SAP Exchange Infrastructure 2.0 means WAS existe?

Hi,
I juste intalled IDES instance, one of the version coponenent installed is SAP Exchange Infrastructure 2.0.
that is it mean WAS astalled to?
How to setup WAS to get XI access,
Thanks,
FF

Hi,
SAP NetWeaver Exchange Infrastructure(XI) runs on the SAP NetWeaver Application Server (previously call SAP Web AS).
The SAP NetWeaver XI 2.0 release runs on the SAP NetWeaver AS 6.20 release.
The SAP NetWeaver XI 3.0 release runs on the SAP NetWeaver AS 6.40 release.
The SAP NetWeaver AS is automatically installed when you install SAP NetWeaver XI - no special actions are required for installation. Just follow the post installation steps in the installation guide and you should be ok.
cheers,
mike.

Similar Messages

ASAP Implementation Roadmap for SAP Exchange Infrastructure

Does anyone know if the "ASAP Implementation Roadmap for SAP Exchange Infrastructure" is still available somewhere?
I'm looking for templates for documenting XI flows.
thanks!

hi,
try this link:
https://websmp109.sap-ag.de/~sapidb/011000358700004919702004E
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

SAP Exchange Infrastructure

Can any one tell me about SAP Exchange Infrastructure, what is it, where it is reqd., what r the requirements to install it, or any source of material to read
abhishek

Hi Abhishek,
As u got .....the basic information. check these links for further info.
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
Also for more info related to XI go through these links:
XI -Starter
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
To understand the architecture of XI, Please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
1) How-to Guides for SAP NetWeaver 2004 for SAP XI:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
Regards,
Priyanka.

Book: SAP Exchange Infrastructure for Developers; Outgoing INVOIC

Hi everybody,
is in book SAP Exchange Infrastructure for Developers written how to send/generate a INVOIC-IDOC in R/3 or ERP?
Or do they just describe the steps in XI?
Thanks
Regards
Mario

Hi,
>>>AFAIK you do not describe how to generate a IDOC in R/3.
come on... what about the whole chapter - "Outbound Invoice" ?
the whole R3 config is shown and how to generate the invoice IDOC
with screens - what else would you need?
you didn't read it - shame on you:)
Regards,
Michal Krawczyk

SAP Exchange Infrastructure Tuning Guide

My problem is to apply of tuning guide.
There is a table at page:8
3.1.1 SAP Profile Parameters
Question 1:I know I must use RZ10 to input these parameter.But which profile must I use?
there are 3 profiles
1- DEFAULT
2- BXD_DVEBMGS00_BRCKXITS
3- START_DVEBMGS00_BRCKXITS
Question2: If I don't want to use RZ10, can I apply that parameter manually inside the pnecessary profile?
Thanks

Hi Cemil,
Question 1:I know I must use RZ10 to input these parameter.But which profile must I use?
U should use <SID>_<instance name>_<hostname>.
So in my opinion BXD_DVEBMGS00_BRCKXITS according to this
http://help.sap.com/saphelp_nw04/helpdata/en/ad/4b09411d57ef23e10000000a155106/content.htm
Question2: If I don't want to use RZ10, can I apply that parameter manually inside the pnecessary profile? 
You can edit this file by using a text editor (when you have a Java-only installation) or by using transaction RZ10 (when you have a double-stack system). When editing this file, make sure that there is an empty line at the end of the file.
For RZ10 limitation - SAP Note 579190
For double-stack systems, see also SAP Note 741289
Regards,
Prateek
Message was edited by:
Prateek Srivastava

SAP Exchange Infrastructure 2.0 configuration

Hi!
Does anyone could put configuration guide mentioned in toipc in my inbox siarhei.tsikhanenka(at)gmail.com? I tried to download it from Service Market Place but got a message that object does not exist.
Thanks and Regards,
Siarhei

Hi,
please have a look here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5030f47a-d411-2a10-c2a5-b6a26a295231
Regards
Patrick

Can we install exchange infrastructure into existing server?

can we install exchange infrastructure into existing server?
I have installed ECC6 IDES,now I want to install XI, Can I install it to ECC6 IDES server ?
how to install ?

Hi
Check this note may help you
Note 883948 NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Regards
Uday

Exchange infrastructure & Integration broker

Hi Experts
Does the terms Exchange Infracture and Integration broker means the same. If not wat is the difference between them.
Regards
Saravana

Hi Saravana,
Integration Broker is an SAP NetWeaver capability (that is, the features for a technological area of SAP NetWeaver) that is supported by SAP NetWeaver Exchange infrastructure (XI).
SAP XI is an Middleware Integration Tool ( Integration Broker )
http://help.sap.com/saphelp_nw70/helpdata/en/43/71375eb5263457e10000000a422035/frameset.htm
Chk out in the Process Integration layer of the Netweaver Stack-layer.
http://help.sap.com/saphelp_nw70/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Hope this was helpful.....
kanan

PI7.0: SLD - Technical System of type "Exchange Infrastructure"

Hi Guys,
The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps
1. Switch to "Home" in the "Technical Landscape" view, and select the
"Exchange Infrastructure" technical system type there. Select all
domains and XI components for the host and delete these by selecting
them and pressing 'Remove'.
2. Restart the J2EE server. After you restart the server, the XI
components log on to the SLD again and create a new entity of class
"XI Integration Server".
3. To register the directory and repository again, you must also log on
to the two tools.
I have restarted the j2ee server and looged into the IR and ID but they are not automatically registered in the central sld.
central sld is on solmanger box. How to register IR, ID, RWB and central adapter engine under the technical systems of type exchange infrastructure ?
any help would be really appreciated
Thanks,
Raj

Hi Reddy,
i faced the same problem few days back...
check this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
and also cross-check the post installation steps.
In my case the Business system for XI was created of type web as java... but it should be of type web as abap.
Sachin

Login problem with SAP Mobile Infrastructure

Hi
 I have installed SAP WebAS 6.40 SP9 .
i could see SAP Mobile Infrastructure if i use the following URL -
http://<localhost>:50000/me/WebConsole/login
but i am not able to login with any of the SAP WebAS logins it is giving a error.
 I have also installed SAP GUI for windows to which i am able to login using DDIC login of SAP WebAS.
 It will be helpfull if any one can tell me how to check if the entries in the SAP MI login page are correct like the System ,client,system number,language,user and the password.
Thanks and Regards
gopi

Hi Gopi!
To install MI Client on a Desktop PC,look for the setup.exe file in MI folder in the "Netweaver Components" installation DVD,run one of these setup files based on the framework you need(MOBILEENGINE_JSP or MOBILEENGINE_AWT).
<...\MI\MI2.5_SP09\JSP\win32\comp\setup.exe>
<...\MI\MI2.5_SP09\AWT\win32\comp\setup.exe>
Then run MobileEngine.Exe(After installation you will have a shortcut on your desktop),Create a New User to LogOn and then "Goto>>>Settings" and set up the connection parameters to logon.
Refer to the Installation Guide using the link from Jill Elliot.
I donot understand what do you mean by "setting changes after installing the SAP WebAS 6.40 SP 09?"
Thx
Gisk
Message was edited by: Gisk

SAP AutoID Infrastructure vs Sybase SUP Mobile based solutions for RFID???

Hello All,
I'm trying to come up to speed on the basics as we have projects going that have RFID, Barcode and mobile design implications. As mobile has evolved we're looking at some opportunities give the number of consumer level devices available. We know we won't be able to simply replace all existing (ruggedized, etc) devices but the oppertunity is there to do some new things, or old things with new devices. At the same time we have our existing RFID infrastructure (Not SAP AII). My question is... is there any overlap between an SAP AII infrastructure and Mobile Infrastructure? For example from what I gather an AII infrastructure typically has an RFID middleware for data management device monitoring, etc that is integrated with SAP AII. Sounds very similar to mobile architecture with a middleware piece taking care of decide management data integration & management etc. Kind of troubling to me that 2 pieces of heavy infrastructure are needed for these two scenarios. Oh and lets talk XMII also which we also have installed.
So just comming up the curve on all this. Is there any overlap here where RFID architecture could be handled by a good mobile design? I suspect any overlap is conceptual and the rub will be the device support.
Thanks,
Doug

Hi
I have been following SAP Mobility as well. These are my gathering.
SAP Sybase SUP - This is being recommended for heavy weight applications. There are additional components on the SUP layer as, Sybase Control Center and Afaria for monitoring and device management.
Project Gateway - This is being recommended for light weight application. It does not require any additional infrastructure, only software components to be added. I have not heard of any release date for this product. Conceptually it seems very good and based on the demo that was presented in Tech Ed 2011, the development was very simple as well.
ITS Mobile - This is integrated ITS in ECC. SAP console has been replaced with product. This is used mainly for the RF transactions in Warehouse Mgt. No additional infrastructure, some minimum configuration and ABAP development.
BI Mobile - This requires an additional infrastructure and software components to be added where by BI can interface with the mobile devices.
SAP Sybase have also built solutions for Workflow using the SUP platform.

Exchange infrastructure user menu

How I do make the user menu for exchange infrastructure always enabled. (Especially when I logged on as a client).
Any help is greatly appreciated
Natarajan

Raj,
I logged on to the discovery system and try to configure the demo for airline tickets system. As part of the configuration, in the documentation provided by SAP, I had to logon as a client and look at the user menu for exchange infrastructure. When I log on as client, the icon for user menu was disabled and I do not know if there is any transaction code I can enter which will show the exchange infrastructure menu.
Natarajan

Diff b/w netweaver platform and exchange infrastructure.

Dear SDNers,
I am new to net weaver.first of all what is the diff b/w netweaver platform and exchange infrastructure.
i want to learn more about net weaver.if anybody give me the links, i would be grateful to them.
reward sure...
Senthil kumar

Hi
N/W is a set of new dimensional products that SAP uses for Integration of different Business entities like the "People" , "Information" and "Process"
XI is part of the Process Integration layer.
Regards
krishna

Problem in importing SAP Exchange profile (BASIS settings) - Urgent

Hi,
I am currently facing problem in importing SAP Exchange profiles manually.
When i enter into http://<J2EE_host>:<J2EE_port>/exchangeProfile with username as PISUPER, the page is getting loaded but
1.it shows a error message stating, Name or password is incorrect
2. When i ignore that error and proceed with the connections tab to edit the server settings, i cannot set the password for PILDUSER. It again says, Name or Password is incorrect..
What could be the reason for these errors. Please help me... This is very urgent....
Thanks in advance,
Rose

Thanks for your response guys. I checked for PISUPER and PILDSUPER in SU01 and checked for lock but it shows an error message saying User doesnot exist.
Kindly let me know how to procced on in this case.
Thanks and Regards,
Rose.

What is a container variable in BPM (Exchange Infrastructure)?

In BPM scenario with Exchange Infrastructure, I have come across container variable. What is this container variable? How it is used in BPM?
In another instance I read that to trigger a alert in BPM I have to create a container variable. So I have another question, What steps I have to follow to create a container variable and trigger alert?

Hi,
To create alerts in XI , check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
ALso, if you are on SP14 and above, check this note 913858.
The container variables that are accepted while createing Alerts in XI are available on this link,
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards,
Bhavesh

SAP Exchange Infrastructure 2.0 means WAS existe?

Similar Messages

Maybe you are looking for