Sap FS-CD BUSINEE PROCESS

Hello Experts ,
Could Anyone tell me the SAP FS-CD PROCESS OR SCENARIO
Thanks & Regards
Balakrishna.

Refer to
http://help.sap.com/saphelp_rm65/helpdata/EN/17/a1831c8c52a74b8a33d81f234459d0/frameset.htm
http://help.sap.com/saphelp_insu472/helpdata/en/24/0d723521faee41e10000009b38f889/frameset.htm
Regards

Similar Messages

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

SAP mmc Disp+work process to be stopped

Hi,
I installed SAP Ecc6 + oracle 10g on windows 2003, after we restart the server SAP mmc Disp+work process to be stopped.
I ran the R3trans -d, i got the below error
2EETW169 no connect possible: "DBMS = ORACLE -
oracle_sid= 'DEV;ECC'"
R3trans finished (0012).
tans.log fiel
=========
4 ETW000 [dev trc     ,00000] New connection 0 created                              30 0.006959
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              34 0.006993
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         19 0.007012
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              23 0.007035
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              31 0.007066
4 ETW000 [dbsloci.    ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in profile missing
4 ETW000                                                                              90 0.007156
2EETW169 no connect possible: "DBMS = ORACLE                           --- ORACLE_SID = 'DEV;ECC'"
sqlnet.log
========
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=sapdev)(PORT=1527))(CONNECT_DATA=(SID=DEV)(GLOBAL_NAME=DEV.WORLD)(CID=(PROGRAM=D:\usr\sap\DEV\DVEBMGS03\exe\R3trans.exe)(HOST=SAPDEV)(USER=devadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 11-DEC-2009 22:14:28
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
===================================================
please help me to resolve the issue.
thanks.

>      Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Your Oracle version is unsupported and contains serious bugs.
Read the installation guide, it tells you to
- install the Oracle software delivered on the DVD (10.2.0.1)
- install the latest patchset
- install the latest interim patches
and then start the installation.
Download now the patches for 10.2.0.4 and the interim patches and install them.
Note 839187 - Oracle 10.2.0: Applying patch set/patches/patch collection
Markus

Does SAP support open tender process for Vendor selection

Hi all,
Does SAP Support Open tendering process for Vendor Selection.
I men in my clients scenario. For vendor selection process for any material starts with advertisement of tender in newspaper. Vendor replies back with his quotation. After receiving technical and commercial quotation, the organization go for technical bidding and those who qualify in technical bidding they contest for commercial bidding. After commercial bidding, comparative statement is prepared and then purchase committee approves the vendor. The problem is that any no. of vendors from any where can give their reply to the tender as it is a government organization. So, how to map this process in SAP as we are not directly sending RFQ to the vendor, instead he reply back with quotation directly once he sees the advertisement in newspaper.
I want you all to suggest me whether to keep this process in SAP or out of SAP. waiting for your response.
Regards,
Amit

Hi Ravi,
Thanks for your response. My problem is that the organization advertise its tender in newspaper of all india circulation and seeing that tender vendor reply back with quotation. They don't identify who all are the vendors to whom RFQ is send. only when reply of vendor comes with quotation client comes to know about the vendors submitting quotation. Normally one vendor is selected for one material and 20 to 25 vendors give their quotation. Is it feasible to bring those 25 vendors in SAP if only one will be selected. Because in any way, for any processing we need to create vendor in SAP. So do we need to create 25 vendors, though we know we require only one finally. Can you please clarify this issue. If you want I can mail you the whole process map.
Thanks & Regards,
Amit

Intigrating SAP and Non-SAP system for recruitment process

Hi All,
Our Client has a requirement which is related to Recruitment.The requirement is that the employee resumes ,photos and credentils are stored in legacy system.The shortlisted resumes sud be transferred into SAP and the hiring process sud be done in SAP.After the hiring process , the status of the applicants sud be triggered in the legacy system and not in the SAP system.
Is there any Standard BAPI's for this requirement. Any Workflow is involved in this requirement.
As a HR Abaper i need to give the complete technical details for this requirement. Pls advice me on this .This is very urjent.
Points will be awarded.
Many Thanks,
Chakradhar Maddina

what is this 3rd party application?
if anyways they are using SAP for masterdata, why dont they use the same for applicant data?
ok for whatever the reason they have decided that..only way looks like is to do it manually,
create a bdc/lsmw for the hiring process and let them use it regularly for hiring all the selected applicants in a single go.
as for updating their system with the updated status, again i think they should do it manually.or maybe if their legacy system allows mass data update/chages.
becoz you do the creation of BDC/LSMW only once not everytime you want to hire.. i think its an easir process. also wait for other experts to give their feed back you may get some valuable info.
hope it helps

SAP AII for production process

Hello,
I'm an ABAP programmer but I have to find some information (integration scenario example) about using RFID for managing a production process with SAP.
I found only for SCM:
http://help.sap.com/saphelp_autoid40/helpdata/en/43/ec3b1c601f6bf1e10000000a11466f/content.htm
Is it posible to manage a production process with SAP's AII <-> XI <-> ERP like it can be done for SCM?
Thanks.
Traian

Hi Mustata,
   Yes it is very much possible to RFID enable the SAP R/3 Production process.
   AII 4.0 supported out of the box execution of Outbound delivery process and Inbound Delivery process.
   The configuration guide for same are available at this link http://service.sap.com/scm
    you can get the config guide in detailed information of RFID under SCM.
   Now answer to your question SAP AII for production process.
   AII 5.1 supports creation on new document in AII. Also the documents from backend system SAP R/3 sent to AII via XI with the help of standard document interface.
The documents related to production process can be then executed in AII with the help of RFID and after document execution in AII, if required, the document data can be sent to SAP R/3 for completion of the document in backend system.
Hope this answers your query. Do read the configuration guides.
If same process needs to be done in AII 4.0 then customisation will be need to implement the production process integration.
Thanks and regards,
Amit Deshpande

Sap script real time process

hai this is siva ,
i want sap-script real time process.

hai this is siva ,
i want sap-script real time process.

SAP for chemical industries / process industries - is indian companies are really serious into implementing ? and any recent implementations

Really want to know leading companies who has implemented or ongoing implementation of SAP erp in chemical / Process / texitles

Hi Ragu,
SAP has been implemented in 200+ chemical companies in India. SAP has been implemented in all types of chemical companies - Public sector (like Kribhco), large companies (like Tata chemicals), Mid-size companies (like Galaxy Surfactants). SAP solutions are used in all chemical industry segments (in India) - like in Petrochemicals (Haldia Petrochemicals), Fertilizers (FACT), Paints & Coatings (Asian Paints), Agrochemicals (UPL), Industrial Gases (INOX air products). Hence I can state that Indian Chemicals companies are serious and reaping benefits from SAP implementations.
Regards Manoj Narang.

"Demo on SAP EWM Quality Management Process with Storage Control" by Ganesan Srinivasan-SAP EWM Consultant -Krypt Inc-a Leading SAP Supply Chain Company USA.

"Demo on SAP EWM Quality Management Process with Storage Control" by Ganesan Srinivasan-SAP EWM Consultant -Krypt Inc-a Leading SAP Supply Chain Company USA.
http://youtu.be/1Tu9c7ecL34

Very Good Demo Navin

Issues with CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA [developer edition]

Hi,
When I want to suscribe to the CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA, on the Terms and conditions page, even if I scroll down, the button "I accept" is not available.
Do you have any tips ?

I am trying to download the SAP BPM and Operational Process Intelligence on SAP HANA [trial edition] - AWS version and get a security error.
Any ideas where we can get a 90 demo version of SAP PO/PI that will work with AWS? I am trying to refresh myself on PI7.4?

Addon is blocked by SAP on long running process...

Hi experts,
Any idea what to do when we call a .NET form that takes a long time and SAP just kicks the addon out with 3 choices ?
I've read some threads that do not give any clue that works.
I tried starting the form in another thread and this solution is very bad and gives more problem than it solves.
I tried event created in the WinForm wired on SAP side which is rised by a timer in the WinForm at interval of 30 seconds to update the main form and send a message in the StatusBar but no result. After aproximatively 10 minutes, SAP just give a message that the addon was blocked and gives 3 choices.
Since the addon is very well protected and can't crash, I don't see the real crash or error but just SAP is giving the 3 choices that's all.
I'm searching for a solution since 3 weeks now.

I'm not sure to follow you.
Actually the complexity of the .NET form is all in place and working fine even working all right with SAP excep I can't stay too long in it. if I stay let say over 10 minutes in the .NET form SAP kill the addon. Now if I stay less then 10 minutes, well everything works like a charm that means the .NET form is closing and the process that puts the line in the Sales Order takes place and all goes well.
The only problem is to make something on the SAP side to make sure a .NET form can stay opened as long as necessary.
Here's how I'm calling the .NET form :
ConfiguratorWinForm = new frmConfigurator(int.Parse(_DocNum), _KitSeq, _Handler, ActualRow, CurrentKit.Name, CurrentKit.Data, _PriceAndDiscountQuery, _CardCode);
ConfiguratorWinForm.UpAndRunningEvent += (s, ee) => { ShowProgressBar(false, 0, "", ""); };
ConfiguratorWinForm.AreYouAliveEvent += (s, ee) =>
        try
            SAPbouiCOM.Form oForm = SBO_Application.Forms.GetForm("169", 1);
            if (oForm != null)
                oForm.Update();
            if(SBO_Application.StatusBar != null)
                SBO_Application.StatusBar.SetText("Configurateur en processus...", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success);
        catch { }
ConfiguratorWinForm.btAccept.Click += (s, ee) => { IsAccepted = true; };
AddingKit = true;
// WindowAPI is jsut a handle to the GetForegroundWindow to make sure the .NET form pops in front of SAP and this works fine
ConfiguratorWinForm.ShowDialog(new CommonFramework.CustomClasses.API.WindowAPI());
ConfiguratorWinForm.SetWaitCursor();
ConfiguratorWinForm.Configurator.FocusedRow = ConfiguratorWinForm.Configurator.Rows[0];
CurrentSAPForm.Freeze(false);
if (ConfiguratorWinForm != null)
    ConfiguratorWinForm.Close();

SAP BI 7 - Background process performance Issue

This question is about efficiency of dialog process compared to inefficiency of the background process and I want suggestions from SAP Basis/BI experts on this.
We have observed that our background processes on BI server are not running as efficiently as we would like them to run.
For example
DSO activation:
When I use Dialog mode for DSO Activation with 3 parallel processes, I can activate a certain DSO with in 15 seconds. But the same DSO and the same data package when activated using background mode with 3 parallel process takes about 15 minutes.(there are plenty of background processes available on the system when this activation is running). So dialog process runs 60 times faster than background process.
In BI 7 most of the operations can be executed only in the background parallel mode. And from the activation example we know that our background processes are not as efficient as dialog processes. It
is understood that in general the background processes will not be as efficient as dialog processes, but in our case the difference is a factor of 60. We want help to identify, why the background processes are not as efficient as dialog processes. What SAP Basis settings need to be changed to make them as efficient as we can. Any suggestion or help will be highly appreciated.

Hello Eswaran
Generally a dialog process is not faster by any means than a background workprocess. Nevertheless i trust you on your observations, so there must be some difference. I just did a small test, i ran SE16 chose a big table and selected 10000 rows, i did 3 tries in dialog and 3 in background. The results:
dialog: 10.2s, 9.4s, 9.6s
background: 26s, 24s, 24s
So even in my simple example the background execution took more time. The issue here is, that the resulting output (which is pretty large) had to be saved additionally in a spool (a total of 167 pages) when executed in background. The selection of the data certainly did not take more time in either case.
The most important difference between dialog and batch processes is the memory management. Dialog processes work with a shared memory segment (extended memory). Background processes have their private heap memory.
Nevertheless, background processes are not "slower" in general, not at all. You will need to observe closer, what your processes are doing. Maybe watching SM50 while running the DSO activation is enough to see it, maybe you need to trace a process. If you see large spools generated, or huge amounts of memory consumed, we might already have an answer.
Regards
Michael

SAP GRC 10.0 Process Control - IT, HR and FICO Controls

Hi,
I need more details about GRC 10.0 Process Control - IT, HR and FICO Controls. Normally we are using standard controls in implementation. According to the business as well as industry requirements, we can create new custom controls. Can you please elaborate IT,HR and FICO controls and their significance in Process control implementation.

Dear Reddy,
as you are asking for suggestions on internal controls I would strongly recommend to check out my document in this regard.
http://scn.sap.com/docs/DOC-56548
Let me know if you have any specific question.
Regards,
Alessandro

Help with SAP notes for SD process please

i m new to Sd,
but for a urgent work, i require help,
can i have SAP NOTES relevant to SD logicistic process like, sales order,
outbound delivery, shipment,
pls pls pls help

hi
Refer to the links below.. can get useful info..
=====================================
SD Process...
PO and SO
SD Process Flow
================================
Shipment
http://help.sap.com/erp2005_ehp_02/helpdata/en/67/a417d443e511d2bf740000e8a7386f/frameset.htm
Shipment Reports
http://help.sap.com/erp2005_ehp_02/helpdata/en/76/22ea8a4c9411d2bf760000e8a7386f/frameset.htm
Creating Shipment Costs documents with work list
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/744121546011d1a7020000e829fd11/frameset.htm
Creating Shipment Costs Online
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/744114546011d1a7020000e829fd11/frameset.htm
Processing the Shipment Cost Document
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/74412e546011d1a7020000e829fd11/frameset.htm
===================
Delivery Processing
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/56078c545a11d1a7020000e829fd11/frameset.htm
PGI
http://help.sap.com/erp2005_ehp_02/helpdata/en/2a/e56de9c1a611d2b68c0000e8359890/frameset.htm
Create Transfer Order
http://help.sap.com/erp2005_ehp_02/helpdata/en/2a/e56de3c1a611d2b68c0000e8359890/frameset.htm
Outbound Delivery Group Processing
http://help.sap.com/erp2005_ehp_02/helpdata/en/4d/fb785614a6412c903fc2f18c100947/frameset.htm
Creating Outbound Delivery
http://help.sap.com/erp2005_ehp_02/helpdata/en/b0/7f2cc829bb11d5bc6e0050da59d79e/frameset.htm
Changing OutBound Delivery
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/56084f545a11d1a7020000e829fd11/frameset.htm
Deleting Outbound Delivery
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/560869545a11d1a7020000e829fd11/frameset.htm
Displaying Outbound Deliveries
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/56085c545a11d1a7020000e829fd11/frameset.htm
Outbound Delivery Group
http://help.sap.com/erp2005_ehp_02/helpdata/en/72/08a3f506924397965af2dfa42c1604/frameset.htm
Changing Outbound Delivery Groups
http://help.sap.com/erp2005_ehp_02/helpdata/en/d9/a223e8265b4c56851ae23b6b36335c/frameset.htm
=====
Sales Order Selection Criteria
http://help.sap.com/erp2005_ehp_02/helpdata/en/04/99590a141511d3b481006094b9b9dd/frameset.htm
========================
Reward if USeful
Thanx & regrads.
Naren..

Sap wms handling units process

hi
Any body tell me the process of by using with handling units in sap wms how to configure in the sales process.

Dear,
(for HU in Sales Process) http://help.sap.com/saphelp_erp2005/helpdata/en/c8/a44b7d9f3211d2858d0000e81ddea0/content.htm
(for HUM in WM)
http://help.sap.com/saphelp_ewm2007/helpdata/en/2e/d93d41d19bf623e10000000a155106/content.htm
Regards,
Syed Hussain.

Sap FS-CD BUSINEE PROCESS

Similar Messages

Maybe you are looking for