SAP ERP, FICO and FICA diagram
Hello Experts,
I am looking for some kind of visual depiction or an architecture diagram for ERP component SAP FICA and/or SAP FICO.
Basically I want to know how these two components are connected/related to each other then how they are connected/related to SAP-ERP.
Any slide show or diagram would be of great help. Thanks.
Kind Regards,
Nikhil
Hi Nikhil,
Take a look to the SAP business map of the utilities industry, for example Waste and water Utilities:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/business_maps/6be866f998b04f869a7783381cfa7170/d83809bd950a46eba5395207f68331eb/038f6b910e694218a03916647ef49e3b/b7272fbea6d648c08d8858f56360bd8a/91dfc99232224ca7bbad3150fdd32e86.xml
Here you can find a representation of the solutions and business processes involved.
Best regards,
Cristobal.
Similar Messages
-
Differences between Product Version SAP ERP 2005 and SAP ECC 6.0
Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
JochenSAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy -
SAP ERP - CTS and Backup error CPIC-CALL: 'ThSAPCMRCV'
hello All,
I have some issues with transport system and when I try to schedule backup jobs in my ERP system. When I try to reconfigure my transport system the following message:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
Al ejecutar el reporte RSTPTEST se presenta:
Check Transport Tool 12.10.2011 16:32:11
DES System DES
tp Interface
Transport Profile
RFC Destination
tp Call
I executed the report RSTPTEST and the result was successful.
Another error is generated when I try to schdule the backup jobs in DB13:
Name and Server : cobogsap01 - cobogsap01
DBMRFC Function : DBM_GETF
Command : DBMMDF
Error : System Error
Error Message : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20
I checked the connection between SAP and DB and is OK. I found in some forums and SAP Notes that this error can be fixed with a kernel update, so I updated the SAP kernel, TP and R3trans files but the error continue.
I don't know what more I've to check, so I need your help to solve this issue.
Thanks
HEPChello Michael,
I could fix the transport system, was a network issue, but the DB13 error continue, now when I test the DB connection the following error is show by the PRD system.
Connect. test with "dbmcli db_state" Unsuccessful
I decided to close this message and open another in MaxDB forum.
Thanks
HEPC
Edited by: Hernando Polanía C on Oct 18, 2011 6:32 PM -
PI Integration between SAP ERP system and Cloud for Customer
Hi,
We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
Could anyone let us know what are we missing here, so that we can get the message types.
Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
Please let me know how to debug such a scenario.
Regards,
SangeetaHi Vatsav,
Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
Customer Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
Customer Address Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
Customer Contact Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
Regards,
Sangeeta -
ERP 2005 and SAP ERP 6.0 are same
Hi friends,
First of all why i have asked ERP 2005 and SAP ERP 6.0 are same or not because i am creating a new system under transaction solution_manager in the solman system for the installation of the EHP4 packs.
The problem here is when i create a new system for SAP ERP, the product version that is displayed is SAP ERP 2005, my system doesn't show SAP ERP 6.0, will that make much difference.
IsSAPERP 2005 and SAP ERP 6.0 are same.
thanks.
anurop> I am not getting the option SAP ERP 6.0 but i am getting only SAP ERP 2005 , is there any other way i can get SAP ERP 6.0 or can i leave it as it as SAP ERP 2005 and start downloading the EHP4 packs thorugh the Solution manager.
The given note contains a step-by-step configuration how to change that - including a PDF as attachment with screenshots.
You need at least SolMan SP17 to get EHP4.
Markus -
IWay adapters between SAP ERP and Oracle
Hi,
The systemlandscape in the future is a SAP ERP System without a java stack and a Oracle system.
Importend: And without a SAP Portal and a SAP PI.
I think we will install the iWay Oracle adapter on the SAP ERP system and on the Oracle the iWay for SAP adapter.
I this solution generally possible with iWay adapters or maybe others solution between SAP ERP and Oracle?
Thank you for all answers.
Regards
RichardHi,
Your question is not clear.
It is true that SAP is no more supporting Dual stack systems because of performance related problems. So, we need to install As ABAP and As Java system separately. As far as oracle is concerned, you need a database to install ERP system then why you want to install adapter ?
Thanks
Sunny -
Business Objects XI 3.0/3.1- Connection with SAP ERP not with BW
Hi all members,
I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP.
My client does not have SAP Business Warehouse. Neither they are interested to have SAP BW.
So, I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP ?
Any other thing i have to go for?
Kindly any member guide me in bit detail.
Thanks and Best Regards,
IzharHi,
currently it is not possible to build web intelligence reports fetching data directly from an SAP ERP system. The reason is that SAP ERP data sources are not supported in universes.
Regards,
Stratos
PS: An option is to deploy a BOBJ rapid mart. Please note that in this case you require the BOBJ Data services (ETL) tools. The idea behind the SAP ERP related rapid marts is that in the first step the data are extracted from your SAP ERP sources and load them into a relational database (using a predifined DWH scheme). Additionally the package provides you with universes (which rely on this predefined DWH scheme) and use the database as data sources, here your SAP ERP data were extracted to. -
Enhancement Package 5 for SAP ERP 6.0 - Webinar Series - Oct-Nov 2011
Webinar Series: Enhancement Packages for SAP ERP
Innovation Made easy!
SAP enhancement packages (EHPs) are optional add-on packages that enable you to selectively install and use new functions without a major release upgrade. Since May 2011 enhancement package 5 for SAP ERP 6.0 is general available. With this latest enhancement package more than 500 business functions are delivered in order to improve or enhance the various SAP ERP application areas, industry solutions and usability.
Customers running SAP ERP 6.0 can benefit by installing SAP enhancement package 5 and switch on any of the new business functions.
Get insights and an overview of whatu2019s new with SAP enhancement packages and how innovation is made easy. Join the upcoming webinar session series covering what you need to know about EHPs and activating new functions and the major improvements in SAP ERP Financials, SAP ERP HCM, SAP ERP Operations and the areas of usability and user interfaces.
In one-hour sessions SAP Experts will introduce the new functions; provide a u201Cliveu201D experience on selected topics and will be available to answer your questions.
Target group: These webinars are pointed to IT-managers, business managers, business analysts and business process experts.
Cost: Joining these webinar series is free of charge.
Language: English
Dates: Oct 13 to Nov 29, 2011
Region: Americas
Topics included
Enhancement Packages for SAP ERP: Innovation Made Easy - Learn how to do it
Enhancement Packages for SAP ERP: What is new in SAP ERP Operations?
Enhancement Packages for SAP ERP: What is new in SAP ERP HCM?
Enhancement Packages for SAP ERP: What is new in SAP ERP Financials?
Enhancement Packages for SAP ERP: What is new for User Interface and Usability?
To register please visit http://www.sap.com/mk/get/ehpHi Partson,
It is needed to connect this system with solution manager and create stack.xml using
maintanance optimizer. The main aim of this is to let you know what usage types/ functionalities are to be
selected from stack.xml.
It is also needed to download all the required support packs/ addons using maintanance optimizer.
If you have DVDs containing the same product that matches with stack.xml, you can provide them.
But the safest way is is to give all the tasks to solution manager , It will create , and download neccesary sps, addons to your
download basket.
Thanks and Regards
Purna -
Difference Between SAP ERP Financial & SAP Business One ERP?
Hi Everyone
I am very new in the world of SAP, I just want to know what is the difference between SAP ERP Financial and SAP Business One???
Thanks in advance
CheersHi Farooque,
Welcome to SDN.
<b>SAP ERP Financial</b>
SAP ERP Financial provides a complete financial management solution for a broad range of industries. It's the leading enterprise software solution for accounting, financial reporting, performance management, and corporate governance.
The software solution offers depth of functionality in accounting, reporting, analysis, financial supply chain, and treasury management. Robust financial and management reporting, plus internal controls and documentation of all financial processes and transactions, ensures the highest levels of business analysis and governance.
It provides industry-leading support for local market requirements, languages, and currencies. It also supports a broad range of industry-specific processes and is compatible with all SAP industry solutions. Its scalable and open architecture is built for multinational organizations and connects financial management with existing business systems.
<b>SAP Business One</b>
SAP Business One is is an integrated, affordable, business management solution built from the ground up to meet the immediate and long-term needs of small and midsize businesses (SMBs). From general ledger and banking activities to service, sales, and inventory operations, SAP Business One provides all of the functions you need to gain greater control over your company and succeed in todays competitive business environment all in one easy to use, customizable, and scalable solution.
SAP Business One Financial Accounting delivers tools and reports that enable you to manage all financial processes, including:
- Chart of accounts -- Allows you to define all accounts and their hierarchical relationships
- Journal entries -- Allows you to enter or find manual journal entries and automatically allocate each transaction to a project or profit center
- Transaction templates -- Enables you to save time and prevent mistakes when entering manual journal entries
- Recurrent journal transactions -- Lets you create your own set of recurrent transactions, including automatic frequency reminders
- Exchange rate differences -- Adjusts foreign currency accounts to the changes in your local currency
- Trial balance report -- Displays account balances and transactions, enabling you to view all your financial reports in any desired currency and in each detailing level
- Profit and loss report -- Displays income and expenses in the conventional way used by accountants
- Balance sheet -- Displays assets and liabilities in the conventional way used by accountants
- Comparative reports -- Allows all reports to be displayed in a comparative view between months, quarters, years, or any other period
- Budget -- Helps you define and track your budget in any currency and view a summarizing budget report, which compares the actual versus the planned figures
- Financial reports designer -- Gives you the power to create unlimited financial reporting templates
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
How to configure sap maxdb client to connect to SAP ERP system (SAP HR)
Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb clienti tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4008
POS(1) Unknown user name/password combination
For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani -
Difference in SAP R/3 Financials and MY SAP ERP Financials
Hi ALL,
Can any one tell me the difference in SAP R/3 Financial and MY SAP ERP Financial
Thank and Regards
KedarMy SAP ERP provides additional analytics such as financial analytics, workforce analytics and operations analytics. We get employee life cycle management and employee relationship management and there's a financial supply chain component.
The NetWeaver piece gives you portal capabilities and better integration capabilities for integrating applications with applications from other vendors.
Check out the solution overview in this link.
http://download.sap.com/download.epd?context=34A481C8164156DEF6E507D82889F9F5D8D8F5BC953285A76585EA32C01E3F8A402BF4874B54DC389CD1EB0DCC5C469451499E974252ABDD
Reg,
Arun -
Differences between Oracle and SAP ERP
Hi All
I have a Industrial project which is currently having oracle.
I would like to give them a presentation on SAP ERP and its modules.
Does any1 have a ppt which highlights the advantages of SAP over Oracle. and stating its major differences.
Please send it ASAP.
Thanks and RegardsHi.......
Check this link :
The key difference between SAP and Oracle
http://searchsap.techtarget.com/news/article/0,289142,sid21_gci1294788,00.html
http://www.itjungle.com/two/two032807-story03.html
http://searchmanufacturingerp.techtarget.com/news/article/0,289142,sid193_gci1325932,00.html
Hope this helps you...........
Regards,
Debjani.......... -
Is SSO possible for SAP ERP and xMII
Hi,
Is it possible to have Single Sign-On between SAP ERP and xMII.
The requirement is that the user wants to login to the SAP ERP and using the same credentials he/she should be able to use xMII (without prompting for login credentials again.)
If it is not possible why is it so, and if it is then how?
Thanks in advance.
- AnkitHi,
UME is User Management Engine. The UME provides the centralized user management for all Java applications and can be configured to work with user management data from multiple data sources. It is seamlessly integrated in the J2EE engine of the SAP NetWeaver Application Server for Java as its default user store and can be administered using the administration tools of the AS java.
You can configure multiple data source (DB, LDAP or ABAP) to UME for managing user data.
For more information on UME please, refer the below link as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/cc1940d4558f5ce10000000a155106/frameset.htm
Thanks
R.Murali -
What is the difference between mySAP2004 and SAP ERP 2004?
Hi,
Can anybody tell me what is the difference between mySAP2004 and SAP ERP 2004?
If someone has the document, then please mail me at [email protected]
With Regards
tiffnyHi Tiffny,
actually I don't see a difference as "mySAP2004" is not an official name for anything
There is "mySAP ERP 2004" which is the marketing name for a bunch of functionality provided by several different bits of software components.
Hth,
Michael -
IDES and other Clients in one SAP ERP 2005 System
Hello everybody,
within a project for my master thesis i have to set up an SAP ERP 2005 System. This system should contain at least three clients. One of them should be the IDES client. Another client should be set up with an existing template. The third client should represent a smal company or at least i should set up some example process from the company (there is no need to map the whole company in the system). These processes should be realized with the SAP standard processes and they should just show how to map easy processes to SAP ERP. Neither the second nor the third client need to run in a productive environment, everything is just for training and testing.
My main Questions are:
I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
Can I implement the second and third client in the same ERP System (where the IDES client is) or do i need different Systems for it? Even if there is no productive use for the clients we would like to have a Development and a Quality Landscape. Is this possible with the IDES client? Actually I have two fast machines for this purpose - one for quality and one for development.
I would be very grateful for any hints.
Thanks a lot.
Regards,
MartinHi,
You can use SAP IDES as Dev and Quailty.There is no diffrence in full sap or IDES .In IDES we have some pree configure Clients and full Ecc we have three client 000,001 and 066.
So you can use SAP IDES as DEV.
Your Question :I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
Ans : you install diffrent mechine.We do't use any content.Do reinstall
Thanks
Pankaj Kalsayan
Maybe you are looking for
-
How can I do a hard reset without losing app data?
I have international texting on my phone and it's having an issue sending images to my friends overseas. The words go through but no media. I have Verizon's More Everything plan and after two days trying to get this sorted on their end, they want me
-
Unable to Install and run iTunes
After downloading and installing iTunes from Apple.com, it does not work. The error message shows unable to read memory at some address. I had used the repair option when I tried to re install it also. Still the problem lies. How do I resolve the pro
-
Why not create an external camera for the first iPad ?
This will resolve the issue to upgrade IO6 and still available for everyone as supplemental device; this can be used for intrusion detection, or take care of the baby, for examples. Apple meet a problem, and can use it for the best of each other. I u
-
Motif L&F: support for color schemes?
I want to use the Motif L&F in my Java application, but I want the color scheme to be chosen as per the users installed Color theme(using the CDE Style Manager). Having a default bluish grey UI does not blend well with my 'Desert' or 'Delphinium' col
-
This is killing me why this doesn't work. This is populating a SELECT. I have the exact same setup in another application. The only major difference is this use mysql, the one that works uses SQL Server 2000. Table name and columns are different too,