SAP from Remote

Dear All,
I want to use my SAP from Remote area I have SAP router installed & i m using the same, but i want below setting in GUI Panel to use SAP from remote area.
Description - PRoduction
Application Server - 27.106.18.66 - my Public IP
System No - 00
System ID - PRD
SAP Router String - -
dont want to use.
Please suggest if any settings in SAP.
Regards,
Jitendra.

Nope. There is no setting required in SAP. If you are able to telent with your Public IP with message server port. You would be able to login without Router string.
Regards,
Subhash

Similar Messages

Number of remote RFC connections to SAP from third party application

Hi All,
We are using an external application which is using the JCO API to make a connection to the SAP server to pass invoices. But the connections are note properly closed after invoking the RFCs and SAP seems to be not able to handle further requests once the numer of connections reach the maximum limit.
Could you tell whether there is a max limit on the number of connections opened to SAP from remote function calls from a third party product?
Is there anyway by which we can make sure that connections are properly closed in SAP after the each remote call?
Thanks in advance for your pointers.
Regards
Arun

Dear Arun,
Here are the parameter settings which you can do to set up RFC connections to SAP servers.
http://help.sap.com/saphelp_nw70/helpdata/en/c3/ce70a5cf0ab1499bfbf464e6e92de0/frameset.htm
This will resolve all your problems.
Thanks & Regards
Vivek

SAP Training from Remote (Internet based)

SAP Training from Remote (Internet based)
Instructor Mr. Nanda Kishore
§     IIT engineer with 10 years of SAP specific training experience
§     Trained hundreds of students now well placed in BIG 4 consulting firms
§     Official trainer for companies like Infosys, Triniti, Coconut and Emcure
§     Experienced in ABAP, BW, XI
Upcoming Training session - SAP ABAP
Batch starts August 13, 2007
Highlights
§     Rigorous curriculum
§     Techno functional perspective to ABAP development
§     Real time scenarios
§     Graded assignments
Target Audience
§     Recent graduates seeking to start a career in SAP
§     Programmers looking to transition to a promising career with SAP
§     Functional consultants or Industry process experts looking to enhance their ABAP programming & debugging skills
Testimonials
Great experience being taught by an IITIAN.I think my IQ increased after getting trained by him and I had offer from two companies Accenture and Bearing Point. He prepared me so thoroughly for client interview and life afterwards that not only I got selected in my first interview but till date I could not find a better consultant than myself. I am currently working as a senior consultant in Bearing Point. Arshad
Excellent trainer with great depth of knowledge. His exercises and curriculum are both very challenging. The whole training was a blast and there was an exponential increase in my knowledge all throughout the course. Hemant, EDS employee
I always use to think that I will some day jump to SAP technologies but with two kids I never had the energy and the stamina to change to SAP till I met Kishore. My income jumped up in six months time. Today I am a team lead with a big pharmaceutical company. Mr. Kishore is the one who fully helped me change my career path. Saurav
For more information (fees and connectivity) contact
Email: [email protected]
Tel: 732-529-4188

Hi,
All mentioned options are possible to access SAP Business One, like:
Static IP address for SAP B1 server
Citrix (application or remote desktop)
VPN (you can even setup a simple PPTP, L2TP or OpenVPN). But please be aware that VPN is not recommended by SAP way of connection to ERP systems
There is the fourth nice alternative to avoid VPN and RDP in case you can't use both of them (because of, for instance, local network security settings that blocks you to setup a connection). You can setup HTML Clientless RDP connection at your main server of the remote network (it is even not necessary your SAP B1 server, you should do it on the main machine that has static IP):
Guacamole - HTML5 Clientless Remote Desktop
In this case you will get the RDP connection to your client or server machine with SAP B1 from any kind of network and any kind of device with no additional client setup. It is even work from the mobile phone, but, of course, the screen it too small
Here is how it looks like (in my local browser):
Kind Regards,
Siarhei

From Sap to Remote Unix Server

Hi,
I have to send a file from an internal table to a remote unix server. i have tried a lot appling FTP with a put command but its still not getting transported.
please help me out.and also tell me wheather i can use some other way to do this.
also tell me wheather there are some issues of authorisation in this....
please help me as early as possible.. i am in a real need.. i promise to revert back with points...

I HAVE TO SEND A FILE FROM OUR SAP TO REMOTE UNIX SERVER.
FOR THIS PURPOSE I AM USING FTP, BUT STILL I AM NOT ABLE TO DO THAT..
PLEASE HELP ME OUT ON THIS..
BELOW I AM GIVING MY CODE PLEASE HAVE A LOOK AT IT AND TELL ME WHATS WRONG.
REPORT ZIZSFPB001 .
TABLES : ZISFP03.
CONSTANTS: C_DELIMETER(1) TYPE C
                          VALUE '#'.
TYPES: BEGIN OF TY_FREIGHT,
                VENDOR      TYPE ZISFP03-VENDOR,
                LR_NO       TYPE ZISFP03-LR_NO,
                EBELN       TYPE ZISFP03-EBELN,
                LR_DATE     TYPE ZISFP03-LR_DATE,
                PO_DATE     TYPE ZISFP03-PO_DATE,
                PO_BRANCH   TYPE ZISFP03-PO_BRANCH,
                TRK_NO      TYPE ZISFP03-TRK_NO,
                DISP_TIME   TYPE ZISFP03-DISP_TIME,
                SCAN_NO     TYPE ZISFP03-SCAN_NO,
                ACTU_QTY    TYPE ZISFP04-ACTU_QTY,
                MATERIAL    TYPE ZISFP04-MATERIAL,
                GR_BRANCH   TYPE ZISFP04-GR_BRANCH,
                STDTIME     TYPE ZISFP14-STDTIME,
                EST_ARRV_DT TYPE ZISFP04-ARRV_DT,
       END   OF TY_FREIGHT.
TYPES: BEGIN OF TY_FTP,
                FIELD(90) TYPE C,
       END   OF TY_FTP.
DATA: IT_FREIGHT TYPE STANDARD TABLE OF TY_FREIGHT,
      IT_OUTPUT TYPE STANDARD TABLE OF TY_FREIGHT,
      IT_FTP     TYPE STANDARD TABLE OF TY_FTP.
DATA : BEGIN OF TABL OCCURS 0,
       LINE(560),
       END OF TABL.
DATA: WA_FREIGHT TYPE TY_FREIGHT,
      WA_OUTPUT TYPE TY_FREIGHT,
      WA_FTP     TYPE TY_FTP.
DATA: W_DSN             TYPE SXPGCOLIST-PARAMETERS,
      W_FTP_DSN         TYPE SXPGCOLIST-PARAMETERS,
      W_PARCOM_LOC(150) TYPE C,
      W_FNAME(16)       TYPE C,
      W_ERROR_FLAG(1)   TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_LR_DT FOR ZISFP03-LR_DATE.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM TRANSFER_DATA_TO_FILE.
PERFORM FTP_TRANSFER.
*&      Form GET_DATA
      text
FORM GET_DATA.
SELECT A~VENDOR
         A~LR_NO
         A~EBELN
         A~LR_DATE
         A~PO_DATE
         A~PO_BRANCH
         A~TRK_NO
         A~DISP_TIME
         A~SCAN_NO
         B~ACTU_QTY
         B~MATERIAL
         B~GR_BRANCH
         C~STDTIME
    INTO TABLE IT_FREIGHT
    FROM ( ( ZISFP03 AS A
   INNER JOIN ZISFP04 AS B
      ON AVENDOR = BVENDOR
     AND ALR_NO = BLR_NO
     AND AEBELN = BEBELN )
   INNER JOIN ZISFP14 AS C
      ON AVENDOR = CVENDOR
     AND APO_BRANCH = CFROM_LOC
     AND BGR_BRANCH = CTO_LOC
     AND AZMODE = CEXPRES_TY )
   WHERE A~LR_DATE IN S_LR_DT.
IF SY-SUBRC EQ 0.
    SORT IT_FREIGHT BY VENDOR LR_NO EBELN.
    DELETE ADJACENT DUPLICATES FROM IT_FREIGHT.
ENDIF.
IT_OUTPUT[] = IT_FREIGHT[].
ENDFORM.                    " GET_DATA
*&      Form TRANSFER_DATA_TO_FILE
      text
FORM TRANSFER_DATA_TO_FILE.
MOVE 'createnew.txt' TO W_FNAME.
CONCATENATE '/usr/sap/trans/mmpp/' W_FNAME INTO W_DSN.
OPEN DATASET W_DSN FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
    WRITE : 'File open error occured.'.
    STOP.
ENDIF.
LOOP AT IT_OUTPUT INTO WA_OUTPUT.
    TRANSFER WA_OUTPUT TO W_DSN.
    CLEAR WA_OUTPUT.
ENDLOOP.
IF SY-SUBRC NE 0.
    WRITE : 'File write error occured.'.
    EXIT.
ENDIF.
CLOSE DATASET W_DSN.
ENDFORM.                    " TRANSFER_DATA_TO_FILE
*&      Form FTP_TRANSFER
      text
FORM FTP_TRANSFER.
PERFORM BUILD_FTP_FILE.
PERFORM TRANSFER_FTP_FILE.
ENDFORM.                    " FTP_TRANSFER
*&      Form BUILD_FTP_FILE
      text
FORM BUILD_FTP_FILE.
W_FTP_DSN = '/usr/sap/trans/mmpp/createcheck.txt'.
CONCATENATE 'open'
              'www.info.com'
         INTO WA_FTP-FIELD
    SEPARATED BY SPACE.
APPEND WA_FTP TO IT_FTP.
CLEAR WA_FTP.
CONCATENATE 'user'
              'myusername'
              'mypassword'
         INTO WA_FTP-FIELD
    SEPARATED BY SPACE.
APPEND WA_FTP TO IT_FTP.
CLEAR WA_FTP.
CONCATENATE 'cd'
'/oracle01/oracle/product/iSuites/Apache/Apache/htdocs/etrans/user/upload/'
INTO WA_FTP-FIELD separated by space.
APPEND WA_FTP TO IT_FTP.
CLEAR WA_FTP.
MOVE 'put /usr/sap/trans/mmpp/createnew.txt' TO WA_FTP-FIELD.
APPEND WA_FTP TO IT_FTP.
CLEAR WA_FTP.
MOVE 'close' TO WA_FTP-FIELD.
APPEND WA_FTP TO IT_FTP.
CLEAR WA_FTP.
MOVE 'bye' TO WA_FTP-FIELD.
APPEND WA_FTP TO IT_FTP.
CLEAR WA_FTP.
OPEN DATASET W_FTP_DSN FOR OUTPUT IN TEXT MODE.
LOOP AT IT_FTP INTO WA_FTP.
    TRANSFER WA_FTP-FIELD TO W_FTP_DSN.
    CLEAR WA_FTP.
ENDLOOP.
CLOSE DATASET W_FTP_DSN.
ENDFORM.                    " BUILD_FTP_FILE
*&      Form TRANSFER_FTP_FILE
      text
FORM TRANSFER_FTP_FILE.
FREE TABL.
CONCATENATE 'ftp -v -n < 'W_FTP_DSN INTO W_PARCOM_LOC.
CALL 'SYSTEM' ID 'COMMAND' FIELD W_PARCOM_LOC
                ID 'TAB'     FIELD TABL-SYS.
IF W_ERROR_FLAG = '*'.
    MESSAGE I036(ZIMM).
ELSEIF W_ERROR_FLAG = 'F' .
    MESSAGE I139(ZIMM) WITH W_FNAME.
ELSE.
    MESSAGE I038(ZIMM) WITH W_FNAME.
ENDIF.
ENDFORM.                    " TRANSFER_FTP_FILE
**THE ABOVE GIVEN IS THE CODE I AM WRITING FOR THE FTP TO TRANSFER DATA FROM OUR APLICATION SERVER TO
THE REMOTE UNIX SERVER.
BUT WHEN I DO THE
CALL 'SYSTEM' ID 'COMMAND' FIELD W_PARCOM_LOC
                ID 'TAB'     FIELD TABL-SYS.
MY SYSTEM GOT HANGED AND GVES NO RESPONSE...
PLEASE HELP ME OUT AS EARLY AS POSSIBLE...
I WILL SURE U THAT U WULL REVERT BACK WITH POINTS...
PLEASE HELP...
ARE THERE ANY AUTHORISATIONS ISSUES..OR I AM DOING SOMETHING WRONG...

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Reading .txt file from remote using abap?

Hi,
I must read a .txt file from remote server automatically.
I have path and name of .txt file. Remote system asks username and password.
In abap is it possible to give username and password for reading .txt from remote server?
Remote server and sap server are not in same domain.
How can i do that?
Thanks.

Hi Cemil ,
You can try using the FM RZL_READ_FILE_REMOTE_SH.
This is an option i found , but i have really not tried it out .
Regadrs
Arun

How to get a picture from remote R/3 Server

Hi All,
         I want to show a picture on my webdynpro screen.i want to show the picture from my remote R/3 server or from my remote PC.In ABAP we can use image files from remote PC using FM - Cl_GUI_PICTURE and similar FMs . But in dynpro i cant find a way for that.
Anybody having a solution pls respond ASAP.

Hi Sareth.
Have a look:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a3/c0eb41eda96624e10000000a1550b0/content.htm
You can enter URL for source in Image Element.
Cheers,
Sascha
Message was edited by:
        Sascha Dingeldey
Message was edited by:
        Sascha Dingeldey

How to Centalize the data from remote database

we have 300-400 databases across remote server.
we want to collect the centralized inforamtion from remote server into centralized oracle database.
1.exporting the centralized data at remote server and
through FTP transfering it to central server and
importing the dump in central database
2.Creating database links and collecting data through
Snapshot
Which is best or Give any suggestion pls
if possible give detail information

Hi,
Use Proxies For Your Sender SAP System side and Use the Appropriate Adapter at Receuver side according to the Requirement
Now scenario willl be Proxy-Xi---
Logic:
1) Write the Logic inside the Proxy report to pick the records from the tables
2) And send it to Xi, Xi will routew the data to the third party System based on the adapter you selected
ABAP Proxies Pre-requisites
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Client Proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Regards
Seshagiri

Connecting from Office and Connecting from Remote

Hello
Can anyone tell me what is the difference between "Connecting from Office" and "Connecting from Remote" in the connection wizard ?
Thank you in advance

Hi Naldoo,
Into installation of SAP BPC you are specifying for application server 3 names:
Application Server Name
External Application Server Name
Virtual Name
The third one is used in case if you are using NLB.
The first one is the one using by "Connecting from Office"
The second one is used by "Connecting outside of office"
For this reason External name must be FQDN )Fully qualify name)
Application Server name can be short name
I hope this will help.
Regards
Sorin Radulescu

Extract data from remote desktop(presentation server)

Hi friends,
How to import and export data from remote desktop (presentation server) to my sap server.
I have user name password of the remote desktop(presentation server)
Please guide me.
By
Raju

Hello
Question is not clear to me...
Thank u,
santhosh

The WSDL data cannot be retrieve from remote site

I am a new guy learning web services with NetBeans 5.5 and meet some problem in retrieving wsdl data from remote site.
I create a web service "WSTestServer" at Sun Application Server PE8.2 with real IP, say 111.110.11.10:8888, and there's a class "TestWS" with a method "getWS" to return a String. The server (or machine) name is ultra20. So, by following steps in NetBeans, I can get a wsdl file after generating the web service and it can be viewed at
http://111.110.11.10:8888/WSTestServer/TestWS?WSDL
Then, I create a web service client at the same machine, it is available to test this method by clicking Web Service Reference item in NetBeans and select "getWS" method to get that String.
However, when I create a web service client at remote site, it doesn't work and show exception message like
cannot find domain http://ultra20:8888/WSTestServer/TestWS....
I go back to check wsdl file, at the last line, it prints like
<soap:address location="http://ultra20:8888/WSTestServer/TestWS".....
If I test this case in LAN, e.g., the server IP becomes 192.168.1.2 and client IP is 192.168.1.3, then it works since machine name can be recognized within the same local area network. I try to revise the wsdl file above to replace machine name as real IP, but it is automatically changed back with machine name while deploying and copy the revised one as xxx.wsdl__orig.
Should I do additional configuration setup for server site? Such as, registering a domain name like aaa.bbb.edu instead of 111.110.11.10?
Any comment and help for this subject is appreciated!!
Thank you so much!

Works as designed,from documentation:
The database also retrieves all triggers and constraints defined on the table except for referential integrity constraints that reference other tables.
The retrieved indexes, triggers, and constraints have recycle bin names. Therefore it is advisable to query the USER_RECYCLEBIN view before issuing a FLASHBACK TABLE ... TO BEFORE DROP statement so that you can rename the retrieved triggers and constraints to more usable names.
For details see the FLASHBACK TABLE command description for your unknown database version.
Werner

Unable to allow traffic from remote office - Cisco RV220W

Hi there,
I have just bought the RV220W Cisco router firewall because my DLINK-1600 got broken and now I am unable to allow access to the machines located behind this router from the machines located at a remote office. Any help would be much appreciated!!
This is the situation:
1. Two remote offices A and B connected by a VPN tunnel (this connection is managed by an external provider and it is properly functioning)
2. IP range A office: 192.168.236.0/24
3. IP range B office: 192.168.237.0/24
4. Office A: CISCO RV220W router/firewall (the one that I´ve just bought as the old dlink has broken). This RV220W is connected to a cisco router (managed by provider) that is the one with the VPN tunnel to the other office. The CISCO router does not do NAT. On the other end (Office B) there is another CISCO router managed by the provider.
5. Everything was working smoothly until our old router/firewall got broken and that is when I bought the rv220w. I have set up the CISCO RV220W at office A and the machines can ping the machines located at office B and can browse the internet, i.e., the traffic going out is OK and in that sense everything works smoothly.
6. The problem is that the machines located at office B cannot access the machines located behind the CISCO RV220W and I know it is a problem of the firewall as if I capture traffic coming from office B, I can see that it is dropped by the CISCO RV220W.
7. I have tried to enable an access rule in the firewall to allow traffic from office B (see picture below) but it does not seem to work. In the field, Send to Local Server (DNAT IP) I have entered the WAN IP of my router (you cannot leave it blank) … this rule does not work at all. I think that is not properly configured but I don´t know how to do it.
8. As you see, the problem is that I don´t know how to set up a rule to allow specific traffic coming from the WAN (traffic from remote office – 192.168.237.0/24) to the LAN at office A - 192.168.236.0/24.
In the old router/firewall I just had to create a rule specifying the source interface (WAN) and network (Office B) and the destination interdace (LANOfficeA) and network (Office A). It does not seem that here I can do the same. i mean, you always have to point to a server ip inside the LAN??
I know it has to be a very easy thing to do but at this moment I am completely stuck. If anyone can give me some advice would be great.
Thanks a lot for your help in advanced!
Eva

Hi Eva, the default inbound policy cannot be changed. It will block all inbound traffic. To my knowledge there is not a way around this. Access rules are the only way to 'poke' a hole through the firewall but as you note, it is for a specific host. Values such as .0 and .255 do not work.
-Tom
Please mark answered for helpful posts

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

Challenge: call local ejb from remote ejb on weblogic 9.2

Hi ALL,
How do I call to local ejb from remote ejb object. The jar file is deployed on weblogic server 9.2, if you want get it http://geocities.yahoo.com.br/lindembe/BEAProject.jar and the source code are http://geocities.yahoo.com.br/lindembe/BEAProject.zip. It is a sample app with two ejb that works so good on JBOSS, JOnAS, but BEA Weblogic.....
The complete problem you watch http://forum.java.sun.com/thread.jspa?threadID=768718&messageID=4387570#4387570
or
http://forums.bea.com/bea/message.jspa?messageID=600043148&tstart=0

Your code in SigemFacadeBean should just do:
InitialContext ctx = new InitialContext();
when you lookup the local EJB. (This will work on all app servers. There's no need to put an app-server specific intial context factory in your code.)
Also, you can remove the jndi-name setting for the local ejb from your weblogic-ejb-jar.xml. jndi-name is only applied to remote ejbs.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

How to read file from remote machine

Hello,
Hi, i would like to know how to read text file from remote machine using java source code, any code ?
Thanks very much;
Best regards
Kim

On the server, perform the following steps:
Parse the request and determine the file to serve
Open a FileInputStream to the appropriate file
Obtain a reference to the Servlet OutputStream
Pipe the bytes from the file to the output stream
Flush and close the streamYou might want to call HttpServletResponse.setContentType("application/octet") to indicate to the browser that a file download will be occurring. Do so before getting the reference to the Servlet's OutputStream.
- Saish

SAP from Remote

Similar Messages

Maybe you are looking for