Sap erp(data base ) not conneted
Hi Gurus ,
I am getting problem while starting sap server it showing the status disp+work.exe is stopped and in system log error is data base :ora-01033 pls help in this regards
Points will be rewarded.
Mail me : [email protected]
Regards.
Madhukar Reddy. A
ORA-1033 = Oracle intialization or shutdown in progress
is the database started?
the oracle listener is up and running?
try :
> lsnrctl status (using user <sid>adm)
if the listener is not up, start it using the appropriate service...
do you have any logs, like the startdb.log or any of the dev_w?, dev_disp etc.?
GreetZ, AH
Similar Messages
-
SAP Component , Data Base , add-ons
Dear all,
Please let me know the ways / function modules to find out the add-ons on the system, database being used on the system, sap component & version of the system. using function module.
requirement is to run a report and get all the below details displayed. clients, data base, add-ons, components, release on the current system to be displayed
Kindly let me know the ways to get this info.
Regards,
PurshothHi
Did you chaecked the similar thread.
ABAP data type for system information
Regards
Sachin -
RFC conn between SAP ERP and TREX not working
Hi experts,
we run a TREX instance on a Windows 2003 server and use it for our HCM portal.
The solution is in operation since 2 years but actually we face the problem that objects which have been created within the last month will not be covered by the index.
Without knowing about any changes in the setup I see the following error message when I perform the RFC connecten test in our ERP system:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program Trex_UKP_20071025104543 not registered
Error Details LOCATION: SAP-Gateway on host janos / sapgw00
Error Details DETAIL: TP Trex_UKP_20071025104543 not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 12906
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Jul 27 10:34:48 2009
Error Details VERSION: 2
In the TREX admin tool on the Windows server I see the following log message:
Source->Destination: Not set in TREX but TREX reachable -> ini file section missing?.
After reading lots of notes I guess that I have to register the server program that's used in the RFC on the gateway.
Unfortunately I have no idea how to do that.
Has anybody experiences with such a problem case or can tell me how to continue?
Is the problematic RFC realy the reason of my problem or just another side effect?
Many thanks for your really appreciated help in advance and best regards
GünterHi again,
the saprfc.ini on the TREX server look like follows:
DEST=UKT
TYPE=A
ASHOST=medos
SYSNR=00
DEST=UKP
TYPE=A
ASHOST=janos
SYSNR=00
UKT is our test system which is connected to the same TREX server and everything is fine there.
On the test system I can also see the registered server program in SMGW.
UKP is our productive system where the configuration should be the same.
Of course I do not see the registered server program in SMGW there.
Is the way described in above link (RFCACCEPT) the only correct way to register my server program?
I ask because I found information that the server program has to be developed according to this rfcaccept command and I have absolutely no idea wheather this is so.
Thanks again for your help!
Günter -
Hi All,
If SAP ECC is on SAP HANA Database then SLT is not need , then how to bring tables into HANA Studio for Modeling
Kindly reply ASAP.
Thanks in AdvanceHello Manikandan,
If ECC is maintained with Hana database,then we do not need SLT server.
Regards,
Suman -
Hi ,
i m not Mouting my database.while start up i m getting error like
ORA-01103: database name 'MLLNBSNL' in controlfile is not 'BSNLMLLN'
Kindly help me to resolving this error.Starting ORACLE instance (normal)
Wed Aug 11 11:34:32 2010
Running with 1 strand for Non-Enterprise Edition
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 3
Running with 1 strand for Non-Enterprise Edition
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /orasw/controlfile/bsnlmlln/control01.ctl, /orasw/controlfile/bsnlmlln/control02.ctl, /orasw/controlfile/bsnlmlln/control03.ctl
db_block_size = 8192
db_cache_size = 33554432
compatible = 9.2.0.0.0
log_archive_start = TRUE
log_archive_dest = /oraarch/oradata/bsnlmlln/archive
db_file_multiblock_read_count= 16
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
O7_DICTIONARY_ACCESSIBILITY= TRUE
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = bsnlmlln
dispatchers = (PROTOCOL=TCP) (SERVICE=bsnlmllnXDB)
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /opt/u01/app/oracle/admin/bsnlmlln/bdump
user_dump_dest = /opt/u01/app/oracle/admin/bsnlmlln/udump
core_dump_dest = /opt/u01/app/oracle/admin/bsnlmlln/cdump
sort_area_size = 524288
db_name = bsnlmlln
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Wed Aug 11 11:34:33 2010
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=12
ARC0: Archival started
ARC1 started with pid=13
ARC1: Archival started
Wed Aug 11 11:34:33 2010
ARCH: STARTING ARCH PROCESSES COMPLETE
Wed Aug 11 11:34:33 2010
ARC0: Thread not mounted
Wed Aug 11 11:34:33 2010
ARC1: Thread not mounted
Wed Aug 11 11:34:33 2010
Oracle Data Guard is not available in this edition of Oracle.
Wed Aug 11 11:34:33 2010
ALTER DATABASE MOUNT
Wed Aug 11 11:34:37 2010
ORA-1103 signalled during: ALTER DATABASE MOUNT...
Wed Aug 11 11:35:41 2010
Restarting dead background process QMN0
QMN0 started with pid=9
Wed Aug 11 11:40:57 2010
Restarting dead background process QMN0
QMN0 started with pid=9
Wed Aug 11 11:42:04 2010
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 3
All dispatchers and shared servers shutdown
Wed Aug 11 11:42:07 2010
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Wed Aug 11 11:42:07 2010
ARCH shutting down
Wed Aug 11 11:42:07 2010
ARCH shutting down
Wed Aug 11 11:42:07 2010
ARC0: Archival stopped
Wed Aug 11 11:42:07 2010
ARC1: Archival stopped
Wed Aug 11 11:42:11 2010
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Wed Aug 11 11:43:39 2010
Starting ORACLE instance (normal)
Wed Aug 11 11:43:39 2010
Running with 1 strand for Non-Enterprise Edition
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 3
Running with 1 strand for Non-Enterprise Edition
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /orasw/controlfile/bsnlmlln/control01.ctl, /orasw/controlfile/bsnlmlln/control02.ctl, /orasw/controlfile/bsnlmlln/control03.ctl
db_block_size = 8192
db_cache_size = 33554432
compatible = 9.2.0.0.0
log_archive_start = TRUE
log_archive_dest = /oraarch/oradata/bsnlmlln/archive
db_file_multiblock_read_count= 16
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
O7_DICTIONARY_ACCESSIBILITY= TRUE
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = bsnlmlln
dispatchers = (PROTOCOL=TCP) (SERVICE=bsnlmllnXDB)
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /opt/u01/app/oracle/admin/bsnlmlln/bdump
user_dump_dest = /opt/u01/app/oracle/admin/bsnlmlln/udump
core_dump_dest = /opt/u01/app/oracle/admin/bsnlmlln/cdump
sort_area_size = 524288
db_name = bsnlmlln
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Wed Aug 11 11:43:40 2010
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=12
ARC0: Archival started
ARC1 started with pid=13
Wed Aug 11 11:43:40 2010
ARCH: STARTING ARCH PROCESSES COMPLETE
Oracle Data Guard is not available in this edition of Oracle.
Wed Aug 11 11:43:40 2010
ARC1: Archival started
ARC1: Thread not mounted
Wed Aug 11 11:43:40 2010
ARC0: Thread not mounted
Wed Aug 11 11:43:40 2010
ALTER DATABASE MOUNT
Wed Aug 11 11:43:45 2010
ORA-1103 signalled during: ALTER DATABASE MOUNT... -
Save Button saves in data base not adding on form.In Detail form of M/D For
Hello Everyone,
Please help me on following.
I ahve mater detail form and in detail form i have only one field displaying and if i add new row it adds and if i put new data in subject name and save it .It saves in database but doesn't display in form.
I have
Table A with
CaseId PK (Master Table)
Table B
CaseID-FK &
Subject Id PK(Detail Table)
Edited by: user639035 on Mar 17, 2010 8:44 AMREPORT YH648_1111111.
TABLES SSCRFIELDS.
parameter : c AS CHECKBOX USER-COMMAND SUNIL
AT SELECTION-SCREEN .
SY-UCOMM = SSCRFIELDS-UCOMM.
START-OF-SELECTION.
CASE SY-UCOMM.
WHEN 'SUNIL'.
WRITE 'SUNIL KUMAR .BETHINEDI'.
WHEN ' '.
WRITE 'BLA BLA BLA '.
ENDCASE.
THIS IS THE WAY U CAN USE THE CHECK BOX.
INSTED OF THIS WRITE 'SUNIL KUMAR .BETHINEDI'.
U USE THE INSERT STATEMENT. -
Business Objects XI 3.0/3.1- Connection with SAP ERP not with BW
Hi all members,
I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP.
My client does not have SAP Business Warehouse. Neither they are interested to have SAP BW.
So, I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP ?
Any other thing i have to go for?
Kindly any member guide me in bit detail.
Thanks and Best Regards,
IzharHi,
currently it is not possible to build web intelligence reports fetching data directly from an SAP ERP system. The reason is that SAP ERP data sources are not supported in universes.
Regards,
Stratos
PS: An option is to deploy a BOBJ rapid mart. Please note that in this case you require the BOBJ Data services (ETL) tools. The idea behind the SAP ERP related rapid marts is that in the first step the data are extracted from your SAP ERP sources and load them into a relational database (using a predifined DWH scheme). Additionally the package provides you with universes (which rely on this predefined DWH scheme) and use the database as data sources, here your SAP ERP data were extracted to. -
Connection from Web Intelligence over Universe to SAP ERP without SAP BW
Hi there,
is there a way to create a Universe which ic connected to SAP ERP (ECC 6.0) ? I want to use Web-Intelligence to create the Reports for my ERP-Data. But i don't want to make the way over SAP BW.
Otherwise i have to use Crystal because Crystal + SAP ERP Integration Kit can handle a connection to ERP. But then i have to waste a lot of time for the accuracy to a pixel which i dont need and i dont want...
Any Ideas ?!
Thanks
Sebastian
Edited by: smenzl on Mar 31, 2010 9:17 AMHi
you have 4 options:
1) Load your SAP ERP data into an SAP BW system and use OLAP universes to build WebI reports.
2) Use Rapid marts for SAP. This product comprises Data Integrator mappings that will allow to load your SAP ERP data into a predefined DWH based on a relational data source (like DB2, MS SQL Server or Oracle). It also includes a universe based on the predefined relational DWH that will allow you to build WebI reports.
3) Use the Data Federator with the SAP R/3 connector. Please note that the R/3 connector is NOT a product rather a prototype tand will be used at own risk (SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken])
4) NOT RECOMMENDED: Try to access the tables directly in the underlying database. Please note that this may work for some but not all of the ERP data. In several case the data are stored encoded in the underlying tables and there is no way to extract the required information. Additionally the ERP security will not be leveraged into the WebI report.
Crystal reports is the currently the only BO reporting tool, which supports direct access to SAP ERP data sources.
Regards,
Stratos -
SAP ERP connection (SAP JCO)
Hello,
Specs: SAP BO 4.0 sp6
Information Design Tool version 14.0.6 (installed on client machine)
BO Application server: Microsoft Windows Server 2008
I'm receiving the following error message when trying to create a connection from BO (Information Design Tool) to ECC. I have selected the SAP Java Connector type of connection. The connection works as I have tested it. However in the data-foundation layer of the Information Design tool when I want to see the list of tables, it errors out. Please advice as to what does the error message indicate. thanks
Regards,
samiqueHi
SAP ERP data access via Universe –InfoSets –SAP queries –ABAP functions.
After creating the connection to the query, navigate to the “Show values” taband expand your Global tree and you will see your query available.
In data foundation will be based on this query and theconnection created in the IDT to access it. This represents the actual infoset/sap querystructures as from ECC..if you are not able to access.
Can you please check the servers are running or not....if possible can re-start and check able to access the data. -
Create universe based on SAP ERP (ECC 6.0)
Hi experts,
I have a short questions which is hopefully easy to answer.
Is it recommended, if I want to create a universe based on the SAP ERP System to directly connect to the underlying database or should I use the Data Federator to connect to a universe?
I have no data warehouse and I dont want to craete one. I`m using BO Edge BI 3.1 and ECC 6.0.
First I only want to build a universe with one data source (ERP). I know that if I want to join several sources I must use Data Federator or Data Integrator.
Can anyone help me with this question?
Thanks al lot and have a nice day
DanielHi,
As I said this is the only way to build universes on SAP ERP (ECC 6.0).
This application is currently a prototype but it is planned to deliver an official support of SAP ERP (ECC 6.0) by Data Federator in the coming weeks.
Data Federator will be used for both XI 3.1 and BI 4.x to access SAP ERP data: this access will be provided only for the XI 3.1 release, we also plan to support it in BI 4.1.
Regards
Didier -
Interface between Lotus Notes Data Base & SAP
Hi All,
Our client is having both Lotus Notes Database & SAP. Theirs some data is stored in the Lotus Notes Database. Now they want to transfer that data into SAP.
What we have suggested is to download the data from the Lotus Notes into excel sheets & from the excel sheets we can upload into SAP.
Plz tell is there any interfacing tool available between Lotus Notes Database & SAP or what we have suggested is right?
Reg,
NishantHello Nishant,
you may consider the SAP R/3 - Lotus Notes/Domino Integration options listed in
Re: SAP Workflow and Lotus Notes Integration
If this does not fit your requirements or if you need more information, please let me know.
Regards
Michael -
Acquiring sales data from SAP ERP
(While evaluating Lumira, after watching promoclips, reading papers and working with the free trial some questions are still unanswered. I kindly ask you for help… Supporting a clear structure, I decided to open a separate thread for each question.)
How’s about connecting Lumira to a SQL-based SAP Instance to analyze sales data? Does SAP provide a “Business Content” similar to SAP-BW or do I have to join all the affected tables manually?
How would the scenario above be if I connect Lumira to a HANA-bases SAP Instance?
Any help would be appreciated, thank you in advance!Hi,
there are a couple of similar threads already, which might give you suggestions:
Retrieve Data from ERP Infosets
SAP Lumira: Getting Familiar Freehand SQL Against SAP ERP - then to iPad
both those links discuss using 'freehand sql' drivers in Lumira to connect to ERP Infosets . (a kind of ECC query)
a similar approach, going via Business Objects BI 4, would be to have a Universe ontop of Infoset, and Lumira connects to BI4 to consume the Infoset Universe.
In both cases, the prerequisite is the definition of said 'infoset' - the creation of which would be handled by content creators within ECC environment, not likely the Lumira user.
Regards,
H -
Extracting Data from SAP ERP using BODI/Data Services 4.0
HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean -
SAP QUERY -logical data base ADA
I have created a SAP Query with logical data base ADA,I have selected four tables in it.Do i need to link these tables if yes..where and how?The report is for fields in asset master data.
.But i get below error when i try to genaret the output :
Fields from parallel tables within a line
Line: 01
Field: Asset description
(ANLT-TXT50, table ANLT)
Field: License plate no. of vehichle
(ANLZ-KFZKZ, table ANLZ)
i get such similar five messages but they are warning..when i execute with warning however i get the fields with description but not with Value.Ex:i get asset description and not Asset number as required.You don't have to link them, they ar linked that is the power of a logical data base
To get the text in your report you need the key fields
Like
(Lanque Key)
company code
asset number
Asset sub number
Go to info sets and look to the standard ones like /SAPQUERY/AM01 -
Gettin data from SAP R/3 4.7 unicode sys to SAP ERP non-unicode sys via RFC
We are trying to get data from SAP R/3 4.7 unicode sys to SAP ERP non-unicode sys via RFC. We are reading field from the database via FM and this field got converted by SAP standard Method (CL_ABAP_CONTAINER_UTILITIES=>fill_CONTAINER_C) from structure. When reading this field from ERP sys and converted back to structure using SAP standard Method the value is un-accurate, and different(blank) giving values.
How, if the data originally was a char or numeric it works fine, but not for decimal.
best regards,
Abu-QahtI have a range fields with different type of ranges, am saving these to the database by converting them to a string via the same method. I got the same problem so I tried to convert the string to xstring using function SCMS_STRING_TO_XSTRING, before send it to the other system, but the function raised an exception: CX_SY_CONVERSION_CODEPAGE
Maybe you are looking for
-
My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?
-
Unable to print wirelessly, printer status is offline???
Every time I try to print wirelessly I get a message stating my printer is offline?
-
How to map a context attribute to an input field
Hi, I am new to CRM 2007 UI.I have a table control view on my screen and records are filled in this table when an user enters a value in an input field and presses enter.My bsp page looks something like this. <%@page language="abap" %> <%@extension n
-
Anybody successfully using (g)zipped sockets?
Dear All, I tried to use custom sockets that uses either GZIP or zip streams (not forgetting get/putNextEntry for the latter). When the client does the lookup step, nothing happens, my client keeps silently waiting. If I stop the server at thiis poin
-
I need to find a way in which to extract the content from a web site that is located in an edible region which I've named "Body." It doesn't matter if the content is extracted as an HTML file, a text file, or another form. I just need to be able to e