SAP for Healthcare Industry

Hi Folks,
I am new to this community as well as SAP. I have a master degree in Life science and having Five yrs of Sales and marketing exposure for the same.So i would like to build my carrier in SAP please suggest which module would be suitable for me and how much exposure i can have.
Any suggestion related to this is welcome.
Thanks

Hi Atif,
My requirement is :
1) My client is into Healthcare.. For each patient with insurance cover we are debiting insurance company for the amount due towards his services provided by the client.
2) on periodic basis client submits claim file to insurance company.
3) insurance company does the remittance to the client and sends an xml file.
4) This xml file contains individual patients records which are remitted by insurance company.
5) I want to clear these open items.. Please let me know the best method of doing it..
6) Is there any method of automating this process.
Thanks
Sivaram

Similar Messages

Business Flow in SAP for courier Industry

Hi,
anted how will the business activities flow in SAP for a courier industry configuration.
The complete scenarion from receiving a call from Customer in a call centre / directly by route agent to collection with status management and thereafter repacking for transfer to another HUB or distribution from the centre directly along with FI.
Request to please send me the complete process mapping in SAP.
Rgds,
Rajeev

Dear Rajeev,
This courier concept is mapped in SAP through Service Notifications in Customer Service module.
The Service Notification which is attended by the Call center has to be linked through the Action Boxes by configuring it whether or not to be notified to the concern Pick up / Delivery Agents by a pager or sms to their mobile and inform about this to the customer also simultaneously.
For this some ABAP requirements will be there. Some of the Action boxes configuration need to set the workings via ABAP coding.
Again each notification status will be updated based on the actions taken for the process number.
The entire process scenario, you can get from the Customer Service Module.
Hope this helps.
Thanks and regards.
Augustine Ponraj

SAP for Sugar Industry

Hi
I am working as SAP PM in a renewed US Group of Companies. After SAP deployment in two group companies we are extending SAP to our group sugar units.
Expert opinion required,
Which one is best to map Sugar production from Sugar Cane? & Why.
1) PP-PI
2) Repetitive manufacturing
3) Process Industry
May be a reference Business Blueprint of SAP PP module for Sugar manufacturing will helpful for me to understand the things.
I will keep it to my own.
Thankful indeed.
James

Dear James,
Check these links and I hope many of our experts have suggested for PP-PI,check these once and then
decide.
sugar industries
Re: PP PI or REM?
PPPI or REM for Sugar industry
Regards
Mangalraj.S

SAP for Retail Industry

Hi Experts,
Could anyone tell me is there is any specific module in SAP fo Retail Industry.What is the reach of SAP in the retail market??For ex:a big retail stores like Walmart,costco...are they using SAP????

Hi,
Ofcouse , SAP has good practice in Retail industory .For more information you better contact SAP Marketing associates.
http://help.sap.com/content/documentation/industry/docu_is_retail.htm
http://help.sap.com/content/documentation/industry/docu_is_retail_retail.htm
with rgds,
Anil Kumar Sharma .P

Business senarios for shipping industry ........

Hello Gurus ....
                  want help from you ..
                  what is the senarios in sap for shipping industry (cargo)
                  is comes under sap-scm or logistic service provider
                  please describe me the sales & distribution functionality in shipping industry ....means i am confused abut the sd
                  senarios & scope for shipping indusrty .
                   awaiting for your valuabe reply
                   tahnks

i could'nt get any ans ........

SAP best Practice for Construction industry in GCC countries

Dear Pals
Pleas let me now the link for the SAP Best Practice document for Construction industry in GCC countries.
Thanks & regards
Rajaram

Hi,
Try the link gien below:
http://help.sap.com/bp_bl603/BL_AE/html/index.htm
Regards,
Amit

"Cleaning Validation Process Scenario" in SAP QM/PM for Pharma Industry

Dear Gurus,
I have a client requirement in the Pharma Industry. The scenario needs to be mapped in SAP for which I need your help.
The scenario is that the company is making medicines (tablets/capsules). Whenever, there is a changeover of the product, there are certain regulatory requirements which the client needs to adhere to.
For example, a shutdown of machinery for 10-12 days may be planned during which the machines are cleaned with soap/cleaning agents. Now, during this cleaning process, the QA department would take samples of the soap water recovered after cleaning process. These samples would be inspected for residues of the previous product that was being run on the line.
If everything is ok, then the approval is given by QA to start the next product.
This process has to be mapped in SAP, maybe in QM or PM.
I thought over the following process. Please let me know your inputs to fine tune the below process -
1. As the shutdown for changeover will be a planned one, we can create a Maintenance Plan in IP42.
2. Schedule the Mantenance Plan by IP10.
3. Release the maintenance plan in IP10.
4. Preventive Maintenance order will be created. (Also assign an Inspection Type in config to this maintenance order so that inspection lot also is triggered. The doubt here is that the inspection lot would be triggered for all preventive maintenance orders which may not be required. How to control this?)
5. Carry out Result Recording in QA32.
6. Confirm Preventive Maintenance order in IW41.
7. Carry out Usage Decision in QA32. The status of order will now become TECO.
8. Order Settlement in KO88.
9. Business Completion of Order in IW32
Thanks for you time!
Regards,
Nitin

Your ASIS Process
1. Cleaning is done by maintenance before change over
2. Inspection is done to ensure that cleaning is acceptable
3. Records of inspection are to be maintained
4. Information is to be sent to concern regarding quality testing and its status
5. Change over performed
You can MAP this by Notifications also. Follow the steps
1. Create a new notification type ( config)
2. Ensure you have following mapped in the action box (config)
    a. Send a mail
    b. Create a inspection lot
    c. Create a QM order
    d. Close Notification
The process will be as follows
1. Create a dummy material and activate insp type 08 in the QM set up.
2. PM creates the notification (t-code QM01) (New notification & triggers a mail (Action box) which is delivered to QC as information regarding the start of process .
3. QC on looking at the information creates the inspection lot through the notification (action box) the QTY specified in the notification is moved from unrestricted to Quality .
3. Perform RR & UD and post stock to unrestricted
4. Close the notification giving your remarks or set the notification for further processing if required .
Note :
1. The material is a dummy material
2. The intial stock can be one qty which is posted to quality -
from unrestricted and then again to unrestricted.
Deepak

"Cleaning Validation Process Scenario" in SAP PM/QM for Pharma Industry

Dear Gurus,
I have a client requirement in the Pharma Industry. The scenario needs to be mapped in SAP for which I need your help.
The scenario is that the company is making medicines (tablets/capsules). Whenever, there is a changeover of the product, there are certain regulatory requirements which the client needs to adhere to.
For example, a shutdown of machinery for 10-12 days may be planned during which the machines are cleaned with soap/cleaning agents. Now, during this cleaning process, the QA department would take samples of the soap water recovered after cleaning process. These samples would be inspected for residues of the previous product that was being run on the line.
If everything is ok, then the approval is given by QA to start the next product.
This process has to be mapped in SAP, maybe in PM or QM.
I thought over the following process. Please let me know your inputs to fine tune the below process -
1. As the shutdown for changeover will be a planned one, we can create a Maintenance Plan in IP42.
2. Schedule the Mantenance Plan by IP10.
3. Release the maintenance plan in IP10.
4. Preventive Maintenance order will be created. (Also assign an Inspection Type in config to this maintenance order so that inspection lot also is triggered. The doubt here is that the inspection lot would be triggered for all preventive maintenance orders which may not be required. How to control this?)
5. Carry out Result Recording in QA32.
6. Confirm Preventive Maintenance order in IW41.
7. Carry out Usage Decision in QA32. The status of order will now become TECO.
8. Order Settlement in KO88.
9. Business Completion of Order in IW32
Thanks for you time!
Regards,
Nitin

Hi,
For multiple samples we can use no of sample(SAmpling Procedure) to record more than one results and system will calculate the arithmetic mean of all results of all sample
For this we have to maintain control indicator of MIC . Single result radio button will enable us to record results based on the number of sample defined in sampling procedure
And if you have requirement like different target values at different level,
Then you can configure inpection point -
SPRO > Quality Management > Quality Planning > Inspection Planning > General > Define Identifier for Inspection Points
in this Field act - 2 and give description
Regards,
SandeepV

SAP BP for forging industry

Hi,
is there any SAP BP avilable for forging industry specific.
kindly any body respond.

Hi shiva,
thankyou for ur replay, i want to know is there available any BESTPRACTICE PACKAGE all-in-one (ECC.6.0) FOR FORGING INDUSTRY

What is the Best practice for ceramic industry?

Dear All;
i would like to ask two questions:
1- which manufacturing category (process or discrete) fit ceramic industry?
2- what is the Best practice for ceramic industry?
please note from the below link
[https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000409682008E ]
i recognized that ceramic industry is under category called building material which in turn under mill product and mining
but there is no best practices for building material or even mill product and only fabricated meta and mining best practices is available.
thanks in advance

Hi,
I understand that you refer to production of ceramic tiles. The solution for PP was process, with these setps: raw materials preparation (glazes and frits), dry pressing (I don't know extrusion process), glazing, firing (single fire), sorting and packing. In Spain, usually are All-in-one solutions (R/3 o ECC solutions). Perhaps the production of decors have fast firing and additional processes.
In my opinion, the curiosity is in batch determination in SD, that you must determine in sales order because builders want that the order will be homogeneus in tone and caliber, and he/she can split the order in diferents deliveries. You must think that batch is tone (diferents colours in firing and so on) and in caliber.
I hope this helps you
Regards,
Eduardo

SAP PP - Poultry Industry

Hi All,
Can anybody tell me, where can I have information regarding --
SAP PP Implementation for Poultry Industry
I think there is one implementation in such industry.
Please do the needful.
Thanks in advance.
GNK

Dear,
SAPu2019s commitment to poultry industry also,
Please check the link,
[Poultry Industry|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09d647e-ee23-2b10-eea9-efe96bd6e950]
Regards,
R.Brahmankar

PI sheet for pharma industry - step by step customization required very urg

Hi,
We are implementing sap PP-PI for pharma industry.Can some one please send some good document explaining the customization for PI sheet , custom pi sheet .
any help is gretaly appreciated.
sonia

Hi,
Please check with following Baseline Buliding Block link provided by SAP. Here u can select industry type and contry type.
<b>http://help.sap.com/bp_blv1470/BL_UK/index.htm</b>
i hope this will help.
regards
pardeep

Best Practices for Chemical Industry

I am searching for documentation for Best Practices Package for Chemical Industry
e.g. file SMB18_XK15_O002_Q36_01.TXT but could not find it on SAP Marketplace.
Can someone hint me where i can get those files.

Yogesh,
I suspect that the exact file you are looking for was part of an earlier release.
Why not just download the latest version?
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001465742009E
US version/zip file format..
Best Regards,
DB49

Standerd BI Content DataSources and Cubes used for Cement industry

HI,
    Kindly any one sugest the list of standerd BI Content DataSources,
   and standerd BI Content Cubes used for Cement industry
   related projects.
Standerd BI Content Datasources and cubes for modules
SD, Product costing , Inventry, and GL.
Kindly Sugest.
Regard,
prasad.

Hi,
You can use normal InfoCubes/DataSource for the Cement Industry, recently I saw the design of the Cement Industry BI system, there also same InfoCubes and DataSourecs they used.
For Cubes and DataSource details see in SDN..
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Thanks
Reddy

3PLS Scenario for Service Industry

Hi All,
How do we map SAP B1 Solutions for service Industry.
Scenario 1.
My client gives warehouses on rent to their customers to store their Inventory. My client provides the Labour required for that particular warehouse and transportation if required.
Scenario 2. (3PLS) (Third Party Logistics Services)
My client takes warehouses, Labour and Transportation on rent from Vendor and gives to customer on Rent. Their customer stores their inventory in that warehouse.
My doubt is that can we maintain customers inventory at out client place. if yes, How to map the scenario.
Regards
Shashi
Edited by: shashi mantripragada on Jun 29, 2009 12:24 PM

Hi,
We can have work solution for this service process mapping.
Any work around solution in B1 there has to be financial implication on that. So we have to be very careful on defining GL Account Determination and its financial implication.
And that will be accounted in our books of accounts.
Here we will receive only charges out of from the services, what we have to given the service to them, for this we will do service invoice (AR Service Invoice) to account those charges.
For Inventory Tracking what we need to do is to pass the goods receipt or goods issue document with out the item cost. Here we have to assign inventory account and inventory off set account and we need define an item for to maintain a stock and also the warehouse and Item Group which we are going to maintain a stock. All are the document involves financial implication.
Charges should be accounted through service invoices and inventory tracking should go through goods issue and goods receipt document (Inventory Transaction in Inventory Module) .
Please consult a Finance person before going to do that these configurations. But it is possible in B1.
Thanks and Regards,
Senthil Maruthappan.
Team Work Never Fails.

SAP for Healthcare Industry

Similar Messages

Maybe you are looking for