SAP Failover not working on secondary node

Hi All
We have configured HA of SAP on DB2: ASCS,CI and SCS is running on primary node with HACMP clustering installed with virtual hostname,and just running DB2 client on secondary node.
Now we are receiving following error while switching over manually on the secondary node:
Starting SAP-Collector Daemon
21:34:58 26.07.2010   LOG: Effective User Id is root
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 233504) is already running .....
saposcol already running
Running /usr/sap/BP1/SYS/exe/run/startdb
DB startup failed
Below is the output of R3trans -d
This is R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
unicode enabled version
2EETW169 no connect possible: "environment variable dbms_type is not set."
R3trans finished (0012).
And the output of tran.log is as follows:
4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 26.07.2010 - 21:35:52
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Jul 26 21:35:52 2010
      51 0.000051
4 ETW000 [dev trc     ,00000] db_con_init called
      20 0.000071
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)
      33 0.000104
*4 ETW000 [dbcon.c     ,00000] *** ERROR => Invalid profile parameter dbms/type*
(or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000
      52 0.000156
2EETW169 no connect possible: "environment variable dbms_type is not set."
Kindly let us know how to go about in resolving this issue.
Thanks in Advance
Hemant

> Now we are receiving following error while switching over manually on the secondary node:
> 2EETW169 no connect possible: "environment variable dbms_type is not set."
The user <sid>adm lacks the proper environment. Is this environment variable set on both nodes?
Markus

Similar Messages

SAP ECC 6.0 SR3 Cluster failover not working in AIX with DB2 UDB V9.1 FP6

Hi Gurus,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP6 in AIX cluster environment.
After installation we are doing the cluster fail test.
Node A
Application Server
Mount Points:
/sapmnt/<SID>
/usr/sap/<SID>
/usr/sap/trans
Node B
Database Server
Mount Points:
/db2//<SID>
The procedure followed to do the cluster failover:
We have down the cluster on Node A and all the resources of the Node A has been moved to Node B.
On Node B when we issued a command to start the SAP. It says u201Cno start profiles foundu201D
WE have down the cluster on Node B and moved the Resource from Node B to Node A . There the db2 User IDu2019s are not available. We have crated the user Idu2019s manually on Node A. however it did not work.
Please suggest the procedure to start the sap in cluster failover.
Best Regards
Sija

Hi Sija,
Can i have detailed scenario in your cluster configuration.
Means you are saying that going to start cluster package manually, if it is right please make sure that you had the same copy of start, instance profiles of NodeA to Node B. Means you need to maintain two startup, two instance profiles for both nodes. In a normal situation it will picik the profile of node A to start databse from A node. But in a failover situation it will not pick node A profile to start, it should pick Node B s profiles.
Just make a copy from node A and change the profile name accordingly to Node b. Then try to restart.
Regards
Nick Loy

ADSSO Service Not Working on Secondary CAS when done Failover

We are running NAC OS 4.9.2 in OOB L2 Virtual Gateway...
We have CAS Cluster
Primary CAS -- 10.245.220.5 & Secondary CAS -- 10.245.220.6 and Service-IP 10.245.220.4
When in HA Cluster Primary is Active and Secondary is Standby Ok , ADSSO is Working and Service is started
We have capture details of same .
10.245.220.5
2013-04-18 15:46:21.833 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - done building kdc list for domain kotakgroup.com
2013-04-18 15:46:21.833 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - KDC(s) :[kgp-gor-dc01.kotakgroup.com, kgp-gor-dc02.kotakgroup.com, kgp-gor-dc03.kotakgroup.com, kgp-gor-dc04.kotakgroup.com, kgp-gor-dc05.kotakgroup.com, kgp-dr-dc01.kotakgroup.com, kgp-dr-dc03.kotakgroup.com, kgp-dr-dc02.kotakgroup.com]
2013-04-18 15:46:21.833 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2013-04-18 15:46:21.833 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2013-04-18 15:46:21.834 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - creating login context ...
2013-04-18 15:46:21.834 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - created login context ...javax.security.auth.login.LoginContext@bb3f71
2013-04-18 15:46:39.207 +0530 Thread-70 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - Notifying GSSServer status Started
2013-04-18 15:47:07.540 +0530 Timer-3 INFO com.perfigo.wlan.jmx.adsso.GSSRetrier              - GSSR - Windows SSO is running
When Primary is rebooted and Secondary becomes Active Ok , ADSSO is not working and Service is not started
10.245.220.6
2013-04-18 15:50:42.933 +0530 Timer-3 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - Server starting server ...
2013-04-18 15:50:42.933 +0530 Timer-3 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - Server is now running ...
2013-04-18 15:50:42.933 +0530 Thread-68 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - SPN : [casadsso/[email protected]]
2013-04-18 15:50:42.933 +0530 Thread-68 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - building kdc list for domain kotakgroup.com
2013-04-18 15:50:42.934 +0530 Thread-68 ERROR com.perfigo.wlan.jmx.adsso.GSSServer               - Unable to start server ... kotakgroup.com.
2013-04-18 15:50:42.937 +0530 Thread-68 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - Notifying GSSServer status Stopped
2013-04-18 15:50:42.937 +0530 Thread-68 INFO com.perfigo.wlan.jmx.adsso.GSSServer               - server is exiting .
Our Observation is krb.txt is not getting generated when Secondary is Active Ok ...
Can any one suggest how to fix the issue...

Hi,
Can you check and see if dns and ntp are accurate and can you verify your AD environment? What version of domain controllers are in service if there are a mix then other steps like modifying a few files maybe needed.
Also was the secondary CAS replaced or reimaged recently?
Thanks,
Sent from Cisco Technical Support iPad App

Crystal Report orange link arrow to SAP B1 not working

Hello,
I couldn't find a way to insert the actual "arrow" icon into a Crystal report so I copied one from one of the Crystal Reports imbedded in SAP B1 9.0. I subsequently edited the hyperlink to point to the document number I wanted.
From the Format Editor dialog box, Hyperlink, the hyperlink website address is:
http://$b1$/link?table=OPCH&key=1
There was a formatting button to the right of the website address line. Clicking on it yielded a formula workshop dialog box that I edited as follows:
'http://$b1$/link?table=OPCH&key='+ToText({OPCH.DocNum},0,"","")
The Crystal Report runs fine in B1 and shows the link arrows. Hovering the cursor above the hyperlink in print preview yields the specific information for that record. For example, when the report shows A/P Invoice #4394 the screen shows a small pop-up with "http://$b1$/link?table=OPCH&key=4394". Clicking on the arrow brings up a window with a blank! A/P invoice with the cursor located in the "Vendor Invoice No." box (OPCH.NumAtCard field).
Why is this not working to bring up the correct A/P invoice? There are no errors indicated.
Thanks for any assistance.

Thank you, Nagarajan.
Those instructions are exactly what I've done with my report. However, the instructions start with the phrase "manually insert link arrow into Crystal report". OK, I did a Google search on "insert link arrow" and "crystal" and "reports" and "SAP" and there was only ONE webpage with these words on the ENTIRE internet--the page you sent me to. Crystal reports online help has nothing relating to a "link arrow". If there's some special aspect of this link arrow that I'm missing, it sure is a secret because there's nothing out there on this subject. I guess I'll have to copy the graphic from previous reports each time I need to do this.
CORRECT ANSWER:
In any case, I was able to resolve the issue by changing the text in the formatting dialog box from OPCH.DocNum to PCH1.DocEntry and it worked. Why it worked is beyond me. Guessing seems to be the one defining feature of doing work with SAP B1.

Submit to SAP button not working

Hi,
I am creating an online interactive form which connects to R3 table. When I click on the <b>Submit to SAP</b> button no action takes place. Plz suggest a way by which I can put the data from the pdf back to the system.
Thanks in advance,
Prasanna

Hi,
look at the following threads . You may post your query in the Interactive Forms Forum for quick replies related to Interactive Forms.
Submit button is not working.
.Problem with the Submit and Check button
Do update, if you find your solution.
Regards,
Anto

SAP* user not working in new client

Hi,
I created a new client from SCC4. And now I am trying to login with SAP* user and pass password but it is not allowing. Note provided in SAP Config Guide is not working.
I installed SAP Solution Manager 7.0 SP12 and then created a client.
Please let me know how to solve this issue.
Points will be awarded.
Regards.

Hi!
I agree that the issue is probably due to the parameters for the automatic user SAP* - not sure about the Masterpassword though - the newly created client is only an entry in a table at this stage, so I don't think the system will know any password but the hardcoded one...
Something you should be very careful about is the Java-Stack, which is part of SolMan7 and which runs SMD. The Java stack can only interface with one client properly, so I am not sure what's the idea behind the newly created client.
Regards,
Jörg

3.3.3 to 4.0.1.42 not working on secondary server

I upgraded from 3.3.3 to 4.0.1.42 but still with old Base Image for now:
Cisco Secure ACS 4.0.1.42
Appliance Management Software 4.0.1.42
Appliance Base Image 3.3.1.8
CSA build 4.0.1.543.2 (Patch: 4_0_1_543)
I upraded first my master server, that worked fine (after resolving some problems). When I tried to upgrade the "secondary" server, I get the following (in CLI because WEB does not work because services are not started):
CSAdmin starting
CSAuth starting
CSDbSync starting
CSLog stopping
CSMon starting
CSRadius starting
CSTacacs stopped
CSAgent stopped
Appliance upgrade in progress...
The "upgrade in progress" is for almost 60 minutes now.
How do I recover the Web access?

Hi.
OK, it's not anymore with "upgrade in progress" and CPU went down from 100% to 0%. Some services are still in these states:
CSAdmin stopped
CSAuth stopped
CSDbSync starting
CSLog starting
CSMon starting
CSRadius starting
CSTacacs stopped
I tried stoping/starting/restarting them without success, getting this message:
xxxxxxx> restart all
CSAdmin is not running
CSAuth is not running
Error: Failed to stop service: rc = [1052] The requested control is not valid for this service.
So I tried to do a shutdown. After coming back up, CPU is back to 100% and services look this way:
CSAdmin starting
CSAuth starting
CSDbSync starting
CSLog stopping
CSMon starting
CSRadius starting
CSTacacs stopped

SAP Query not working

Hi,
I am facing problem with SAP Query. My query is not working for one particular date. Its giving timeout error when i just give date as input. I tried executing it by giving some particular document as input, then its giving "no data" message but when i check the table data, there are some records for that input condition.
I debugged it, i found that the statement "FETCH NEXT CURSOR cursorname" is throwing sy-subrc eq 4. I couldn't understand the problem.
Any inputs will be very helpful.
Regards,
Mahidhar.

Hi Azeem,
There are more than 10 tables that were used in this query with different types joins like inner join, left outer, right outer join. So i wasnt able to decode the select query that was present in open cursor command.
I have given the date and executed the same in background. It ran in 19min. But when i add one more input parameter, then its running more than a day(still running ). Didn't get the exact problem still.
Regards,
Mahidhar.

Sap query not working after Upgradtion

Hi Experts,
We have recently done up gradation from 4.6 to Ecc 6.0. Since then my Sap query are not working.
Please help how to fix the issue.
Thanks in Advance for your support and time.

Hi,
Do you have any custom indexes for tables in the affected queries that were deleted as part of the upgrade? (ones that didn't exist in the customer namespace? - something working looking into)
Regards,
Ryan Crosby

Failover not working while connecting to Oracle 11g database

Hi,
We have a J2EE application that connects to Oracle 11g database.
The connection URL we are using is as below
jdbc:oracle:thin:@(DESCRIPTION =(SDU=32768)(ADDRESS=(PROTOCOL=TCP)(HOST=abc.hostname.com)(PORT=1525))(ADDRESS=(PROTOCOL=TCP)(HOST= xyz.hostname.com)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=PQR)))
The issue that we are facing is, the database failover is not working.The application only connects to the first host in the TNS entry.Evertime there is a failure in the connection to the first host,manual steps are required to swap the hosts.
This started happening after we upgraded Oracle DB from 9i to 11g.
We are using the client jar of 9i to connect to 11g. Could this be causing the problem?
Thanks In Advance.
-Tara

889517 wrote:
Yes, you are right. Nothing else was updated.
The application still works as expected except the failover.If you are correct then I seriously doubt it has anything to do with java. It would be something to do with Oracle and/or network infrastructure.
If not then it is some small problem with the driver. You can try updating the driver but I wouldn't expect a fix.

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

Failover not working in a cluster environment asks Relogin to Application

Hi,
I have setup cluster on weblogic and deployed CRM (ejb/ear) application.
When I stop managed server which is handling request other managed server picks the request but it asks for relogin.
I think failover is not working properly.
Could you please help?
Thanks,
Vishal

Hi Kalyan,
Please See below Diagnostics:
Managed Server1:
===================================================
Date: Tue Sep 04 18:33:12 IST 2012
DdCompnt=11,SessionContext=7,CurrJvmHeapMB=235,Bos=2,JForm=1,MaxBoRowCount=493,JApp=13,JField=1,JDdField=1,JSession=6,Sessions=7,JBaseBo=2,Misc=74,JPTrace=1,LpmErrors=1,Forms=1,Active Sessions=6,JDdTable=1021,MaxJvmHeapMB=467,MaxBos=18,BoRowCount=33,JError=1,JFields=1,UtlRecs=175,FlexAttr=-5,UserContext=3
Managed Server2:
===================================================
Date: Tue Sep 04 18:33:20 IST 2012
DdCompnt=11,SessionContext=8,CurrJvmHeapMB=226,JForm=1,JApp=13,JSession=7,Sessions=8,Misc=148,JPTrace=1,Forms=1,Active Sessions=7,JDdTable=1124,MaxJvmHeapMB=472,UtlRecs=81,FlexAttr=-5,UserContext=4
Free Java Heap Memory: 258400 KB
Total Java Heap Memory: 495779 KB
I tried to open many sessions. Its assigning randomly, but when I kill Managed Server2, its corresponding sessions are not working.
System Error error executing LPoms.getUserContext()
Also I found following warning in Weblogic logs.
<Sep 4, 2012 6:26:15 PM IST> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. The configuration may need altered.>
Thanks for your immediate help.

I can not configure the secondary node for shared appl_top

when i run the perl -l txkSOHM.pl comand in the secondary node for shared appl_top. the system returns a "valid java executable not found"
i did check all my environments variables, all is exactly just like the primary node.
anybody can help me???

$ perl -l txkSOHM.pl
Absolute path of Application's Context XML file :
/u01/oracle/snb2appl/admin/SNB2_pth1ap.xml
Type of Instance [primary/secondary] :
secondary
Absolute path of 8.0.6 Shared Oracle Home :
/u03/oracle/snb2ora/8.0.6
Absolute path of iAS Shared Oracle Home :
/u03/oracle/snb2ora/iAS
Absolute path of config top :
/u03/oracle/PTH1
Oracle Application apps schema password :
pu3rt0
*** USER FEEDBACK ***
Absolute path of Application's Context XML file : /u01/oracle/snb2appl/admin/SNB2_pth1ap.xml
Type of Instance [primary/secondary] : secondary
Absolute path of Shared Oracle Home top :
Absolute path of 8.0.6 Shared Oracle Home : /u03/oracle/snb2ora/8.0.6
Absolute path of iAS Shared Oracle Home : /u03/oracle/snb2ora/iAS
Absolute path of config top : /u03/oracle/PTH1
Run AutoConfig [y/n] : y
Oracle Application apps schema password : pu3rt0
Absolute path of the log file : /u02/oracle/pth1comn/admin/log/SNB2_pth1ap/txkSetSOHM.log
Prompt for confirmation [y/n] : n
Absolute path of 8.0.6 config Home : /u03/oracle/PTH1/8.0.6
Absolute path of iAS config Home : /u03/oracle/PTH1/iAS
Application's Context file Saved as : /u01/oracle/snb2appl/admin/SNB2_pth1ap.xml.SOH
Valid java executable not found

CVP Failover Not working

Hi,
I have UCCE with CVP in my environment and also we are having 2 Call/VXML server for redundancy purpose. I have configured below command on VXML GW also created dialpeer towards my second call/vxml server to achieve redundancy but somehow my fail over is not working.
My UCCE with primary CVP is working fine without having any issue.
ip host mediaserver x.x.x.x
ip host mediaserver-backup x.x.x.x
Also I have used media_server ECC variable as 'mediaserver' to achieve redundancy.
I'm not sure weather i am missing any other configuration to achieve the fail over.
Please suggest.

Thanks Chaitan for your reply.
Yes, I am looking for redundancy as if CVP1 goes down, then calls should go to CVP2.
We are not using SIP proxy in our environment. Please find dial-peer configuration which are targeting to CVP1 & CVP2
dial-peer voice 7701 voip
destination-pattern 77..
translate-outgoing called 1
session protocol sipv2
session target ipv4:168.167.0.162 (CVP1)
session transport tcp
voice-class codec 1
voice-class h323 1
dtmf-relay rtp-nte h245-signal h245-alphanumeric
no vad
dial-peer voice 7702 voip
destination-pattern 77..
translate-outgoing called 1
session protocol sipv2
session target ipv4:168.167.0.163 (CVP2)
session transport tcp
voice-class codec 1
voice-class h323 1
dtmf-relay rtp-nte h245-signal h245-alphanumeric
no vad
Thanks

SAP ECC 6.0 SR3 Cluster failover not working in windows with DB2 UDB V9.1 F

Dear Expertise,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP5 in windows cluster environment.
We have installation following instances on nodes 1 and 2.
Node 1
DB2 database software
Central service instance for ABAP Installation on Shared drive G:
First MCSC node to create a cluster group u201Cpdssapgrpu201D
Database group u201Cpgsdbgrpu201D(Shared Drive)
Enqueue replication service
CI (central instance)(local Drive)
Node 2
DB2 database software
Additional cluster node
Enqueue replication service
DI(dialog instance)(local Drive)
I can login into the system using both CI and DI.
if my SAP Cluster group is moved from one node to another i can still login into the system
But when my DB2 group is moved from node A to node B my SAP services are getting closed
and i am getting the message database not found
so please Guide me as soon as possible Friends.
Thanks and Regards,
Ravindra
Edited by: Ravindra Bade on Mar 6, 2009 10:22 AM

Hi Ravidra
Have u solved the probelm I also have the same problem when i move the groups from node1 to node2 manually my 2 servrces 00 and 01 are failed not able to bring up again. If You solve the problem please guide me the solution to solve this.
THanks in advance

SAP Failover not working on secondary node

Similar Messages

Maybe you are looking for