SAP ERP Security Problems

Hello,
We are searching and investigating the security problems and needs in SAP Systems (the NetWeaver and R3).
We are looking for vulnerabilities from the network level up to the application and SAP-GUI level.
We would like to hear and learn from users on case studies and problems that occurred during implementing and running the SAP systems.
We would appreciate if you could contact us for further details.
Thank you.
<Contact information removed by forum moderator>
Message was edited by: Christian Wippermann

Dear Alon,
Thank you for your interest in SAP Security. You are very welcome to investigate product security and to share your results with SAP ([email protected]). But this is exactly the place where SAP users should report security problems they may find. They should not report to other companies! That is why I removed your contact information and closed this thread.
To make myself clear: Please report security problems directly to [email protected] My collegues there will support to solve the issues.
Best regards,
Christian

Similar Messages

Having problem with the SAP ERP on HANA trial

Well, I left my SAP ERP Foundation Extension powered by SAP HANA - Fully Activated Appliance Landscape Trial suspended for about a week. When I re-activated the instance, I could connect to the SAP clients but not log in.
I get the "Logon not possible (error in license check)" message.
I also logged into my AWS console to look at the system log.
The log ends with a number of entries like:
This is R3trans version 6.24 (relesae 741 - 10.10.13 - 20:13:08 ).
unicode enabled version
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
R3trans finished (0012).
Is there anyway to fix this? or do I just terminate and start over, again. (yes, this is the forth or fifth time I've had to rebuild).
Thanks,
Brian

Hi Brian,
there is a bug in the SAP Kernel which unfortunately invalidates the license after each reboot. We are already working on releasing a new version of the SAP ERP Foundation Extension Trial end of this week/early next week which will fix the error.
Alternatively you might fetch the new kernel from the Service Marketplace (if you have access). You would need SAP Kernel 7.41 PL47 for Linux x86_64. After launching the instance in CAL before it turns "green" in the CAL UI you would need to exchange the binaries after logon via ssh.
Quite complex to do, so the suggestion is to wait until end of this week/early next week until we are able to release a new version of the appliance incl. the fix.
Best Regards,
Hannes

Can be changed Maxium length of user ID on SAP ERP

Hi, experts.
Now, I work project of global single instance SAP ERP.
A few days ago, I have received request from my client how can change maxium ID length of SAP ERP.
As I know, maxium length of SAP ERP's user ID is fixed 12 and it can be seen 'BNAME' field of 'usr02' table using se11 transaction code.
But our client want that each person's full name is used SAP ERP's id. therefore I search for credentials this cases globally.
If anybody knows this case, please reply me.
Thanks and regards.

This snippet of text from the link is very important:
Caution
If you connect to other systems, you should be sure the security policies you define here, are in harmony with the other system. For example, if you define one password length here, but the users are restricted to shorter password lengths in the back-end system, it can lead to logon problems. If you use the user management of an ABAP system as the data source, these settings do not always apply.
I do not think you can exceed these 12 characters in an ABAP system.

Moving SAP ERP Servers to a different domain.

Hello Experts
I currently have 3 SAP ERP 6.0 servers (central installs) a solution manager 7.0 EHP1 and netweaver CE machine all located in one windows domain (currenlty windows 2003 domain controllers) all running Oracle databases. I have been asked to look into moving all of these severs into the main corporate domain (currently windows 2008 r2 domain controllers) with a view to streamlining the domain structure. All the SAP installs are domain installs and therefore the accounts would need migrating to the new domain, what I would like to know, is are there any other factors other than those listed below that I need to consider:-
Migrate SAP user and service account to new domain
Adjust Profile Parameters for SAP G:\usr\sap\<SID>\sys\profile
Change frontend gui's to reference new domain (SSO has reference to the sap service account from the users domain)
Review folder permissions to ensure security is maintained (the current dommain no users log on to this domain- the new domain everyone logs onto)
Is there anything specific for oracle that should be changed??
It would be usful to know if anyone has done this and any pitfuls to avoid.
Thanks you.
Liz

Hi,
If some of your SAP systems will stay in the previous domain, you may have problems with the saplogon tickets because, as http cookies, they are valid for a domain. So SSO between SAP systems in different domains may generate problems (which can be solved).
If you use BSP or web dynpro applications, and use URL rewrites or redirects ,the change of FQDN may also need some configuration changes.
Concerning Oracle, check your OPS$ users.
Regards,
Olivier

SAP ERP Installation Error

Hello All,
Not sure, whether this is the right forum to post the installation problems or not, but, would be very happy to take guidance about the right forum for these kind problems.
I am doing SAP ERP 2005 (based on SAP NW 7.0 SR1) on AIX 6.1 in HA mode, completed the ASCS, DB and SCS instances without any problems, however, when I am doing CI instance installation I am getting into this error in 'Create Java Users' (phase 15 of 27)
The following is the error from the sapinst.log
INFO 2010-03-09 16:09:44
Output of /usr/sap/FVT/DVEBMGS03/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/install/lib:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/install/sharedlib:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/install -c sysnr=03 -c ashost=powerhavios04 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message is written to the logfile /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/UserCheck.log.
WARNING 2010-03-09 16:09:44
Execution of the command "/usr/sap/FVT/DVEBMGS03/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/install/lib:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/install/sharedlib:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/install -c sysnr=03 -c ashost=powerhavios04 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code 253. Output:
Critical Error
Can't read program properties
-> Internal program error (rc = -1)
Usage : /usr/sap/FVT/DVEBMGS03/exe/jlaunch [-options] <arg0> <arg1> ... <argn>
Launch the specified java program
options : [-file=<property file>] (default=jlaunch.properties)
           [-nodename=<node name>] (default=jlaunch)
           [-app=<application name>] Standalone application
              -> <property file> = <application name>.properties
              -> <SAP profile>   = <application name>.pfl
           [pf=<SAP profile>] (default=jlaunch.pfl)
           [-parent=<pid of the parent process>] (default=0)
           [-tracefile=<filename>] (default=dev_jlaunch)
INFO 2010-03-09 16:09:44
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/dev_UserCheck.
I do see the similar message in UserCheck.log
Any idea about why this problem and possible resolutions?
Thank you in advance.
Srini

getting the following problem, while installing CI instance and failed at create java users.
Applied kernel patch SAPEXE_236-20000978.SAR, but problem is not solved.
INFO 2010-03-13 13:59:27
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/dev_UserCheck.
INFO 2010-03-13 13:59:27
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/CI/dev_UserCheck.clone.
ERROR 2010-03-13 13:59:27
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=powerhavios04 SYSNR=03 GWHOST=powerhavios04 GWSERV=sapgw03 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner '9.122.87.103:sapgw03' not reached
TIME        Sat Mar 13 13:59:26 201
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2513
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     2
ERROR 2010-03-13 13:59:27
FCO-00011 The step createJSF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind
|ind|3|0|createJSF was executed with status ERROR .
Also verified that port exists in the /etc/services.
Stared the AS, SCS instances and continued installation but still same problem.
Pls. let me know, if anyone knows solution.
Thanks in advance,
Aruna

Connection from Web Intelligence over Universe to SAP ERP without SAP BW

Hi there,
is there a way to create a Universe which ic connected to SAP ERP (ECC 6.0) ? I want to use Web-Intelligence to create the Reports for my ERP-Data. But i don't want to make the way over SAP BW.
Otherwise i have to use Crystal because Crystal + SAP ERP Integration Kit can handle a connection to ERP. But then i have to waste a lot of time for the accuracy to a pixel which i dont need and i dont want...
Any Ideas ?!
Thanks
Sebastian
Edited by: smenzl on Mar 31, 2010 9:17 AM

Hi
you have 4 options:
1) Load your SAP ERP data into an SAP BW system and use OLAP universes to build WebI reports.
2) Use Rapid marts for SAP. This product comprises Data Integrator mappings that will allow to load your SAP ERP data into a predefined DWH based on a relational data source (like DB2, MS SQL Server or Oracle). It also includes a universe based on the predefined relational DWH that will allow you to build WebI reports.
3) Use the Data Federator with the SAP R/3 connector. Please note that the R/3 connector is NOT a product rather a prototype tand will be used at own risk (SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken])
4) NOT RECOMMENDED: Try to access the tables directly in the underlying database. Please note that this may work for some but not all of the ERP data. In several case the data are stored encoded in the underlying tables and there is no way to extract the required information. Additionally the ERP security will not be leveraged into the WebI report.
Crystal reports is the currently the only BO reporting tool, which supports direct access to SAP ERP data sources.
Regards,
Stratos

IDES Installation - EHP 7 for SAP ERP 6.0, fails at abap import win 2012 r2 ORA

Dear gurus:
I am having an issue on import abap phase to complete the SAP IDES ERP EHP 7 for ABAP installation.
    i am already search on the net, but found nothing about this>
my host file on both path:
C:\Windows\System32\drivers\etc
C:\Windows\SysWOW64\drivers\etc
#127.0.0.1
rzablah01
127.0.0.1
rzablah01.rzablah
#127.0.0.1
rzablah01
localhost
i don't have domain controller
machine:
windows 2012 server datacenter r2 english x64
8gb ram
700gb hdd
the SWPM is
SWPM10SP06_5-20009707.sar
the pre check was OK
I put the policy files on java in the following paths
C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\sapjvm\sapjvm_6\jre\lib\security
C:\usr\sap\ERP\SYS\exe\jvm\NTAMD64\sapjvm_6.1.059\sapjvm_6\jre\lib\security
the version is jce_policy-6.zip
I already patch kernel, and try another things, but nothing solve it.
my log:
C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\sapinst_dev.log
i found this on the file:
WARNING    2014-09-24 21:10:39.657 [synxcpath.cpp:1010]
          CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Unable to get information about path \\LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
sapinst_dev.log________________________________:
TRACE      2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE      2014-09-24 21:10:33.238
Using custom value flow_trace for property SAPINST_MESSAGE_DEVLOG_THRESHOLD.
TRACE      2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_GUILOG_THRESHOLD.
TRACE      2014-09-24 21:09:42.872 [iaxxclib.cpp:174]
          CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\\sylib722.dll
TRACE      2014-09-24 21:09:42.873
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE      2014-09-24 21:09:43.017
MessageLib initialized successfully.
INFO      2014-09-24 21:09:43.20 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_09_43.
INFO      2014-09-24 21:09:43.21 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_09_43.
TRACE      2014-09-24 21:09:43.22 [syxxclogbook.cpp:219]
          PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
          lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel
TRACE      2014-09-24 21:09:43.23 [csicomponentsetmanager.cpp:112]
          CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib.
TRACE      2014-09-24 21:09:43.595 [csicomponentsetmanager.cpp:146]
          CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib done.
TRACE      2014-09-24 21:09:43.597 [iaxxclib.cpp:174]
          CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaguieng722.dll
TRACE      2014-09-24 21:09:43.598 [syxxclogbook.cpp:219]
          PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
          lib=syslib module=syslib
Initialized SAP kernel tracing to file dev_sap_kernel
TRACE      2014-09-24 21:09:48.153 [synxcuser.cpp:2083]
          CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user Administrator returned true.
TRACE      2014-09-24 21:09:48.153 [syxxccache.cpp:419]
          CSyAccountCache::addToCache(const IaPtr<CSyAccountImpl> account)
          lib=syslib module=syslib
inserted account (Administrator, S-1-5-21-3086296020-3121675482-1484945983-500, USER) into the accountcache.
TRACE      2014-09-24 21:09:48.153 [cguiproxy.cpp:74]
          CGuiProxy::doLog()
Waiting for client connection (1)
TRACE      2014-09-24 21:09:48.154 [synxccuren.cpp:901]
          CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre')
          lib=syslib module=syslib
Environment variable SAPINST_JRE_HOME set to value 'C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre'.
TRACE      2014-09-24 21:10:12.858 [cguiproxy.cpp:74]
          CGuiProxy::doLog()
Start client logon ...
TRACE      2014-09-24 21:10:12.858 [cguiproxy.cpp:398]
          CGuiProxy::checkIfLogon
Connection request to guiengine backend by host child process at (736:740)
TRACE      2014-09-24 21:10:12.859 [cguiproxy.cpp:455]
          CGuiProxy::checkIfLogon
GUI Protocol version is 3.1
TRACE      2014-09-24 21:10:12.859 [cguiproxy.cpp:456]
          CGuiProxy::checkIfLogon
Send connect information
TRACE      2014-09-24 21:10:12.859 [cguilogon.cpp:246]
          CGuiLogon::testForAutoLogon()
client connected from child process at (736:740)
TRACE      2014-09-24 21:10:13.46 [cguiproxy.cpp:74]
          CGuiProxy::doLog()
Client successfully logged on from child process at (736:740)
INFO      2014-09-24 21:10:13.177 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_10_13.
INFO      2014-09-24 21:10:13.178 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_10_13.
TRACE      2014-09-24 21:10:13.179 [csimanagerinterfaces.cpp:3798]
          CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE      2014-09-24 21:10:13.349 [csimanagerinterfaces.cpp:3800]
          CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE      2014-09-24 21:10:13.361 [csimanagerinterfaces.cpp:3798]
          CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE      2014-09-24 21:10:13.535 [csimanagerinterfaces.cpp:3800]
          CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE      2014-09-24 21:10:13.535
exe dir is C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362
INFO      2014-09-24 21:10:13.538 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO      2014-09-24 21:10:13.539 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE      2014-09-24 21:10:13.543 [iaxxclib.cpp:174]
          CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iakdblib722.dll
TRACE      2014-09-24 21:10:13.543 [sixxcreate.cpp:46]
          startInstallationViaStarter()
SAPinst build information:
Version:      2014.09.0
Build:        1521363
Compile time: Sep 15 2014 - 16:33:56
Make type:    optU
Codeline:      720-2_REL
Platform:      NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE      2014-09-24 21:10:13.547 [csimanagerinterfaces.cpp:3798]
          CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE      2014-09-24 21:10:13.728 [csimanagerinterfaces.cpp:3800]
          CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE      2014-09-24 21:10:14.109 [cproductchoicedialog.cpp:79]
          CProductChoiceDialog::popUp
Reading product catalog...
TRACE      2014-09-24 21:10:15.410 [cproductchoicedialog.cpp:84]
          CProductChoiceDialog::popUp
Reading product catalog done.
TRACE      2014-09-24 21:10:15.562 [cstartupfilereader.cpp:482]
          CStartupFileReader::filterCatalogByConstraints()
Displaying unfiltered product catalog
TRACE      2014-09-24 21:10:15.969 [iaxxgenimp.cpp:411]
          CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE      2014-09-24 21:10:15.999 [iaxxgenimp.cpp:431]
          CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation</title>
<dialog/>
TRACE      2014-09-24 21:10:16.262 [iaxxgenimp.cpp:1031]
          CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2014-09-24 21:10:29.73 [iaxxdlghnd.cpp:96]
          CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2014-09-24 21:10:29.73 [iaxxcdialogdoc.cpp:190]
          CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO      2014-09-24 21:10:29.157 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\x.
INFO      2014-09-24 21:10:29.158 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\x.
TRACE      2014-09-24 21:10:29.792 [cservicehelpers.cpp:318]
          CServiceHelpers::assertCorrectFileProtection(C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP)
Permission check skipped when running on windows.
TRACE      2014-09-24 21:10:29.793 [iaxxgenimp.cpp:411]
          CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE      2014-09-24 21:10:29.793 [iaxxgenimp.cpp:431]
          CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE      2014-09-24 21:10:29.793 [iaxxgenimp.cpp:1031]
          CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2014-09-24 21:10:32.063
current working directory is C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO      2014-09-24 21:10:32.69 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO      2014-09-24 21:10:32.70 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE      2014-09-24 21:10:32.73 [syxxcfile.cpp:125]
          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
          lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
TRACE      2014-09-24 21:10:32.73 [synxcfile.cpp:478]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copying file C:/Users/Administrator/AppData/Local/Temp/sapinst_exe.2796.1411607362/dev_sap_kernel to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO      2014-09-24 21:10:32.74 [synxcfile.cpp:678]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copied file 'C:/Users/Administrator/AppData/Local/Temp/sapinst_exe.2796.1411607362/dev_sap_kernel' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP'.
INFO      2014-09-24 21:10:32.75 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel.
TRACE      2014-09-24 21:10:32.75 [syxxcfile.cpp:125]
          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
          lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
TRACE      2014-09-24 21:10:32.76 [synxcfile.cpp:478]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copying file G:/SOFT/COM/INST/dev_sap_kernel to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO      2014-09-24 21:10:32.76 [synxcfile.cpp:678]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copied file 'G:/SOFT/COM/INST/dev_sap_kernel' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP'.
INFO      2014-09-24 21:10:32.116 [synxcfile.cpp:376]
          CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
          lib=syslib module=syslib
Removed file G:\SOFT\COM\INST\dev_sap_kernel.
TRACE      2014-09-24 21:10:32.117 [syxxclogbook.cpp:219]
          PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
          lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\dev_sap_kernel
TRACE      2014-09-24 21:10:32.118
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE      2014-09-24 21:10:32.118
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE      2014-09-24 21:10:33.039
Running with toplevel file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/toplevel.xml
TRACE      2014-09-24 21:10:33.050
Component version information: lmts_007_REL (CL 136598)
TRACE      2014-09-24 21:10:33.71 [syxxcfile.cpp:85]
          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
          lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE      2014-09-24 21:10:33.71 [syxxcnode.cpp:425]
          CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log, ISyNode::CopyMoveMode_t 0x3)
          lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.log to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log
TRACE      2014-09-24 21:10:33.88 [syxxcfile.cpp:85]
          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
          lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE      2014-09-24 21:10:33.88 [syxxcnode.cpp:425]
          CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log, ISyNode::CopyMoveMode_t 0x3)
          lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.log to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log
TRACE      2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE      2014-09-24 21:10:33.238
Using custom value flow_trace for property SAPINST_MESSAGE_DEVLOG_THRESHOLD.
TRACE      2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_GUILOG_THRESHOLD.
TRACE      2014-09-24 21:10:33.247
Running with keydb file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml
TRACE      2014-09-24 21:10:33.247
Running with dialog file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dialog.xml
TRACE      2014-09-24 21:10:33.370 [iaxxgenimp.cpp:694]
          CGuiEngineImp::parseDialogXml()
Removing 'copyLocation' node from diCdServerMissingPackage
Removing 'copyLocation' node from diCdServerMissingPackageWithCdName
Removing 'copyLocation' node from diCdServerWithCdName
TRACE      2014-09-24 21:10:33.392 [syxxcfile.cpp:85]
          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
          lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE      2014-09-24 21:10:33.393 [synxcfile.cpp:478]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml
INFO      2014-09-24 21:10:33.396 [synxcfile.cpp:678]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml'.
TRACE      2014-09-24 21:10:33.867 [syxxcfile.cpp:85]
          CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
          lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE      2014-09-24 21:10:33.867 [synxcfile.cpp:478]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.xml to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml
INFO      2014-09-24 21:10:33.876 [synxcfile.cpp:678]
          CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
          lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml'.
TRACE      2014-09-24 21:10:35.715 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2014-09-24 21:10:35.824 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\statistic.xml
TRACE      2014-09-24 21:10:35.911 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2014-09-24 21:10:37.967 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2014-09-24 21:10:38.82 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\statistic.xml
TRACE      2014-09-24 21:10:38.173 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2014-09-24 21:10:39.560
Setting product specific properties:
SAPINST_USE_FWK_JSLIB=true
TRACE      2014-09-24 21:10:39.561
Using framework jslib.
TRACE      2014-09-24 21:10:39.572
SAPinst was started using commandline: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\sapinst.exe
TRACE      2014-09-24 21:10:39.572
SAPinst properties are :
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
COMPUTERNAME=RZABLAH01
ComSpec=C:\Windows\system32\cmd.exe
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
FP_NO_HOST_CHECK=NO
GUISERVER_DIALOG_PORT=
GUISERVER_HTTP_PORT=
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)
JCE_POLICY_ZIP=
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\RZABLAH01
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PLMVIS_82_LIBPATH=C:\Program Files (x86)\SAP\FrontEnd\SAPgui\Program
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
Path=C:\oracle\ECC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)\bin
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
SAPINST_AUTHENTICATION_UNLIMITED=0
SAPINST_CHECK_PACKAGES=false
SAPINST_CODE_GENERATION_USE_RECURSIONS=0
SAPINST_CONTINUE_AFTER_ERROR=
SAPINST_CONTROL_URL=control.xml
SAPINST_CWD=
SAPINST_DETAIL_SUMMARY=true
SAPINST_DIALOG_PIPES=
SAPINST_DIALOG_PORT=21212
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_EXECUTE_PRODUCT_ID=
SAPINST_EXEDIR_CD=G:/SOFT/COM/INST
SAPINST_EXE_DIR=C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
SAPINST_GENERATE_INIFILE=0
SAPINST_GENERATE_INIFILE_CONFIG_FILE=
SAPINST_GLOBAL_PARAMETER_TABLE=
SAPINST_GUI_ACCESSIBLE=0
SAPINST_HTTP_PORT=4239
SAPINST_INIFILE_MODE=
SAPINST_INIFILE_PARAMETER_MODE=
SAPINST_INPUT_PARAMETERS_URL=
SAPINST_INSTANCE_ID_GENERATION=
SAPINST_JAVA_CODE_GENERATION=
SAPINST_JAVA_COMPONENT_GEN_DIRECTORY=
SAPINST_JAVA_COMPONENT_GEN_LOG_FILENAME=
SAPINST_JAVA_COMPONENT_SNIPPET_DIRECTORY=
SAPINST_JAVA_COMPONENT_SNIPPET_NAME=
SAPINST_JAVA_EXT_DIR_DIRECTORY=
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,NWProfiles,ClusterMgt,SystemIdentity,NetworkMgt
SAPINST_JS_DEBUG=
SAPINST_JVM_PROPERTIES=
SAPINST_KEYDB_URL=keydb.xml
SAPINST_LABEL_IDX_URL=
SAPINST_LOG_GUI_UPDATE=0
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_DEVLOG_THRESHOLD=flow_trace
SAPINST_MESSAGE_GUILOG_THRESHOLD=info
SAPINST_MESSAGE_HEADER=
SAPINST_MESSAGE_URL=.
SAPINST_MSLIB_TRACE=1
SAPINST_NO_GUISTART=0
SAPINST_NO_STEPBACK=0
SAPINST_OUTPUT_DIR=C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
SAPINST_PACKAGES_URL=packages.xml
SAPINST_PARAMETER_CONTAINER_URL=
SAPINST_PORT_AUTO=0
SAPINST_PROPERTIES_4_JAVA_STEPS_JVM=
SAPINST_REMOTE_ACCESS_USER=
SAPINST_REMOTE_ACCESS_USER_IS_TRUSTED=0
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_RFCLIB_TRACE=0
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SDT_CURDIR_MODE=
SAPINST_SDT_PASSWORD=**********
SAPINST_SDT_USER=
SAPINST_SEND_ANALYTICS=true
SAPINST_SET_STEPSTATE=0
SAPINST_SKIP_DIALOGS=false
SAPINST_SKIP_ERRORSTEP=0
SAPINST_SKIP_SOLMAN_CHECK=0
SAPINST_SKIP_SUCCESSFULLY_FINISHED_DIALOG=0
SAPINST_SKIP_SUMMARY_DIALOG=0
SAPINST_SLIDE_SHOW_URL=slideshow.xml
SAPINST_SLP_CHANNEL_NAME=
SAPINST_SMART_COMPONENT=
SAPINST_STACK_XML=
SAPINST_START_GUI=1
SAPINST_START_GUISERVER=1
SAPINST_STEP_EXECUTION_MODE=
SAPINST_STOP_AFTER_DIALOG_PHASE=0
SAPINST_SUCCESS_ID=
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=1
SAPINST_USE_DETAILED_LOG_DIRECTORY=0
SAPINST_USE_DEV_FEATURES=
SAPINST_USE_FWK_JSLIB=true
SAPINST_USE_HOSTNAME=
SAPINST_USE_MID=0
SAPINST_USE_OSBITS=
SAPINST_USE_OSFAName=
SAPINST_WRITE_GUIENGINE_BACKEND_TRACE=
SAP_DIR_PERF=C:\usr\sap\PRFCLOG
SELFEXTRACTOR_EXECUTABLE_NAME=G:/SOFT/COM/INST/sapinst.exe
SESSIONNAME=Console
SYSLIB_LOCKING_MODEL=
SecSpecialMode=710916
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp
TMP=C:\Users\ADMINI~1\AppData\Local\Temp
USERDOMAIN=RZABLAH01
USERDOMAIN_ROAMINGPROFILE=RZABLAH01
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
jce_policy_zip=
windir=C:\Windows
TRACE      2014-09-24 21:10:39.595 [iaxxclib.cpp:174]
          CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaejs722.dll
TRACE      2014-09-24 21:10:39.631 [iaxxclib.cpp:174]
          CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iacdlib722.dll
TRACE      2014-09-24 21:10:39.635 [ccdmanagerpackagexml.cpp:128]
          CCdManagerPackageXml::readLabelDefinitionFile()
Add packages from packages.xml; packageName:SAPINST, label: IND:SLTOOLSET:1.0:SWPM:*:WINDOWS_X86_64:*, media name:Software Provisioning Manager
Add packages from packages.xml; packageName:KERNEL, label: SAP:AKK:741:KERNEL:*:WINDOWS_X86_64:*, media name:Kernel NW740 SR1
Add packages from packages.xml; packageName:UKERNEL, label: SAP:AKK:741:UKERNEL:*:WINDOWS_X86_64:*, media name:UC Kernel NW740 SR1
Add packages from packages.xml; packageName:GATEWAY, label: SAP:AKK:741:KERNEL:*:WINDOWS_X86_64:*, media name:Kernel NW740 SR1
Add packages from packages.xml; packageName:CA, label: SAP:CA:741:UKERNEL:*:WINDOWS_X86_64:, media name:UC Kernel NW740 SR1 (folder CA)
Add packages from packages.xml; packageName:SMD, label: SAP:SMD:741:UKERNEL:*:WINDOWS_X86_64:, media name:UC Kernel NW740 SR1 (folder SMD)
Add packages from packages.xml; packageName:SCS, label: SAP:AKK:741:UKERNEL:*:WINDOWS_X86_64:*, media name:UC Kernel NW740 SR1
Add packages from packages.xml; packageName:SAPLUP, label: SAP:SAPLUP:741:*:*:*, media name:SL Controller (Kernel DVD)
Add packages from packages.xml; packageName:SCA_2, label: SAP:UT_ERP:SR1BS7I2013EHP7:*:*:*, media name:Java Component BS7i2013 SR1 on NW740 SR1
Add packages from packages.xml; packageName:J2EE, label: SAP:J2EE-CD:SR1740:J2EE-CD:j2ee-cd:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP)
Add packages from packages.xml; packageName:J2EE-ENG, label: SAP:J2EE-INST:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_J2EE_INST)
Add packages from packages.xml; packageName:J2EE-INST, label: SAP:J2EE-INST:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_J2EE_INST)
Add packages from packages.xml; packageName:SCA, label: SAP:UT:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_UT)
Add packages from packages.xml; packageName:CTC, label: SAP:CTC:NW04S:*:*:*, media name:Java Component NW740 SR1
Add packages from packages.xml; packageName:JAVA_EXPORT, label: SAP:JEXPORT:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_EXPORT)
Add packages from packages.xml; packageName:JDMP, label: SAP:JDMP:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_EXPORT_JDMP)
Add packages from packages.xml; packageName:JDMP_01, label: SAP:BPM_JDMP:SR1740:*:*:*, media name:Java Export SR1 (Vol.01)
Add packages from packages.xml; packageName:JDMP_02, label: SAP:JDMP_02:SR1740:*:*:*, media name:Java Export SR1 (Vol.02)
Add packages from packages.xml; packageName:JDMP_03, label: SAP:JDMP_03:SR1740:*:*:*, media name:Java Export SR1 (Vol.03)
Add packages from packages.xml; packageName:JDMP_04, label: SAP:JDMP_04:SR1740:*:*:*, media name:Java Export SR1 (Vol.04)
Add packages from packages.xml; packageName:JDMP_05, label: SAP:JDMP_05:SR1740:*:*:*, media name:Java Export SR1 (Vol.05)
Add packages from packages.xml; packageName:JDMP_06, label: SAP:JDMP_06:SR1740:*:*:*, media name:Java Export SR1 (Vol.06)
Add packages from packages.xml; packageName:JDMP_07, label: SAP:JDMP_07:SR1740:*:*:*, media name:Java Export SR1 (Vol.07)
Add packages from packages.xml; packageName:JDMP_08, label: SAP:JDMP_08:SR1740:*:*:*, media name:Java Export SR1 (Vol.08)
Add packages from packages.xml; packageName:JDMP_09, label: SAP:JDMP_09:SR1740:*:*:*, media name:Java Export SR1 (Vol.09)
Add packages from packages.xml; packageName:JDMP_10, label: SAP:JDMP_10:SR1740:*:*:*, media name:Java Export SR1 (Vol.10)
Add packages from packages.xml; packageName:EXPORT1, label: SAP:ECC:SR1617:EXPORT(1/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT2, label: SAP:ECC:SR1617:EXPORT(2/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT3, label: SAP:ECC:SR1617:EXPORT(3/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT4, label: SAP:ECC:SR1617:EXPORT(4/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT5, label: SAP:ECC:SR1617:EXPORT(5/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT6, label: SAP:ECC:SR1617:EXPORT(6/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT7, label: SAP:ECC:SR1617:EXPORT(7/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT8, label: SAP:ECC:SR1617:EXPORT(8/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT9, label: SAP:ECC:SR1617:EXPORT(9/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT10, label: SAP:ECC:SR1617:EXPORT(10/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT11, label: SAP:ECC:SR1617:EXPORT(11/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:MIGJDMP, label: SAP:MIGJDMP:73:*:*:*, media name:Migration Export (MIGJDMP)
Add packages from packages.xml; packageName:MIGAPPS, label: SAP:MIGAPPS:73:MIGRATION:*:*, media name:Migration Export (MIGAPPS)
Add packages from packages.xml; packageName:JMIG, label: SAP:JMIG:73:*:*:*, media name:Migration Export (JMIG)
Add packages from packages.xml; packageName:MIGEXPORT1, label: SAP:MIG:*:EXPORT(1/:*:*, media name:Migration Export (MIGEXPORT)
Add packages from packages.xml; packageName:RDBMS-ADA, label: MAXDB:*:RDBMS:MAX DB:WINDOWS_X86_64:*, media name:RDBMS MaxDB
Add packages from packages.xml; packageName:RDBMS-DB6, label: DB2/LUW:*:RDBMS:DB2/LUW:WINDOWS_X86_64:*, media name:RDBMS IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB6-CLIENT, label: DB2/LUW:*:CLI/JDBC-DRIVER:DB2/LUW:*, media name:CLI/JDBC-Driver IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB2-CLIENT, label: SAP:RDBMS-Client:10.1:DB2CONNECT:DB2 Connect for zSeries:*, media name:RDBMS Client IBM DB2 10 for z/OS
Add packages from packages.xml; packageName:TSAMP-DB6, label: IBM/TSA:*:DVD_TSAMP:*:*, media name:IBM Tivoli Systems Automation for Multiplatforms
Add packages from packages.xml; packageName:RDBMS-ORA, label: ORACLE:10.0G:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle
Add packages from packages.xml; packageName:RDBMS-ORA2, label: ORACLE:10.0G:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 2
Add packages from packages.xml; packageName:RDBMS-ORA112, label: ORACLE:11.2:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112
Add packages from packages.xml; packageName:RDBMS-ORA1122, label: ORACLE:11.2:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112 2
Add packages from packages.xml; packageName:ORACLI, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:ORACLI112, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:RDBMS-MSS, label: MSSQL:*:*:RDBMS:*:*, media name:RDBMS MS SQL Server
Add packages from packages.xml; packageName:RDBMS-SYB, label: SYBASE:*:RDBMS:*:WINDOWS_X86_64:*, media name:SAP ASE
Add packages from packages.xml; packageName:SRS-SYB, label: SYBASE:*:SRS:*:WINDOWS_X86_64:*, media name:SAP Replication Server
Add packages from packages.xml; packageName:RDBMS-HDB, label: HDB_SERVER:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Server
Add packages from packages.xml; packageName:RDBMS-HDB-CLIENT, label: HDB_CLIENT:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Client
Add packages from packages.xml; packageName:RDBMS-ADA, label: MAXDB:*:RDBMS:MAX DB:WINDOWS_X86_64:*, media name:RDBMS MaxDB
Add packages from packages.xml; packageName:RDBMS-DB6, label: DB2/LUW:*:RDBMS:DB2/LUW:WINDOWS_X86_64:*, media name:RDBMS IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB6-CLIENT, label: DB2/LUW:*:CLI/JDBC-DRIVER:DB2/LUW:*, media name:CLI/JDBC-Driver IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB2-CLIENT, label: SAP:RDBMS-Client:10.1:DB2CONNECT:DB2 Connect for zSeries:*, media name:RDBMS Client IBM DB2 10 for z/OS
Add packages from packages.xml; packageName:TSAMP-DB6, label: IBM/TSA:*:DVD_TSAMP:*:*, media name:IBM Tivoli Systems Automation for Multiplatforms
Add packages from packages.xml; packageName:RDBMS-ORA, label: ORACLE:10.0G:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle
Add packages from packages.xml; packageName:RDBMS-ORA2, label: ORACLE:10.0G:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 2
Add packages from packages.xml; packageName:RDBMS-ORA112, label: ORACLE:11.2:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112
Add packages from packages.xml; packageName:RDBMS-ORA1122, label: ORACLE:11.2:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112 2
Add packages from packages.xml; packageName:RDBMS-ORA121, label: ORACLE:12.1:RDBMS:*:WINDOWS_X86_64:*, media name:Oracle RDBMS 121
Add packages from packages.xml; packageName:RDBMS-ORA1212, label: ORACLE:12.1:RDBMS(2/:*:WINDOWS_X86_64:*, media name:Oracle RDBMS 121 2
Add packages from packages.xml; packageName:ORACLI, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:ORACLI112, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:RDBMS-MSS, label: MSSQL:*:*:RDBMS:*:*, media name:RDBMS MS SQL Server
Add packages from packages.xml; packageName:RDBMS-SYB, label: SYBASE:*:RDBMS:*:WINDOWS_X86_64:*, media name:SAP ASE
Add packages from packages.xml; packageName:SRS-SYB, label: SYBASE:*:SRS:*:WINDOWS_X86_64:*, media name:SAP Replication Server
Add packages from packages.xml; packageName:RDBMS-HDB, label: HDB_SERVER:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Server
Add packages from packages.xml; packageName:RDBMS-HDB-CLIENT, label: HDB_CLIENT:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Client
Add packages from packages.xml; packageName:LIVECACHE, label: LIVECACHE:LCA10:LC79:WINDOWS_X86_64:*, media name:liveCache 7.9
Add packages from packages.xml; packageName:SAP_CS, label: SAP:SAP_CS:*:*:PPMS component SAP_CS:PPMS-LABEL, media name:Content Server 6.40/6.50
TRACE      2014-09-24 21:10:39.644 [ccdmanagerimpl.cpp:312]
          CCdManagerImpl::goToRootDirAndScanForPackages()
Searching for packages. Found: IND:SLTOOLSET:1.0:SWPM:*:WINDOWS_X86_64:* in G:/SOFT/COM/INST
Searching for packages - not a valid path or not accessible: G:/SOFT/COM\/LABEL.ASC
Searching for packages. Nothing found in G:/SOFT/COM\
Searching for packages - not a valid path or not accessible: G:/SOFT\/LABEL.ASC
Searching for packages. Nothing found in G:/SOFT\
Searching for packages - not a valid path or not accessible: G://LABEL.ASC
Searching for packages. Nothing found in G:/
TRACE      2014-09-24 21:10:39.656 [iaxxclib.cpp:174]
          CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaccdlib.dll
TRACE      2014-09-24 21:10:39.656 [ccdmanagerimpl.cpp:872]
          CCdManagerImpl::lookForPackages()
WARNING    2014-09-24 21:10:39.657 [synxcpath.cpp:1010]
          CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Unable to get information about path \\LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
TRACE      2014-09-24 21:10:39.658 [ccdmanagerimpl.cpp:872]
          CCdManagerImpl::lookForPackages()
TRACE      2014-09-24 21:10:39.839
SAPinst build information:
Version:      2014.09.0
Build:        1521363
Compile time: Sep 15 2014 - 16:33:56
Make type:    optU
Codeline:      720-2_REL
Platform:      NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE      2014-09-24 21:10:39.849 [syxxsyshlp.cpp:151]
          syslib::logSystemState() lib=syslib module=syslib
Process environment
===================
Environment Variables
=====================
=C:=C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP
=G:=G:\SOFT\COM\INST
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
COMPUTERNAME=RZABLAH01
ComSpec=C:\Windows\system32\cmd.exe
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\RZABLAH01
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PLMVIS_82_LIBPATH=C:\Program Files (x86)\SAP\FrontEnd\SAPgui\Program
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
Path=C:\oracle\ECC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)\bin
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
SAPINST_EXEDIR_CD=G:/SOFT/COM/INST
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre
SAP_DIR_PERF=C:\usr\sap\PRFCLOG
SELFEXTRACTOR_EXECUTABLE_NAME=G:/SOFT/COM/INST/sapinst.exe
SESSIONNAME=Console
SecSpecialMode=710916
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp
TMP=C:\Users\ADMINI~1\AppData\Local\Temp
USERDOMAIN=RZABLAH01
USERDOMAIN_ROAMINGPROFILE=RZABLAH01
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
User: RZABLAH01\Administrator, Id: S-1-5-21-3086296020-3121675482-1484945983-500
Working directory: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeTimeZonePrivilege, display name: Change the time zone, not enabled.
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeCreateSymbolicLinkPrivilege, display name: Create symbolic links, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, di

Hello Rafael,
I'm also about to install an IDES EHP7 ERP 6.0 and have seen that the Support Release 2 is available. Perhaps this will help you to go forward.
Best regards,
GP

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

Error in the SAP ERP 6.0 Installation

Hello everybody,
i have a error in the phase 43 of 46 in the ERP 6.0 Installation.
Here are my UTL_configure_usages.log , i hope everone can help me by the solution. It´s my first time at the Installation of a SAP System.
+Path   : Exception : The Usage Type SM-APP/sap.com from product SOLMAN is not activated!+
+java.lang.Exception+
++     at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1141)++
++     at com.sap.exception.BaseExceptionInfo.(UTInfoException.java:94)++
++     at com.sap.sl.ut.manager.persistence.db.InfoManager.setConfigured(InfoManager.java:450)++
++     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.setConfigured(DataBaseInfoFactory.java:1504)++
++     at com.sap.sl.ut.manager.command.Configure.execute(Configure.java:30)++
++     at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)++
++     at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:74)++
++     at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:70)++
++     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)++
++     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)++
++     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)++
++     at java.lang.reflect.Method.invoke(Method.java:324)++
++     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)++
+Jan 18, 2010 2:52:21 AM Info   : Precondition not fulfilled. The Usage Type needs to be active. Return code: 56+

An error occurred while processing service SAP ERP 6.0 Support Release 3 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog: SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: And here are my logfile , i hope you can help me for a solution. I have restart the SAP System and start it again and click retry but nothing happen, the same error comes again. Jan 19, 2010 7:34:14 AM Info: Initial deployment: Selected development component 'tc/kmc/bc.uwl.ui/wd_pp'/'sap.com'/'SAP AG'/'7.0010.20061109164817.0000'/'1' will be deployed. Jan 19, 2010 7:34:14 AM Info: No action: Selected development component 'com.sap.portal.nav.ws.NavigationWSEar'/'sap.com'/'SAP AG'/'7.0014.20071210113331.0000'/'2' will not be deployed because containing software component 'EP-PSERV'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210193159''/'2' will not be deployed. Jan 19, 2010 7:34:14 AM Info: No action: Selected development component 'caf/eu/gp/ui/gpconf'/'sap.com'/'MAIN_APL70VAL_C'/'1534144'/'3' will not update currently deployed development component 'caf/eu/gp/ui/gpconf'/'sap.com'/'MAIN_APL70VAL_C'/'1534144'/'2'. Jan 19, 2010 7:34:14 AM Info: No action: Selected development component 'caf/eu/gp/croom/content'/'sap.com'/'MAIN_APL70VAL_C'/'1498043'/'3' will not update currently deployed development component 'caf/eu/gp/croom/content'/'sap.com'/'MAIN_APL70VAL_C'/'1498043'/'1'. Jan 19, 2010 7:34:14 AM Info: No action: Selected development component 'com.sap.prt.ws.container'/'sap.com'/'SAP AG'/'7.0010.20061109164817.0000'/'2' will not be deployed because containing software component 'EPBC2'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152356''/'2' will not be deployed. Jan 19, 2010 7:34:14 AM Info: Ending deployment prerequisites. All items are correct. Jan 19, 2010 7:35:49 AM Info: Saved current Engine state. Jan 19, 2010 7:35:49 AM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/ws/msosrv'/'sap.com'/'MAIN_APL70VAL_C'/'963790'/'3' will be deployed. Jan 19, 2010 7:35:49 AM Info: SDA to be deployed: C:\usr\sap\DRC\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\ws\msosrv\MAIN_APL70VAL_C\3\963790\sap.com_cafeugpwsmsosrv.sda Jan 19, 2010 7:35:49 AM Info: Software type of SDA: J2EE Jan 19, 2010 7:35:49 AM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ***** Jan 19, 2010 7:35:56 AM Info: Begin of log messages of the target system: 10/01/19 07:35:50 - *********************************************************** 10/01/19 07:35:51 - Start updating EAR file... 10/01/19 07:35:51 - start-up mode is lazy 10/01/19 07:35:51 - EAR file updated successfully for 47ms. 10/01/19 07:35:51 - Start deploying ... 10/01/19 07:35:51 - EAR file uploaded to server for 32ms. 10/01/19 07:35:56 - ERROR: NOT deployed. The Deploy Service returned the following error: For detailed information see the log file of the Deploy Service. Exception is: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers. at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:700) at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:688) at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180) at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427) at java.lang.Thread.run(Thread.java:534) ; 10/01/19 07:35:56 - *********************************************************** Jan 19, 2010 7:35:56 AM Info: End of log messages of the target system. Jan 19, 2010 7:35:56 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) ***** Jan 19, 2010 7:35:56 AM Error: Aborted: development component 'caf/eu/gp/ws/msosrv'/'sap.com'/'MAIN_APL70VAL_C'/'963790'/'3', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'3': Caught exception during application deployment from SAP J2EE Engine's deploy API: com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers. Exception is: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers. at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:700) at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:688) at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180) at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427) at java.lang.Thread.run(Thread.java:534) ; (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC) Jan 19, 2010 7:35:56 AM Info: Starting to save the repository Jan 19, 2010 7:35:57 AM Info: Finished saving the repository

How to input text in the SAP ERP intial screen.

Hello.
How to input text when I load the SAP ERP system. before log in.
(this screen show me only the ID and password input fields)
I saw the initial screen inclued some user-customized text.
I can not find any information about initial scrren, as before the log in.
If you know how to do, please let me know.
thank you.

The problem was solved.
I found notes about this case. notes number is 205487.
process like this:
1) using transaction se61
2) change 'document class' field -> 'General text'
3) input Name field [ZLOGIN_SCREEN_INFO]
4) Click Create button.
5) and u can see the text-editor
6) insert ur message and save.
that's all
If u want more information or erre message, read the notes 205487.
bye

Gettin data from SAP R/3 4.7 unicode sys to SAP ERP non-unicode sys via RFC

We are trying to get data from SAP R/3 4.7 unicode sys to SAP ERP non-unicode sys via RFC. We are reading field from the database via FM and this field got converted by SAP standard Method (CL_ABAP_CONTAINER_UTILITIES=>fill_CONTAINER_C) from structure. When reading this field from ERP sys and converted back to structure using SAP standard Method the value is un-accurate, and different(blank) giving values.
How, if the data originally was a char or numeric it works fine, but not for decimal.
best regards,
Abu-Qaht

I have a range fields with different type of ranges, am saving these to the database by converting them to a string via the same method. I got the same problem so I tried to convert the string to xstring using function SCMS_STRING_TO_XSTRING, before send it to the other system, but the function raised an exception: CX_SY_CONVERSION_CODEPAGE

E-commerce 5.0 for SAP ERP 6.0 ehp3: detailed description of product

Hello community,
I have installed and customized B2C shop (version 5.0) for SAP ERP 6.0 (NO TREX, NO IPC).
At first i maintained my shop with english language and after i checked out that all work properly i decided to localize it for russian language.
I created new shop for russian language and faced the following problem: list of products in my shop displays correctly but when i want to check detailed description of product (click on product in list) i see something like this &#1053 &#1086 &#1091 &#1090 &#1073 &#1091 &#1082 instead of description on russian.
Can somebody help me to sort out this issue?
Thanks in advance.
BR,
Dzmitry

HI,
I can obtain detailed description of product on russian after i installed SAP E-commerce for SAP ERP version 7.0 instead of version 5.0.
Br,
Dzmitry

Cluster for SAP ERP 6.0

Hi,
My enterprise plans to use SAP ERP 6.0. System will it is torn on a cluster from 2 nodes. As OS we plan to use Windows 2008 R2. For cluster development I use the document "Installation Guide SAP ERP 6.0 - EHP4 Ready ABAP on Windows: Oracle
(Based on SAP NetWeaver 7.0 including Enhancement Package 1) ".
In chapter 7.3.4"Installing the Central Services Instance for ABAP (ASCS)" for creation of cluster group it is underlined:
k) Right-click the service and application SAP <SAPSID>.
l) Choose Add a resource Add File Server.
m) Double-click New File Server.
n) In the New File Server Properties window, change the Resource Name from New File Server into SAP <SAPSID> FileServer.
Problems in that in the parameter list "Add File Server" in the menu "Add a resource" is not present. The server possesses such role, nevertheless "Add File Server" in the list misses.
How to me in that case to fulfill requirements on creation service and application SAP <SAPSID>?
P.S. All updates on ноды a cluster are installed
P.P.S Points of the instruction are carried out to k).
Alex

Hi,
I'm afraid that you have used Windows Server 2008 R2 which is yet to be supported by SAP ([Reference|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1383873]).
Check whether you have the cluster configured at the OS level and also check whether you are able to resolve the IP address of the cluster nodes from your virtual host.
If needed get help from your network admin and carry out the necessary checks for a clustered environment at the OS/network level.
Regards,
Varadharajan M

Change font size of WEBGUI in SAP ERP

Hi all,
I need to change font size of WEBGUI in SAP ERP.
It is easy to change it in Webgui of SAP BI, using Internet Explorer functionalities (View -> Text size -> Largest), but same procedure doesn't work for transactional SAP modules (i.e. SAP HR).
Do you know how I can change the font?
Alternatively, do you know if it exists any patch or support package to resolve the problem with IE?
Thank you in advance,
regards
katia

Hi Katia,
there is - as far as I know - no way to change the fonts size of the WebGUI screens. The way the lay-out of the Dynpro screens and its controls is determined does not allow to scale by different font sizes.
regards
Tobias

Cannot bring up the SAP ERP 6.0 Installer GUI on a linux redhat 5.4 machine

Hi,
I'm trying to install the SAP ERP 6.0 on a Linux Redhat 5.4 machine and the gui for the install does not come up
Here is the message
sudo ./sapinst
Password:
[==============================] \ extracting... done!
Starting GuiServer using:
/usr/bin/java -Xmx256M -Djava.security.egd=file:/dev/urandom -cp /tmp/sapinst_exe.24750.1283972427/JAR/instgui.jar:/tmp/sapinst_exe.24750.1283972427/JAR/inqmyxml.jar SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
init: retrieving account information for group sapinst...
init: retrieving account information done.
load resource pool /remote/repeng5/SAP/sd_benchmark/Extracted/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host inspired.sybase.com, port 21200 to continue with the installation
My env. is the following
java -version
java version "1.6.0"
OpenJDK Runtime Environment (build 1.6.0-b09)
OpenJDK 64-Bit Server VM (build 1.6.0-b09, mixed mode)
Memory in the machine is 16 GB. I have tried bringing up the installer on a different linux redhat 5.4 machine and there are no issues there
Any help/pointers would be greatly appreciated

Thank you both for your reponse.
I did try changing the java to 1.4.2 but I still get the same behaviour. The gui just hangs.
Here's my new env.
java -version
java version "1.4.2"
gij (GNU libgcj) version 4.1.2 20080704 (Red Hat 4.1.2-46)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

SAP ERP Security Problems

Similar Messages

Maybe you are looking for