SAP Error message-3G 208

Hi,
We are getting the following error when the simulation of payroll posting.(prog name RPCIE00)
3G 208-Account assignment objects could not be checked.
All the cost object assignments are in place.
We have also checked relevant SAP notes 1099560 ,1073250 and 1090868.All the notes have been applied.
Please advise how to proceed.
Thanks
Aravind
Edited by: Aravind on Mar 26, 2009 6:17 AM

Hi Aravind,
Sometimes, SAP note 1099560 can avoid original error (3G473), and are instead getting the error 3G208 - "Account assignment objects could not be checked".
Therefore please implement note 1166549. It should resolve your issue.
Best Regards,
Vanessa.

Similar Messages

How to search for a standard sap error message

Hi all,
    I want to know where exactly we need to search for a standard sap error message ( For example like STACK_NO_ROLL_MEMORY).
    I am searching the same in sap market place/oss note search...but don't see what I am looking for ...
   Could you please help on the same ?
Thanks,

Hi Shravan,
Normally system throws up an error when it reaches the threshold point. Normally the threshold / critical points are arrived at by considering the SAP recommended values and what is the sytem configuration you have got.
In true project scenario because of budget constraints we might not be able to have ideal system configuration which SAP recommends , in that case we have to tune to the system perform at an optimum level considering various aspects
In yr case memory parameters should have been set at level , but for yr job it needed more memory which it could not allocate and throwed an error.
hope i have answered yr question .
Regards
Balaji

How to find out where sap error messages stored...

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Hi,
I also got the same message when that message no is not there
E:SABAPDOCU:000 test
yours is S-type and message id ZY and message no 127
127 is not there either change the no or create the same
Regards
Shiva

How to find out where sap error messages stored in our system

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Are you interested in WDA messages ?
The set a breakpoint in METHODS IN class CL_WDR_MESSAGE_MANAGER.
Then use call stack (default desktop 2 in debugger) to see where message is added to message manager.
regards
phil

SAP Error Message KI294

Good Evening PS Gurus,
While entre hours for network we are getting
System error network activity with invalid internal number
SAP Error Message KI294
When we add network activity again ,there is no
error.
SAP Note 70698 is not valid for our system.
Please help
Thanks
PY

Hello Again,
We are having the same issue again in custom program Here user is trying
to post expenses for the network
Please help
Thanks
PY

T.code F-55 statistical entry into SAP error Message no. ZFICONV_MFF002

Hi,
I want to enter bank guarantee given by vendor but at the time of saving it is giving error ZFICONV_MFF002. When clicked line item it is going to amount field. No other descriptin of error available. Can anybody help?
Thanks

Given that the message is in the customer namespace (begins with Z), it seems like a custom message in your environment. If there is no long text on the msg, perhaps you could get with an ABAPPer and look at the code to see what triggers the messsage. You can do a where used on the message from the ABAP workbench by doing the following:
1. Goto txn SE80
2. Choose Edit Object.
3. From the pop up goto the "More" tab
4. Choose the radio button Message Number and enter the message class (ZFICONV_MFF) and the message number (002)
5. Click the Where Used icon
This will potentiallly return a list of programs/functions/classes/etc. where that message is raised (if the message is coded using the Message abap statement) and you should be able to figure out the issue from there.

SAPGUI - cantch error messages.

Hi,
We would like to whether there's a way to catch SAP messages (mainly error) instead of looking in the SAPGUI.
We developed a product ([sap error message solution|http://steeryou.com/solutions/das]) that helps user to solve SAP error and we found that there are cases that the error message can be somtimes in statusbar and in other cases in a popups.
Is there a way to connect SAPGUI and get the error messages shown to user instead look for it in SAPGUI ?
Thanks a lot,
Assaf
Edited by: assaf hayout on Jan 18, 2012 3:39 PM
Edited by: assaf hayout on Jan 18, 2012 3:42 PM

Going to need a Lot more info to be of any assistance. As Sig said what OS is running in Fusion. What version of Fusion. What version of QB. Did it ever run. Do you have the network setup in the Fusion OS. Have you installed VMware Tools.

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
 at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
 ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
 at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
 ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

Automatic Error Message in SAP PI 7.1

My scenario in SAP PI 7.1 is like this:
1. If an XML message fails in validation of structure, that is the structure is not as per the message schema or any field contains data that is incorrect as per the business requirement, then SAP PI should not further process the message (i.e. reject the message or mark it as invalid)
2. As soon as the message is marked invalid (as described in point 1), PI will have to automatically generate a error or a failure message containing reasons why the original message falied. The structure of automatic error message should be predefined in PI (e.g. a schema)
My question is, how to achieve the above two scenarios in SAP PI 7.1
Thanks a lot for your immediate reply
Edited by: Chitrabhanu Raychowdhury on Aug 16, 2010 12:45 PM

>
> 1. If an XML message fails in validation of structure, that is the structure is not as per the message schema or any field contains data that is incorrect as per the business requirement, then SAP PI should not further process the message (i.e. reject the message or mark it as invalid)
>
implement XML Validation concept,we do have a oppurtunity to validate XML document before picking up,it will check against correct structure.if any the data wrong you can show error at adapter engine level only,we can do this one IE level and AE level.
search in sdn ,there are many documents.
> 2. As soon as the message is marked invalid (as described in point 1), PI will have to automatically generate a error or a failure message containing reasons why the original message falied. The structure of automatic error message should be predefined in PI (e.g. a schema)
>
we can't mark the file invalid using PI i think
> My question is, how to achieve the above two scenarios in SAP PI 7.1
>

Error message in SAP Travel Management

Hi alll,
I am trying to change an address in PRMD tx code
Error message: Enter a house number
Also it is not possible to change existing addresses as the same error comes up.
I also tried in other company codes and there it seem to work fine so the issue might only be for company code 0376
Could you please let me know if there is any restrictions from the field u201Cstreet and house numberu201D so that it can be entered and changed as free form text?
Thanks for your help!
It is SAP 6.0

Are you sure you mean PRMD? This is the T-code to update HR master data and is not related to travel management!
Did you mean PRAA perhaps if you were trying to update master data from HR to vendor as there are some known issues around the structure of the PRAA report and house number and address (see the notes 570023 and 663350)
cheers
Sally

Error message in SAP Easy DMS

Hi there,
Is there anyone who has come across the error message "Classification data can only be maintained using a change number" in SAP Easy DMS. How can one resolve this issue?
Patrick

Dear Patrick,
please see my suggestion in thread http://forums.sdn.sap.com/thread.jspa?threadID=1911999&tstart=0.
Best regards,
Christoph

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
 Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
 Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
 Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
 Last error logged in SAP kernel
 Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
 2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
 follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
pls, award points

SAP Error message-3G 208

Similar Messages

Maybe you are looking for