SAP failed to start after database restore
SAP Version: SAP R/3 Enterprise
Database: MSSQL Server 2000
OS: Windows
We had performed a database restore from the backup which was taken before the system rebuilt. The SAP failed to bring up as the dispatcher stopped due to the work processes died. After the database restore, we had run the SAP Tools for MSSQL Server but still did not manage to bring up the system. Please find below the logs for the developer trace and the dev_w0.
<b>dev_disp</b>
trc file: "dev_disp", trc level: 1, release: "640"
Wed Dec 05 11:03:58 2007
kernel runs with dp version 136000(ext=102000) (@(#) DPLIB-INT-VERSION-136000-UC)
length of sys_adm_ext is 524 bytes
sysno 00
sid Q02
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 196
intno 20020600
make: multithreaded, Unicode
pid 2896
***LOG Q00=> DpSapEnvInit, DPStart (00 2896) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 196 successfully loaded
shared lib "dw_xtc.dll" version 196 successfully loaded
shared lib "dw_stl.dll" version 196 successfully loaded
shared lib "dw_gui.dll" version 196 successfully loaded
shared lib "dw_mdm.dll" version 196 successfully loaded
Wed Dec 05 11:04:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3881]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >ibwoksapq02_Q02_00 <
DpShMCreate: sizeof(wp_adm) 15840 (1320)
DpShMCreate: sizeof(tm_adm) 2969176 (14772)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (424)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 07910040, size: 3386992)
DpShMCreate: allocated sys_adm at 07910040
DpShMCreate: allocated wp_adm at 07911B88
DpShMCreate: allocated tm_adm_list at 07915968
DpShMCreate: allocated tm_adm at 07915990
DpShMCreate: allocated wp_ca_adm at 07BEA7E8
DpShMCreate: allocated appc_ca_adm at 07BF05A8
DpShMCreate: allocated comm_adm_list at 07BF24E8
DpShMCreate: allocated comm_adm at 07BF2500
DpShMCreate: allocated vmc_adm_list at 07C391D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07C391F8
DpShMCreate: allocated wall_adm at 07C39200
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
Wed Dec 05 11:04:03 2007
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1476]
***LOG Q0K=> DpMsAttach, mscon ( ibwoksapq02) [dpxxdisp.c 10113]
DpStartStopMsg: send start message (myname is >ibwoksapq02_Q02_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 196
Release check o.K.
Wed Dec 05 11:04:43 2007
ERROR => W0 (pid 1368) died [dpxxdisp.c 12682]
ERROR => W1 (pid 2032) died [dpxxdisp.c 12682]
ERROR => W2 (pid 772) died [dpxxdisp.c 12682]
ERROR => W3 (pid 3272) died [dpxxdisp.c 12682]
ERROR => W4 (pid 2980) died [dpxxdisp.c 12682]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 3344) died [dpxxdisp.c 12682]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W6 (pid 2848) died [dpxxdisp.c 12682]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W7 (pid 3056) died [dpxxdisp.c 12682]
ERROR => W8 (pid 3308) died [dpxxdisp.c 12682]
ERROR => W9 (pid 596) died [dpxxdisp.c 12682]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W10 (pid 1988) died [dpxxdisp.c 12682]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W11 (pid 2136) died [dpxxdisp.c 12682]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1368 (SIGUSR2)
ERROR => DpWpKill(1368, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-2032 (SIGUSR2)
ERROR => DpWpKill(2032, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-772 (SIGUSR2)
ERROR => DpWpKill(772, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2508]
killing W4-2980 (SIGUSR2)
ERROR => DpWpKill(2980, SIGUSR2) failed [dpxxtool.c 2508]
killing W5-3344 (SIGUSR2)
ERROR => DpWpKill(3344, SIGUSR2) failed [dpxxtool.c 2508]
killing W6-2848 (SIGUSR2)
ERROR => DpWpKill(2848, SIGUSR2) failed [dpxxtool.c 2508]
killing W7-3056 (SIGUSR2)
ERROR => DpWpKill(3056, SIGUSR2) failed [dpxxtool.c 2508]
killing W8-3308 (SIGUSR2)
ERROR => DpWpKill(3308, SIGUSR2) failed [dpxxtool.c 2508]
killing W9-596 (SIGUSR2)
ERROR => DpWpKill(596, SIGUSR2) failed [dpxxtool.c 2508]
killing W10-1988 (SIGUSR2)
ERROR => DpWpKill(1988, SIGUSR2) failed [dpxxtool.c 2508]
killing W11-2136 (SIGUSR2)
ERROR => DpWpKill(2136, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:04:53 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Wed Dec 05 11:04:53 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1368 Ended no 1 0 0
1 DIA 2032 Ended no 1 0 0
2 DIA 772 Ended no 1 0 0
3 DIA 3272 Ended no 1 0 0
4 DIA 2980 Ended no 1 0 0
5 UPD 3344 Ended no 1 0 0
6 ENQ 2848 Ended no 1 0 0
7 BTC 3056 Ended no 1 0 0
8 BTC 3308 Ended no 1 0 0
9 BTC 596 Ended no 1 0 0
10 SPO 1988 Ended no 1 0 0
11 UP2 2136 Ended no 1 0 0
Dispatcher Queue Statistics Wed Dec 05 11:04:53 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
5
2000
11
11
--------++++--
+
DIA
3
3
2000
5
2
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 17
wake_evt_udp_now 0
wake events total 13, udp 6 ( 46%), shm 7 ( 53%)
since last update total 13, udp 6 ( 46%), shm 7 ( 53%)
Dump of tm_adm structure: Wed Dec 05 11:04:53 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
EX-T12, U13, , 158.155.25.171, 11:04:07, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Wed Dec 05 11:04:53 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:04:58 2007
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >ibwoksapq02_Q02_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3968) (SOFT_KILL)
Stop icman
killing process (196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3968 HANDLE:1540)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:04:59 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3968 HANDLE:1540)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:00 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:01 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:02 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:03 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:04 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:05 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:06 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:07 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:08 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:196 HANDLE:1548)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 11:05:09 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:196 HANDLE:1548)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >ibwoksapq02_Q02_00 <)
NiIMyHostName: hostname = 'ibwoksapq02'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 1476 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Wed Dec 05 11:05:10 2007
NiIPeek: peek for hdl 3 / socket 1476 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10403]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 23)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1476
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2896) [dpxxdisp.c 8776]
Good Bye .....
<b></b>
<b>dev_w0</b>
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Dec 05 11:04:03 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\Q02\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\Q02\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\Q02\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.195)
B New connection 0 created
M sysno 00
M sid Q02
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 196
M intno 20020600
M make: multithreaded, Unicode
M pid 1368
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1368) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 15840 (1320)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08110040, size: 3386992)
M DpShMCreate: allocated sys_adm at 08110040
M DpShMCreate: allocated wp_adm at 08111B88
M DpShMCreate: allocated tm_adm_list at 08115968
M DpShMCreate: allocated tm_adm at 08115990
M DpShMCreate: allocated wp_ca_adm at 083EA7E8
M DpShMCreate: allocated appc_ca_adm at 083F05A8
M DpShMCreate: allocated comm_adm_list at 083F24E8
M DpShMCreate: allocated comm_adm at 083F2500
M DpShMCreate: allocated vmc_adm_list at 084391D0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 084391F8
M DpShMCreate: allocated wall_adm at 08439200
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X
X Wed Dec 05 11:04:04 2007
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M calling db_connect ...
C Thread ID:2236
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\Q02\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 195
C patchcomment DBCON: database names must not start with digits (1078650)
C np:(local) connection used on IBWOKSAPQ02
C CopyLocalParameters: dbuser is 'q02'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Wed Dec 05 11:04:05 2007
C Provider Release:08.10.3959
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Cache sizes: header 68 bytes, 20000 names (31680000 bytes), 1000 dynamic statements (5696000 bytes), total 37376068 bytes
C Using shared procedure name cache IBWOKSAPQ02_Q02Q02_Q02_MEM initialized by another process.
C Connected to db server : [IBWOKSAPQ02] server_used : [np:(local)], dbname: Q02, dbuser: q02
C pn_id:IBWOKSAPQ02_Q02Q02_Q02
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20071205 110404 IBWOKSAPQ02
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Dec 05 11:04:10 2007
I *** ERROR => OpenProcess PID 3272 failed for checking semaphore 4
ERROR_INVALID_PARAMETER: The parameter is incorrect. [semnt.c 1939]
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0C8B0040, size: 4400128)
M SHM_ROLL_AREA (addr: 2FA50040, size: 161480704)
M SHM_PAGING_AREA (addr: 10500040, size: 73400320)
M SHM_ROLL_ADM (addr: 0CCF0040, size: 1612020)
M SHM_PAGING_ADM (addr: 0CE80040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CF10040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CFA0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C The IRow interface is supported by this OLEDB provider
B db_con_shm_ini: WP_ID = 0, WP_CNT = 12, CON_ID = -1
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
B dbtbxbuf: Buffer TABL (addr: 161000C8, size: 30000128, end: 17D9C4C8)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14291712
B ***LOG BB0=> buffer TABL started with length 30000128 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Buffer TABLP (addr: 17DA00C8, size: 10240000, end: 187640C8)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5044992
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 12 * 20 = 240
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 187700D0, size: 4194304, end: 18B700D0)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 12 * 20 = 240
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 18B800D0, size: 4194304, end: 18F800D0)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 12 * 20 = 240
B 3: 3001 * 48 = 144048
B 4: 1500 * 232 = 348000
B 5: 3001 * 4 = 12004
B 6: 1 * 200 = 200
B 7: 193 * 4 = 772
B 8: 5012 * 512 = 2566144
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 18F900D0, size: 3072000, end: 1927E0D0)
B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 12 * 20 = 240
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 81 * 4 = 324
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 192800D0, size: 4194304, end: 196800D0)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#5 @ 2274] [dbcalbuf2274 ]
M call semaphore clean-up function ...
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 462]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1368)
When : 12/5/2007 11:4:11.366
Threads : 2
Computer Name : IBWOKSAPQ02
User Name : SAPServiceQ02
Number of Processors: 4
Processor Type: x86 Family 15 Model 2 Stepping 5
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 8bc
eax=00262802 ebx=00000002 ecx=0596b003 edx=00003d43 esi=00004200 edi=00004200
eip=00bbaf10 esp=0526fa88 ebp=0526fa94 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010202
function : get_nec_length
00bbaef8 7403 jz get_nec_length+0x17b (00bbaefd)
00bbaefa c60100 mov byte ptr [ecx],0x0 ds:0596b003=??
00bbaefd 83c120 add ecx,0x20
00bbaf00 4a dec edx
00bbaf01 75f2 jnz get_dbtab_columns+0x87 (00bbaff5)
00bbaf03 eb19 jmp get_nec_length+0x19c (00bbaf1e)
00bbaf05 6685ff test di,di
00bbaf08 7e14 jle get_nec_length+0x19c (00bbaf1e)
00bbaf0a 83c103 add ecx,0x3
00bbaf0d 0fb7d7 movzx edx,di
FAULT-> 00bbaf10 803900 cmp byte ptr [ecx],0x0 ds:0596b003=??
00bbaf13 7403 jz get_nec_length+0x196 (00bbaf18)
00bbaf15 ff45fc inc dword ptr [ebp+0xfc] ss:0a4dd51a=????????
00bbaf18 83c120 add ecx,0x20
00bbaf1b 4a dec edx
00bbaf1c 75f2 jnz get_dbtab_columns+0xa2 (00bbb010)
00bbaf1e 5f pop edi
00bbaf1f 8b0dccfcc901 mov ecx,[FDESCR2_SIZE (01c9fccc)] ds:01c9fccc=0000017c
00bbaf25 0fbf55fc movsx edx,word ptr [ebp+0xfc] ss:0a4dd51b=????
00bbaf29 83c102 add ecx,0x2
00bbaf2c 0fafca imul ecx,edx
00bbaf2f 8d440102 lea eax,[ecxeax0x2] ds:054d0289=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0526fa94 00bbefb1 00000287 0526fb24 00000000 0d064200 disp+work!get_nec_length [dbntab.c (12438)]
0526faf4 00bc2ec5 0526fb80 0526fb24 0526fb20 00000000 disp+work!ftab_select [dbntab.c (10343)]
0526fb44 00bc390e 00000000 0526fb80 00000000 01c9fcbc disp+work!fetch_entry [dbntab.c (7186)]
0526fb5c 00bc4274 00000000 0526fb80 01d577ec 01d57760 disp+work!procure_2 [dbntab.c (6855)]
0526fbb8 00c921a9 00000002 0526fc30 0526fc44 00000000 disp+work!db_ntab [dbntab.c (3104)]
0526fc4c 00c950a2 0fe300c8 0fe30040 00000000 00310030 disp+work!read_ntab [dbcalbuf.c (3177)]
0526fd40 00c95805 00000000 00000000 0fe30040 00660075 disp+work!db_cbufload [dbcalbuf.c (4507)]
0526fd68 00c97937 01d58d0c 00000008 0fe30040 0526fd90 disp+work!reset_handling [dbcalbuf.c (2676)]
0526fdac 00c97ab8 00000000 7c355852 00000000 00000005 disp+work!init_shm_and_load_cals [dbcalbuf.c (2278)]
0526fdd8 00c5904d 0526fdf4 05b30dcc 00000000 0000000a disp+work!db_cbufinst [dbcalbuf.c (1599)]
0526fe08 00ca8ed0 057c7200 057c7178 00000090 057c717c disp+work!db_calinit [dbbmng0.c (2786)]
0526fe1c 0045790a 00000011 00000004 00000000 00000000 disp+work!db_init [dblink.c (2213)]
0526fe3c 00488e83 00000011 00000000 024987e0 00000000 disp+work!ThCallHooks [thxxtool3.c (246)]
0526fe58 004980ff 00000000 00000002 0526ff04 00000000 disp+work!ThIPCInit [thxxhead.c (1914)]
0526fee8 0049c594 00000001 05425fd0 00000000 00000000 disp+work!tskh_init [thxxhead.c (1356)]
0526ff04 004233fb 00000000 7ffd8000 0526ff60 00401085 disp+work!tskhstart [thxxhead.c (1017)]
0526ff14 00401085 00000003 05425fd0 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1011)]
0526ff60 0111cebb 00000003 05425fd0 05426888 017d9000 disp+work!nlsui_main [thxxanf.c (85)]
0526ffc0 77e6f23b 00000000 00000000 7ffd8000 00000000 disp+work!wmainCRTStartup [crtexe.c (395)]
0526fff0 00000000 0111cd78 00000000 00905a4d 00000003 kernel32!ProcessIdToSessionId
Stack Dump for Thread Id 838
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00410000 esi=00000000 edi=00000000
eip=7c8285ec esp=078ffeb0 ebp=078ffef4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:078ffeb0=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:0cb6d937=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
078ffef4 01076a50 000006a0 00000000 00000000 0542b0d0 ntdll!KiFastSystemCallRet
078fff84 7c349565 00000000 00000000 00000000 0542b038 disp+work!SigIMsgFunc [signt.c (632)]
078fffb8 77e64829 0542b038 00000000 00000000 0542b038 MSVCR71!endthreadex
078fffec 00000000 7c3494f6 0542b038 00000000 00000000 kernel32!GetModuleHandleA
M -
M
M Wed Dec 05 11:04:11 2007
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ibwoksapq02_Q02_00 on host ibwoksapq02 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Wed Dec 05 11:04:11 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 9806
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M ThIErrHandle: call ThrCoreInfo
A RABAX in run level 0
A RABAX in unkown environment: task_type=0, run level=0, rabax state=80000000 ztta_task_type=0
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1368)
When : 12/5/2007 11:4:11.476
Threads : 2
Computer Name : IBWOKSAPQ02
User Name : SAPServiceQ02
Number of Processors: 4
Processor Type: x86 Family 15 Model 2 Stepping 5
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 8bc
eax=00262802 ebx=00000002 ecx=0596b003 edx=00003d43 esi=00004200 edi=00004200
eip=00bbaf10 esp=0526fa88 ebp=0526fa94 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010202
function : get_nec_length
00bbaef8 7403 jz get_nec_length+0x17b (00bbaefd)
00bbaefa c60100 mov byte ptr [ecx],0x0 ds:0596b003=??
00bbaefd 83c120 add ecx,0x20
00bbaf00 4a dec edx
00bbaf01 75f2 jnz get_dbtab_columns+0x87 (00bbaff5)
00bbaf03 eb19 jmp get_nec_length+0x19c (00bbaf1e)
00bbaf05 6685ff test di,di
00bbaf08 7e14 jle get_nec_length+0x19c (00bbaf1e)
00bbaf0a 83c103 add ecx,0x3
00bbaf0d 0fb7d7 movzx edx,di
FAULT-> 00bbaf10 803900 cmp byte ptr [ecx],0x0 ds:0596b003=??
00bbaf13 7403 jz get_nec_length+0x196 (00bbaf18)
00bbaf15 ff45fc inc dword ptr [ebp+0xfc] ss:0a4da78e=????????
00bbaf18 83c120 add ecx,0x20
00bbaf1b 4a dec edx
00bbaf1c 75f2 jnz get_dbtab_columns+0xa2 (00bbb010)
00bbaf1e 5f pop edi
00bbaf1f 8b0dccfcc901 mov ecx,[FDESCR2_SIZE (01c9fccc)] ds:01c9fccc=0000017c
00bbaf25 0fbf55fc movsx edx,word ptr [ebp+0xfc] ss:0a4da78f=????
00bbaf29 83c102 add ecx,0x2
00bbaf2c 0fafca imul ecx,edx
00bbaf2f 8d440102 lea eax,[ecxeax0x2] ds:054cd4fd=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0526fa94 00bbefb1 00000287 0526fb24 00000000 0d064200 disp+work!get_nec_length [dbntab.c (12438)]
0526faf4 00bc2ec5 0526fb80 0526fb24 0526fb20 00000000 disp+work!ftab_select [dbntab.c (10343)]
0526fb44 00bc390e 00000000 0526fb80 00000000 01c9fcbc disp+work!fetch_entry [dbntab.c (7186)]
0526fb5c 00bc4274 00000000 0526fb80 01d577ec 01d57760 disp+work!procure_2 [dbntab.c (6855)]
0526fbb8 00c921a9 00000002 0526fc30 0526fc44 00000000 disp+work!db_ntab [dbntab.c (3104)]
0526fc4c 00c950a2 0fe300c8 0fe30040 00000000 00310030 disp+work!read_ntab [dbcalbuf.c (3177)]
0526fd40 00c95805 00000000 00000000 0fe30040 00660075 disp+work!db_cbufload [dbcalbuf.c (4507)]
0526fd68 00c97937 01d58d0c 00000008 0fe30040 0526fd90 disp+work!reset_handling [dbcalbuf.c (2676)]
0526fdac 00c97ab8 00000000 7c355852 00000000 00000005 disp+work!init_shm_and_load_cals [dbcalbuf.c (2278)]
0526fdd8 00c5904d 0526fdf4 05b30dcc 00000000 0000000a disp+work!db_cbufinst [dbcalbuf.c (1599)]
0526fe08 00ca8ed0 057c7200 057c7178 00000090 057c717c disp+work!db_calinit [dbbmng0.c (2786)]
0526fe1c 0045790a 00000011 00000004 00000000 00000000 disp+work!db_init [dblink.c (2213)]
0526fe3c 00488e83 00000011 00000000 024987e0 00000000 disp+work!ThCallHooks [thxxtool3.c (246)]
0526fe58 004980ff 00000000 00000002 0526ff04 00000000 disp+work!ThIPCInit [thxxhead.c (1914)]
0526fee8 0049c594 00000001 05425fd0 00000000 00000000 disp+work!tskh_init [thxxhead.c (1356)]
0526ff04 004233fb 00000000 7ffd8000 0526ff60 00401085 disp+work!tskhstart [thxxhead.c (1017)]
0526ff14 00401085 00000003 05425fd0 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1011)]
0526ff60 0111cebb 00000003 05425fd0 05426888 017d9000 disp+work!nlsui_main [thxxanf.c (85)]
0526ffc0 77e6f23b 00000000 00000000 7ffd8000 00000000 disp+work!wmainCRTStartup [crtexe.c (395)]
0526fff0 00000000 0111cd78 00000000 00905a4d 00000003 kernel32!ProcessIdToSessionId
Stack Dump for Thread Id 838
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00410000 esi=00000000 edi=00000000
eip=7c8285ec esp=078ffeb0 ebp=078ffef4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:078ffeb0=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:0cb6abab=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
078ffef4 01076a50 000006a0 00000000 00000000 0542b0d0 ntdll!KiFastSystemCallRet
078fff84 7c349565 00000000 00000000 00000000 0542b038 disp+work!SigIMsgFunc [signt.c (632)]
078fffb8 77e64829 0542b038 00000000 00000000 0542b038 MSVCR71!endthreadex
078fffec 00000000 7c3494f6 0542b038 00000000 00000000 kernel32!GetModuleHandleA
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) 00000000 (admCheck)00000000 [mmxx.c 2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 048810F0/00000000/0/0/1
M RmCleanUpResources3: no resources registered
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15138]
M in_ThErrHandle: 2
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 2) [thxxhead.c 9621]
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c 9642]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1368)
When : 12/5/2007 11:4:11.507
Threads : 2
Computer Name : IBWOKSAPQ02
User Name : SAPServiceQ02
Number of Processors: 4
Processor Type: x86 Family 15 Model 2 Stepping 5
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 8bc
eax=00262802 ebx=00000002 ecx=0596b003 edx=00003d43 esi=00004200 edi=00004200
eip=00bbaf10 esp=0526fa88 ebp=0526fa94 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010202
function : get_nec_length
00bbaef8 7403 jz get_nec_length+0x17b (00bbaefd)
00bbaefa c60100 mov byte ptr [ecx],0x0 ds:0596b003=30
00bbaefd 83c120 add ecx,0x20
00bbaf00 4a dec edx
00bbaf01 75f2 jnz get_dbtab_columns+0x87 (00bbaff5)
00bbaf03 eb19 jmp get_nec_length+0x19c (00bbaf1e)
00bbaf05 6685ff test di,di
00bbaf08 7e14 jle get_nec_length+0x19c (00bbaf1e)
00bbaf0a 83c103 add ecx,0x3
00bbaf0d 0fb7d7 movzx edx,di
FAULT-> 00bbaf10 803900 cmp byte ptr [ecx],0x0 ds:0596b003=30
00bbaf13 7403 jz get_nec_length+0x196 (00bbaf18)
00bbaf15 ff45fc inc dword ptr [ebp+0xfc] ss:0a4d9f06=????????
00bbaf18 83c120 add ecx,0x20
00bbaf1b 4a dec edx
00bbaf1c 75f2 jnz get_dbtab_columns+0xa2 (00bbb010)
00bbaf1e 5f pop edi
00bbaf1f 8b0dccfcc901 mov ecx,[FDESCR2_SIZE (01c9fccc)] ds:01c9fccc=0000017c
00bbaf25 0fbf55fc movsx edx,word ptr [ebp+0xfc] ss:0a4d9f07=????
00bbaf29 83c102 add ecx,0x2
00bbaf2c 0fafca imul ecx,edx
00bbaf2f 8d440102 lea eax,[ecxeax0x2] ds:054ccc75=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0526fa94 00bbefb1 00000287 0526fb24 00000000 0d064200 disp+work!get_nec_length [dbntab.c (12438)]
0526faf4 00bc2ec5 0526fb80 0526fb24 0526fb20 00000000 disp+work!ftab_select [dbntab.c (10343)]
0526fb44 00bc390e 00000000 0526fb80 00000000 01c9fcbc disp+work!fetch_entry [dbntab.c (7186)]
0526fb5c 00bc4274 00000000 0526fb80 01d577ec 01d57760 disp+work!procure_2 [dbntab.c (6855)]
0526fbb8 00c921a9 00000002 0526fc30 0526fc44 00000000 disp+work!db_ntab [dbntab.c (3104)]
0526fc4c 00c950a2 0fe300c8 0fe30040 00000000 00310030 disp+work!read_ntab [dbcalbuf.c (3177)]
0526fd40 00c95805 00000000 00000000 0fe30040 00660075 disp+wor
Hi Guenther,
I've managed to bring up the SAP now after changing some parameters
in the instance profile that are pointing to D:\. It's now up and
running, but the dispatcher is in yellow colour. The status
is "Running, Message Server connection ok, Dialog Queue time: 0.00 sec,
J2EE status info unavailable". I did not select Java during the
installation. Only ABAP was selected.
I am able to login to the R/3 system now. I notice that there are some
parameters in the instance profile are related to the Java like
rdisp/j2ee_start, login/accept_sso2_ticket and etc. Is it possible that
database backup that I used to restore was from a ABAP + JAVA system?
Please see below for the dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Fri Dec 07 03:53:19 2007
kernel runs with dp version 136(ext=102) (@(#) DPLIB-INT-VERSION-136)
length of sys_adm_ext is 312 bytes
sysno 00
sid Q02
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 211
intno 20020600
make: multithreaded, ASCII
pid 3836
***LOG Q00=> DpSapEnvInit, DPStart (00 3836) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 211 successfully loaded
shared lib "dw_xtc.dll" version 211 successfully loaded
shared lib "dw_stl.dll" version 211 successfully loaded
shared lib "dw_gui.dll" version 211 successfully loaded
shared lib "dw_mdm.dll" version 211 successfully loaded
Fri Dec 07 03:53:23 2007
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >ibwoksapq02_Q02_00 <
DpShMCreate: sizeof(wp_adm) 11648 (832)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06340040, size: 2670480)
DpShMCreate: allocated sys_adm at 06340040
DpShMCreate: allocated wp_adm at 063417D8
DpShMCreate: allocated tm_adm_list at 06344558
DpShMCreate: allocated tm_adm at 06344580
DpShMCreate: allocated wp_ca_adm at 065895C0
DpShMCreate: allocated appc_ca_adm at 0658DC10
DpShMCreate: allocated comm_adm_list at 0658F380
DpShMCreate: allocated comm_adm at 0658F398
DpShMCreate: allocated vmc_adm_list at 065BE198
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 065BE1C0
DpShMCreate: allocated wall_adm at 065BE1C8
MBUF state OFF
Fri Dec 07 03:53:24 2007
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1299 blocks reserved for free list.
ES initialized.
ERROR => DpForkExec: CreateProcess (3: No such process) [dpntdisp.c 1486]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 3) [dpntdisp.c 1488]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 4190208 K
Config. maximum size : 4190208 K
Avail. maximum size : 4190208 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
NT Task Manager Informations
Total Handles : 12859
Total Threads : 703
Total Processes : 54
Commit Charge Total : 1974636 K
Commit Charge Limit : 6137308 K
Commit Charge Peak : 1975500 K
Phys.Memory Total : 2096524 K
Phys.Memory Available : 1449380 K
File Cache : 116072 K
Kernel Memory Total : 104040 K
Kernel Memory Paged : 91112 K
Kernel Memory Nonpaged : 12928 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 895036 K
Private Pages : 0 K
Total heap size : 12826 K
Virtual memory regions : 0 K
Uncommitted heap memory : 7632 K
Allocated heap memory : 5028 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
212 K
2068 K
0 K
0 K
128
280
smss.exe
452 K
468 K
164 K
164 K
0
352
winlogon.exe
9848 K
9920 K
6608 K
6616 K
2
400
services.exe
3844 K
3852 K
1712 K
1736 K
1
412
lsass.exe
9664 K
9724 K
9040 K
9156 K
2
636
svchost.exe
2692 K
2692 K
900 K
900 K
0
816
svchost.exe
22124 K
22364 K
16068 K
20016 K
13
968
spoolsv.exe
4708 K
4800 K
3608 K
3796 K
1
1112
svchost.exe
2116 K
2116 K
568 K
568 K
0
1196
inetinfo.exe
8520 K
10552 K
3396 K
5408 K
3
1220
Srvany.exe
1412 K
1424 K
300 K
316 K
0
1244
lmwu.exe
2464 K
2472 K
724 K
748 K
0
1252
sqlservr.exe
119352 K
119352 K
93168 K
93204 K
29
1312
ntrtscan.exe
4012 K
55404 K
2536 K
53960 K
16
1688
sapstartsrv.exe
21016 K
21016 K
22168 K
22168 K
5
1752
tmlisten.exe
7368 K
8080 K
4028 K
5052 K
4
1844
OfcPfwSvc.exe
5000 K
5508 K
3828 K
4344 K
2
1888
svchost.exe
7568 K
9404 K
5036 K
6952 K
3
2272
svchost.exe
4464 K
4516 K
2472 K
22888 K
1
2296
svchost.exe
3880 K
3880 K
2932 K
2932 K
1
2308
UQ8188.EXE
2684 K
2748 K
1152 K
1256 K
1
2860
winlogon.exe
3320 K
9008 K
5136 K
7604 K
10
3148
userinit.exe
2984 K
2984 K
1980 K
1980 K
0
3156
rdpclip.exe
2916 K
2916 K
924 K
972 K
0
3224
userinit.exe
2116 K
2184 K
608 K
628 K
0
3244
ctfmon.exe
2752 K
3016 K
504 K
844 K
0
3256
Explorer.EXE
11508 K
11540 K
7104 K
7136 K
4
3328
pccntmon.exe
4572 K
4572 K
2436 K
2444 K
1
3336
jusched.exe
2428 K
2428 K
564 K
564 K
0
3380
jucheck.exe
5492 K
5492 K
2648 K
2648 K
1
3396
sqlmangr.exe
4968 K
6720 K
1384 K
2752 K
2
3464
mmc.exe
18596 K
18720 K
18648 K
19016 K
5
3528
wuauclt.exe
3548 K
3548 K
1972 K
1972 K
0
3756
sqlagent.exe
968 K
6372 K
2336 K
2472 K
2
3812
msg_server.exe
[MS] Q02_00
7584 K
7584 K
8408 K
8408 K
1
3836
disp+work.exe
30856 K
30920 K
49372 K
49476 K
7
3844
igswd.exe
[**] Q02_00
2508 K
2792 K
1424 K
1752 K
0
3864
igsmux.exe
13324 K
13324 K
12844 K
12844 K
3
3948
igspw.exe
12260 K
12260 K
11744 K
11744 K
3
3956
igspw.exe
12260 K
12260 K
11744 K
11744 K
3
192
gwrd.EXE
[GW] Q02_00
47908 K
47908 K
8392 K
10832 K
11
216
icman.EXE
69316 K
69316 K
72008 K
72008 K
17
Sum
505584 K
402588 K
DpJ2eeStart: j2ee state = INIT
ERROR => DpProcCreate: DpJ2eeStart failed [dpxxdisp.c 10768]
Fri Dec 07 03:53:25 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( ibwoksapq02) [dpxxdisp.c 10113]
DpStartStopMsg: send start message (myname is >ibwoksapq02_Q02_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 211
Release check o.K.
Fri Dec 07 03:53:32 2007
MBUF state ACTIVE
Fri Dec 07 03:53:33 2007
DpModState: change server state from STARTING to ACTIVE
Fri Dec 07 03:54:05 2007
ERROR => DpForkExec: CreateProcess (3: No such process) [dpntdisp.c 1486]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 3) [dpntdisp.c 1488]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 4190208 K
Config. maximum size : 4190208 K
Avail. maximum size : 4190208 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
NT Task Manager Informations
Total Handles : 16946
Total Threads : 786
Total Processes : 67
Commit Charge Total : 3976044 K
Commit Charge Limit : 6137308 K
Commit Charge Peak : 3982420 K
Phys.Memory Total : 2096524 K
Phys.Memory Available : 527080 K
File Cache : 116948 K
Kernel Memory Total : 106168 K
Kernel Memory Paged : 92308 K
Kernel Memory Nonpaged : 13860 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 844964 K
Private Pages : 0 K
Total heap size : 15499 K
Virtual memory regions : 0 K
Uncommitted heap memory : 9444 K
Allocated heap memory : 5896 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
212 K
2068 K
0 K
0 K
142
280
smss.exe
452 K
468 K
164 K
164 K
0
352
winlogon.exe
9732 K
9920 K
6496 K
6616 K
2
400
services.exe
3804 K
3852 K
1616 K
1736 K
1
412
lsass.exe
9680 K
9724 K
9060 K
9156 K
2
636
svchost.exe
2692 K
2692 K
900 K
900 K
0
816
svchost.exe
22104 K
22364 K
16044 K
20016 K
13
968
spoolsv.exe
4708 K
4800 K
3608 K
3796 K
1
1112
svchost.exe
2116 K
2116 K
568 K
568 K
0
1196
inetinfo.exe
8552 K
10552 K
3348 K
5408 K
3
1220
Srvany.exe
1412 K
1424 K
300 K
316 K
0
1244
lmwu.exe
2464 K
2472 K
724 K
748 K
0
1252
sqlservr.exe
600644 K
600660 K
573916 K
573980 K
147
1312
ntrtscan.exe
4016 K
55404 K
2540 K
53960 K
16
1688
sapstartsrv.exe
21032 K
21104 K
22152 K
22168 K
7
1752
tmlisten.exe
7360 K
8080 K
4016 K
5052 K
4
1844
OfcPfwSvc.exe
5000 K
5508 K
3828 K
4344 K
2
1888
svchost.exe
7568 K
9404 K
5036 K
6952 K
3
2272
svchost.exe
4472 K
4516 K
2496 K
22888 K
1
2296
svchost.exe
3896 K
3896 K
2960 K
2960 K
1
2308
UQ8188.EXE
2684 K
2748 K
1152 K
1256 K
1
2860
winlogon.exe
3344 K
9008 K
5104 K
7604 K
11
3156
rdpclip.exe
2916 K
2916 K
924 K
972 K
0
3244
ctfmon.exe
2752 K
3016 K
504 K
844 K
0
3256
Explorer.EXE
11604 K
11656 K
6876 K
7136 K
4
3328
pccntmon.exe
4572 K
4572 K
2436 K
2444 K
1
3336
jusched.exe
2428 K
2428 K
564 K
564 K
0
3380
jucheck.exe
5492 K
5492 K
2648 K
2648 K
1
3396
sqlmangr.exe
4968 K
6720 K
1384 K
2752 K
2
3464
mmc.exe
18724 K
18732 K
18196 K
19016 K
5
3528
wuauclt.exe
3548 K
3548 K
1972 K
1972 K
0
3756
sqlagent.exe
2536 K
6372 K
2572 K
2572 K
2
3812
msg_server.exe
[MS] Q02_00
9548 K
9548 K
10348 K
10348 K
2
3836
disp+work.exe
34836 K
34900 K
50296 K
50404 K
8
3844
igswd.exe
[**] Q02_00
2508 K
2792 K
1424 K
1752 K
0
3864
igsmux.exe
13420 K
13420 K
12928 K
12928 K
3
3948
igspw.exe
12344 K
12344 K
11824 K
11824 K
3
3956
igspw.exe
12344 K
12344 K
11824 K
11824 K
3
192
gwrd.EXE
[GW] Q02_00
48604 K
48604 K
8956 K
10832 K
11
216
icman.EXE
76016 K
76016 K
74136 K
75160 K
18
548
disp+work.EXE
[WP] Q02_00
42836 K
43300 K
57336 K
57336 K
10
596
disp+work.EXE
[WP] Q02_00
119748 K
158692 K
57292 K
69392 K
86
672
disp+work.EXE
[WP] Q02_00
53840 K
54116 K
54360 K
54360 K
13
744
disp+work.EXE
[WP] Q02_00
42776 K
43512 K
53408 K
53408 K
10
772
disp+work.EXE
[WP] Q02_00
41980 K
42752 K
53460 K
53460 K
10
912
disp+work.EXE
[WP] Q02_00
29264 K
29264 K
52640 K
52704 K
7
936
disp+work.EXE
[WP] Q02_00
72868 K
73608 K
53852 K
53852 K
18
940
disp+work.EXE
[WP] Q02_00
37040 K
37040 K
53340 K
53404 K
9
1412
disp+work.EXE
[WP] Q02_00
26172 K
26172 K
51888 K
51952 K
6
1624
disp+work.EXE
[WP] Q02_00
26312 K
26312 K
52116 K
52116 K
6
1788
disp+work.EXE
[WP] Q02_00
26756 K
26756 K
52424 K
52488 K
6
2104
disp+work.EXE
[WP] Q02_00
26876 K
26876 K
52480 K
52544 K
6
1748
disp+work.EXE
[WP] Q02_00
43368 K
43660 K
53868 K
53868 K
11
2260
disp+work.EXE
[WP] Q02_00
26736 K
26736 K
52424 K
52488 K
6
2836
sap_mssql_cfgck.exe
11116 K
11116 K
10920 K
10928 K
3
Sum
1624792 K
1647648 K
DpJ2eeStart: j2ee state = INIT
ERROR => DpEnvCheckJ2ee: DpJ2eeStart failed [dpxxdisp.c 6445]
Fri Dec 07 03:54:25 2007
ERROR => DpForkExec: CreateProcess (3: No such process) [dpntdisp.c 1486]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 3) [dpntdisp.c 1488]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 4190208 K
Config. maximum size : 4190208 K
Avail. maximum size : 4190208 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
NT Task Manager Informations
Total Handles : 16896
Total Threads : 785
Total Processes : 67
Commit Charge Total : 4039664 K
Commit Charge Limit : 6137308 K
Commit Charge Peak : 4039768 K
Phys.Memory Total : 2096524 K
Phys.Memory Available : 475064 K
File Cache : 117044 K
Kernel Memory Total : 106176 K
Kernel Memory Paged : 92316 K
Kernel Memory Nonpaged : 13860 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 844964 K
Private Pages : 0 K
Total heap size : 15499 K
Virtual memory regions : 0 K
Uncommitted heap memory : 9444 K
Allocated heap memory : 5896 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
212 K
2068 K
0 K
0 K
143
280
smss.exe
452 K
468 K
164 K
164 K
0
352
winlogon.exe
9744 K
9920 K
6528 K
6616 K
2
400
services.exe
3804 K
3852 K
1616 K
1736 K
1
412
lsass.exe
9680 K
9724 K
9060 K
9156 K
2
636
svchost.exe
2692 K
2692 K
900 K
900 K
0
816
svchost.exe
21756 K
22364 K
15696 K
20016 K
14
968
spoolsv.exe
4708 K
4800 K
3608 K
3796 K
1
1112
svchost.exe
2116 K
2116 K
568 K
568 K
0
1196
inetinfo.exe
8552 K
10552 K
3348 K
5408 K
3
1220
Srvany.exe
1412 K
1424 K
300 K
316 K
0
1244
lmwu.exe
2464 K
2472 K
724 K
748 K
0
1252
sqlservr.exe
660820 K
660820 K
634788 K
634788 K
162
1312
ntrtscan.exe
4016 K
55404 K
2540 K
53960 K
16
1688
sapstartsrv.exe
21040 K
21104 K
22152 K
22168 K
9
1752
tmlisten.exe
7360 K
8080 K
4016 K
5052 K
4
1844
OfcPfwSvc.exe
5000 K
5508 K
3828 K
4344 K
2
1888
svchost.exe
7564 K
9404 K
5012 K
6952 K
3
2272
svchost.exe
4472 K
4516 K
2496 K
22888 K
1
2296
svchost.exe
3896 K
3896 K
2960 K
2960 K
1
2308
UQ8188.EXE
2684 K
2748 K
1152 K
1256 K
1
2860
winlogon.exe
3360 K
9008 K
5136 K
7604 K
11
3156
rdpclip.exe
2916 K
2916 K
924 K
972 K
0
3244
ctfmon.exe
2752 K
3016 K
504 K
844 K
0
3256
Explorer.EXE
11604 K
11656 K
6876 K
7136 K
4
3328
pccntmon.exe
4572 K
4572 K
2436 K
2444 K
1
3336
jusched.exe
2428 K
2428 K
564 K
564 K
0
3380
jucheck.exe
5492 K
5492 K
2648 K
2648 K
1
3396
sqlmangr.exe
4968 K
6720 K
1384 K
2752 K
2
3464
mmc.exe
18792 K
18848 K
18288 K
19016 K
5
3528
wuauclt.exe
3548 K
3548 K
1972 K
1972 K
0
3756
sqlagent.exe
2536 K
6372 K
2572 K
2572 K
2
3812
msg_server.exe
[MS] Q02_00
9548 K
9548 K
10348 K
10348 K
2
3836
disp+work.exe
34844 K
34908 K
50296 K
50404 K
8
3844
igswd.exe
[**] Q02_00
2508 K
2792 K
1424 K
1752 K
0
3864
igsmux.exe
13420 K
13420 K
12928 K
12928 K
3
3948
igspw.exe
12344 K
12344 K
11824 K
11824 K
3
3956
igspw.exe
12344 K
12344 K
11824 K
11824 K
3
192
gwrd.EXE
[GW] Q02_00
48604 K
48604 K
8956 K
10832 K
11
216
icman.EXE
76020 K
76020 K
74136 K
75160 K
18
548
disp+work.EXE
[WP] Q02_00
42924 K
43300 K
57336 K
57336 K
10
596
disp+work.EXE
[WP] Q02_00
122256 K
166712 K
60196 K
70124 K
118
672
disp+work.EXE
[WP] Q02_00
53840 K
54116 K
54360 K
54360 K
13
744
disp+work.EXE
[WP] Q02_00
42776 K
43512 K
53408 K
53408 K
10
772
disp+work.EXE
[WP] Q02_00
41980 K
42752 K
53460 K
53460 K
10
912
disp+work.EXE
[WP] Q02_00
29264 K
29264 K
52640 K
52704 K
7
936
disp+work.EXE
[WP] Q02_00
72868 K
73608 K
53852 K
53852 K
18
940
disp+work.EXE
[WP] Q02_00
37040 K
37040 K
53340 K
53404 K
9
1412
disp+work.EXE
[WP] Q02_00
26172 K
26172 K
51888 K
51952 K
6
1624
disp+work.EXE
[WP] Q02_00
26312 K
26312 K
52116 K
52116 K
6
1788
disp+work.EXE
[WP] Q02_00
26756 K
26756 K
52424 K
52488 K
6
2104
disp+work.EXE
[WP] Q02_00
26876 K
26876 K
52480 K
52544 K
6
1748
disp+work.EXE
[WP] Q02_00
43368 K
43660 K
53868 K
53868 K
11
2260
disp+work.EXE
[WP] Q02_00
26736 K
26736 K
52424 K
52488 K
6
2836
sap_mssql_cfgck.exe
11116 K
11116 K
10920 K
10928 K
3
Sum
1687328 K
1711208 K
DpJ2eeStart: j2ee state = INIT
ERROR => DpEnvCheckJ2ee: DpJ2eeStart failed [dpxxdisp.c 6445]
Fri Dec 07 03:54:45 2007
ERROR => DpForkExec: CreateProcess (3: No such process) [dpntdisp.c 1486]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 3) [dpntdisp.c 1488]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 4190208 K
Config. maximum size
Similar Messages
-
SAP failed to start after database restored to a new machine
Hi,
We have a SAp BW 3.5 running on a SQL 2000, recently our server is degraded and become unstable to host our BW server.
So we build another box with the same OS and DB version and patches, ran sapinst from the SAP DVD, upgraded the kernel to the same level as our current setup.
SAP started Ok with the kernel upgraded, however when we restored the backup to it, if fails.
I have attached the developer trace log, and hope someone can give us some help on diagnosing the issues
============================================
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jan 17 07:11:48 2008
kernel runs with dp version 130(ext=102) (@(#) DPLIB-INT-VERSION-130)
length of sys_adm_ext is 312 bytes
sysno 00
sid PBW
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 129
intno 20020600
make: multithreaded, ASCII
pid 5228
***LOG Q00=> DpSapEnvInit, DPStart (00 5228) [dpxxdisp.c 1098]
shared lib "dw_xml.dll" version 129 successfully loaded
shared lib "dw_xtc.dll" version 129 successfully loaded
shared lib "dw_stl.dll" version 129 successfully loaded
shared lib "dw_gui.dll" version 129 successfully loaded
shared lib "dw_mdm.dll" version 129 successfully loaded
Thu Jan 17 07:12:03 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0052.qqq.nxst) took 15 seconds
Thu Jan 17 07:12:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 21 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >acbwprd_PBW_00 <
DpShMCreate: sizeof(wp_adm) 24840 (828)
DpShMCreate: sizeof(tm_adm) 23691840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 30000 (60)
DpShMCreate: sizeof(appc_ca_adm) 90000 (60)
DpShMCreate: sizeof(comm_adm) 768000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (224040/329544/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06BD0040, size: 25164464)
DpShMCreate: allocated sys_adm at 06BD0040
DpShMCreate: allocated wp_adm at 06BD17D0
DpShMCreate: allocated tm_adm_list at 06BD78D8
DpShMCreate: allocated tm_adm at 06BD7900
DpShMCreate: allocated wp_ca_adm at 0826FB40
DpShMCreate: allocated appc_ca_adm at 08277070
DpShMCreate: allocated comm_adm_list at 0828D000
DpShMCreate: allocated comm_adm at 0828D018
DpShMCreate: allocated vmc_adm_list at 08348818
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08348840
DpShMCreate: allocated wall_adm at 08348848
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 2070MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 2072MB
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 517 blocks reserved for free list.
ES initialized.
ERROR => DpForkExec: CreateProcess (2: No such file or directory) [dpntdisp.c 1432]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 2) [dpntdisp.c 1434]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.0, Build 2195
Service Pack : Service Pack 4
NT Pagefile Informations
Config. minimum size : 6288384 K
Config. maximum size : 6288384 K
Avail. maximum size : 6288384 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
2095104 K
2095104 K
2095104 K
2095104 K
2
D:\pagefile.sys
4193280 K
4193280 K
4193280 K
4193280 K
NT Task Manager Informations
Total Handles : 14929
Total Threads : 849
Total Processes : 59
Commit Charge Total : 4501576 K
Commit Charge Limit : 12129696 K
Commit Charge Peak : 7082844 K
Phys.Memory Total : 6028624 K
Phys.Memory Available : 3619128 K
File Cache : 94224 K
Kernel Memory Total : 84712 K
Kernel Memory Paged : 57956 K
Kernel Memory Nonpaged : 26756 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 739448 K
Private Pages : 49272 K
Total heap size : 9481 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4424 K
Allocated heap memory : 4816 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
8
232 K
672 K
24 K
112 K
5
256
smss.exe
408 K
1992 K
1080 K
2652 K
0
308
winlogon.exe
1356 K
10644 K
7384 K
8188 K
7
336
services.exe
115548 K
218872 K
11036 K
15780 K
264040
348
lsass.exe
6960 K
7024 K
3104 K
3192 K
3
456
termsrv.exe
3772 K
3784 K
1864 K
22596 K
1
564
svchost.exe
4520 K
4584 K
1696 K
1792 K
1
596
spoolsv.exe
4580 K
4688 K
2572 K
2752 K
1
664
msdtc.exe
6180 K
6232 K
2204 K
2220 K
1
844
CpqRcmc.exe
1080 K
1084 K
268 K
272 K
0
860
vcagent.exe
6968 K
6976 K
2172 K
2348 K
1
876
svchost.exe
6512 K
6540 K
1936 K
1972 K
2
896
HS_Service.exe
1748 K
1748 K
532 K
532 K
0
920
llssrv.exe
2524 K
2524 K
796 K
796 K
0
1064
regsvc.exe
1064 K
1072 K
288 K
300 K
0
1292
MSTask.exe
3724 K
3828 K
1192 K
1320 K
1
1324
SecurePathAgent.exe
6932 K
87096 K
4360 K
85816 K
4185
1388
snmp.exe
5340 K
5340 K
2396 K
2408 K
1
1436
smhstart.exe
4124 K
4128 K
1752 K
1756 K
1
1460
WinMgmt.exe
976 K
8236 K
6116 K
6620 K
1206
1476
svchost.exe
13352 K
68136 K
9236 K
67064 K
837
1488
cpqnimgt.exe
4448 K
4456 K
1356 K
1368 K
1
1528
cqmgserv.exe
2360 K
2360 K
828 K
844 K
0
1544
cqmgstor.exe
3972 K
3980 K
1300 K
1356 K
1
1556
mssearch.exe
2844 K
7768 K
4584 K
4608 K
2
1564
hpsmhd.exe
11240 K
11240 K
7696 K
8136 K
23
1696
sysdown.exe
2636 K
2636 K
800 K
800 K
0
1712
svchost.exe
9792 K
10376 K
6872 K
8184 K
12
1796
cqmghost.exe
5848 K
5928 K
2620 K
2764 K
91
1932
rotatelogs.exe
1544 K
1544 K
460 K
460 K
0
1080
rotatelogs.exe
1516 K
1516 K
448 K
448 K
0
1980
hpsmhd.exe
17156 K
17156 K
14952 K
14952 K
24
2004
rotatelogs.exe
1544 K
1544 K
460 K
460 K
0
1440
rotatelogs.exe
1516 K
1516 K
448 K
448 K
0
3100
Explorer.EXE
10376 K
12148 K
4880 K
5440 K
93
3252
Atiptaxx.exe
3664 K
3664 K
1032 K
1044 K
0
3272
cpqteam.exe
1804 K
1804 K
384 K
384 K
0
3296
jusched.exe
2008 K
2008 K
540 K
540 K
0
3316
sqlmangr.exe
4996 K
6648 K
1328 K
2820 K
2
4184
cmd.exe
132 K
3048 K
680 K
688 K
1
5656
mmc.exe
1284 K
14852 K
5792 K
6564 K
5
4088
sapstartsrv.exe
14280 K
14280 K
14964 K
14984 K
3
3188
msg_server.exe
[MS] PBW_01
7088 K
7088 K
7864 K
13564 K
1
3092
enserver.exe
[**] PBW_01
15376 K
15384 K
53664 K
53696 K
3
1252
mmc.exe
4176 K
8816 K
5728 K
5804 K
3
4128
msg_server.exe
[MS] PBW_00
6684 K
6692 K
6640 K
6668 K
1
5228
disp+work.exe
55660 K
55700 K
49272 K
49320 K
22
4452
igswd.exe
[**] PBW_00
3828 K
4244 K
2204 K
2632 K
1
3928
igsmux.exe
13944 K
13988 K
12316 K
12360 K
3
4832
igspw.exe
13076 K
13076 K
12316 K
12316 K
3
5724
igspw.exe
13076 K
13076 K
12316 K
12316 K
3
1280
gwrd.EXE
[GW] PBW_00
50320 K
50320 K
9304 K
30796 K
12
3284
icman.EXE
14512 K
14512 K
15900 K
15900 K
3
Sum
500600 K
321956 K
Thu Jan 17 07:12:25 2008
DpJ2eeStart: j2ee state = INIT
ERROR => DpProcCreate: DpJ2eeStart failed [dpxxdisp.c 10518]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( acbwprd) [dpxxdisp.c 9915]
DpStartStopMsg: send start message (myname is >acbwprd_PBW_00 <)
DpStartStopMsg: start msg sent
Thu Jan 17 07:12:26 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 129
Release check o.K.
Thu Jan 17 07:13:05 2008
ERROR => W0 (pid 5132) died [dpxxdisp.c 12414]
ERROR => W1 (pid 4864) died [dpxxdisp.c 12414]
ERROR => W2 (pid 4424) died [dpxxdisp.c 12414]
ERROR => W3 (pid 1208) died [dpxxdisp.c 12414]
ERROR => W4 (pid 4404) died [dpxxdisp.c 12414]
ERROR => W5 (pid 4896) died [dpxxdisp.c 12414]
ERROR => W6 (pid 4764) died [dpxxdisp.c 12414]
ERROR => W7 (pid 3736) died [dpxxdisp.c 12414]
ERROR => W8 (pid 4372) died [dpxxdisp.c 12414]
ERROR => W9 (pid 3084) died [dpxxdisp.c 12414]
ERROR => W10 (pid 5148) died [dpxxdisp.c 12414]
ERROR => W11 (pid 4548) died [dpxxdisp.c 12414]
ERROR => W12 (pid 5016) died [dpxxdisp.c 12414]
ERROR => W13 (pid 4916) died [dpxxdisp.c 12414]
ERROR => W14 (pid 3280) died [dpxxdisp.c 12414]
ERROR => W15 (pid 4524) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W16 (pid 5444) died [dpxxdisp.c 12414]
ERROR => W17 (pid 5400) died [dpxxdisp.c 12414]
ERROR => W18 (pid 4196) died [dpxxdisp.c 12414]
ERROR => W19 (pid 4436) died [dpxxdisp.c 12414]
ERROR => W20 (pid 5412) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W21 (pid 5588) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W22 (pid 4676) died [dpxxdisp.c 12414]
ERROR => W23 (pid 5056) died [dpxxdisp.c 12414]
ERROR => W24 (pid 5292) died [dpxxdisp.c 12414]
ERROR => W25 (pid 3908) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W26 (pid 4532) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W27 (pid 5100) died [dpxxdisp.c 12414]
ERROR => W28 (pid 1204) died [dpxxdisp.c 12414]
ERROR => W29 (pid 4288) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5132 (SIGUSR2)
ERROR => DpWpKill(5132, SIGUSR2) failed [dpxxtool.c 2502]
killing W1-4864 (SIGUSR2)
ERROR => DpWpKill(4864, SIGUSR2) failed [dpxxtool.c 2502]
killing W2-4424 (SIGUSR2)
ERROR => DpWpKill(4424, SIGUSR2) failed [dpxxtool.c 2502]
killing W3-1208 (SIGUSR2)
ERROR => DpWpKill(1208, SIGUSR2) failed [dpxxtool.c 2502]
killing W4-4404 (SIGUSR2)
ERROR => DpWpKill(4404, SIGUSR2) failed [dpxxtool.c 2502]
killing W5-4896 (SIGUSR2)
ERROR => DpWpKill(4896, SIGUSR2) failed [dpxxtool.c 2502]
killing W6-4764 (SIGUSR2)
ERROR => DpWpKill(4764, SIGUSR2) failed [dpxxtool.c 2502]
killing W7-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2502]
killing W8-4372 (SIGUSR2)
ERROR => DpWpKill(4372, SIGUSR2) failed [dpxxtool.c 2502]
killing W9-3084 (SIGUSR2)
ERROR => DpWpKill(3084, SIGUSR2) failed [dpxxtool.c 2502]
killing W10-5148 (SIGUSR2)
ERROR => DpWpKill(5148, SIGUSR2) failed [dpxxtool.c 2502]
killing W11-4548 (SIGUSR2)
ERROR => DpWpKill(4548, SIGUSR2) failed [dpxxtool.c 2502]
killing W12-5016 (SIGUSR2)
ERROR => DpWpKill(5016, SIGUSR2) failed [dpxxtool.c 2502]
killing W13-4916 (SIGUSR2)
ERROR => DpWpKill(4916, SIGUSR2) failed [dpxxtool.c 2502]
killing W14-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2502]
killing W15-4524 (SIGUSR2)
ERROR => DpWpKill(4524, SIGUSR2) failed [dpxxtool.c 2502]
killing W16-5444 (SIGUSR2)
ERROR => DpWpKill(5444, SIGUSR2) failed [dpxxtool.c 2502]
killing W17-5400 (SIGUSR2)
ERROR => DpWpKill(5400, SIGUSR2) failed [dpxxtool.c 2502]
killing W18-4196 (SIGUSR2)
ERROR => DpWpKill(4196, SIGUSR2) failed [dpxxtool.c 2502]
killing W19-4436 (SIGUSR2)
ERROR => DpWpKill(4436, SIGUSR2) failed [dpxxtool.c 2502]
killing W20-5412 (SIGUSR2)
ERROR => DpWpKill(5412, SIGUSR2) failed [dpxxtool.c 2502]
killing W21-5588 (SIGUSR2)
ERROR => DpWpKill(5588, SIGUSR2) failed [dpxxtool.c 2502]
killing W22-4676 (SIGUSR2)
ERROR => DpWpKill(4676, SIGUSR2) failed [dpxxtool.c 2502]
killing W23-5056 (SIGUSR2)
ERROR => DpWpKill(5056, SIGUSR2) failed [dpxxtool.c 2502]
killing W24-5292 (SIGUSR2)
ERROR => DpWpKill(5292, SIGUSR2) failed [dpxxtool.c 2502]
killing W25-3908 (SIGUSR2)
ERROR => DpWpKill(3908, SIGUSR2) failed [dpxxtool.c 2502]
killing W26-4532 (SIGUSR2)
ERROR => DpWpKill(4532, SIGUSR2) failed [dpxxtool.c 2502]
killing W27-5100 (SIGUSR2)
ERROR => DpWpKill(5100, SIGUSR2) failed [dpxxtool.c 2502]
killing W28-1204 (SIGUSR2)
ERROR => DpWpKill(1204, SIGUSR2) failed [dpxxtool.c 2502]
killing W29-4288 (SIGUSR2)
ERROR => DpWpKill(4288, SIGUSR2) failed [dpxxtool.c 2502]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:15 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Wed Jan 16 18:13:15 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5132 Ended no 1 0 0
1 DIA 4864 Ended no 1 0 0
2 DIA 4424 Ended no 1 0 0
3 DIA 1208 Ended no 1 0 0
4 DIA 4404 Ended no 1 0 0
5 DIA 4896 Ended no 1 0 0
6 DIA 4764 Ended no 1 0 0
7 DIA 3736 Ended no 1 0 0
8 DIA 4372 Ended no 1 0 0
9 DIA 3084 Ended no 1 0 0
10 DIA 5148 Ended no 1 0 0
11 DIA 4548 Ended no 1 0 0
12 DIA 5016 Ended no 1 0 0
13 DIA 4916 Ended no 1 0 0
14 DIA 3280 Ended no 1 0 0
15 DIA 4524 Ended no 1 0 0
16 UPD 5444 Ended no 1 0 0
17 UPD 5400 Ended no 1 0 0
18 UPD 4196 Ended no 1 0 0
19 UPD 4436 Ended no 1 0 0
20 UPD 5412 Ended no 1 0 0
21 ENQ 5588 Ended no 1 0 0
22 BTC 4676 Ended no 1 0 0
23 BTC 5056 Ended no 1 0 0
24 BTC 5292 Ended no 1 0 0
25 BTC 3908 Ended no 1 0 0
26 SPO 4532 Ended no 1 0 0
27 UP2 5100 Ended no 1 0 0
28 UP2 1204 Ended no 1 0 0
29 UP2 4288 Ended no 1 0 0
Dispatcher Queue Statistics Wed Jan 16 18:13:15 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Jan 16 18:13:15 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Jan 16 18:13:15 2008
=============================
Slots: 500, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:20 2008
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >acbwprd_PBW_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1280) (SOFT_KILL)
Stop icman
killing process (3284) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:1280 HANDLE:316)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:21 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1280 HANDLE:316)
[DpProcDied] Process lives (PID:3284 HANDLE:312)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:22 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3284 HANDLE:312)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:23 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3284 HANDLE:312)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >acbwprd_PBW_00 <)
NiIMyHostName: hostname = 'acbwprd'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 4 / socket 1092 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek successful for hdl 4 / socket 1092 (r)
NiIRead: read 114, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Thu Jan 17 07:13:24 2008
NiIPeek: peek for hdl 4 / socket 1092 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10153]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 4 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/500/30
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 18)
MBUF component DOWN
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 1092
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 5228) [dpxxdisp.c 8643]
Good Bye .....
============================================
Thanks
Kevin ChanThanks for your reply
Here are the DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Jan 17 07:12:27 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.126)
B New connection 0 created
M sysno 00
M sid PBW
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 129
M intno 20020600
M make: multithreaded, ASCII
M pid 5132
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5132) [dpxxdisp.c 1158]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 24840 (828)
M DpShMCreate: sizeof(tm_adm) 23691840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 30000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 90000 (60)
M DpShMCreate: sizeof(comm_adm) 768000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (224040/329544/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06BD0040, size: 25164464)
M DpShMCreate: allocated sys_adm at 06BD0040
M DpShMCreate: allocated wp_adm at 06BD17D0
M DpShMCreate: allocated tm_adm_list at 06BD78D8
M DpShMCreate: allocated tm_adm at 06BD7900
M DpShMCreate: allocated wp_ca_adm at 0826FB40
M DpShMCreate: allocated appc_ca_adm at 08277070
M DpShMCreate: allocated comm_adm_list at 0828D000
M DpShMCreate: allocated comm_adm at 0828D018
M DpShMCreate: allocated vmc_adm_list at 08348818
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 08348840
M DpShMCreate: allocated wall_adm at 08348848
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Jan 17 07:12:29 2008
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 126
C patchcomment MSSQL: Unknown table in FOR ALL ENTRIES (945910)
C np:(local) connection used on ACBWPRD
C CopyLocalParameters: dbuser is 'pbw'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#2 @ 419] [dblink 0419 ]
B ***LOG BY0=> <message text not available> [dblink#2 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1284]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9559]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server acbwprd_PBW_00 on host acbwprd (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Jan 17 07:12:29 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9735
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5132) [dpnttool.c 357] -
SCVMM Service Fails to start after SCOM Restore (with possible fix)
Hi,
Found an issue today that SCVMM 2012 SP1 Service (with rollup's) would not start. Only think I was told was that recently the SCOM Database had been dropped and re-created. We did have SCVMM connected to SCOM.
I got some errors like this on the SCVMM Server
Log Name: VM Manager
Source: Virtual Machine Manager
Date: 12/27/2013 12:45:29 PM
Event ID: 19999
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SCVMM01.domain.local
Description:
Virtual Machine Manager (vmmservice:3036) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.1.6032.0
P3(assemblyName):E.MomDal.MOMFacadeFactory
P4(assemblyVer):3.1.6011.0
P5(methodName):M.V.E.M.FacadeFactory.Create[T]
P6(exceptionType):System.NullReferenceException
P7(callstackHash):42ec
Any Ideas?I think I found the issue.
I found that because SCVMM had been tied into SCOM, it failed to start if SCOM was running with a fresh database and didn't know about SCVMM.
I got around this by
* Turning off both SCOM servers in our environment
* Starting the SCVMM Service
* Disabling the connection from SCVMM to SCOM (Remove-SCOpsMgrConnection -force in VMM Powershell)
Not sure if this is the correct way to resolve this issue but it seemed to.
Should this have been solved another way? -
Multiple Oracle Homes - Oracle Listener failes to start after installation
Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related detailshi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards -
Cluster group on node B (app1) failed to start after applied win2003 SP2
Hi,
i followed microsoft kb174799 to apply SP2 on both ms-cluster nodes namely DB/APP1. SAP-R/3 cluster group on node B (APP1) failed to start after i did step 13
Thanks & Regards,
KelvinHello,
Did you follow the procedures from note 985137 to apply the SP2
Please check procedure in this note.
985137 Service Pack Installation for SQL Server 2005
regards,
John Feely -
Oracle AS - DB Console fails to start after AS install
Hi,
I got an error message at the time of Oracle AS Infra install that setup failed to start the DB Console during DB Configuration assistant run. Also, Oracle AS - DB Console fails to start after the AS install? Any suggestion / remedies would be of help.hi,
follow this metalink note you will find out the answer
Troubleshooting Database Control Startup Issues
Doc ID: Note:549079.1
Thanks, -
ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4
I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...ColinDear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig -
My ITunes library failed to start after an upgrade, now I'm unable to open or re-install. Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system". Any help with this? I've tried un-installing and downloading only to get the same message again.
Thank you to "turingtest2", solution for someone else worked for me as well!
-
Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)
Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoithelp help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed
-
when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/ -
10g database fails to start after 3rd reboot
Hi,
I've reloaded my test server several times and loaded 10g with the default "orcl" database. Works just fine, reboot a couple times and it still works. Around the 3rd reboot the database instance fails to start. I even have to reload the OS to clear this problem. Just uninstalling Oracle and reinstalling will not clear this problem I have to reload the OS. Is there some sort of limit on the software we download from the OTN download area?
Thanks.I found in another post that suggested I needed to update my listener.ora file. I did that and the error went to telling me that oracle was unavailable. Then I found a post that suggested this:
Set oracle_sid=orcl
SQLPLUS /NOLOG
CONN SYS/????@orcl AS SYSDBA
STARTUP
EXIT
Ran this and sure enough, the database was ok but sitting idle. It went through some initialization steps and mounted so I can now launch the manager tool and have access to my database.
So, ok, this is running on VMware and that "might" be causing the problems but this is very strange since it survived three reboots then out of the blue this issue comes up. I can live with running a batch file everytime I reboot in my little test environment so I'm ok :]
Thanks for your time. -
Caldavd failing to start after upgrade to Server 3.2.1
This problem, caldavd not starting after upgrading to Server 3.2.1, is a variation on the theme of PostgresQL not starting. It too boils down to a postgres database not having been updated properly. Below are the steps needed to fix this problem:
sudo su -
# Change to the directory with the postgres database for the calendars and contacts
cd /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg
# Disable caldavd for now
launchctl unload -w /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/org.c alendarserver.calendarserver.plist
# move the broken database out of the way and build a new empty one
mv cluster.pg broken-cluster.pg
mkdir cluster.pg && chmod 700 cluster.pg && chown _calendar:_calendar cluster.pg
sudo -u _calendar /Applications/Server.app/Contents/ServerRoot/usr/bin/initdb "/Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg" -E utf8 --lc-ctype=C
# Finish the upgrade job that never completed by explicitly invoking the previous version of postgres:
sudo -u _calendar /Applications/Server.app/Contents/ServerRoot/usr/bin/pg_upgrade -b /Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2 -B /Applications/Server.app/Contents/ServerRoot/usr/bin -d /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg/cluster.pg.original_for_upgrade/ -D /Library/Server/Calendar\ and\ Contacts/Data/Database.xpg/cluster.pg
# Mark the newly upgraded database as no longer in need of an upgrade
sudo -u _calendar touch cluster.pg/.NoRestoreNeeded
# Start caldavd back up
launchctl load -w /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/org.c alendarserver.calendarserver.plist
And everything should be the way it should have been in the first place!Hi, I have the same issue and Linc Davis pointed me to this thread from Re: Server Calendar migration failed.
Your solution already got me somewhere, so thanks for that
I need to note that my machine is on Yosemite (10.10.1) and I'm running Server 4.
The only issue I have is that I get an error message when running pg_upgrade, the log says:
pg_upgrade run on Fri Jan 23 09:31:30 2015
command: "/Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2/pg_ctl" -w -l "pg_upgrade_server.log" -D "/Library/Server/Calendar and Contacts/Data/Database.xpg/b$
waiting for server to start....LOG: database system was interrupted; last known up at 2013-11-02 12:21:52 CET
LOG: creating missing WAL directory "pg_xlog/archive_status"
LOG: starting archive recovery
LOG: restored log file "000000010000000000000002" from archive
LOG: invalid magic number D075 in log file 0, segment 2, offset 0
LOG: invalid checkpoint record
FATAL: could not locate required checkpoint record
HINT: If you are not restoring from a backup, try removing the file "/Library/Server/Calendar and Contacts/Data/Database.xpg/broken-cluster.pg/backup_label".
LOG: startup process (PID 12315) exited with exit code 1
LOG: aborting startup due to startup process failure
........................................................... stopped waiting
pg_ctl: could not start server
Examine the log output.
The log talks about removing the backup_label file. When I do that the log says the following:
pg_upgrade run on Fri Jan 23 09:41:34 2015
command: "/Applications/Server.app/Contents/ServerRoot/usr/libexec/postgresql9.2/pg_ctl" -w -l "pg_upgrade_server.log" -D "/Library/Server/Calendar and Contacts/Data/Database.xpg/b$
waiting for server to start....LOG: database system was interrupted; last known up at 2013-11-02 12:21:52 CET
LOG: starting archive recovery
LOG: invalid magic number D075 in log file 0, segment 2, offset 0
LOG: invalid primary checkpoint record
LOG: could not open file "pg_xlog/000000010000000000000001" (log file 0, segment 1): No such file or directory
LOG: invalid secondary checkpoint record
PANIC: could not locate a valid checkpoint record
FATAL: the database system is starting up
.LOG: startup process (PID 15068) was terminated by signal 6: Abort trap
LOG: aborting startup due to startup process failure
stopped waiting
pg_ctl: could not start server
Examine the log output.
Thanks already for the help -
SAP Does not start after backup complition
Dear All,
Since last two times when we put Offline whole database + Redolog
backup, after complition of backup SAP Does not start.
I have tried to start SAP Manually, but didn't start.
To start SAP we have to restart the SERVER.
Attached please find backup log.
Thanks and Regards,
NiravThanks you all for quick response.
Backup log is pasted at end of message. Wile you please guide me where dev_disp log is located.
I am taking backup through DB13.
When I got this problem. Database was not started. But at O/S level SMON is running. Shutdown normal or transactional was not working. I have to shutdown abort. and start the database.
SAP services are also running at O/S level.
I have doubt about work process.
Thanks
Nirav
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beamxrbx.aft 2009-05-06 04.00.05
BR0484I BRBACKUP log file: /oracle/PRD/sapbackup/beamxrbx.aft
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
BR0101I Parameters
Name Value
oracle_sid PRD
oracle_home /oracle/PRD/102_64
oracle_profile /oracle/PRD/102_64/dbs/initPRD.ora
sapdata_home /oracle/PRD
sap_profile /oracle/PRD/102_64/dbs/initPRD.sap
backup_mode ALL
backup_type offline_force
backup_dev_type tape
compress hardware
tape_copy_cmd dd
cpio_flags -ovB
cpio_in_flags -iuvB
dd_flags obs=64k bs=64k
dd_in_flags ibs=64k bs=64k
rewind mt -f $ rew
rewind_offline mt -f $ offl
tape_size 102400.000 MB
tape_address /dev/rmt/0mn
tape_address_rew /dev/rmt/0m
volume_backup PRDB01,PRDB02,PRDB03,PRDB04,PRDB05,PRDB06,PRDB07,PRDB08,PRDB09,PRDB10,
PRDB11,PRDB12,PRDB13,PRDB14,PRDB15,PRDB16,PRDB17,PRDB18,PRDB19,PRDB20,
PRDB21,PRDB22,PRDB23,PRDB24,PRDB25,PRDB26,PRDB27,PRDB28,PRDB29,PRDB30
expir_period 29
tape_use_count 100
exec_parallel 0
system_info prdadm/oraprd rlsdbi HP-UX B.11.31 U ia64
oracle_info PRD 10.2.0.2.0 8192 7547 46814166 rlsdbi UTF8 UTF8
sap_info 700 SAPSR3 0002LK0003PRD0011Q21439814270013NetWeaver_ORA
make_info hpia64 OCI_102 Apr 21 2007
command_line brbackup -u / -jid ALGOF20090506040000 -c force -t offline_force -m all -p initPRD.sap -a -c force -p initPRD.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815598 ResetId: 674927195
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_1/sr3.data1 2097160192 4 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_2/sr3.data2 2097160192 5 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_3/sr3.data3 2097160192 6 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_4/sr3.data4 2097160192 7 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_5/sr3.data5 2097160192 8 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_10/sr3.data10 2097160192 13 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_6/sr3.data6 2097160192 9 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_7/sr3.data7 2097160192 10 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_8/sr3.data8 2097160192 11 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_9/sr3.data9 2097160192 12 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_11/sr3.data11 2097160192 14 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_12/sr3.data12 2097160192 15 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_13/sr3.data13 2097160192
BR0143I Backup type: offline_force
BR0113I Files will be compressed by hardware
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: PRDB25
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name PRDB25 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.07
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0242I Scratch volume in device /dev/rmt/0mn will be renamed to PRDB25
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.08
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
#SAVED.... sr3700.data7 PRDB25/43
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.17
BR0063I 40 of 62 files processed - 82240.312 MB of 120066.277 MB done
BR0204I Percentage done: 68.50%, estimated end time: 4:29
BR0001I **********************************________________
BR0202I Saving /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
#SAVED.... sr3700.data8 PRDB25/44
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.42
BR0063I 41 of 62 files processed - 84640.320 MB of 120066.277 MB done
BR0204I Percentage done: 70.49%, estimated end time: 4:29
BR0001I ***********************************_______________
BR0202I Saving /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
#SAVED.... sr3700.data10 PRDB25/45
#FILE..... /oracle/PRD/sapdata1/system_1/system01.dat
#SAVED.... system01.dat PRDB25/60
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.07
BR0063I 57 of 62 files processed - 119850.445 MB of 120066.277 MB done
BR0204I Percentage done: 99.82%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g11m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g11m1.dbf
#SAVED.... log_g11m1.dbf PRDB25/61
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.14
BR0063I 58 of 62 files processed - 119900.446 MB of 120066.277 MB done
BR0204I Percentage done: 99.86%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g12m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g12m1.dbf
#SAVED.... log_g12m1.dbf PRDB25/62
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.22
BR0063I 59 of 62 files processed - 119950.447 MB of 120066.277 MB done
BR0204I Percentage done: 99.90%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g13m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g13m1.dbf
#SAVED.... log_g13m1.dbf PRDB25/63
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.29
BR0063I 60 of 62 files processed - 120000.448 MB of 120066.277 MB done
BR0204I Percentage done: 99.95%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g14m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g14m1.dbf
#SAVED.... log_g14m1.dbf PRDB25/64
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.36
BR0063I 61 of 62 files processed - 120050.449 MB of 120066.277 MB done
BR0204I Percentage done: 99.99%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
#SAVED.... cntlrPRD.dbf PRDB25/65
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.42
BR0063I 62 of 62 files processed - 120066.277 MB of 120066.277 MB done
BR0204I Percentage done: 100.00%, estimated end time: 4:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.44
BR0304I Starting and opening database instance PRD ...
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.10
BR0305I Start and open of database instance PRD successful
BR0117I ARCHIVE LOG LIST after backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815880 ResetId: 674927195
BR0056I End of database backup: beamxrbx.aft 2009-05-06 04.28.11
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0291I BRARCHIVE (action ID aeamxrbx) will be started with options '+beamxrbx.aft,42106018475,PRDB25,62 -jid ALGOF20090506040000 -d tape -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2009-05-06 04.31.42
BR0292I Execution of BRARCHIVE (action ID aeamxrbx) finished with return code 0 -
Httpd fail to start after Zend Core installation
Hi!
I need Zend, so I installed it using this instruction.
The problem is that httpd daemon faild to start after that.
Here is my /etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#FastCGI module
LoadModule fcgid_module lib/apache/mod_fcgid.so
AddHandler fcgid-script .php
FCGIWrapper /usr/local/bin/php-cgi .php
SocketPath /tmp/fcgidsock
SharememPath /tmp/fcgidshm
#php module
#LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
ErrorDocument 400 /error.php?400
ErrorDocument 401 /error.php?401
ErrorDocument 403 /error.php?403
ErrorDocument 404 /error.php?404
ErrorDocument 500 /error.php?500
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#php include
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#<VirtualHost *:80>
#ServerName oldforum
#DocumentRoot /srv/oldforum
#</VirtualHost>
### Start of Zend Core
### PHP Apache Module
# LoadModule php5_module /usr/local/Zend/Core/modules/apache22/libphp5.so
### PHP FastCGI
LoadModule zend_enabler_module /usr/local/Zend/Core/modules/apache22/zend_enabler.so
FastCgiConfig /usr/local/Zend/Core/etc/zend_enabler.conf
AddHandler zend-enabler-script .php
### PHP CGI
# Action application/x-httpd-php /zend-cgi/php
# ScriptAlias /zend-cgi/ /usr/local/Zend/Core/cgi-bin/
AddType application/x-httpd-php .php
DirectoryIndex index.php
ExtendedStatus on
Alias /ZendCore /usr/local/Zend/Core/GUI
<Location /ZendCore>
Options FollowSymLinks
Order deny,allow
Allow from all
</Location>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
### End of Zend Core
Here is my /etc/php.ini:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file. It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_globals = Off [Security, Performance]
; Global variables are no longer registered for input data (POST, GET, cookies,
; environment and other server variables). Instead of using $foo, you must use
; you can use $_REQUEST["foo"] (includes any variable that arrives through the
; request, namely, POST, GET and cookie variables), or use one of the specific
; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
; on where the input originates. Also, you can look at the
; import_request_variables() function.
; Note that register_globals is going to be depracated (i.e., turned off by
; default) in the next version of PHP, because it often leads to security bugs.
; Read http://php.net/manual/en/security.registerglobals.php for further
; information.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the execution of
; scripts will no longer be displayed as a part of the script output, and thus,
; will no longer be exposed to remote users. With some errors, the error message
; content may expose information about your script, web server, or database
; server that may be exploitable for hacking. Production sites should have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur during the
; execution of your script will be logged (typically, to your server's error log,
; but can be configured in several ways). Along with setting display_errors to off,
; this setup gives you the ability to fully understand what may have gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically results in less
; writes, and sometimes less packets sent on the wire, which can often lead to
; better performance. The gain this directive actually yields greatly depends
; on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc global
; variables.
; - magic_quotes_gpc = Off [Performance]
; Input data is no longer escaped with slashes so that it can be sent into
; SQL databases without further manipulation. Instead, you should use the
; function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP surpresses errors of type E_NOTICE. These error messages
; are emitted for non-critical errors, but that could be a symptom of a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off
; The unserialize callback function will called (with the undefind class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; Misc
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatability of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
;error_log = filename
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = Off
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
;extension_dir = "./"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
upload_max_filesize = 2M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
; user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25
; For Win32 only.
;sendmail_from = [email protected]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in secondes) for connect timeout. -1 means no limimt
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLI]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "lowercase"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning seperately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 1
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example:
; extension=msql.so
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
zend_core_dir="/usr/local/Zend/Core"
zend_gui_password=63a9f0ea7bb98050796b649e85481845
zend_core.default_gui_language=en
zend_gui.ini_modifier_path="/usr/local/Zend/Core"
extension_dir="/usr/local/Zend/Core/lib/php/20060613"
include_path=".:/usr/local/Zend/ZendFramework/library:/usr/local/Zend/Core/share/pear"
zend_extension="/usr/local/Zend/Core/lib/zend/ZendExtensionManager.so"
zend_extension_manager.optimizer="/usr/local/Zend/Core/lib/zend/optimizer"
zend_extension_manager.debug_server="/usr/local/Zend/Core/lib/zend/debugger"
zend_ini_file=/usr/local/Zend/Core/etc/zend.ini
[zend]
extension=apc.so
extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
extension=curl.so
;extension=db2.so
;extension=exif.so
;extension=ftp.so
extension=gd.so
;extension=gettext.so
;extension=gmp.so
;extension=ibm_db2.so
extension=iconv.so
extension=imap.so
;extension=ldap.so
extension=mbstring.so
;extension=mcrypt.so
;extension=memcache.so
;extension=mhash.so
;extension=ming.so
extension=mysql.so
extension=mysqli.so
;extension=oci8.so
;extension=pcntl.so
extension=pdo.so
;extension=pdo_ibm.so
extension=pdo_mysql.so
;extension=pdo_oci.so
extension=pdo_pgsql.so
;extension=pdo_sqlite.so
extension=pgsql.so
;extension=posix.so
;extension=shmop.so
extension=soap.so
;extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=tokenizer.so
;extension=xmlreader.so
;extension=xmlrpc.so
extension=xmlwriter.so
;extension=xsl.so
;extension=zip.so
;extension=bz2.so
;extension=calendar.so
;extension=db2.so
;extension=exif.so
;extension=ftp.so
;extension=gettext.so
;extension=gmp.so
;extension=ibm_db2.so
;extension=ldap.so
;extension=mcrypt.so
;extension=memcache.so
;extension=mhash.so
;extension=ming.so
;extension=oci8.so
;extension=pcntl.so
;extension=pdo_ibm.so
;extension=pdo_oci.so
;extension=pdo_sqlite.so
;extension=posix.so
;extension=shmop.so
;extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=tokenizer.so
;extension=xmlreader.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
Please, tell me what's the reason and what I should do.
Thanks in advance.Hi Garyalbert,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with No POST on ThinkPad X240.
To resolve the issue I suggest you to perform power drain, to go with power drain option please removing power adapter and battery. Hold the power button for 30 second and then connect only power adapter and try to switch on the system. If the system is switching ON then connect battery and check it once.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Dashboard Design Cache Server failed to start after upgrade to BOBJ 4.0 SP09 Patch 3
Hi Friends,
We have upgraded our BOBJ 4.0 server from SP04 Patch 8 to SP09 patch 3.
After upgrade completed "Dashboard Design Cache Server" Failed to start. other servers are running fine.
xccache_<hostname>.DashboardDesignCacheServer_trace.000003.glf Error Log:
|c24257f2-85df-0f2b-efe2-d7cfe59df826|2014 06 19 14:04:21:444|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||{|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance
-:0:-: TraceLog message 1241
|84f9fa46-c9ce-d9c4-fb5b-a08e6b6c1fea|2014 06 19 14:04:21:451|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||using OSGi emulation; cause: java.lang.ClassNotFoundException: org.eclipse.core.runtime.Platform
-:0:-: TraceLog message 1242
|2eb28d2c-acaa-e2ff-26de-0ce297ad41e5|2014 06 19 14:04:21:502|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||adding contributions from "jar:file:/bobje/sap_bobj/enterprise_xi40/java/lib/dsl_engine.jar!/META-INF/DSLContributions/DSLContributions.properties": DSL-Contribution = com.sap.sl.sdk.datasource.strategy.DataSourceStrategyContribution,com.sap.sl.sdk.services.session.BridgeSessionContribution,com.sap.sl.sdk.session.cms.BridgeCmsSessionContribution,com.sap.sl.sdk.session.filesystem.BridgeFileSystemSessionContribution,com.sap.sl.contributions.EPackageContribution,com.businessobjects.dsl.framework.session.SessionContribution,com.sap.sl.core.emf.registry.GeneratedPackageContribution,com.businessobjects.dsl.services.JavaDPContribution,com.businessobjects.dsl.services.repository.RepositoryServicesContribution,com.businessobjects.dsl.services.olap.sapbw.SapBwBrowsingServicesContribution,com.businessobjects.dsl.services.universe.UniverseServicesContribution,com.businessobjects.dsl.services.security.SecurityServicesContribution,com.businessobjects.mds.consumption.ConsumptionContribution,com.businessobjects.mds.consumption.SecurityKeyServiceContribution,com.businessobjects.mds.olap.protocol.bics.BICSClientContribution,com.businessobjects.mds.olap.protocol.ess_japi.EssJapiClientContribution,com.businessobjects.mds.olap.protocol.sapbapi.SapRfcClientContribution,com.businessobjects.mds.olap.protocol.xmla.XMLAClientContribution,com.businessobjects.mds.olap.OlapClientContribution,com.businessobjects.mds.publishing.PublishingContribution,com.businessobjects.mds.repository.cms.CMSSessionContribution,com.businessobjects.mds.repository.filesystem.FSSessionContribution,com.businessobjects.mds.repository.memory.MemorySessionContribution,com.businessobjects.mds.securedconnection.services.SecuredConnectionContribution,com.businessobjects.mds.security.cms.CMSSecurityContribution,com.businessobjects.mds.security.SecurityContribution,com.businessobjects.mds.services.internal.MdsModelContribution,com.sap.sl.edp.dataprovider.bics.BicsDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.olap.OlapDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.relational.RelationalDataProviderBuilderContribution,com.sap.sl.pquery.PQueryServiceContribution
jvm/Bootstrap.cpp:146:-: TraceLog message 1243
|9992bc42-cf8b-51bd-739f-ee471da81b76|2014 06 19 14:04:22:292|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|47600550826240|| ||||||||||||||||||||||ras21-core: CBootstrap::getSLUserSecurity starting wait loop[3], timeout[119]
-:0:-: TraceLog message 1244
|762aa011-8afb-af8d-6bd6-a61be1be142d|2014 06 19 14:04:22:399|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1245
|4ab25da4-f37d-97ff-b2ad-a97877076bb3|2014 06 19 14:04:22:399|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||}|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance: 00.957
-:0:-: TraceLog message 1246
|d3abc036-3e0f-728a-7dba-e3b540d39fe6|2014 06 19 14:04:22:451|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.bridge.JavaBridgeMain||Could not initialize processing subsystem
java.lang.ExceptionInInitializerError
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
... 10 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
... 11 more
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1247
|7fad3c80-8dfb-1944-911f-4d98498f150a|2014 06 19 14:04:22:491|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||Caught Error at top level
java.lang.ExceptionInInitializerError
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
... 10 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
... 11 more
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1248
|dd2a290d-c8ad-ebea-d1b5-3ebe783e598b|2014 06 19 14:04:22:491|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING JVM PROPERTIES
java.vendor = <SAP AG>
sun.management.compiler = <HotSpot 64-Bit Tiered Compilers>
os.name = <Linux>
sun.boot.class.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sapjvm-alt-rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/resources.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sunrsasign.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jsse.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jce.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/charsets.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jfr.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/classes:/bobje/sap_bobj/enterprise_xi40/java/wily/Agent.jar>
ooc.orb.oa.thread_pool = <64>
java.vm.specification.vendor = <Sun Microsystems Inc.>
businessobjects.server.friendlyname = <halsapad12.DashboardDesignCacheServer>
businessobjects.logs.home = </bobje/sap_bobj/logging/>
java.runtime.version = <6.1.055>
com.sap.vm.version = <10>
businessobjects.ns = <hal-sapa-d12.dc.fmcna.com:6400>
com.wily.log4j.defaultInitOverride = <true>
user.name = <cbi>
user.language = <en>
sun.boot.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64>
java.version = <1.6.0_51>
user.timezone = <America/New_York>
java.net.preferIPv4Stack = <false>
sun.arch.data.model = <64>
java.endorsed.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/endorsed>
sun.cpu.isalist = <>
sun.jnu.encoding = <UTF-8>
file.encoding.pkg = <sun.io>
file.separator = </>
java.specification.name = <Java Platform API Specification>
com.wily.introscope.agent.agentName = <xccache_halsapad12.DashboardDesignCacheServer_java>
java.class.version = <50.0>
user.country = <US>
java.home = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre>
com.sap.vm.compressedoops = <true>
java.vm.info = <Aug 12 2013 00:30:55 - 61_REL - optU - linux amd64 - 6 - bas2:201693 (mixed mode)>
os.version = <2.6.18-128.el5>
path.separator = <:>
businessobjects.enterprise.orb.threadmodel = <threaded>
java.vm.version = <6.1.055 23.5-b02>
com.sap.vm.type = <opt>
introscope.enterprisemanager.serversockets.reuseaddr = <false>
java.awt.printerjob = <sun.print.PSPrinterJob>
sun.io.unicode.encoding = <UnicodeLittle>
com.sap.vm.codeline = <61_REL>
user.home = </sapmnt/CBP/cbi>
java.specification.vendor = <Sun Microsystems Inc.>
tracelog.logdir = </bobje/sap_bobj/logging/>
java.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/../lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/:/bobje/sap_bobj/enterprise_xi40/linux_x86/:/bobje/sap_bobj/enterprise_xi40/linux_x64/wcs/components/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//auth/secEnterprise:/bobje/sap_bobj/enterprise_xi40/linux_x64/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//desktop/CrystalEnterprise.Report:/bobje/sap_bobj/enterprise_xi40/linux_x86/ras:/bobje/sap_bobj/mysql/lib:/bobje/sap_bobj/enterprise_xi40/dataAccess/connectionServer/drivers/lib64:/bobje/perl/lib/5.8.0/i386-linux-thread-multi/CORE:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/lib-i86_linux/X11:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux_optimized:/bobje/oracle/CBI/db_home/lib:/home/db2cbi/sqllib/lib64:/home/db2cbi/sqllib/lib32:/bobje/sap_bobj/enterprise_xi40/linux_x86:/sapmnt/CBP/db2cbi/sqllib/lib64:/sapmnt/CBP/db2cbi/sqllib/lib32:/usr/X11R6/lib:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib>
java.vendor.url = <http://www.sap.com/>
businessobjects.enterprise.orb.thread_pool_size = <5>
java.vm.vendor = <SAP AG>
java.runtime.name = <Java(TM) SE Runtime Environment>
java.class.path = <:/bobje/sap_bobj/enterprise_xi40/java/lib//XcelsiusServer.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc_license_cu.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2java.zip:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc.jar:.::/bobje/sap_bobj/enterprise_xi40//java/wily/Agent.jar>
tracelog.jni = <1>
bobj.enterprise.home = </bobje/sap_bobj/enterprise_xi40/>
businessobjects.enterprise.orb.request_timeout = <3600000>
java.vm.specification.name = <Java Virtual Machine Specification>
java.vm.specification.version = <1.0>
sun.cpu.endian = <little>
sun.os.patch.level = <unknown>
java.awt.headless = <true>
java.io.tmpdir = </tmp>
java.vendor.url.bug = <http://service.sap.com/support>
businessobjects.enterprise.orb.client_timeout = <0>
ooc.orb.oa.conc_model = <thread_pool>
os.arch = <amd64>
java.awt.graphicsenv = <sun.awt.X11GraphicsEnvironment>
java.ext.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext-sap:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext:/usr/java/packages/lib/ext>
user.dir = </bobje/sap_bobj/enterprise_xi40/linux_x64>
bobj.logging = <true>
line.separator = <
>
java.vm.name = <SAP Java Server VM>
file.encoding = <UTF-8>
tracelog.process = <xccache_halsapad12.DashboardDesignCacheServer_java>
com.sap.vm.profilingserver = <true>
java.specification.version = <1.6>
com.wily.introscope.agentProfile = </bobje/sap_bobj/enterprise_xi40//java/wily/halsapad12.DashboardDesignCacheServer.profile>
END TRACING JVM PROPERTIES
-:0:-: TraceLog message 1249
|a79b935e-9c92-9957-35bf-2c937079beb8|2014 06 19 14:04:22:492|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING COMMAND LINE
-loggingPath
/bobje/sap_bobj/logging/
-cache
-documentType
CrystalEnterprise.XL.Query
-nops
-restart
-fg
-name
halsapad12.DashboardDesignCacheServer
-pidfile
/bobje/sap_bobj/serverpids/halsapad12_halsapad12.DashboardDesignCacheServer.pid
-ns
hal-sapa-d12.dc.fmcna.com:6400
-procParentIOR
IOR:010000002500000049444c3a4a6176614272696467652f4941646170746572426f6f7473747261703a312e300000000001000000000000005a000000010101ca1a00000068616c2d736170612d6431322e64632e666d636e612e636f6d006cbd10000000000000001c26a353bb16050003000000010000000100000014000000011af5ca010001000000000000010100000000000200
-libraryName
XcelsiusServer
-useSLUS
END TRACING COMMAND LINE
-:0:-: TraceLog message 1250
|088b0565-be95-fe7f-e474-4e3c45773bbc|2014 06 19 14:04:22:492|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||11 threads are still alive in this JVM
Thread 'Thread[main,5,main]' is still alive
Thread 'Thread[Business Objects - Sessions Clean up,5,main]' is still alive
Thread 'Thread[Thread-2,5,main]' is still alive
Thread 'Thread[Configuration Watch Heartbeat Heartbeat,5,Agent]' is still alive
Thread 'Thread[Remove Metric Data Watch Heartbeat Heartbeat,5,Agent]' is still alive
Thread 'Thread[Agent Heartbeat,5,Agent]' is still alive
Thread 'Thread[Agent Execution,5,Agent]' is still alive
Thread 'Thread[Agent ServerConnection,5,Agent]' is still alive
Thread 'Thread[UnknownHub Hub Transmit 1,5,Agent]' is still alive
Thread 'Thread[UnknownHub Hub Receive 1,5,Agent]' is still alive
Thread 'Thread[PO:client_main Mailman 1,5,Agent]' is still alive
Regards
Kannan KKannan,
the error in your logs like "NoClassDefFoundError" etc. point us towards issues with jar files. either they are missing or not the correct ones.
A general practice in such situation is to
stop all servers except CMS,IFRS,OFRS > repair the base installation
OR
If you have a working environment with the exact same patch, copy the 'lib' folder from "/bobje/sap_bobj/enterprise_xi40/java/" to the non-working server.
PS: please attach the logs to the thread instead of pasting the content.
-Nikhil Nair
Maybe you are looking for
-
Can a family member trade-in?
Can I have my brother trade a few games for me? I can't make it to BBY this week for the 50% bonus. I'll give him my rewards card for the extra 10% GCU.
-
Submitted this to Palm as a feature request. Curious what others think about the idea. I know there are apps such as Active Home Screen (AHS) being tested and developed, but my approach would be contained within WebOS, thus not dependent upon running
-
I went to settings and turned down all the brightness and the flickering disappeared but as soon as I turned it back up it started flickering again so I decided to reset my iphone again. After the iPhone (4) turned back on I tried pulling the bright
-
I got this app -algebra touch- for my girls to play with and learn some algebra. I connected the Ipad 2 to my Vizio with a Digital AV Adapter so that it would be easier to see. Every app on my iPad 2 works fine on the TV except one: Algebra Touch. Wh
-
Dear All, I have done WIP Calculation through the PRoject System, In that settlement Accounting Document is generated. Normally as per as my knowledge ---> While Running of RA it shows the WIP amount ---> While doing the Settlement the WIP amount n