SAP ERP 6.0 EHP4 upgrade from R/3 4.7 NUC
We have R/3 System which is 4.7 Non-Unicode. We are not using MDMP and only have single code page. Can I upgrade directly to Non-unicode version of ERP 6.0 EHP4 or do I need to use CU & UC. I read some where that EHP4 cannot be used on Non-Unicode versions.
> 2 years later, we installed EHP4. We are still non-unicode.
If you don't use Portal or other Java application that's fine. As soon as Java comes into place the backend system must be Unicode:
Note 975768 - Deprecation of Java features with non-Unicode Backend
Markus
Similar Messages
-
SAP ERP 6.0 EHP4 upgrade from SAP R/3 4.7 1.10
Dear Experts,
Our client is going to upgrade current landscape SAP R/3 4.7 1.10 to ERP 6.0 EHP4. The Source system O/s is AIX 5.3 and database is db2 8.1. Client procuring new hardware for the target release ERP 6.0 landscape and the O/s is going to be AIX 7.1 and databse would be db2 9.7 FP3.
As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Thanks and Regards,
SeshuSeshu Mannepalli wrote:
> As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
>
> Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Hello,
You can go ahead for IMPORT with DB 9.7.
We completed an OS/DB Migration Project (which involves system copy using EXPORT/IMPORT) and we utilized direct newer version of DB2 on the target during IMPORT.
But please confirm whether the kernel of your release would work fine with DB 9.7 or not. Otherwise, there is no problem in going for higher version of DB2 here.
Small question - Why you want to test the Mock Upgrade on DB2 version which is different than the current version on production server ? Or are you planning to upgrade your current DB2 8 to DB2 9.7 BEFORE the SAP Upgrade on all the servers - then the testing is OK I think (however OS is still the different - Or may be you will go for system copies for this too !)
Thanks -
Best Practise on SAP ERP 6.0 EHP4
Hi Tech gurus!
I'm Luckshmanan from Bangalore,India.
We installed SAP ERP 6.0 EHP4. Now, we need to install the Best practice in the same system.
How to do that?
With regards,
Luckshmanan.Hi Luckshmanan,
You can install Best Practise addon BP-ERP 604V2 on your SAP ERP 6.0 EHP4 system as per note 1425037.
BTW, the latest version BP-ERP 604V3 is to be released in June 2010. Maybe you can wait until BP-ERP 604V3 is released.
With Best Regards
Julia Song -
Install SAP ERP 6.0 EHP4 Appl Srv FJS-00003 and FCO-00011 Error
Hello to all
i will Install an Linux Appl Srv (SLES 10 SP3) for our Windows 2003 x64/Oracle 10.2.0.4 SAP ERP 6.0 EHP4 Central Instance but i get the following errors
ERROR 2010-10-28 11:35:47.149 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
ERROR 2010-10-28 11:35:48.796 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
i have found some Instruction to set JAVA_HOME, SAPINST_JRE_HOME .. but his not helps.
Here the System Settings
SUSE SLES 10 SP3
InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM
NW_7.01_SR1_Kernel_Linux__OS_400
ORACLE 10.2 64-BIT / ORACLE 10.2 32-Bit / Client / Number 51033272
sap-locale-1.0-25.7.1.x86_64.rpm
sapinit-3.0-1.13.1.x86_64.rpm
saplocales-2.4-4.x86_64.rpm
sapinst stared as root
profile and global directory from windows mounted to /sapmnt/E12/
cat /etc/profile.d/alljava.sh
export JAVA_HOME=/opt/j2sdk1.4.2_19
export JDK_HOME=/opt/j2sdk1.4.2_19
export SDK_HOME=/opt/j2sdk1.4.2_19
export JRE_HOME=/opt/j2sdk1.4.2_19
export SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
export JAVA_BINDIR=$JAVA_HOME/bin
export PATH=$PATH:$JAVA_HOME/bin
cat /etc/profile.d/alljava.csh
setenv JAVA_HOME /opt/j2sdk1.4.2_19
setenv JDK_HOME /opt/j2sdk1.4.2_19
setenv SDK_HOME /opt/j2sdk1.4.2_19
setenv JRE_HOME /opt/j2sdk1.4.2_19
setenv SAPINST_JRE_HOME /opt/j2sdk1.4.2_19
setenv JAVA_BINDIR $/bin
setenv PATH $:$/bin
export tels me
declare -x JAVA_BINDIR="/opt/j2sdk1.4.2_19/bin"
declare -x JAVA_HOME="/opt/j2sdk1.4.2_19"
declare -x JDK_HOME="/opt/j2sdk1.4.2_19"
declare -x JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x PATH="/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin"
declare -x SAPINST_JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x SDK_HOME="/opt/j2sdk1.4.2_19"
setenv tels me
JRE_HOME=/opt/j2sdk1.4.2_19
SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
JAVA_BINDIR=/opt/j2sdk1.4.2_19/bin
PATH=/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/bin/X11:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
JAVA_HOME=/opt/j2sdk1.4.2_19
SDK_HOME=/opt/j2sdk1.4.2_19
java -version
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
i hope somebody can help me
best regards
Oliver
Edited by: Oliver Fischer on Oct 28, 2010 12:09 PMHello Markus
here the last lines
ERROR 2010-10-28 14:27:11.986 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
TRACE 2010-10-28 14:27:12.435 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 12509
TRACE 2010-10-28 14:27:12.584 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 12510
ERROR 2010-10-28 14:27:13.283 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > Application Server > Oracle > Dialog Instance( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)). You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/LM/AS/ORA/DI. </p> </body></html>
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Oliver -
Issue in extraction phase in ERP 6.0 EhP4 upgrade
Hi All,
We are having issues in the Extraction phase of the ERP 6.0 EhP4 upgrade.
The system is being upgraded from ERP 6.0 SR3 to EhP4.This is on windows server 2003 with Oracle 11 G as backend.
In the extraction roadmap in phase "PREP_IMPORT/SUBMOD_TOOLIMPORT_POST/RUN_GENPUTTBSHD",
we are getting the following error message and this is not allowing us to move forward though the background job "RS_GENERATE_PUTTB_SHD" also has completed successfully.
"Missing log file of report "RS_GENERATE_PUTTB_SHD", matching "RS_GENERATE_PUTTB_SHD\.RDI"."
Any help on this is highly appreciated.
Thanks in advance.
Regards,
Murali Narayanan
Edited by: Murali Narayanan on Jun 10, 2011 2:03 PM
Edited by: Murali Narayanan on Jun 10, 2011 2:05 PM"Missing log file of report "RS_GENERATE_PUTTB_SHD" --> for this error, i would guess that this RS_GENERATE_PUTTB_SHD phase failed to run which cause no log to be generated. Try to find out what caused it failed.
go to $DIR_PUT/log, sort descending all the log by modified time, check top most logs one by one until you figured out the cause of the failed process. -
New Functionalities on SAP FI side in SAP ERP 6.0 EHP4 & SAP ERP 6.0 EHP5
Hello Team
I am a FI consulant and now i would like to know the functionalities avialable in SAP ERP 6.0 EHP4 and SAP ERP 6.0 EHP5. So i request you to pleasae check and provide me answers to the below points for my understanding
1. What are the new functionalities added in SAP ERP 6.0 EHP4 on SAP FI side.
2. What are the new functionalities added in SAP ERP 6.0 EHP5 on SAP FI side.Finally what is difference between EHP4 and EHP5, i mean in the point of SAP FI functioanliy.
In the meantime, please provide me the links where i can get complete information on the new functionalities added on FI side in these Enhancement Packages (ie 4/5).
Yours answers would help me a lot to understand the concept.
Regards
SreeEnhancements packages contains tens to hunderds of new or changed functionalites (called business functions). After installing an enhancement package you can activate the business functions which can be usefull to you.
To have an idea which business function can be usefull, you can use the business function prediction. Based on the (FI) transactions you use in the system, it gives an advice which business functions in an enhancement package should be activated.
See http://www.sap.com/solutions/business-suite/erp/enhancement_packages/business-function-prediction.epx
and http://service.sap.com/erp-ehp -
EHP4 upgrade from ECC 6.0
Hi experts,
We are planning to upgrade to EHP4 from ECC6.0
We have the following systems installed on non-unicode,
SAP ECC 6.0
SAP NETWEAVER 7.0
SAP SRM 3.0
Currently, we have customized ESS java webdynpro on our ESS portal, with the EHP4 upgrade and EHP1 on SAP Netweaver 7.0, would there be any implications to the customized ESS iviews ?
Our ECC 6.0 is on a non-unicode system, is it advisable to take this opportunity to convert to a unicode for scalability aspect ?
what would be the implications if we remains as non-unicode after EHP4 upgrade ?
All advices are appreciated !!
Thanks in advanceHi,
You can find all the relevant information at the below link,
https://service.sap.com/erp-ehp
Regards,
Vishnu -
Technical Usage for SAP ERP 6.0 EhP4
Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2 XSS XSS Self Services
SAP ERP 2005/SR2 LSOCP LSOCP Learning Solution Content Player
SAP ERP 2005/SR2 BD BD Biller Direct
SAP ERP 2005/SR2 XECO XECO Extended E-Selling Components
SAP ERP 2005/SR2 ECC ECC Central Component
SAP ERP 2005/SR2 BP-ERP BP ERP Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2 PI PI Process Integration
SAP NetWeaver 2004s/SR2 BI BI Java BI Java
SAP NetWeaver 2004s/SR2 AS AS Java Application Server Java
SAP NetWeaver 2004s/SR2 EPC EP Core Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2 EP EP Enterprise Portal
SAP NetWeaver 2004s/SR2 AAS AS ABAP Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha ChaHello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ -
SAP ERP 6.0 EHP7 upgrade optimal resources
Hi,
I am performing EHP7 up gradation on SAP ERP 6.0.
SYSTEM H/W: 8 CPU's 50 GB RAM
OS : windows server 2008 R2
DB: oracle 11.2.0.5.0
SAP source release : ERP 6.0
SAP target release : ERP 6.0 including EHP 7
I have performed above said activity on test system / development system / quality system /production system. The time to complete different systems varied beyond my expected/planned values.
I understood that there are users logged into production system till pre processing stage of SUM tool.So the long running phases (ACT_UPG , SHADOW_IMPORT , etc ) took approximately double the time than other systems.
May i know various other other reasons ,for productions system , which reduces performance (in terms of run time).Is there any ways to improve performance (in terms of run time) .
I have increased R3trans processes,Batch process to higher values during configuration phase of SUM tool.What are the optimal values which can be given in for fast upgrade.
thanks & regards
uday reddyFirst read the SAP note 1616401 - Understanding parallelism during the Upgrades, EhPs and Support Packages implementations to understand how you can make use of parallelism when you are doing an upgrade. There is no point in having more R3trans processes assigned when there is no sufficient resources available on the server. In order to make effective use of this you should make sure there is enough CPU and memory available on the system.
The activation phase is expected to run for a long time but there are possibilities to improve the performance by adapting the memory parameters of the shadow system. You may refer to these SAP notes 1674812 - Performance improvement for ACT_UPG
1223360 - Composite SAP Note: Performance optimization during import
1897538 - Long runtimes when accessing DD27S in ACT_UPG phase
Regards
RB -
Upgrade from ERP 6.0 with AFS 6.0 to ERP EHP4 - AFS 6.4
Dear all,
I've upgraded our Solution Manager to latest maintenance (all latest release/all latest Sp/all Oss notes)
I 'm unable to have a queue with EHP4 - Afs 6.4 from Solution Manager
If I define a system as SAP ERP 6 with Afs, the sol. man. give me the option to upgrade to EHP4 but 'forget' AFS 6.4.
If I define a system as Afs Server 6, the sol. man doesn't show me the option to upgrade to EHP4.
Any Idea to exit from this stall condition ?
If I choose the option SAP ERP 6.0 to upgrade to EHP4, SAPHEPI will ask me the AFS upgrade CD and all AFS Sp ?
My target is:
- ERP 6.0 SPS 16 with AFS SP8 + ERP 6 EHP4 SPS 4 with AFS 6.4 SP 2, the max possibile now.
Thanks tho who will try to help me.
RegardsHi Reena
Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
before that is any other SAP system are connected to ECC6 ?
If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
1388258 - Version Interoperability within the SAP Business Suite
BR
SS -
Upgrade from 4.6C to ERP6.0 EHP4 NW7.01 fails on EHP_INCLUSION
Hello dear friends at SDN forums,
We are performing an upgrade from a 4.6C Non Unicode source release to a SAP ERP 6.0 EHP4 based on NW 7 EHP1 Non Unicode.
Every phase has gone more or less fine until the current phase EHP_INCLUSION in SAP EHPI tool.
We are trying to specify the stack file manually, cosu00B4 SAP EHPI does not find it automatically via RFC against Solution Manager. I donu00B4t discard a possible missconfiguration in the RFC destination "BACK" configuration (the one that points from our target system to the Solution Manager), but thatu00B4s another story.
Anyway, that shoulnu00B4t be relevant for the trouble Iu00B4m expressing.
As we are on source release 4.6C I must make use of the .txt stack file and not the .xml file, as per SAP notes.
The symptom: everytime I retry that EHP_INCLUSION phase, it complaints about "Sever errors detected. Error Code = -1. Reason: The stack configuration does not contain a product stack".
Iu00B4ll also paste here the contents of the EHP_INCLUSION.log trace file:
1 ETQ201 Entering upgrade-phase "EHP_INCLUSION" ("20100715150020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "D:\usr\sap\CES\SYS\exe\run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399 default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "
dbapru001\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20100715150020
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100715150024
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "C:\SMSDXML_CES.txt"
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration does not contain a product stack")
That file was generated from Solman Mopz, was saved with a short path name just in case it could be problematic.
The Solman is on version NW 7 EHP1. Our 4.6C SPAM version is 50 (the latest available).
Iu00B4ve been fighting this issue for several days unsuccessfully, and it seems like thereu00B4s no documentation on it.
Iu00B4ve re-read SAP notes , master, EHP and upgrade guides several times, and also similar problems (but not exactly the same as mine) here at SDN forums.
Besides, now Iu00B4m having a problem to create customer messages to OSS which will last a few days (due an issue with our old installation number in SAP Service Marketplace). Thatu00B4s why Iu00B4m trying to obtain support from this forum, before we can obtain a response from SAP OSS.
Has anybody experienced something similar?
Thanks in advance for your help.
JavierHi FDK,
As far as I´m concerned, I promise I will write how we solved it when we get it.
The news are: at last we could create a customer message to SAP Support, and SAP has told us to:
1) Ensure that our Solution Manager is in a sufficiently high SP Stack level. In our case, as we have a Sol. Manager based on NW 7 EHP 1 with SP Stack level 20, they are asking us to apply SP Stack level 22 as first meassure.
2) In case we cannot afford to do the mentioned meassure immediately, then they suggest us another possibly working option: to downgrade our SPAM 4.6C from level 50 to 48. There is a SAP Note that explains how a reimport of a Support Package for SPAM can be done (and it seems like it´s even possible to downgrade the SPAM level, I didn´t know that):
SAP Note 684564: Re-importing a SPAM/SAINT update
So, now we are working on these suggestions. As the Solution Manager is really not "ours", but belongs to our SAP VAR (partner), we need to wait until they can schedule this technical task.
So, right now the immediate task I´m trying to perform is downgrading our SPAM 4.6C from level 50 to 48.
But, I have a problem and have just let know it to SAP in the customer message: I have no way to get such level 48 of SPAM 46C. SAP always only hosts the last (or the 2 most recent as much) version of SPAM in the Software Download Center of SAP Service Marketplace. Thus, right now if you navigate in SAP Service Marketplace you´ll only find the 50 level version of SPAM 4.6C. I´m again waiting for SAP ´s response concerning this.
Best regards,
Javier -
Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and 51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
JuliaHello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia -
SAP R/3 4.6B to ECC6 EHP4 Upgrade
Hello,
We are on SAP R/3 4.6B and are in the process/plan of Upgrading to ECC 6...
Is it possible to directly go to EHP4 in a single downtime..?
I am trying to finf the Source/DVD's from the market place but unable to locate one...
Is it possible or should we go to EHP3 only?
If someone has link/path for the software download , kindly help...
Thanks,
RaHuL...[http://service.sap.com/swdc|http://service.sap.com/swdc]
- download
- Installations and upgrades
- installations and upgrades - Entry by Application Group
- SAP Application Components
- SAP ERP
- SAP ERP Enhance Package
- EHP4 for SAP ERP 6.0 / NW 7.01
Here you should read the info page carefully.
Download the Master Guide and read it to find out about how to perform the upgrade.
- Installation and Upgrade
- <Database Platform>
There is your media. Please note that it is both Installation and upgrade media
and also both ERP and SRM media
In order to get the kernel etc you have to select (instead of "Installation and Upgrade --> Database Platform")
- SAP EHP1 FOR SAP NETWEAVER 7.0
- Installation and Upgrade
- <Operating System>
- <Database Platform>
There is your media together with installation and upgrade for the Netweaver platform (used when upgrading BI etc).
Please note that you also need the Maintenance Optimizer configured in Solution Manager in order to download
(actually you approve them for download) support packages etc from the Service Marketplace. -
Can't find upgrade master dvd for ERP 6.0 EHP4 !
Where can I find the upgrade master dvd for upgrade to ERP 6.0 EHP4 (windows/oracle) ? Does anybody knows the right materialnumber?
My collegues has copied the relevant dvds from sap upgrade dvd-package to disk and I don't find th "upgrade master dvd" with STARTUP.BAT.
I looked into download area service.sap.com/swdc:
My Company's Application Components->SAP ERP->SAP ERP ENHANCE PACKAGE-> EHP4 FOR SAP ERP 6.0 / NW7.01
but there are only upgrade export dvs, language dvd, etc, but NO Upgrade master dvd, too!!!
Kind Regards,
UtaDear Ute,
i use this one "Number 51036889"
it is the Upgrade Master from NW701 which is also for EHP4.
Its located under the EHP1 Tree:
Installations and Upgrades" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" SAP EHP1 FOR SAP NETWEAVER 7.0.
hope this helps
Regards
Bjoern -
RUN_RSPTBFIL_PDIST failed during SAP ERP 6.0 upgrade
Hello,
I am performing an SAP ERP 6.0 ABAP upgrade. The source release is SAP R/3 Enterprise 47x200 running on an AIX 5.3 64 bits unix server.
When running the RUN_RSPTBFIL_PDIST phase the upgrade assistant stop and shows an error messahe like this:
BATCH RSPTBFIL FAILED
ERROR: error(S) found in the log(s), acumulated in RSPTBDST.ELG
When trying to skip this phase a password is required.
Please, see the log files:
RSPTBDST.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUTTB_SHD post distribution actions ERRORS and RETURN CODE in RSPTBPOD.QAT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETG011 "[MODEFLAG]""EMERGENCY BREAK: Kein Modeflag für Tabelle:""SFHYT"
RSPTBDST.LOG
1 ETQ201XEntering upgrade-phase "RUN_RSPTBFIL_PDIST" ("20080510133220")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=1
4 ETQ010 Date & Time: 20080510133220
4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_POSTDIST" in batch
4 ETQ359 RFC Login to: System="QAT", Nr="01", GwHost="cgsapqa2", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSPTBFIL" with job count "13322001" scheduled
4 ETQ359 RFC Login to: System="QAT", Nr="01", GwHost="cgsapqa2", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20080510133455
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ399 ext. env.: DIR_LIBRARY=/upgrade/put/exe
4 ETQ399 ext. env.: LIBPATH=/upgrade/put/exe:/usr/lib:/lib:/usr/sap/QAT/SYS/exe/run:/usr/java14/jre/bin:/usr/java14/jre/bin/classic:/oracle/QAT/102_64/lib
4 ETQ399 2008/05/10 13:34:56: put_execute: (tp) forkpid:663864
2EETQ241 Errors found in logfiles - accumulated in file "RSPTBDST.ELG"
1EETQ203 Upgrade phase "RUN_RSPTBFIL_PDIST" aborted with errors ("20080510133456")
RSPTBPOD.QAT (some entries)
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETG039 -
4 ETG011 " "
4 ETG036 Module name....: "RSPTBFIL"
4 ETG038 Log name .: "RSPTBPOD.QAT"
4 ETG040 Start time.....: "10.05.2008" "11:56:56"
4 ETG011 " "
4 ETG039 -
4 ETG011 "-- POSTDIST MODEFLAG RSPTBPOD.QAT --"
4 ETG011 "[MODEFLAG] /OSP/V_RAUI_TMVD -> MODEFLAG = V"
4 ETG011 "[MODEFLAG] /OSP/V_RAUI_TPBD -> MODEFLAG = V"
4 ETG011 "[MODEFLAG] /OSP/V_RAUI_TPDB -> MODEFLAG = V"
4 ETG011 "[MODEFLAG] /OSP/V_RAUI_TPRD -> MODEFLAG = V"
4 ETG011 "[MODEFLAG] /OSP/V_RAUI_TRGD -> MODEFLAG = V"
4 ETG011 "[MODEFLAG] /SAPDMC/LISCREEN -> MODEFLAG = A"
4 ETG011 "[MODEFLAG] /SAPDMC/LSCDOCU -> MODEFLAG = A"
4 ETG011 "[MODEFLAG] /SAPDMC/LSCDOCUT -> MODEFLAG = A"
4 ETG011 "[MODEFLAG] /SAPDMC/LSCPROGS -> MODEFLAG = A"
4 ETG011 "[MODEFLAG] /SAPDMC/LSCRULE -> MODEFLAG = A"
The cluster table shown in the RSPTBDST.ELG SFHYT is activated but the database object and the runtime object has inconsistencies. ¿Does this have something to do with the problem?
Please, I would appreciate some feedback from you guys...
Thanks
Luis AlbertoCheck this note, though not applicable to your upgrade version. This can give you some clue.
Note 788768 - Problems during upgrade in the phase RUN_RSPTBFIL_DEST
Also try to stop the Shadow instance, restart it manually and try to repeat this phase.
Maybe you are looking for
-
Is there a maximum number of contacts in an Address Book group?
I have 4,367 contacts. I'm trying to create two different groups, one for my wife and one for me. The majority of the 4,367 contacts will be in my group. I've tried several time but keep getting the same result. On the iCloud website I create a new g
-
Overlay a graphic on a Pie Chart, & Rotate text in a Pie Chart
Is it possible to overlay a graphic on a pie chart? I've tried manipulating the Wrap Inspector, but regardless, when I paste a graphic on topic it drops below the pie chart and deletes one segment of the pie. In a related pie chart question, is it po
-
Has Adobe solved the crashing issues for Premiere Elements 10?
Hi there, I've been using Adobe Premiere Elements 8 for about 2 years now. I do like this program and appreciate it being quite a straight forward, uncomplicated, video editing program. One thing which really annoys me about it, however, is its
-
What is the best way to get a ratio between two waveforms?
I'm reading in multiple channels on a PCI 6143 and I want to get the Voltage Standing Wave Ratio (VSWR) between two channels. Right now I have a choice of outputting a 2D DBL or 1D waveform from the daqmx read vi. With the 2D DBL I can use a For Loop
-
Moved hosting of email and now can't send or receive emails
did a search on the forum but can seem to find a solution to my problem. so has any one ever had any problems with removing an email account (with estreet) and then adding a new account (with Dreamhost.com) to a blackberry? it is the same email addr