SAP Fiori and Afaria

Hi everyone
I am not familiar with Afaria besides the fact that its a mobile device management tool. What I want to know is how does does Afaria work with SAP Fiori and what are the pros and cons of deploying SAP Fiori with/on Afaria and do I need Fiori client if I decide to use Afaria?
Kind regards

Hi Eli,
You could use Afaria to configure Fiori Client - pre-configure Fiori URL, deploy app to device remotely, install certificate in device for authentication in the case of HTTPS.
Regards,Midhun
SAP Technology RIG

Similar Messages

Difference between below SAP FIORI and where to deploy

Hi,
Planning to evaluate FIORI.
Backend System is SAP ERP6.0 with EHP7 SP6
Frontend system SAP Netweaver 7.40 SP5
Need some clarity.
Where need to deploy SAP Fiori for Suite on backend system or frontend sytem ?
What are the difference between below SAP FIORI ?.
FIORI ERP APPLICATIONS X1
FIORI ERP APPLICATIONS X2
SAP FIORI FOR SAP ERP
Regards,
Nikunj Thaker
Tags edited by: Michael Appleby

Hi Nikunj,
I would recommend going to http://scn.sap.com/community/mobile and reading the What is SAP Fiori UX? page with all of its links. There is a wealth of information there on the whole topic of Fiori.
X1 (aka Wave 1) is the first release of Fiori with 25 apps and a starting point referred to as Launchpage.
X2 (aka Wave 2) is the second release. It changed the starting point from Launchpage to Launchpad with some rather major changes in design, configuration, installation, and features.
SAP FIORI FOR SAP ERP is a reference to applications created for use with SAP ERP (as opposed to SAP CRM, SAP SRM, etc.).
Regards, Mike
SAP Customer Experience Group - CEG

SAP FIORI and Gateway as standalone

Hi
I want to install Netweaver gateway and FIORI for paystub app.
I want to decide whether i should install these on the current ECC6 EHP6 box or install them on a separate box.
What are the pros and cons with both situations
Thanks
Tushar

Hi Tushar,
NW gateway is installed on top of NW ABAP as an add-on and the hardware resource required is less too. However, segregating from your backend ECC(embedded) system and installing in central HUB gives it flexibility and advantage in terms of being a standalone instance in your landscape. When installed on a separate host, NW gateway security comes into play. Have a look at the security guide to understand its needs.
Also, for pros and cons:
Refer; https://help.sap.com/saphelp_gateway20sp06/helpdata/en/88/889a8cbf6046378e274d6d9cd04e4d/content.htm?frameset=/en/62/91a…
Regards,
Divyanshu

How to add two services in a single application in SAP FIORI

Hi Experts,
            I am working on SAP FIORI and created a starter application project using oData services. Initially i am adding one service from catalog and i want that service details ie., Business Partners to be displayed in my master view. Till this I am able to see the data in my master view.
        Now i would like to add one more service with which i should be able to see the item details of each and every BP.
But i dont know where to add this second service and how..?
Can anybody help me in solving this issue??

Hi,
         My problem is fixed, they are calcualted if you have a child nodes. How means Revenue is positive and Expenses are negative. So we get difference of this two.
Thanks
Ganesh Reddy.

Decimal Notation IDR Currency on SAP Fiori

Dear Expert,
I had trouble with decimal notation on SAP Fiori. While I look My Spend on SAP Fiori, amount is different in ECC SAP with decimal notation.
In SAP Fiori : 98.130 IDR
In ECC SAP : 9.813.000 IDR
That's different on SAP Fiori and ECC SAP. I want amount in my Spend on SAP Fiori same with Amount in ECC SAP. I think SAP Fiori still pick the table (WRBTR) before calculate *100 with currency IDR, because ECC SAP automatic calculate *100 when IDR Currency.
( I think SAP Fiori like this piture, because it pick WRBTR table, and i want SAP Fiori pick Table in G/L Amount on ECC SAP)
How to solve this in SAP Fiori?
Thank You

Hi Dattaraya,
If I change decimal place of currency code IDR on OY04, it will change value on ECC SAP. It's mean like on SAP Fiori and ECC SAP same 98.130 but it's wrong. I want in SAP Fiori same with amount on ECC SAP, IDR 9.8130.000. I think SAP Fiori still pick the table before calculate *100. How to solve it?
Thank You

SAP Fiori FireFox Browser Support

Hi All
We working on SAP Fiori and our SAP UI5 is hosted on Gateway SAP UI5 is of version 1.12.5 .
SAP Gateway SP - 7
SAP ECC SP - 8
Let us know if there are any information or note avilable which talks about Firefox supported by SAP UI5 1.12.5.
Please let us know if there is a note which talks about browser support versus UI5 development kit library version .
Regards
Sunanda Mandavi

Hi Sunanda,
Please check this page. The first 2 links have version info.
SAP Fiori - Mobile
Regards,
Masa
SAP Rapid Innovation Group - RIG

What's the difference between sapui5, sap fiori ...

Hi everyone!
I just want an overview explanation (please don't put links, I want personal opinions based on your knowledge) of the differences between SAPUI5 - SAP Fiori and what's their role within those technologies: SAP R/3 - SAP B1 - SAP HANA?
And another thing, what are the different skills an ABAP SAP Developer in SAP R/3 could extend in those technologies (using SAPUI5) in order to be updated to the lasts features required to an ABAP SAP Developer (or SAP Consultant) ?
Please, I want to understand how all those things are linked together, just an overview explanation please.
Thank you very much,
Denis

Hi Chandan,
i guess this could really be some important information for people new to SAP. However, why is it posted on a seperat platform with the need for an other login. It would be much better if the information was available here on SCN.
Christian

SAP Fiori for CRM 7.0/CRM 7.02

Hi All,
We are planning to use SAP Fiori and Gateway as a Standalone Server and with CRM 7.0 and CRM 702 which is running since 3 years.
In the first box we will install Latest Netweaver with Addon of SAP Gateway, but we are confused with the Fiori part.
Question: Is Fiori supported by CRM 7.0 and CRM 7.0 EHP2?
2. Is there any backend component which has to be installed on CRM Server?
I have gone through the scn documents and still not clear.
Can anyone help me in clarifying my doubts?
Thanks,
Sharib

I recently installed Fiori for SAP ERP and from that I can confirm that Fiori contains two parts:
one backend part and one frontend part.
According to note1931218 - General Information: Fiori for CRM you need EHP3 for CRM 7.0 (SP-stack 04 to use latest SP (SP02) for Fiori).
You can also find some release information in the following note:
1959305 - Release Information Note: SAP Fiori transactional apps for SAP CRM 1.0
If you go to http://service.sap.com/swdc choose "Browse our Download Catalog", you can choose "SAP Fiori" and then "SAP Fiori for Suite" in the main area of the browser.
the backend part is the one called "FIORI CRM APPLICATIONS X2".
the frontend part is called "UI FOR SAP CRM ENHANCE PACKAGE".
That's about all I know about the Fiori for CRM and I'll hope you can continue from here.

SAP Fiori - Who and How?

Hello guys!
Well, i managed to install SAP Fiori Apps on BackEnd and UI Add-Ons on NW GW 2.0 SP08, i've been following most of the guides by myself and i still can't make PO Approval work. As a BASIS should i be doing this by myself? How can i know in Fiori which are BASIS, ABAP or Functional tasks?
    Im pretty new to NW GW and most of my experience as a BASIS comes from ERP Administration and installations.
All answers would be gladly appreciated.
Best Regards.

Hello guys,
First of all i would like to thank you for your responses, you are very kind to take the time for it.
@Masayuki Sekihara My main question was about who is responsible for the whole activities during a SAP Fiori implementation.
@Midhun VP Thanks for your response.
@Tejas Chouhan
Hi
     Right now the issue i am having is that i have no data showing in the PO Aprroval App. I've followed step by step the install guide and steps in help.sap.com regarding UI5, Gateway and Fiori, in fact i've destroyed and reconstructed the configuration several times now but with no avail.
I do know release strategy is configured, although i do not know if workflow option used is 1. I get to receive the PO in SBWP and it is not approved, it was created by the MM consultant for testing purposes.
Same TaskID used in assign task to scenario is configured here
Using custom workflow so we substituted the standard with this one.
I think RFC are okay since the app launches with no error messages and when i test all url's in /IWFND/GW_CLIENT they all end with status 200 (OK).
    I use latest versión of Google Chrome for the testing on my laptop (Win7 Pro x64), the consumer type for the scenario is DESKTOP, MOBILE and TABLET (or should i need to construct an scenario to each consumer type?).
     Support Package wise i have this:
Gateway Server (Central Hub):
All SAP UI add-on's (UI2 and UI5) are on SP07.
GW_CORE and IW_BEP are on SP08.
UIAPP002 is SP03.
UIX01CA1 is SP00.
BackEnd Server:
IW_PGW is SP05.
IW_BEP is SP08.
GBAPP002 is SP03.
Both servers are based on NW 7.31 and have Kernel 721 EXT_UC x64 level 100.
    Whether i use the app url with or without the ?sap-client=<client> part, the result is the same, no data shows.
     As i said we are using a custom workflow, but besides that for everything else configuration is standard by the guides.
Any input will be appreciated.
Regards,
Martim.

SAP Fiori "My travel and expenses"

Hello experts
I am missing a "how to" manual on SAP Fiori "My travel and expenses".
Which components goes where, which notes should be applied, and is there any specifics regarding the actual activation and use through the launchpad?
Best regards
Simon

Simon,
Here it is. SAP Note.
2011266 - FIORI Launchpad configuration for MyTravel And Expenses
2008622 - Fiori app My Travel and Expenses : supplementary information for Travel Management OnPremise users

SAP UI5 AND FIORI

Hi experts,
some one can provided me basic documents for starting SAP UI5 & SAP FIORI.

Hi Kranthi,
Enclosed below link
SAP Fiori : http://scn.sap.com/docs/DOC-41598?url_id=text-search-best-best-scn-doc-41598
SAP UI5 : SAPUI5 SDK - Demo Kit
Regards
Naresh

SAP Fiori Launch Page and Fiori Apps Wave 2

Hi,
is it technically possible to add all Transactional Fiori Apps of Wave 2 to the old SAP Fiori Launch Page?
BR, René.

Hi Rene,
There were roughly 20 Wave 2 apps which were Back Ported (Downported?) to run in Wave 1 (Launchpage). This was not done with all possible apps, but contained the ones that customers complained most about (squeeky wheel gets the grease process).
Take a look at SAP Fiori for Releases prior to SAP Business Suite 7 Innovations 2013 – SAP Help Portal Page. The Principal Apps are those which were originally released for Wave 1 (Launchpage). They have all been Upported (rewritten) to Wave 2 (Launchpad). Where they reference
SAP Fiori transactional apps for SAP CRM 1.0 or
SAP Fiori transactional apps for SAP ERP 1.0
it is referring to the apps built for Wave 2 (Launchpad) which have been rewritten to work in the previous version Wave 1 (Launchpage). When installing these apps, make sure you get the correct download for your environment (Launchpad or Launchpage).
Regards, Mike
SAP Customer Experience Group - CEG

Getting an Error while trying to Approve Requisition in SAP Fiori PR Approval App

Hi Experts,
We have followed all the instructions given in the installation/configuration of SAP Fiori PR APPROVAL APP. While approving the PR from Lunchpad we are getting the following error.
ERROR :"RFC Error : Internal program error; (SAPMSSY1 ZCL_IM_ME_PROCESS_REQ_CTSD====CP 1 CBRC_EXIT_47_PURREQ)"
2) I have put a debugger in the USER_EXIT : "CBRC_EXIT_47_PURREQ" and checked that the value of SY_UCOM is initial and when i store the value "MESAVE" and run through debugging i am able to approve the PR. I want to get rid of this Debugging mode and run the PR APP from Launchpad properly without error.
Attached are the three screenshots for more referenece.
Kindly help me with the same.
Thanks & Regards:
AZhar

Am i getting this Error for the below reason?..
Because i am also getting the Same Error as the error in the below post.
POST "Fiori - Approve Purchase Requisition Error"
Please find the attached error screenshot and confirm.
Thanks & Regards:
Azhar

Error - SAP Fiori (CRM standard application)

Hi Experts,
We are implementing standard CRM Fiori application – My Opportunities. No customization has been done to this app.
Error is appearing while trying to open “Account” popup window. Error message is as below.
{"error":{"code":"005056A509B11ED1B9BF9F46AA8E82ED","message":{"lang":"en","value":"In the context of Data Services an unknown internal server error occured"},"innererror":{"transactionid":"56E6CDE42550F16B8C7790B11C17C9CA","timestamp":"20150319031631.3160000","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"}}}}
Log file description in Tcode : /IWFND/ERROR_LOG - Dereferencing the NULL reference.
System details:
SAP Netweaver 7.4 SP 06.
SAP CRM 7.0 EHP 3
SAPUI5 library - 1.26.8
UIX02CRM 100 – SP03
Please suggest how to resolve this error. We have implemented below SAP notes.
1979694
Fiori App: Enhance Log Display of Changes in My Opportunitie
1996733
Multiple transaction types in My Notes App - DDIC Object
1996734
Multiple Transactions in My Notes App - SNOTE changes
1997578
Employee Responsible Blanking out - LEAD
1997580
Employee Responsible Blanking out - Opportunity
1998138
Accept/Reject Lead- Employee Responsible check
1999951
Accept/Reject Lead- Employee Responsible check- DDIC
2014206
Change pointers for marketing attributes in CRM
2015743
CRM Fiori: My Opportunites / My Leads - Set the maximum hit
2048330
Fiori Opportunity Search: Filtering by Opportunity ID issue
2103131
SAPUI5 Fixes for update via SMP
2107709
Corrections for Fiori App: My Opportunities
2108617
Hotfix 1.26.3 for UI AddOn SP11 SC:UI2_SRVC
2111116
Enable own support-message-system for Fiori Embedded Support
2111618
Sorting order of role menu entries for folders /reference us
2115450
Fix: Remove AUTH_DEFAULT in SAP Fiori content checker
2119477
UI theme designer for ABAP: Version 1.8.1
2119807
Fiori: Filter with Date attribute is not working as expected
2119878
Creation of server relative URL for non-Fiori business apps
2123909
Fiori Launchpad Designer - SP11 functional corrections
2126801
SAPUI5 Repository Load / Http: .Ui5RepositoryIgnore and othe
2128620
Image upload corrections in Suite Page Builder Application
2128676
SAPUI5 upgrade to version 1.26.8
2135804
SAPUI5 patch via SMP - better error handling
2137006
Suite Page Builder - Corrections for the disable personalization.
Thanks & Regards,
Jyoti Prakash Das

Hi Masa,
The CRM version in our landscape is : CRM 7.0 EHP3
But we have installed below versions in Fiori.
UIX02CRM (release 100) SP3.
GBX02CRM SP3
Please suggest whether we need to uninstall them and install new versions(CRM001-CRM 7.0 EhP3 SPS07).
Also system does not allow to uninstall existing components. Please advice on this.
Thanks,
Jyoti Prakash Das

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

SAP Fiori and Afaria

Similar Messages

Maybe you are looking for