SAP F&R - Order Proposals not getting generated

Hi Experts,
I am currently on SCM 5.0 system. For a location-product on uploading the consumption data, the forecast gets generated but no Order Proposals are getting generated at all. When I look at the Source of Supply, the delivery dates for the location-product are appropriately displayed.
The scenario is basically Vendor -> DC -> Store i.e. V111 -> R601 -> R611 for the product FR11. The time series of supplying location is displayed for FR11-R611 in CADE while FR11-R601 is not displayed. I suppose, this may be, why the OPs are not getting generated. How do we generate time series for FR11-R601 i.e. for V111 (vendor) ?
Also, When i try to run a location status check on R611, /FRE/FU_CL_FRP_SAFOUT_CRIT comes out with a fatal error with the remaining others in an INITIAL state. How do we resolve this issue.
Thanks & Regards
Prashant

Hi,
I was able to solve both the issues with a change in the Forecasting Frequency profiles where the reference day for start week was on "FRP Location Activation Date". I changed it to Calendar date and checked the forecast and it worked with the Order proposals also generating. Also, the location status check out for the mentioned location was in "OK" state.
Also, a second methodology applied to overcome the problem was to go to SAP Menu -> F&R Processor -> Administration, from there go to the location tab where the locations had a deactivation date of 31.12.2009. I extended the date and then there was no need to change the forecasting frequency profiles.
Regards
Prashant
Edited by: Prashant Kedare on Mar 3, 2010 9:38 AM

Similar Messages

After MRP planned orders are not getting generated?

HI,
Our bussiness is make to stock and repetetive manufacturing.
We have a prob in running MRP, i enter the demand in MD61 on day basis and after running MRP for some materials all planned orders getting generated wrt to demand but for some materials only some planned orders getting generated means it's not taking full demand ex i have material A and paln is 1000 for 10days i entered demand in MD61 for 10days 100 each and if B material is having same 1000 demand so i enter 100 each then i run MRP and the out put is im getting 10planned orders with 100 each qty for A material where as for material B im not getting full 10 orders only 2 or 3 with 100 each what could be the reason ?
Thanks
KK
Edited by: kiran kumar on Mar 23, 2010 10:19 AM
Edited by: kiran kumar on Mar 23, 2010 10:20 AM

Dear Kiran,
As your saying it is Make to Stock, system will consider Availble stock in Net Req. Calculation
what is startegy mainatined for A & B
if you go with Strategy 11 then system will not consider the stock & Creates the requirements
Regards
Madhu

Sap customizing request pop-up not getting generated

Hello Experts,
I am facing a problem while generating customizing transport request, the transport request creation pop-up is not coming,
Checked in scc4 - customizing chenges allowed + automatic recording is set and client role is customizing , but still i am unable to see any pop-up for the transport request creation . Please help!!!!
Regards
Shubhangi Pandey

Hi,
You might have more success raising this question in the relevant functional forum, transaction OOEG does not seem to use generated table maintenance but here on the ABAP development forum you're pretty likely to keep getting the same answer.
Regards,
Nick

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

Planned order not getting generated at plant level

Hi experts,
When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing to generate planned order in plant level.....
Regards,
Joseph.
Edited by: joseph5885 on Aug 12, 2010 9:23 AM

Dear Joseph,
No it is not recommended. only in emergance cases this will be done
Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
So the above said t-codes will take care of the same
Added
Refer this link
[Planning file entry;
Regards
Madhu
Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

Purchase Requisition not getting generated in APO

Hi,
I am facing an issue in APO. Once I confirm a sales order, I have to run the Product Heuristic in APO to generate the purchase requisition through rrp3. The problem is the purchase requisition is getting generated without the PR number. The line does not show the number and also the purchase req is not reflecting in ECC. Please refer the screenshot. Kindly help me with this.
Thanks & Regards,
Raja S

Hi Guys,
Sorry for the delayed response. Now got another issue. My CIF model for a Sales Order is not getting activated. I also cleared the queue in APO through /sapapo/cq and then start running the CIF. But it runs for a long period.
What could be the other possible issues with CIF model activation?
I am getting a message box like the below when try to activate the CIF. I keep ignoring the message and trying to run the CIF. But still I am unable to resolve. Kindly help
After resolving this only, I can go for the above mentioned issue. I sincerely thank all your support.
Regards
Raja S

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Task activities not getting generated properly in BPEL

I am using the Jdev 11g TP3 (from OTN). Installation went through fine. However I observed a interesting issue with HumanTask/BPEL and I was wondering if someone faced similar such problems before, if so, how to rectify the issue. Here is the description of the issue:
1. Created a Empty SOA composite project
2. Dragged and dropped BPEL Process in the component palette. Designed a Asynchronous process.
3. Dragged and dropped a HumanTask. Did not expose as an composite. Designed a single approver workflow. In the project schema, choose the schema from BPEL input.
4. Wired BPEL to HumanTAsk
5. In the BPEL flow, I dragged the HumanTask to the flow. Everything appears to be correct. I clicked on "Ok" after associating with BPEL variable.
Now when I examine the BPEL flow, a scope before the BPEL switch is empty. There are no BPEL activities generated. This is a very simple case of BPEL and HumanTask and I am not sure as to why the tasks not getting generated properly in BPEL flow.
Has anyone experienced this issue or any ideas as to why this could happen?

After going through the exercise several times, I finally found out the reason as to why the BPEL activities are not getting generated. In the Human task form for the title, since it is a fixed string in my case I put something like the one given below:
Title : "APPROVE ORDER"
When you have fixed string within double quotes it does not generate BPEL activities correctly. You can try and u will see the problem.
My real question is should not throw proper error message when you try to drag and drop the HumanTask to BPEL flow.

Reports not getting generated

Dear All,
I know this is a repeat query but im unable to find information from the blogpost http://scn.sap.com/docs/DOC-41109.
I have earlier configured the WWI setup in a linux server. Now I am testing it on a windows server. I have made all the configurations in word and for generation server. The issue is, the report is not getting generated in report management screen and is in status Generation possible always.
When i check the wwi monitor, the doc type SBR is getting released but not getting completed. Please see the screenshot. CGSADM is working fine, RFC is working fine. I tried creating documents in CV01N and they are getting created. The DCOM settings are also good and activated the permissions there too. The DMS settings are set as per the SAP notes. However The job i scheduled is in status Finished for document generation. But when I try to generate the report, the report is created using a variant and the status of the report is in generation possible always. I checked the variant of the report and the validity is in REG_WORLD. I understand that there is some issue in the scheduled job.
I have scheduled only one job for Document Generation as follows.
a)Enter the job name - DOC GENERATION and choose a job class - A.
d) Choose Start condition and in the dialog box, choose After event.
e) Enter SAP_SYSTEM_START in the event field.
f) Activate Periodic job - HOURLY
g) Choose Check and save your entries.
h) Choose Step and choose ABAP program in the dialog box that appears.
i) Enter RC1WWIDS as the ABAP program name.
j) Choose Check and save your entries.
k) Before you leave the Define Background Job screen, you must save your entries once more.
Result: The job is started whenever the SAP system is started.
aFTER REPEATED ATTEMPTS, THE RESULT IS THE SAME AND NO CHANGE IN STATUS OF THE REPORT.
Kindly suggest what step am i missing . I have been through all the blogs in SCN. My old blogs are however missing and hence I am not able to access them.
I am using SAP GUI 7.30, ECC6 and EHP 5.
Regards
Dhinesh

Dear Dhinesh
Please help me to understand your system landscape.
a.) Did you have had a SAP EHS up and running together with a "linux server" based WWI version
and
b.) now you are switching the same SAP system to a "windows server" based version?
I am not sure about your screenshots. But you seem to have more than one gen server attached to the same system; did you updated as well WWI?
So no adaption of general SAP set up (like DMS etc.)?
Therefore any job scheduled (before afterwards) is done using a SAP account having the necessary access rights?
Can you please check this:
1.) create several sessions; one with WWi monitor and one with CG02; try to generate a different report for the same spec id (e.g. not MSDSUS in EN, but MSDS/FR) and check progress in WWI monitor as well as CG50
2.) select in CG50 the report in status "generation possible"; mark it and try to "go" on ; check access rights afterwards (su53)
I hate this status "generation possible". I believe you need to use "debug replace" to remove that entry; I can not remember any more but that was the only option to get "rid" of this entry
Please read WWI cookbook, There is a set up possible in such a way that any action on WWI server is "logged"; may be try to analyze the log file to get idea why there is no progress regarding the generation
PS: the problem you have detected is not related to the "validity area". It is a matter of communication issue between SAP and WWI server and the WWI process can not be finalized.
But you are not alone with your problem (e.g. check:
http://www.benxbrain.com/en/sap/program/RC1WWIDS-Generation-possible-status-not-changing-thread-1-1547841.htm)
http://scn.sap.com/thread/3311944
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/H-ESEWSRSTAT
https://scn.sap.com/thread/1575223
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/ehs-wwi-processing-272462
Check as well your own thread: http://scn.sap.com/thread/3304285
C.B.
PS: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
as well as:
http://www.stechno.net/sap-notes.html?view=sapnote&id=580586
PPS I: logging feature of WWI is described here: Note 778684
PPS II: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
PPS II: may be check as well: http://scn.sap.com/thread/3344033
and http://scn.sap.com/thread/1381004

PR not getting generated in MD50

hello,
anybody please help me.
My scenario is make to order for FG & SFG. make to stock for RM & Packing material.
MRP TYPE : PD
For FG & SFG: Individual Requirement
For RM & Packing material: collective requirement.
RM & Packing materil Stratergy group : 10
Avilability Check : 02 (individual check)
My problem is when i doing MRP run by using MD50, Purchase request are not getting generated for RM & Packing material when there is not stock, no po & No PR. in MD04 it showing dependent requirement. again when i am doing MRP run with MD02 pr getting generated. please suggest how to resolve this issue.
my client is asking to generate PR at MD 50 only.
Thanks & Regards
bhakta

MD50 is for sale order planning, system will plan with respect to sale order only - you are considered the RM and packaging as a MTS scenario, then how the system will plan for RM and Packaging in MD50
are you procuring raw material with respect to sale order means
then for RM and packaging, remove the strategy group and maintain individual indicator, then run MRP in MD50, system will plan for RM and pacakaging material also

FI Doc not getting generated at the time of Asset GRN

Hi,
We have created Asset Purchase Order.
At the time of GRN, FI Doc is not getting generated.
What changes need to be required from MM side (in OBYC)
Regards,

HI PK,
whether your PO Item have Single Account Assignment or it is Multiple Account assignment.
Check Distribution in Accoun Assignment Tab at PO item level.
If it is Single account Assignment, then Accounting Document will be generated at GR where if it is Distributed then, no Accounting Document will be generated.
In your case, Probably it would be distributed. and as a result of this your PO Item is marked as 'GR non valuated'.
Check its Delivery Tab. If it is the case, then need not worry as it is std practise. system will treated it as multiple account assignment and its valuation will only be carried out Invoice Verification level.
Later on check the Material document also.
Pls Note:
If flag 'GR non-valuated' is set in the purchase order, the valuation is only executed through the invoice verification. This flag must be set if the purchase order has multiple account assignment.
A valuated goods receipt for a purchase order with account assignment generates a posting line for the consumption account 'Account-assigned purchase order' (KBS) and for the GR/IR clearing account WRX.
hope it address your issue.
Regards,
S Anand

Utl_file not getting generated

hi i wrote one procedure using utl_file , to check the output of the file in a text format and it was created successfully , intially it had problems with directory and i created that directory and even granted permissions using system user but nothing is happening the text file is not getting generated.
CREATE TABLE ITEM (IT_CODE VARCHAR2(12),IT_NAME VARCHAR2(20))
INSERT INTO ITEM VALUES ('A','AAA')
SQL> CREATE DIRECTORY MY_DIR AS 'C:\TEMP'; -- this is the path of my local folder
Directory created.
SQL> GRANT READ ON DIRECTORY MY_DIR TO ORION2007;
Grant succeeded.
SQL> GRANT WRITE ON DIRECTORY MY_DIR TO ORION2007;
Grant succeeded.
CREATE OR REPLACE PROCEDURE it_status
IS
v_filehandle UTL_FILE.file_type;
CURSOR itc
IS
SELECT *
FROM item
ORDER BY it_code;
BEGIN
v_filehandle := UTL_FILE.fopen ('MY_DIR', 'AAAA.TXT', 'w');
--Opening a file utl_file.putf(v_filehandle,'Item file :GENERATED ON %s\n',SYSDATE);
UTL_FILE.new_line (v_filehandle);
FOR v_it_rec IN itc
LOOP
UTL_FILE.putf (v_filehandle,
'Item Details %s are:s\n',
v_it_rec.it_code,
v_it_rec.it_name
END LOOP;
UTL_FILE.put_line (v_filehandle, '***END OF REPORT***');
UTL_FILE.fclose (v_filehandle);
END it_status;
{code}

i tried using get_line but there is a error
SQL> ed
Wrote file afiedt.buf
1 CREATE OR REPLACE PROCEDURE it_status
2 IS
3     v_filehandle   UTL_FILE.file_type;
4     CURSOR itc
5     IS
6        SELECT   *
7            FROM item
8        ORDER BY it_code;
9 v_txt varchar2(1000) := 'aaa.txt';
10 BEGIN
11     v_filehandle := UTL_FILE.fopen ('MY_DIR', 'AAAA.TXT', 'w');
12     --Opening a file          utl_file.putf(v_filehandle,'Item file :GENERATED ON %s\n',SYSDATE);
13     UTL_FILE.new_line (v_filehandle);
14     FOR v_it_rec IN itc
15     LOOP
16     UTL_FILE.GET_LINE(v_filehandle,v_txt,32767);
17     UTL_FILE.FCLOSE(v_filehandle);
18        UTL_FILE.putf (v_filehandle,
19                       'Item Details %s are:s\n',
20                       v_it_rec.it_code,
21                       v_it_rec.it_name
22                      );
23     END LOOP;
24     UTL_FILE.put_line (v_filehandle, '***END OF REPORT***');
25     UTL_FILE.fclose (v_filehandle);
26* END it_status;
SQL> /
Procedure created.
SQL> exec it_status;
BEGIN it_status; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 98
ORA-06512: at "SYS.UTL_FILE", line 656
ORA-06512: at "ORION2007.IT_STATUS", line 16
ORA-06512: at line 1

Accounting documents not getting generated for mvt. type 221 Q

Hi friends,
When goods are issued for consumption for project accounting documents are not getting generated.
I have tried with mvt. type 412 Q, 211 Q,
by mvt type 412 Q, the stock is transfered to project stock, it shows the stock of material in project stock, by movement type 211 Q the project stock gets consumed. So at the time of consumption of consumption account should hit and relevent accounting document should get generated. this is not happenning.
When i check material document and check for accounting document, message flashses that movement is not rrelevent for accounting.
Can any one throw more light on this?
Thanks and regards
SAP MM

Hi,
Please check in PO item details Delivery tab. In that GR Non-valuated checkbox might be checked.Generally for account assignment category asset it is ticked.
If you tick GR non-valuated check box then at the time of GR accounting document will not be created.Accounting document will be created only at the time of IR.
or
Have you mantained Chart of accounts.
have you mantained Valuation area settings
Transaction event key
Valuation class settings.
Check your material master data in accounting view have mantained Valuation class.
Check your back ground settings OMWN.

SAP F&R - Order Proposals not getting generated

Similar Messages

Maybe you are looking for