SAP EP6 preview

I am really confused by what is out there for installing SAP EP6 sneak preview. Right off the EP SDN main page is an article dated 10/12 that lists the components available - WebAS 6.40 SP7 on MSSQL, EP6 SP6, KMC SP6, DevStudio 2.07
I installed WebAS and was just checking that all works before going for EP6.
When I looke at the properties of the system after going to http://localhost:50000/index.html it shows that the kernel is: SAP J2EE Engine 6.30 SP7!!!!
I am worried this is not 6.40!
Can someone help?
Sid

J2EE Engine 6.30 SP7 seems like internal dev numberings.
This is indeed WebAS 6.40 SP7!

Similar Messages

KM error in SAP EP6 preview

i have just finished installing EP6 sneak preview with the KMC as given:
When I click on the "KM Content" link in EP, this is what i get:
java.lang.NoSuchMethodError: com.sapportals.wdf.ControllerDynPage.(Lcom/sapportals/wdf/ParameterConfiguration;Ljava/lang/Object;)V
     at com.sapportals.wcm.app.controller.ControllerServlet.getPage(ControllerServlet.java:64)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:58)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sapportals.wcm.app.servlet.WcmHtmlbBaseServlet.service(WcmHtmlbBaseServlet.java:81)
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:283)
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:627)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
Any ideas?
Sid

You have to update both: EP AND KM.
In case of the SP6 SneakPreview the update path is:
1.Installing SAP Web Application Server Java 6.40 SP7
2.Installing SAP NetWeaver Developer Studio SP7
3.Installing SAP Enterprise Portal 6.0 SP3
4.Updating SAP Enterprise Portal to SP6
5.Optional: Installing SAP Content Management and Collaboration SP3
6.Optional: Updating SAP Content Management and Collaboration SP6
See the Installation document from the Sneak Preview for more details.

Installation SAP Sneak Preview 7.0 EhP1 fails.

Hi all,
I want to install SAP Sneak Preview 7.0 EhP1, with the new WD4A features. I already had one installation that failed. Therefore, the official uninstall was not yet present in c:\sap\nsp\uninstall. So I had to delete all files and folders manually. I also used the registry cleaning tool, checked the host file and services file. But still, when trying to (re)install it, on the first check of the installation wizard, I keeps giving me the error, that there is already an NSP system running /installed, which in fact is not (no longer) true. What else should I do to overcome this error?
Kind regards,
Micky.
BTW. I already posted this question on other forum, but still no replies. Hope I have better luck here.

This is not an appropriate forum for the posting of questions about the Sneak Preview installation. There is a dedicated forum for such questions.

SSO to SAP EP6 (for Employee Self Service) using WebSEAL

Hi SDN friends,
We are about to embark on a SSO implementation using IBM WebSEAL for SAP EP6 ESS (Employee Self Service) connecting through to an SAP R/3 4.7 server. Since the ESS solution for 4.7 still uses ITS services, this means that we have ITS iViews in the EP6 portal.
We have managed to look through the whitepaper 'IBM Tivoli Access Manager - Single Sign On for SAP NetWeaver - September 2005' described at https://www.sdn.sap.com/irj/sdn/developerareas/ibm
We have the following queries, if anybody has a simple answer to these:
- Is it absolutely necessary to configure an SNC connection between ITS/EP6 and R/3 server to achieve SSO for the portal?
- Given that SAP EP6 references ITS IAC iviews, is it necessary for us to configure both ITS and EP6 for SSO, or can we simply configure EP6 for SSO? If so, is it also necessary to configure both for SSL?
- Otherwise, how easy is it to set up SSO in this scenario without SSL (for demo purposes)?
Any thoughts would be greatly appreciated.
Cheers
John Moy

Hello John,
regarding your questions:
ad 1) no. SNC is only mandatory if you use X.509-based SSO to R/3. You can also use SAP logon ticket-based SSO from EP to R/3 or usermapping that do both not require SNC.
ad 2) yes, you have to configure both EP and ITS at WebSeal.
ad 3) you can always omit SSL. However for production use, it is recommended.
Regards
Michael

SAP sneak preview installation error reg MaxDB

Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rte

Hi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas

Could not download SAP Sneak Preview - Java

Anyone managed to download SAP Sneak Preview - Java Edition recently? I can't dwnload it. Pls help.
Rgds,
Hapizorr Rozi Alias

Renald
Following path Downloads -> Web AS -> New! Sneak Preview -> Download file 1 ,
1.If simply click the Download 1 link ,it throws open another page with the FTP url appended but gives a Page cannot be displayed message then.
2.If on a right click I do a Save Target As..... then it returns an error saying that
Internet Explorer cannot download...akPrevJavaSPI11.part1.rar&df=0 from www.sdn.sap.com. The server returned extended information
Is there any other alternative or else what can be the problem?

Installation SAP Sneak Preview and Mini WAS 6.20 on the same computer?

Hi together,
I'm runnig the SAP Mini WAS 6.20 on my computer. Can anybody tell me, whether it is possible to install the 'SAP Sneak Preview ABAP full edition' at the same computer?
Or will that cause problems?
Thank you for your help!
Eva

Eva,
this is not a problem, goahead with the installation.
Make sure you met all the installation prerequisites.
Thanks
Sarath.

Deploying Cognos Portlets in SAP EP6

Hello,
While deploying Cognos IViews on EP6 I'm getting this error:
"Unable to process the request.
CPS-CCM-1204 The method "initCookie" of the Markup interface failed.
CAM-AAA-0055 User input is required. CAM-AAA-0126 The call to RfcOpenEx failed. This system rejects all logons using SSO tickets
A more detailed description of the error that occurred can be found in the log."
I've already defined the Cognos system on the portal and user mapping settings.
Thanks,
Tomer.

Yes is a separate product with its own DB.
If you are asking if you can have EP as in the same box as R/3 I would advise to have it separate. If possible you can even shutdown the Java stack in R/3 and free the CPU and memory for R/3.
Well the reasons I could think of to have it separate.
1) For better box utilisation. A dedicated box for R/3 will free it for R/3 centric tuning and EPs box for a Java centric tuning.
2) Even if you have R/3 server is down for maintenance you can have your EP running to serve other applications or atleast show that ESS and MSS will not be available.
3) Even the load balancing scenarios for EP and R/3 differ ,from one side you would have the R/3 message server serving the load for R/3 and from the other side a different lb or SAP Web dispatcher managing the load for EP.
4) You might also want to take different upgrade strategies for EP and R/3
5) As for MSS having constant calls to R/3 and if any one claims that is a performance hit , you can have a dedicated high speed link between the two of them.
Regards
Pran

Ad Hoc Workflow with SAP EP6

Hi,
I have to configure Ad Hoc workflow with EP6. How can I configure it? Any document will help me.
Is Universal Worklist cofiguration is also required for Ad Hoc Workflow?
Regards,
Manish

try this link
http://help.sap.com/saphelp_nw04/helpdata/en/8f/fb5464e3382f4482833a28af8896a3/frameset.htm
Click on Administration guide, basic configuration, this will start to walk you though the configuration of collaboration. Ad hoc work flow is a part of the Universal Worklist. The Universal Worklist is the aggregation of your R3 workflow tasks plus your Ad Hoc workflow tasks.

Successfull Installation of SAP NW Preview but one issue pls urgent

Hi All,
I was insatlled SAP NetWeaver Sneak Preview Java Edition SP16. I am done installation successfully, but after starting SAP Management console(it also started successfully all are green), then I entered this url in browser http://localhost:50000/irj/portal it is asking me to enter user name and password. I entered user name my admin user name as 'SAP' and password as 'Madison'. But Its says user authentication failed. What can I do now please suggest me.
<b>One more important thing is that when I was installing this its created two more users in my Win XP SP2 OS that user are 'j2eadm' and 'SAPServiceJ2E' with Admin rights for this I entered passwords while installing 'Madison'.
My question is why it created these two user for me unneccessarly, and this is the reason why I am not able to login. Please suggest me and help me.</b>
Thank you in advance,
Ashok Reddy

Ashok,
take a look in the html docs of your version of sneak preview where all required users and passwords are listed. In SP16 the initial account for EP is:
username: Administrator
password: abcd1234

How to revert back User Management changes with SAP ep6

Hi,
While implementing sso for R/3 with sap EP, we did some changes in SAP System of UM configuration, after that we are not able to login with existing super user.
We changed the existing userid SAPJSF to some other value in SAP system of UM. This is causing the problem.
How can I revert back the changes as currently I am not able to access the UM Configuration?
Which file can be change for reverting back the changes?
Thanks,
Manish

Hi Heiko,
I restarted server two times but it does not work. I also reverted the changes from propertysheet as well. Still it does not work.
After that I looked in defaultTrace.trc file and found the exception <b>[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible</b>
The exception detail is below:
1.5#0011435A6406001D0000000F000013E80003FB0CCFA7CC82#1120457372187#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:531)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: User is locked. Please notify the person responsible
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:2099)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:2315)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:280)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:528)
     ... 6 more
Can you please tell me that how can I unlock the user as my portal is not coming up. Your reply will be helpfull to me.
Warm Regards,
Manish

Integration between SAP EP6 SP2 and Documentum WebTop Application

Hi all,
We are try to integrate de WebTop Application with the EP6 SP2 using SSO Ticket or using the User/Passward actually logged on EP6, but do not using the User Mapping
Somebody have this experience?
Thanks in advance.
Talis Treichel

Hi Talis Treichel,
Have you found any solution to solve this? I am having a similar scenario in my project and I am using App Integrator for integrating Documentum Webtop
via user id pwd mapping.
But it is giving me an error saying java.lang.null pointer exception.
I guess the parameters its not taking.
Here are some details:
Main Page: http://<server>:<port>/webtop/component/main?Reload=1137919145246&_dmfFrameId=Login_dialog
This page contains user id and pwd.
The view source of this page contains the below information:
<form name=Login_0 action=/webtop/sdk/system/login/login.jsp method=post>
<input type=text name=Login_username_0 id=LoginUsername> <input type=password name=Login_password_0 id=LoginPassword>
Based on the above info I gave the following:
URL Template: <System.protocol>://<System.server>:<System.port><System.uri>?<Authentication>
URL template fraction for user mapping: Login_username_0=<MappedUser>&Login_password_0=<MappedPassword>
Authentication method: POST
Please help how can we solve the null pointer exception problem
Regards
Umamahesh

EP6 / SAP 4.6B IDES connection and usage?

Hi, I have recently installed SAP R/3 4.6B IDES and just wondering what development I can do using EP6 SP9 sneak preview with SAP IDES?
Can anyone please let me know how to create system landscape for SAP IDES in EP6 portal? I'm currently using the default user DDIC, how can is create a client copy of DDIC as a different user?
I assume SAP IDES is very similiar to the SAP R/3 realtime systems, so please let me know from your experience what all developments I can do using EP6 with SAP IDES?
Thanks
Siva

Hi Raj, thanks for your reply. I think the development you have mentioned is more of a R/3 developement, if I'm not wrong. I'm new to SAP EP6 Portal development and I'm using EP6 sneak preview SP9, and also doing some development in EP5.
Your example says based on R/3 user profile, we can map it to EP? Could you please tell me if ESS and MSS packages are installed with SAP R/3 IDES installation?
I'm interested in more of retrieving data from IDES and displaying it in EP using JCo, SAP Connector architecture, BAPI calls, SAP Transaction iView, ESS, MSS and any more development? Any help url I appreciate.
Thanks
Siva

Error during Installing SAP Netweaver 7.0 SR3 Sneak Preview

Hi All,
I am trying to install the SAP Sneak Preview currently available in the SDN.
There are 40 steps involved in the process and i am able to get through 39 steps successfully.
On the 40th step, (Install minimal configuration), it tries to start the J2E instance.
This fails. The SDM and dispatcher load sucessfully, however the Server 0 fails to load giving -2 exitcode and below is the developer trace.
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 3196] JLaunchIAbortJava: abort hook is called
[Thr 3196] **********************************************************************
ERROR => The Java VM aborted unexpectedly.
Please see SAP Note 943602 , section 'Java VM crashes'
for additional information and trouble shooting.
[Thr 3196] JLaunchCloseProgram: good bye (exitcode = -2)
I have tried varying the -Xms and -Xmx properties, but still fails.
Could you please help me fix the same.
Regards,
Tanveer.

Hello Tanveer.
Please mark this thread as aswered.
And If u found my reply useful then please reward points.
Cheers
Shailesh Mamidwar

SAP NetWeaver Composition Environment Sneak Preview

Hi,
By installing the SAP NetWeaver Composition Environment Sneak Preview - Java EE along with SAP Sneak Preview ABAP stack can I make use of the new BI 7 features like IP, report designer...
Thanks,
sam

Hi,
So, the download is done. But now I have a problem with the installation. I couldn't find any post explaining the same problem. My installation ends with message: The installatin of SAP NetWeaver CE 7.1 is finished, but some serious errors occured during the install. Please see the installation log C:\usr\sap\CE1\insthome\primaryApplicationServer\work\install.log for details.
the installation log contains among other things following lines:
Jun 19, 2007 11:33:19 AM [Info]: Start PREPARE_AUTOSTART_DB [com.sap.xpf.controller.StepLibraryExecutionStep]
Jun 19, 2007 11:33:19 AM [Info]: at:   2007.06.19 - 11.33.19[yyyy.MM.dd - HH.mm.ss]
Jun 19, 2007 11:33:19 AM [Info]: execute step setSDBAutoStart
Jun 19, 2007 11:33:19 AM [Info]: setACLWin on WIN with null(WIN MAX)
Jun 19, 2007 11:33:19 AM [Info]: execute task setACLWin
Jun 19, 2007 11:33:19 AM [Info]: TASKENGINE: execute task setACLWin
Jun 19, 2007 11:33:19 AM [Info]: looking for method setPermission
Jun 19, 2007 11:33:19 AM [Info]: looking for method setNode
Jun 19, 2007 11:33:19 AM [Info]: looking for method setGroup
Jun 19, 2007 11:33:19 AM [Info]: set full controll for group LOCAL SERVICE on C:\sapdb\data\wrk
Jun 19, 2007 11:33:42 AM [Info]: End PREPARE_AUTOSTART_DB [com.sap.xpf.controller.StepLibraryExecutionStep]
Jun 19, 2007 11:33:42 AM [Info]: rc:   1
Jun 19, 2007 11:33:42 AM [Info]: at:   2007.06.19 - 11.33.42[yyyy.MM.dd - HH.mm.ss]
Jun 19, 2007 11:33:42 AM [Info]: duration:   00:00:22[HH:mm:ss]
Jun 19, 2007 11:33:42 AM [Info]:
Jun 19, 2007 11:33:42 AM [Info]: Error during executing
Jun 19, 2007 11:33:42 AM [Info]: End Controller
Jun 19, 2007 11:33:42 AM [Info]:   at          : 2007.06.19 - 11.33.42[yyyy.MM.dd - HH.mm.ss]
Jun 19, 2007 11:33:42 AM [Info]:   durationt   : 00:02:33[HH:mm:ss]
Jun 19, 2007 11:33:42 AM [Info]:   status   : ERROR
How can I handle this error message.
Thanks!
Mehmet
Message was edited by:
        Mehmet Pamukci

SAP EP6 preview

Similar Messages

Maybe you are looking for