 end
ELSE.
IF P_CONV = 'X'.
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF.
ENDIF.
SKIP 1. "DEVK939546
ENDFORM. "DEVK939546
*& Form GET_KNKK_INFO
text
--> p1 text
<-- p2 text
FORM GET_KNKK_INFO.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
get credit control area (KKBER) for comp code (BUKRS)
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = T001-KKBER.
IF SY-SUBRC = 0.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = T001-KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ENDIF.
ENDFORM. " GET_KNKK_INFO
*& Form SELECT_KNKK
text
-->P_KKBER Credit Limit Controlling AreaThis is a FI Aging report.
-
Sub report parameter prompt appears when running Visual Studio 2008 with Crystal Reports 2008
Post Author: relliott
CA Forum: .NET
If I build a simple Crystal Report that contains another simple Crystal Sub Report, the report will print preview fine in Crystal 2008. The problem happens when add this report to a Visual Studio 2008 Web Application Project and I build and debug the application, the Crystal Viewer is prompting the user for the parameter used to link the sub report to the main report. This should never happen as the user is not supposed to see this parameter. If I type in some value for this sub-report parameter prompt, the Crystal Report Viewer gives an error message about not finding the field.
I was having the same problem in Vs2005 with Crystal 10 which is why I upgraded. Business Object's official fix for this problem was published under their KB article number c2018840 and c2019047. These hot fixes ended up causing general exception errors in Visual Studio so I scrapped these solutions.
Support had me install SP0 for Crystal 2008 (which did not fix it).
Any ideas?
Any help is greatly appreciated.
Thanks,
Rich ElliottHi Bontrager,
Thank you for posting in MSDN forum.
According to your description, I agree with pvdg42's suggestion, so I suggest you can try pvdg42's suggestion to install the version of
Crystal Reports 10.5 to check this issue again.
Reference:
http://forums.asp.net/t/1236730.aspx?Which+CR+version+is+in+Visual+Studio+2008+
In addition, since this forum is
to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. So if you have any issue about the
Crystal Reports, I suggest you can ask the issue to the
SAP Crystal Reports website:
http://scn.sap.com/community/crystal-reports/content?filterID=contentstatus%5bpublished%5d~objecttype~objecttype%255bthread
as pvdg42 pervious suggestion, it will be better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Scheduled report with sub-reports (Encapsulating page failed).
Hello Everyone
I am fairly new to reporting and SAP.
I do have a main schedule report containing 4 sub-reports in the sections and 1 sub-report in the page header.
The report runs fine in the Infoview development folder, But whenever its deployed in system_testing folder, it doesn't open and gives the following error:
"ERROR IN FILE XXX:Encapsulating page failed."
I talked to DBA to change the permission for the user, but they don't agree. since its a scheduled report, user can only access the instance of the report, not to run it.
How can I make sure that the sub-reports don't run when user opens the report.
I appreciate any help in advance
Thanks and regards
MJHi All,
We have been facing the "Encapsulating page failed " error sporadic in our Crystal reports. It is not happening always.
We have tried with different user accounts, it did not help much. Also tried various suggestion from the following SAP Notes:
1536964 - Encapsulating page failed - The error change to Database error when the preference is changes
1211088 - Error message "Encapsulating Page Failed" - This is not the case with our reports, we still have some reports facing the same error without an subreports in it
1543412 - Infoview warning: "Error in File xxx : Encapsulating page failed - tried implementing the recommendation , but no help
1900672 - Error: Encapsulating page failed while viewing Crystal Reports based on stored procedures in BOXI 3.1 -- Our reports are not based on stored procedures.
We have faced this error in many different version of BOXI 3.1 like SP4.1, SP7.1, SP7.2. But the behaviour is similar. We have a clustered machine with 2 BOE servers and 2 Tomcat servers.
I have tried activating E2E tracing, but I really couldn't understand the reason for error from the logs. Our reports connect to datasource using webservices.
some information from the error traces.
Verkapseln der Seite nicht möglich.. Internal error: CrpeMgrPEEncapsulatePageEx
I would like someone to help me troubleshoot the problem. I can share the logs if needed. Please direct me to the correct forum if this is outdated.
Regards,
Prarthana -
No SAP Datasources or SAP Toolbar in Crystal Reports 2008
I cannot see the SAP toolbar or SAP datasources under "Create New Connection" in Crystal Reports 2008 SP1.
After reading many threads on SDN and reistalling Crystal Reports 2008 SP1 and the BOBJ SAP Integration Kit many times I have not been able to get this to work. I have installed the following in order:
- SAP GUI for Windows
Release: 710
Build: 1046700
Patch Level: 12
includes the BW 3.5 AddOn and BI 7 AddOn
Crystall Reports 2008 SP1 which I installed all components except Legacy XML Export.
Business Objects XI Integration Kit XI 3.1 for SAP which I installed all desktop components and all server components excluding web content and SDK. This was a local install on my PC.
I have ensured that I have only one instance of SAPLOGON.ini on my PC.
I have not applied the transports yet because I want to see the SAP datasources and SAP toolbar in Crystal Reports before I progress.
We do not have Business Objects Enterprise and I'm not sure what "BOE 3.1 Client Tools" is referred to earlier in this thread. My understanding is that in addition to SAP and BW we just need Crystal Reports 2008 and the SAP integration kit.
We are on ECC6 and BW 3.5.
I hope someone can help.Hi Stratos,
Thanks for your response. I finally got this working. My issue was that I originally used the Crystal Reports 2008 and BOBJ Int Kit downloads from the SAP support portal. I checked with another SDN user Steven Dierick - thanks Steven - for the version of Crystal Reports 2008 he was using (version 12.0.0.683).
I downloaded Crystal Reports 2008 version 12.0.0.683 and the BOBJ Int Kit from the downloads section of sdn and it works!! SAP Toolbar, datasources and everything.
Considering I'm using Crystal Reports 2008 SP0 are there any disadvantages of not using Crystal Reports 2008 SP1?
If I'm better off using SP1 where should I download Crystal Reports 2008 SP1 and the appropriate BOBJ SAP Integration Kit?
cheers,
John -
SAP Insider Conference on Reporting and BI - April 20-22, 2009
The first of five SAP Insider Conference semiars will be held next week, don't forget to register for the one closest to you!
SAP Insider Conference on Reporting and Business Intelligence with SAP and BusinessObjects
April 20-22, 2009 in Las Vegas, USA.
Other dates and locations include Orlando, Chicago, Boston and Frankfurt.
Registration and additional information including agendas and speakers can be found [here|http://www.biseminar.com/homepage.cfm?usergroup=us].Hi
I have access to nearly 10,000 SAP related industry presentations from various sources which I have been collecting over the years. I intend to provide links to the BI related presentations which are freely available. I have started with a post to this forum.
In regards to user group information in Australia I have been on the SAP Australian User Group executive for a number of years. SAP University Alliance members pay approximately $AUD500 annual membership for the user group. We have created best ERP student prizes ($500) for these university members so the membership dues are indirectly returned to the universities. It is up to each university to determine how they award these prizes. The best students are listed on the user group web site (www.saug.com.au). This encourages university membership in the user group and raises the profile of the user group with students. Approximately 50% of the university alliance members in Australia are members of the user group.
In addition I facilitate staff and students contact with member companies for the purpose of research. This tends to be in the format of interviews at our events rather than surveys.
We also utilise university staff at the user group events to conduct education sessions as a foundation to some of SAP's solutions. For example data mining 101, business process modelling 101, MRP 101. This brings academia and industry closer in the SAP ecosystem.
I hope this provides some ideas for the ASUG collaboration
Regards
Paul Hawking
SAP Academic Program Director
Victoria University
Australia
Maybe you are looking for
-
How to format external drive in MS/DOS
Hello. I have formatted my external drives in the past using MS/DOS. Today, Disk Utility does not have this option! I only have two Mac OS options and the Unix file system option. What gives? What is the Unix file system? Do I have to use this one no
-
MacBook Pro 17" appears to have 2x DVD writer?
I have just recieved my MacBook Pro 17". Burning a Dvd it could only run to 2x. Media is 1-8x so I went into the about mac window and it tells me that I have a MATSHITA DVD-R UJ-846: not capable of dual layer, or DVD +R That was the same as my old Po
-
Is it a bug of flex when loading wsdl?
Hi guys, I used this endpointuri http://localhost:8080/test/soap/myService?wsdl to call soap service. If I use browse to check this endpointurl, it will redirect to http://localhost:8080/test/my.wsdl. I have two .xsd files in the webapp base(ie., ht
-
Satellite M70-354 - Is the mainboard compatible with another one?
Hello guys, I have to replace the mainboard of a Toshiba Satellite M70-354 PSM70E. The inbuild mainboard is a K000033860, so is it compatible with any PSM70E mainboard avayable (K000XXXXXX)? Thanks for any help 5urprise
-
HT1430 need help with an ipod touch
I tryed my password and it did not work and now it is telling me to connect to itunes what should i do from there.