SAP Floor plan manager for webdynpro ABAP

Hi All,
The current version of SAP is SAP ECC 6.0. Following are the more detail patch levels.
SAP_ABA     700     0010
SAP_BASIS     700     0010
ST-PI     2008_1_700     0000
PI_BASIS     2005_1_700     0010
SAP_BW     700     0010
SAP_AP     700     0007
SAP_HR     600     0009
SAP_APPL     600     0007
There is no FPM_OIF_COMPONENT and IF_FPM_UI_BUILDING_BLOCK interface are not available.
When I see the cookbook it says FPM is available from NW 7.0 Ehp 1.
Can any one let me know how to get FPM functionality with minimum system disturbance. I dont think I can convince the company to upgrade to EHP 1 only for FPM. Any SAP note can provide the functionality ??
Thanks in advance, Points are assured.
Aleem.

>Can any one let me know how to get FPM functionality with minimum system disturbance. I dont think I can convince the company to upgrade to EHP 1 only for FPM. Any SAP note can provide the functionality ??
Sorry but for supported version of FPM, you must update to ERP 6.0 EnhP4 which contains NetWeaver 7.0 Enhancement Package 1. 
There were some parts of FPM delivered on NetWeaver 7.0 Support Package 14 and higher, but the delivery is not complet nor are the configuration tools very user friendly.  Therefore the offical support only starts with NetWeaver 7.01.
We can't provide large pieces of new functionality via SAPNotes.  That is why we have Enhancement Packages - to have a delivery mechanism for new functionality without having to go through a full upgrade.  If we put something as big as the FPM framework into a SAP Note, the note would effectively become an Enhancement Package.

Similar Messages

  • Floor Plan Manager in Webdynpro ABAP

    Hello,
    I want to create a Webdynpro ABAP Application based on FPM (Floor Plan Manager) and using UI BB(User Interface Building Blocks). Are there good tutorials/demos on the same.?
    Any help would be highly appreciated.
    Thanks.

    Hi
    Please go through this...
    it gives documentation.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/content.htm
    http://help.sap.com/erp2005_ehp_02/helpdata/en/4b/fbb33af3014fdcbde5df8c408cd8b1/frameset.htm
    How to create.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50
    https://wiki.wdf.sap.corp/display/FPM/Home
    and we have seperate forum for FPM.. check
    Floorplan Manager for Web Dynpro ABAP
    Hope it might help you,
    Thanks,
    Kris.
    Edited by: kissnas on Feb 17, 2011 6:11 AM

  • FLOOR PLAN MANAGER WITH WEBDYNPRO ABAP

    Hi All,
    How to learn FPM , please help me....and please send some doc's...
    Regards.
    Sunil B

    Hello Sunil,
    furthermore to the information above you can have a look into the official documentation within [SAP Library|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/content.htm]. After you have called the link, click on the small icon beside the top title and on the left-hand side a navigation panel will open with further FPM topics. Just open up the tree structure below FPM.
    Another very good info material is our [FPM Developer's Guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0d500f5-5205-2e10-43a6-dd023a5d0818], available on our official [SDN page for the Floorplan Manager|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/00b4312a-ac72-2b10-e0ad-e0219cfeb78e].
    Last but not least an offical FPM classroom training can be booked for the course [NET313|https://training.sap.com/de/en/course/net313-floor-plan-manager-fpm-for-web-dynpro-abap-classroom-092-en-en].
    Have fun and best regards,
    Julia

  • Exit Button in Floor Plan Manager for WD-ABAP

    Hi,
    I am trying to create an ESS application in WD-ABAP using FPM.
    I have created it as GAF. Everything is working fine, but I want to implement an Exit button functionality, same as in WD-JAVA.
    Once I click on Exit button it should take me to corresponding Subarea (I am using Home Page Framework).
    How can I achieve this.
    Any pointers in this regard will be a great help.
    Thanks
    Prashant

    Hi,
    Check the following link
    https://wiki.sdn.sap.com/wiki/display/WDABAP/ASimpleWebDynproApplicationtodisplayapdffileinthebrowser+window

  • Is there something wrong with with "Floorplan Manager for WebDynpro Abap"

    Hi,
    Seems like there may be something wrong with the forum
    [SAP Community Network Forums » SAP Solutions » Floorplan Manager for WebDynpro Abap |;
    no-one has got any p0ints (sorry for break but auto guideline logic is stopping the post) in the last 30 days - and it doesn't seem to be for lack of trying...
    [ref to thread where person claims not to be able to r3ward|;
    is this normal?
    Cheers,
    Chris

    Hello,
    And another thread in the same forum,
    [Thread: Change Close button translation in FPM screen  |Change Close button translation in FPM screen;
    where the person closing the thread has stated
    P.S. I did not see radio buttons for rewarding points. I don't how to do it then
    seems like there is some problem in this forum.
    Could you please investigate?
    Thanks,
    Chris

  • Floor plan manager in WD ABAP

    Hi All,
    Can you please tell me how to use Floor plan manager in WD ABAP.
    Thanks in advance.
    Sonia

    Hi Neha Agarwal,
    I have a webdynpro leave request application which is in Floor Plan Manager in Java webdynpro.
    My leave request java WD application has 4 different functional steps like view-> edit->review-> complete.
    User completes the steps one by one...and for that there are 4 screens--and user moves from one screen to another after completing each step.
    Now I made the changes in the edit view which has the duration field which needs to be filled with half of the work schedule allocated to the employee per day if they chose half day leave in the application.
    As per the requirement duration field populated the data(half of the work schedule allocated to the employee per day ) but when I hit review button,navigation goes to the next screen duration field has the value of full work schedule (say 8 hours)which suppose to be half of the workschedule .(say 4 hours).
    any clues ?what will be the root cause of this problem..............
    Higher points will be rewarded for the useful inputs.............
    Thanks in Advance,
    Dharani

  • Add text view using floor Plan Manager

    I have a very basic knowledeg of web dynpro ABAP. I'm working with the Floor Plan Manager for the first time. I have a requirement to add the 2 text view in the Sales order so that the user can maintain the comments and those will get saved along with the date time and the user id. Also the next time user can see all the previous comments in the one text view and add his own comments in the other text view. Can any body please help how to achieve this using the Floor Plan Manager?
    Thanks in advance!

    Hello Nilesh,
    Do you want to create a new FPM application or do you want to enhance the existing application?
    If you are planning for new FPM application then you need to create an webdynpro component and implement the IF_FPM_UI_BUILDING_BLOCK interface. And then in the component's view you can create the text views and write the logic to store/retrieve user comments.
    If you want o enhance the existing application, then you need to enhance the corresponding view and add the text views.
    Hope this helps. By the way there is a separate forum for "Floorplan Manager". You can post your FPM related questions there.
    BR, Saravanan

  • Floor Plan Manager Technique in Web Dynpro for ABAP

    Hi Experts,
    Road map technique and Floor Plan Manager Technique, both are same or different.
    I need to develop a web dynpro application based on Floor Plan Manager Technique. can I develop this application in WebDynpro for ABAP. If so please help me how to use Floor Plan Manager Technique in Web Dynpro for ABAP.
    I don't have knowledge in java, so i cann't develop this application in web dypro for java.
    Please help me.
    Thanks & Regards
    Sridhar

    >Road map technique and Floor Plan Manager Technique, both are same or different.
    They are different. The FloorPlan Manager is a tool for constructing WD applications with a similar layout and user interface.  There are two different floor plans currently - the OIF - Object Instance Floorplan and the GAF - Guided Activity Floorplan.  The OIF is for the editing of a single business object. It allows for things like the nesting of header and item details.  The GAF, on the other hand, uses a road map to walk you through an activity - much like a Guided Procedure.  The FloorPlan Manager is very powerful because it can be configured using component and application configuration - allowing you to plug in different UI Building Blocks (UIBB) as Web Dynpro Components or Views.  You can change the roadmap, for instance, adding a new step by just chaning this configuration and not having to touch the code.  Consistency between applications is also a major stregth of the FloorPlan Manager. 
    The Road Map is just a UI element in WD.  It can be used to create your own custom applications.
    >can I develop this application in WebDynpro for ABAP
    Sure.  The Floorplan manager has been available for WDA since SPS13.  Have a look at the packages APB_FPM_DEMO and ABP_FPM_TEST for examples of how to build components designed for the FloorPlan Manager.
    Admittedly there aren't a whole lot of documents available on the subject yet. Some eLearning is being worked on now.  There are going to be some workshops at TechEd on the subject:
    https://wiki.sdn.sap.com/wiki/display/Community/BringitallTogetherwithFPM%28FloorplanManager%29forWebDynpro+ABAP
    The best thing to do right now is to study the demo applications SAP provides.

  • WebDynpro ABAP u2013 Travel Management Floor Plan Manager Queries

    Hi,
    Travel Management in WebDynpro for ABAP uses FPM (floor plan manager).
    General Data View in FITE_VC_GENERAL_DATA component is being shared by Travel Creation component and travel expense as well.
    Can you please help to ans below queries?
    1 >>
    I want to know where exactly these configurations are done like
    When Create Travel Request button/link is clicked after general data, Review Component will be called and when Create Travel Expense button/link is called after general data it will go to a different component view.
    2 >>
    Also how visibility of button that comes from FITV_FPM layout view is configured in other component like in FITE_VC_GENERAL_DATA component and in FITE_VC_REVIEW component.
    3 >>  How would I include my own Z Component in existing FPM.
    4 >> when cancel button is clicked to terminate current application in travel management applications it takes us to starting point. Where configurations are done to direct it to other application/link?
    Regards,
    Madhvika

    No Ans

  • Web Dynpro for ABAP and Floor Plan Manager

    Hi.
    How can I integrate an ABAP Web Dynpro application in the Java Web Dynpro based Floor Plan Manager (FPM) framework? I'm thinking of the "General Information" page in the MSS Business Package (com.sap.pct.erp.mss.general_information), where the manager use the Employee Search iView com.sap.pct.erp.mss.generalinfo_employeesearch based on the Java Web Dynpro application sap.com/mss~eepro.GeneralInformation to select individual employees.

    Hi,
    See this link:
    Re: difference between web dynpro java and web dynpro abap
    *Also please have a look to this:
    *1) Web dynpro java/abap
    2) http://stackoverflow.com/questions/363523/java-or-abap-web-dynpro-sap-web-development-on-netweaver
    3) pros and cons for using Java Web Dynpro over ABAP Web Dynpro
    I hope this solves the issue!
    Thanks and Regards
    Pravesh
    Edited by: Pravesh Verma on Mar 26, 2009 12:21 AM

  • Can ABAP web dynpro floor plan manager integrate with adobe flex ?

    Hi All,
    Is it possible to integrate Web dynpro ABAP with adobe flex ?
    Can we integrate the standard ABAP web dynpro floor plan manager screen with adobe flex ?
    Brief about my requirement: I have refer few articals about  ABAP web dynpro is easyely integrate with adobe flex. My client is currently implementing SRM 7.0 for procure to pay process. For your information, standard SRM 7.0 are developed in ABAP Web dynpro floorplan manager. In my client,other processess such as order to cash, resource management etc screen are designed in Web dynpro Java(deployed in SAP EP) to make it more user friendly and good in resolution. My client is very much happy with SRM  7.0 business logic, however not happy with the standard SRM screen. They have asked to redesign SRM screen to make it more user friendly and good in resolution. 
    Thanks in advance. 
    Regards,
    Jennyfer

    It is possible to insert Adobe Flash islands in Web dynpro. You could take a look at the following link for more information on how to implement this:
    Adobe Flash Islands in Web Dynpro ABAP

  • Need help in Floor Plan Manager-ABAP

    Dear Experts,
    I am a beginner in floor plan manager and i am trying to  develop an exercise. I created a Test WD Component and also implemented the Interface for FPM . I changed the component name and Interface view to the FPM_OIF_COMPONENT and FPM_WINDOW respectively but when i create/change configuration, the configurator will start and i specify a new Application
    Configuration. And when i try to create new component configuration, I  dont know how to include my componentviews here..
    I am using the old FPM editor and dont know how to use it.
    Please suggest.

    Hi Sahil ,
    u wud like to study the Floorplan Manager framework. This is an SAP provided framework for Web Dynpro that is designed to help with combining multiple components together into one overall application using configuration.
    Floorplan Manager (FPM) Web Dynpro ABAP [original link is broken]
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/frameset.htm
    regards,
    amit

  • WebDynpro Services / Floor Plan Manager -- E-Rec

    We are trying to customize the candidate profile for the external candidate. The customer is on EhP4, SP4 and we use WD4A services.  Since the floorplan manager is being used, can you tell me how the custom is done and redeployed.
    I am not mentioning about new roadmap steps -- it is the changes being done  (fields being added / hide, etc) and being redeployed.
    You can also direct me to any resource that might be available
    Thanks again !

    Hi,
    the web dynpro applications used for the external candidates profile data maintenance in the candidates application wizard and the candidate startpage are not based on the floorplan manager. So it can be configured by creating application and component configuration via T-Code SE80 or by using the sap-config-mode=X URL parameter. The SE80 way is necessary if you need different configurations for different target groups or if you want to change the roadmap steps, too.
    The candidate overview (the WD application not the smartform) the recruiter accesses by clicking on the name in the different portal applications is floor plan manager based. For simple changes like hiding a single field I'd recomment using the url parameter too. For greater changes like restructuring the subviews you will use SE80 again only that here the OIF component is the entry point for the changes. In the component there should already by a standard configuration which you copy and then adapt to your needs.
    Kind Regards
    Roman

  • Floor plan Manager and POWL

    Hi,
    What is floor plan manager and POWL ?
    What is the difference between these two webdynpro component ?
    How developer decide which component(FPM or POWL) should be used for a particular development ?
    Thanks in advance.
    Regards,
    Simanchal Sahu

    Hi,
    Just FYI.
    6 series on User Interface flexibility in WebDynpro ABAP.
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
    ABAP UI Flexibility Part 1: Demo Overview
    ABAP UI Flexibility Part 2: Floorplan Manager
    ABAP UI Flexibility Part 3: Feeder Classes
    ABAP UI Flexibility Part 4: BADIs
    ABAP UI Flexibility Part 5: BRF+
    ABAP UI Flexibility Part 6: Looking Ahead to 7.02
    Regards,
    Masa

  • Why do we go for Webdynpro ABAP?

    Hi All,
             Why do we go for Webdynpro ABAP and How is it beneficial comparing with other technologies in SAP?
    Thanks
    Gopi.

    hi ,
    u may wish to like to go thru this WIKI
    http://wiki.sdn.sap.com/wiki/display/WDABAP/General+Issues#GeneralIssues-1.95
    in whch WD ABAP is compared with WD JAVA , BSP , JSP and HTMLB and mobile infrastrucutre .
    u may wish to go thru these WD ABAP tutorials :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/03/0048413e466e24e10000000a155106/content.htm
    Main Topic Page:
    http://sdn.sap.com/irj/sdn/nw-wdabap#section2
    Tutorials for Beginners:
    Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
    eLearning Videos:
    /people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
    go thru this quote by thomas
    The designers of WDA didn't want to lock developers into having to create an extra model layer. One of the values of WDA is that it sits closely with the underlying business logic and data. Therefore it can easily reuse existing function modules or classes (or even contain SQL directly - although this isn't recommended).
    There are different options for playing the role of model. You could create a faceless web dynpro component. This is sometimes used in large complex Floorplan Manager applications. However the cross-component context binding can represent a performance problem.
    More often a class is used as a simple model. These are called feeder classes in POWL. But really any ABAP class can be used to separate out the logic for the model. Data from this class can be accessed and then bound to the local context. Sometimes people use the Assistance Class as a model. It is possible to share a single instance of an assistance class between a hierarchy of components - making it an efficient way to share data.
    Of course there are the service call wizards. These aren't really models like in WDJ. Instead they are just shortcuts to generate context structures and code generators. However everything they generate can also be created by hand or altered after generation.
    rgds,
    amit

Maybe you are looking for