SAP Font Too Small While Takeing Print Out
Helo All...
This is regarding SRET reports. When I display SRET report, the font is OK, but when I take a printout , the font is appearing too small.
What could be the reason? and how to increase the font?
<<Text removed by moderator>>
Thanks...
Edited by: Matt on Nov 14, 2008 10:20 AM - Please do NOT offer points
hi friend,
Plz provide the details in ur report
which Function Module u can use for output?
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
or
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
& using any layout set in ur report?
Regards,
K.S.Kannan.
Similar Messages
-
Quantity doubling while taking print out
hi,
when a print out of invoice is taken for eg if the quantity is 50 and amount is 500 in invoice it is comming as quantity 100 and amount 1000, when the print out is taken for the second time every thing is comming correct, this is happening only for very few invoices not able to analyse the senario as it is not a happening regularly. but when we see the invoice document it is showing correct values.
please assist me in this senario how to get this fixed.
thankshi shakeer,
you have two options here:
1. limit your print outs it might get over right from one another.
2. DEBUGG the same and check the Program where went wrong
hope this clears your issue
balajia -
Dump(DYNPRO_MSG_IN_HELP) while taking print out in J1IA102.
Hi All,
While pressing the Print button in both the transactions its showing the following details:
ShrtText
Screen: Illegal message
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Error analysis
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPLJ1IEX"
Screen number............ 0001
Trigger Location of Runtime Error
Program SAPLSZA0
Include LSZA0F21
Row 30
Module type (FORM)
Module Name CHECK_PARA1_XOR_PARA2
FORM check_para1_xor_para2
USING para1
para2
check_type.
CASE check_type.
WHEN C_A_INDEX_A_NUMBER.
IF PARA1 = 0 AND PARA2 = SPACE
OR PARA1 0 AND PARA2 SPACE.
MESSAGE E052 RAISING PARAMETER_ERROR.
ENDIF.
WHEN c_a_handle_a_number.
IF para1 = space AND para2 = space
OR para1 space AND para2 space.
MESSAGE e053 RAISING parameter_error.
ENDIF.
>>> WHEN c_p_handle_p_number.
IF para1 = space AND para2 = space
OR para1 space AND para2 space.
MESSAGE e054 RAISING parameter_error.
ENDIF.
WHEN OTHERS.
ENDCASE.
ENDFORM. "CHECK_PARA1_XOR_PARA2
PLease help.
Regards
VIjjuHi ,
better to check for sap notes.
regards
Prabhu -
SAP printout too small after changing printer
I have one problem with the report printout in SAP. Before changing printer, we will using HP LJ 6P. The printout is fine. After changing printer to HP LJ P2035, the printout is very small. Only 1/6 of the A4 paper. Anyone can help?
This is printer driver issue. First check PLD document property to see what printer is selected.
Thanks,
Gordon -
Why is the printed font so small on a print job I send from my email to my new HP Photosmart C510
Why is the printed font so small on a print job I send from my email to my new HP Photosmart C510? I sent it via HP ePrint from a lotus notes based email account. It was just a text message but it was so small on the print out I could not begin to read it.
Thanks
MattAt the document you plan to print, go to "file" in upper right corner. Select "print preview". Atop that window, select font size. Recommended minimum 60%. May need to adjust with different documents.
Good luck! -
How to use the t-code vf31 tor taking print out of invoice
Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venuHi,
Please find the steps
Output type RD00
Transmission medium 1
Sort order 01
Processing mode 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla -
Pages button in printer dialog box is deactivating while taking print ?
Hello exports,
while taking print abap reports (developed using smartforms) pages buttoon (from- to) in printer dialog box
is by default is deactivating .How to activate this button ? who will do this one (Abaper or basis guy).
pls help me in this.Hi,
So, as you see a field "from ... to ...", I think you are talking about the "background print parameters" dialog (this is not the smart forms print dialog, which contains field "page selection").
I don't understand. "Pages from ... to ..." is always displayed, and the user can enter them manually. Do you want to enter pages programmatically?
What is your code or the steps to display this dialog? Is it fully standard or do you use GET_PRINT_PARAMETERS programmatically?
Sandra -
My iPad IOS5 apps badge font too small to easily read (for me). How can I make it larger? It was larger and much easier to read on IOS4.
press [ctrl] + [+]
More details: [[page zoom]]. -
New events I create in calendar have a font too small to read. How do you change the front size?
I'm having the same issue. Did you get an answer? Seems that calendar entries created within Outlook on my laptop are fine, but entries created on my iPhone have a very tiny font. changing default font in "Settings - Display and Brightness" does not help. Thanks.
-
Font is small while printing alv list report
Hi,
while printing ALV list report font is too small, can you tell me where i can increase the font size. I tried in GUI font ,In which i can increase the font for GUI, not for ALV priniting . Can any body help me to solve this problem?
Regards,
siva kumarHI Kushboo,
I think You are talking about header text in ALV , while printing ALV list i need to increase all the font size.. In fieldcatlog there is no option called Style...for increasing ALV font line item details. Can you tell me which style you are talking about?
Regards,
siva kumar -
E-mail messages print font too small display font too big
I recently upgraded to OSX 10.4.9 and tried to print an e-mail message.
The message printed in microscopic sized font and I followed the suggestions on the HELP section about increasing font size.
With display font set at 24 the printed message is just barely readable. However, this is unacceptable for display purposes and actually still too small for printed copies of the message.
I connect to an Epson CX4600 printer as a network device on my Apple AirPort Extreme card.
What can I do to print acceptable copies and not have to tinker with the display font every time I want to print?
iMac Mac OS X (10.4.9) Printer Epson 4600I tried all the options in Help File in Mail Printing Email Messages
Options were "keep the same apparentfont size" didn't change a thing.
Scale message to fit = result was smaller size font,
Rewrap message to fit, didn't change a thing.
I still can't print out a readable copy of the email.
This particular Email wouldn't even copy correctly into Word so that I could adjust it there, it kept getting cut off and I changing the margin tabs didn't help either. -
I tried using iCal for the first time.
I can't read the fonts on my 30" monitor without strong magnification. No one here can read the fonts easily, even those with excellent eyesight.
How can I enlarge the fonts without using the Universal Access magnification, which makes everything unsharp and gives me a headache?
Thanks,
BTW, when I enlarge the fonts for these forums, the lines run into each other. Can that be fixed? Or is that a problem with the site?
I use Safari.
Thanks again,
Mark B AnstendigI appreciate the help.
Unfortunately, changing resolutions on LCD is about the same, unsharpnesswise, as using the zoom feature in Universal access.
The ability to choose font size, font color, etc., was available in ODS 9 and previous, and should be available to us as a part of the system.
That it isn't and that, with typical native resolutions for LCDs fonts and all detail size is seen at about half WYSIWYG (half the printed-out size) is a huge fault of the Apple OS.
We are stuck with too small fonts and details in too many applications, windows, toolbars, etc.
I need to enlarge the fonts in iCal, without messing anything up like Universal access does. Otherwise, I cannot use it, nor can many people i know. Ity is that simple!
Any real solutions, not makeshift attempts at trying to help.
Thanks again,
Mark B Anstendig -
I downloaded the book Software Engineering for Internet Applications from Ebsco via my local library. I have a 7 day check-out. The fonts are WAY too small and clearly don't match what they are supposed to be since the pagination appears to lock the amount of text on the page and the text then occupies about 25% of the page. There are no "a" and "A" options on the toolbar so I think I am dealing with a pdf, not the flowable book format, EPUB.
I then downloaded the free Philip K. Dick short story which is EPUB and that font was fine with no need for me to modify. I then downloaded "The Geography of Bliss" which also appears to be EPUB, font is fine, margins are so tiny that black text crowds up against black digital editions borders for a verrrrry ugly experience.
This is my first attempt to use Digital Editions. Is this the expected user interface? Because, quite frankly, it's enough to put one off of Digital Editions forever!
I am running W7 64 bit and downloaded DE through Firefox 6.0, not that that should matter.
OK, went back to the free downloads and found Huckleberry Finn in PDF ebook format and that is working fine.
So, is the problem with the book: Software Engineering for Internet Applications?
If I go back to EBSCO, what do I tell them? Book was formatted incorrectly and needs to be *what* recompiled??
Thanks,
MI would look at the ebook's format first. You can do this in ADE's Library
mode by displaying the 'Item Info' on the ebook itself. You can display the
library in either of two ways (thumbnail or list), and there will be a small
arrow next to the upper left corner of the thumbnail, and on the left hand
side of the Title in list form. If you put your cursor on that arrow,
you'll see a drop-down box that has 'Item Info' as a choice. Click on that,
and a window will open up, containing information about the ebook. About
halfway down, you'll see an entry with the 'File Path'. You'll see the
ebook's title and its format - .pdf or .epub or .htm.
I think your 'clue' of whether there were options on the tool bar for font
size will be confirmed if the ebook is a .pdf. Some can support variable
text size, but most do not. There's not much the library can do about this
either - the compilation is done by the publisher. However, it's possible
that the library has a copy that's in epub format. Many publishers have
more than one version available.
Hope this helps!
================ -
I received my N9 three days ago and i am so disappointed at the font size. The fonts are way too small and totally unacceptable! I sold my Nokia 700 because the font on that device was so small i just couldn't use it and bought the N9. I figured the N9 with its 3.9" screen the font size would be comparable to the iPhone 4 but boy was i wrong. The fonts on the iPhone 4 are so much bigger! i purchased both the 700 and N9 online so i had no way of knowing the font would be so damn small.
Why are the fonts so small for SMS Messaging?
Why are they so small on the missed call/sms lock screen?
Why is the date on the lock screen so small?
The software guys at Nokia know how to fix this but they refuse. It's not that hard for them to do it. This font size shouldn't even be an issue if they took the time to properly develop the OS for it. I've even heard the Lumia 800 has small fonts.
I've been a loyal Nokia customer for years having owned a 6300 and C3-01 before because they build quality products except this font issue is driving me nuts! Am i supposed to sell my N9 and get an Iphone now?
NOKIA PLEASE ADDRESS THIS ISSUE ON YOUR NEXT UPDATE! MAKE THE FONTS BIGGER! ITS GOT A 3.9" SCREEN FOR CRYIN OUT LOUD!!
Moderators notes: Post edited as it contained information which was off topic and unfounded.pj98 wrote:
Please update to PR1.2 when available, it contains some changes to improve the readability of the UI texts.
the fonts in pr1.2 are smaller than pr1.1.
it is not so much that they are actually "smaller" as the css files in the device show them being the same, with exception to the lockscreens (those were made smaller), but the issue is more with the font style that they changed it to.
someone go and grab a wp7.5 device and then hold your nokia n9 on pr1.2 next to it. the fonts are closer in likeness now unlike the pr1.1.
so the new fonts are a "thinner" look to them, making them seem smaller. but they are more "crisp"
I changed my fonts to script, and even with the settings in pr1.2, they are the same as pr1.1, so it is the font, and not the "size" -
Yosemite fonts too small for middle aged eyes
I just updated my desktop to Yosemite and am wishing I hadn't - the designers clearly don't have a clue what happens to normal eyesight in middle age. I am NOT vision impaired - just a little bit short-sighted (-1.5) and a little bit long-sighted (+1) and a little bit astigmatic, with up-to-date glasses that correct my sight properly. I am nonetheless finding using this new OS on my new 1920x1080 (non-Apple) monitor, which worked perfectly with Mavericks, absolute torture - all the text in menus, settings screens etc is just much too small for comfort, at least in the chosen font. In some apps I can use Cmd-+ to increase the font size, but there seems to be nothing I can do about the font sizes in Finder, Preferences etc
I have read the threads about the reasons and ways to mitigate the problem, and have increased contrast and reduced transparency in the Accessibility settings, and am considering running the script to change the default font back to Lucida Grande. But my point is that I have perfectly normal eyesight (for someone of 53) and have never had any screen problems before, so I shouldn't need to be using the Accessibility settings. I know it is fashionable among designers to create lots of blank white space, but white space doesn't compensate for illegibility!
I can see from all the threads on this topic that I am not alone. So please Apple, sort this out - usability must come first - and not just for the under 30s!Even iBooks on MBP Retina !?
I love the iBooks app and use it specifically because of the "Night" appearance option, which turns the page background all black and the font white (similar to inverting the display). Fortunately books' font sizes remain adjustable as big as I want, but - I can no longer see page information (current page number and number of pages left to read) at the bottom of each page. The page information is barely visible (appears like small dark grey foggy font on a black background). This is very likely also the result of the Yosemite font fiasco. Not an issue when reading books in "Night" appearance on the iPad, (they didn't break it yet yet in iOS).
"Digital Books without page numbering information"!
A Huge design fiasco.
Maybe you are looking for
-
Cannot load media from organizer into premiere elements 9.0
I have spent the majority of the day trying to load media into a new project in premiere elements to edit the video. When I select the video and click edit in premiere elements, premiere opens but no media is available. It never loads the videos. I c
-
my zen micro is unfortuantely out of the 90 day free service warantee. it was definately one of the first batch ones, cuz its the old style menu and i got it basically the day it came out. #, how do they charge you for the service fee #2, what do i g
-
Apple aware of video problem in the new Intel iMacs
Macworld Daily News Thursday - February 09, 2006 Apple investigates Intel iMac Front Row problems By Macworld staff Apple has confirmed it is aware of, and investigating, reports of video problems in the new Intel iMacs. Recent reports claimed that s
-
QT 7 jerks when sometimes playing back mp3 or avi file. I have to restart the system to get QT playing smoothly. This happens to other players as well (real, VLC and WMP). This mainly happens in G4 733MHz. Anyone knows what causes this and how to avo
-
have got some externe vst and plug in, how can i use or set them up