SAP FIORI and Gateway as standalone

Hi
I want to install Netweaver gateway and FIORI for paystub app.
I want to decide whether i should install these on the current ECC6 EHP6 box or install them on a separate box.
What are the pros and cons with both situations
Thanks
Tushar

Hi Tushar,
NW gateway is installed on top of NW ABAP as an add-on and the hardware resource required is less too. However, segregating from your backend ECC(embedded) system and installing in central HUB gives it flexibility and advantage in terms of being a standalone instance in your landscape. When installed on a separate host, NW gateway security comes into play. Have a look at the security guide to understand its needs.
Also, for pros and cons:
Refer; https://help.sap.com/saphelp_gateway20sp06/helpdata/en/88/889a8cbf6046378e274d6d9cd04e4d/content.htm?frameset=/en/62/91a…
Regards,
Divyanshu

Similar Messages

  • SAP Fiori and Afaria

    Hi everyone
    I am not familiar with Afaria besides the fact that its a mobile device management tool. What I want to know is how does does Afaria work with SAP Fiori and what are the pros and cons of deploying SAP Fiori with/on Afaria and do I need Fiori client if I decide to use Afaria?
    Kind regards

    Hi Eli,
    You could use Afaria to configure Fiori Client -  pre-configure Fiori URL, deploy app to device remotely, install certificate in device for authentication in the case of HTTPS.
    Regards,Midhun
    SAP Technology RIG

  • Difference between below SAP FIORI and where to deploy

    Hi,
    Planning to evaluate FIORI.
    Backend System is SAP ERP6.0 with EHP7 SP6
    Frontend system SAP Netweaver 7.40 SP5
    Need some clarity.
    Where need to deploy SAP Fiori for Suite on backend system or frontend sytem ?
    What are the difference between below SAP FIORI ?.
    FIORI ERP APPLICATIONS X1
    FIORI ERP APPLICATIONS X2
    SAP FIORI FOR SAP ERP
    Regards,
    Nikunj Thaker
    Tags edited by: Michael Appleby

    Hi Nikunj,
    I would recommend going to http://scn.sap.com/community/mobile and reading the What is SAP Fiori UX? page with all of its links.  There is a wealth of information there on the whole topic of Fiori.
    X1 (aka Wave 1) is the first release of Fiori with 25 apps and a starting point referred to as Launchpage.
    X2 (aka Wave 2) is the second release.  It changed the starting point from Launchpage to Launchpad with some rather major changes in design, configuration, installation, and features.
    SAP FIORI FOR SAP ERP is a reference to applications created for use with SAP ERP (as opposed to SAP CRM, SAP SRM, etc.).
    Regards, Mike
    SAP Customer Experience Group - CEG

  • SAP Fiori for CRM 7.0/CRM 7.02

    Hi All,
    We are planning to use SAP Fiori and Gateway as a Standalone Server and with CRM 7.0 and CRM 702 which is running since 3 years.
    In the first box we will install Latest Netweaver with Addon of SAP Gateway, but we are confused with the Fiori part.
    Question: Is Fiori supported by CRM 7.0 and CRM 7.0 EHP2?
    2. Is there any backend component which has to be installed on CRM Server?
    I have gone through the scn documents and still not clear.
    Can anyone help me in clarifying my doubts?
    Thanks,
    Sharib

    I recently installed Fiori for SAP ERP and from that I can confirm that Fiori contains two parts:
    one backend part and one frontend part.
    According to note1931218 - General Information: Fiori for CRM you need EHP3 for CRM 7.0 (SP-stack 04 to use latest SP (SP02) for Fiori).
    You can also find some release information in the following note:
    1959305 - Release Information Note: SAP Fiori transactional apps for SAP CRM 1.0
    If you go to http://service.sap.com/swdc choose "Browse our Download Catalog", you can choose "SAP Fiori" and then "SAP Fiori for Suite" in the main area of the browser.
    the backend part is the one called "FIORI CRM APPLICATIONS X2".
    the frontend part is called "UI FOR SAP CRM ENHANCE PACKAGE".
    That's about all I know about the Fiori for CRM and I'll hope you can continue from here.

  • SAP Fiori FireFox Browser Support

    Hi All
    We working on SAP Fiori and our SAP UI5 is hosted on  Gateway SAP UI5 is of version 1.12.5 .
    SAP Gateway SP - 7
    SAP ECC SP - 8
    Let us know if there are any information or note avilable which talks about Firefox supported by SAP UI5 1.12.5.
    Please let us know if there is a note which talks about browser support versus UI5 development kit library version .
    Regards
    Sunanda Mandavi

    Hi Sunanda,
    Please check this page. The first 2 links have version info.
    SAP Fiori - Mobile
    Regards,
    Masa
    SAP Rapid Innovation Group - RIG

  • How to add two services in a single application in SAP FIORI

    Hi Experts,
                I am working on SAP FIORI and created a starter application project using oData services. Initially i am adding one service from catalog and i want that service details ie., Business Partners to be displayed in my master view. Till this I am able to see the data in my master view.
            Now i would like to add one more service with which i should be able to see the item details of each and every BP.
    But i dont know where to add this second service and how..?
    Can anybody help me in solving this issue??

    Hi,
             My problem is fixed, they are calcualted if you have a child nodes. How means Revenue is positive and Expenses are negative. So we get difference of this two.
    Thanks
    Ganesh Reddy.

  • Decimal Notation IDR Currency on SAP Fiori

    Dear Expert,
    I had trouble with decimal notation on SAP Fiori. While I look My Spend on SAP Fiori, amount is different in ECC SAP with decimal notation.
    In SAP Fiori : 98.130 IDR
    In ECC SAP : 9.813.000 IDR
    That's different on SAP Fiori and ECC SAP. I want amount in my Spend on SAP Fiori same with Amount in ECC SAP. I think SAP Fiori still pick the table (WRBTR) before calculate *100 with currency IDR, because  ECC SAP automatic calculate *100 when IDR Currency.
    ( I think SAP Fiori like this piture, because it pick WRBTR table, and i want SAP Fiori pick Table in G/L Amount on ECC SAP)
    How to solve this in SAP Fiori?
    Thank You

    Hi Dattaraya,
    If I change decimal place of currency code IDR on OY04, it will change value on ECC SAP. It's mean like on SAP Fiori and ECC SAP same 98.130 but it's wrong. I want in SAP Fiori same with amount on ECC SAP, IDR 9.8130.000. I think SAP Fiori still pick the table before calculate *100. How to solve it?
    Thank You

  • What's the difference between sapui5, sap fiori ...

    Hi everyone!
    I just want an overview explanation (please don't put links, I want personal opinions based on your knowledge) of the differences between SAPUI5 - SAP Fiori and what's their role within those technologies: SAP R/3 - SAP B1 - SAP HANA?
    And another thing, what are the different skills an ABAP SAP Developer in SAP R/3 could extend in those technologies (using SAPUI5) in order to be updated to the lasts features required to an ABAP SAP Developer (or SAP Consultant) ?
    Please, I want to understand how all those things are linked together, just an overview explanation please.
    Thank you very much,
    Denis

    Hi Chandan,
    i guess this could really be some important information for people new to SAP. However, why is it posted on a seperat platform with the need for an other login. It would be much better if the information was available here on SCN.
    Christian

  • Does any Implemented SAP FIORI in ECC + Gateway Server

    Hi Folks,
    Does any one implemented SAP FIORI Apps in below scenario where ECC (ODdata components) in Sand box and Gatewayserver (UI Components) Sand box as separate machines?
    We have configured Odata component (gbapp_poapproval) in ECC, and UI Component (ui5_mm_po_apv) in Netwevaer Gate way server.
    Now Services got activated in Both Machines
    We getting an error as "No service found for namespace GBAPP_POAPPROVAL, version 0001." while we run the application through Browser.
    Do we need to install GBAPP_POAPPROVAL component also in Netweaver gateway server?
    Attached Snap shot in Detail
    Manage Sys Alias in ECC Server
    Activated GBAPP_POAPPROVAL Service in ECC
    Manage SYS ALIA IN GW Server
    Activates Taskprocess Services
    Error, while Browsing App
    Regards
    Message was edited by: Naresh Chittoor

    Hi Naresh,
    That is exactly you need to understand Gateway runtime architecture. Take your time for understanding big picture first, then move to how to setp.
    OData model provider class and data provider class are on ERP.
    You have to register ERP side OData services on Gateway server as proxy. It is the transaction /iwfnd/maint_service. To select service from ERP backend, you have to specify backend system alias.
    Your system environment makes confusions.
    + You have Gateway components on Gateway server but you have also Gateway component on ERP
    + You have registered the OData service on ERP instead of Gateway. It is incorrect setting for Hub deployment.
    Regards,
    Masa
    SAP Customer Experience Group - CEG

  • SAP Fiori: Version Management for SAP Gateway Enhanced Services & SAP UI5 Application

    Hello Experts,
    Greetings!!
    I would like to check how version control is achieved for SAP Fiori app extensions. Or while enhancing the SAP UI5 applciation or enhancing a SAP netweaver gateway backend service for Fiori App.
    I would appreciate your inputs. Thanks in Advance.
    Sudhanshu ~
    Tags edited by: Michael Appleby

    For front end SAPUI5 CODE in Elipse or RIVER RDE you can use GIT which is pretty standard way of doing code management. Once you push the code to GW it is in BSP and then you dont have much control on the version management side. If there are multiple developers working on front end code then you can push to GW using ABAP Team Provider plugin in Eclipse that pushes the sapui5 code to BSP via workbench request and once 1 developer is done then he/she will submit the code. the next person then does the GET from GW into their Eclipse to get the latest version of source code. But if there are 10 changes to the sapui5 code then on front end side you should use GIT or BitBucket or MS Team Share kind of source code control tools that integrate with ECLIPSE.
    For oData Service you can do version management in ABAP stacks. you can have multiple versions for your service and then deploy to prod the one that you are sure of. Std change management can be used for backend GW service development.
    thanks
    Ashish

  • SAP Fiori - Who and How?

    Hello guys!
    Well, i managed to install SAP Fiori Apps on BackEnd and UI Add-Ons on NW GW 2.0 SP08, i've been following most of the guides by myself and i still can't make PO Approval work. As a BASIS should i be doing this by myself?  How can i know in Fiori which are BASIS, ABAP or Functional tasks?
        Im pretty new to NW GW and most of my experience as a BASIS comes from ERP Administration and installations.
    All answers would be gladly appreciated.
    Best Regards.

    Hello guys,
    First of all i would like to thank you for your responses, you are very kind to take the time for it.
    @Masayuki Sekihara  My main question was about who is responsible for the whole activities during a SAP Fiori implementation.
    @Midhun VP Thanks for your response.
    @Tejas Chouhan
    Hi
         Right now the issue i am having is that i have no data showing in the PO Aprroval App. I've followed step by step the install guide and steps in help.sap.com regarding UI5, Gateway and Fiori, in fact i've destroyed and reconstructed the configuration several times now but with no avail.
    I do know release strategy is configured, although i do not know if workflow option used is 1. I get to receive the PO in SBWP and it is not approved, it was created by the MM consultant for testing purposes.
    Same TaskID used in assign task to scenario is configured here
    Using custom workflow so we substituted the standard with this one.
    I think RFC are okay since the app launches with no error messages and when i test all url's in /IWFND/GW_CLIENT they all end with status 200 (OK).
        I use latest versión of Google Chrome for the testing on my laptop (Win7 Pro x64), the consumer type for the scenario is DESKTOP, MOBILE and TABLET (or should i need to construct an scenario to each consumer type?).
         Support Package wise i have this:
    Gateway Server (Central Hub):
    All SAP UI add-on's (UI2 and UI5) are on SP07.
    GW_CORE and IW_BEP are on SP08.
    UIAPP002 is SP03.
    UIX01CA1 is SP00.
    BackEnd Server:
    IW_PGW is SP05.
    IW_BEP is SP08.
    GBAPP002 is SP03.
    Both servers are based on NW 7.31 and have Kernel 721 EXT_UC x64 level 100.
        Whether i use the app url with or without the ?sap-client=<client> part, the result is the same, no data shows.
         As i said we are using a custom workflow, but besides that for everything else configuration is standard by the guides.
    Any input will be appreciated.
    Regards,
    Martim.

  • SAP.m JS/XML and Gateway service

    Hello
    I've been trying to consume a gateway service with the sap.m classes.
    it turned out quite difficult for me as im new in this whole web thing, and most of the examples for sap.m are in XML.
    i've tried to convert some of the examples in sap.common to sap.m but couldnt really figure it out.
    my XML project returns the error:FlightsSet' refers to an entity set and not to a single entity
    flightset is an entity in my gateway service.
    my oninit function looks like this:
    onInit: function() {
      var oModel = new sap.ui.model.odata.ODataModel("proxy/http/serveradress:8000/sap/opu/odata/sap/ZS_ELI_FLIGHT_PROJECT_SRV", false, 'user', 'pass', null);
        this.getView().setModel(oModel);
    the xml:
    <mvc:View
      controllerName="flightproject.TableView"
      xmlns:l="sap.ui.layout"
      xmlns:mvc="sap.ui.core.mvc"
      xmlns="sap.m">
      <Table id="idProductsTable"
        inset="false"
        items="{
          path: '/FlightsSet'
        }">
        <headerToolbar>
          <Toolbar>
            <Label text="Products"></Label>
          </Toolbar>
        </headerToolbar>
        <columns>
          <Column
            width="12em">
            <Label text="Flight company" />
          </Column>
          <Column
            minScreenWidth="Tablet"
            demandPopin="true">
            <Label text="Flight ID" />
          </Column>
        </columns>
        <items>
          <ColumnListItem>
            <cells>
              <ObjectIdentifier
                title="{Connid}"
                text="{Carrid}" />
              <Text
                text="{CITYFROM}" />
            </cells>
          </ColumnListItem>
        </items>
      </Table>
    </mvc:View>
    am i doing something wrong? thanks

    Hi Lavanya,
    If you are planning to use the TCP/IP destination on the SAP system in Register mode, then a siebel application has to register at the sap gateway using the <b>Program ID</b> given in the TCP/IP destination on the SAP system.
    In the TCP/IP destination the gateway options should contain the gateway host of the sap system and the gateway service. usually the gateway host is the message server itself and the gateway service is "sapgwXX", where XX is the <system_number>.
    Thanks,
    Renjith.

  • How to download and install SAP Net Weaver Gateway Plug-in for Eclipse?

    I have installed the SAP UI5 development tool kit for Eclipse. What else should I do? How can I download SAP Net Weaver Gateway Plug-in for Eclipse?
    After developing the application, should I run that with Apache Tomcat? How to get the access to database?

    you can find netweaver gateway tool from SAP Development Tools for Eclipse. and follow the installation instructions

  • How to find the Values of SAP Gateway Server Host  and Gateway Service Valu

    Hi All,
    I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
    Can any one plz suggest me how to find these values.
    Regds
    Phanikumar

    Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
    Have a nice week end, Luciano.

  • SAP Fiori "My travel and expenses"

    Hello experts
    I am missing a "how to" manual on SAP Fiori "My travel and expenses".
    Which components goes where, which notes should be applied, and is there any specifics regarding the actual activation and use through the launchpad?
    Best regards
    Simon

    Simon,
    Here it is. SAP Note.
    2011266 - FIORI Launchpad configuration for MyTravel And Expenses
    2008622 - Fiori app My Travel and Expenses : supplementary information for Travel Management OnPremise users

Maybe you are looking for