SAP Gateway failed during SAP2004S with Oracle 10.2 installation
Hi,
Oracle10.2 installation completed.
SAP installatation reached upto "Check DDIC Password" (i.e. 28 of 43)
SAP instances are up n running(from mnc I can see them green)
Now I got error as....
ERROR 2009-07-15 15:51:46
FRF-00007 Unable to open RFC connection.
ERROR 2009-07-15 16:21:27
MUT-03025 Caught ERfcExcept in Modulecall: Connect to SAP gateway failedConnect_PM GWHOST=inld50057853a, GWSERV=sapgw01, SYSNR=01
ERROR 2009-07-15 16:21:27
FCO-00011 The step runRUTTTYPSET with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost|ind|ind|ind|ind|3|0|NW_CI_Instance|ind|ind|ind|ind|16|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|runRUTTTYPSET was executed with status ERROR .
Could you please let me know what is issue here?
in /etc/services I have made entry of sapmsANK 3301/tcp
Regards,
Ankit Baphna
Edited by: I041468 on Jul 15, 2009 12:52 PM
Edited by: I041468 on Jul 15, 2009 12:58 PM
Thanks,
I can not logon to ABAP because my installation is not yet finished..I am in between installation and I can see isntancesses green.
anyways here goes dev_w0...
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_DYNPLOAD [pfxxstat.c 4105]
B
B Wed Jul 15 16:39:27 2009
B ***LOG BZA=> table D010ENH does not exist on database R/3 [dbtran#6 @ 7490] [dbtran 7490 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12999]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Wed Jul 15 16:39:27 2009
A
A Generating ABAP Program RSPOWP00 .
A Source ???????????????????????????????????????? Line 0.
A Error Code DBIF_RSQL_TABLE_UNKNOWN.
A Module $Id: //bas/700_REL/src/krn/gen/scsyenh.c#8 $ SAP.
A Function performRsqlD010enh Line 383.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_GOTO_GENEXIT
Edited by: I041468 on Jul 15, 2009 1:12 PM
Edited by: I041468 on Jul 15, 2009 1:12 PM
Edited by: I041468 on Jul 15, 2009 1:13 PM
Edited by: I041468 on Jul 15, 2009 1:14 PM
Edited by: I041468 on Jul 15, 2009 1:15 PM
and dev_rfc....
>TS> Wed Jul 15 16:45:53 2009
T:1712 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Wed Jul 15 16:45:53 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 127
Edited by: I041468 on Jul 15, 2009 1:16 PM
Similar Messages
-
Connect to SAP gateway failed during Installatio(SAP 2004s with Oracle10.2)
Hi,
I am doing SAP 2004S installation with Oracle10.2
Oracle installation completed.
SAP installation completed till step : ABAP post installation (28 out of 43 completed)
Now I am stuck in Check DDIC Password phase.
but my problem is not able to start Sap instance.
dev_rfc.trc says...
>TS> Mon Jul 13 11:34:02 2009
T:612 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Mon Jul 13 11:34:02 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 12
>TS> Mon Jul 13 11:35:03 2009
T:612 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Mon Jul 13 11:35:03 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 14
Could you please let me know what is problem here...where can I adjust gateway if it is the only problem.
Thanks,
Regards,
Ankit Baphnaalso dispatcher log says...
ue Jul 14 16:31:05 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1611]
***LOG Q0K=> DpMsAttach, mscon ( INLD50057853A) [dpxxdisp.c 11163]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 33
Release check o.K.
Tue Jul 14 16:31:45 2009
ERROR => W0 (pid 5556) died [dpxxdisp.c 13748]
ERROR => W1 (pid 2768) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 4376) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3708) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 5392) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W5 (pid 1544) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W6 (pid 3872) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5556 (SIGUSR2)
ERROR => DpWpKill(5556, SIGUSR2) failed [dpxxtool.c 2586]
killing W1-2768 (SIGUSR2)
ERROR => DpWpKill(2768, SIGUSR2) failed [dpxxtool.c 2586]
killing W2-4376 (SIGUSR2)
ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c 2586]
killing W3-3708 (SIGUSR2)
ERROR => DpWpKill(3708, SIGUSR2) failed [dpxxtool.c 2586]
killing W4-5392 (SIGUSR2)
ERROR => DpWpKill(5392, SIGUSR2) failed [dpxxtool.c 2586]
killing W5-1544 (SIGUSR2)
ERROR => DpWpKill(1544, SIGUSR2) failed [dpxxtool.c 2586]
killing W6-3872 (SIGUSR2)
ERROR => DpWpKill(3872, SIGUSR2) failed [dpxxtool.c 2586]
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1673
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 14 16:31:55 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jul 14 11:01:55 2009
========================
and syslog says...
SAPBasis:MEssage server disconnected
SAP Gateway closed
Database error: 1017 at CON
ORA01017: invalid username/password; logon denied
Which username is this referring to?
Regards,
Ankit Baphna
Edited by: I041468 on Jul 14, 2009 1:09 PM -
CJS-30196 Connect to SAP gateway failed: Error during installation
Dear Experts,
Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
ERROR 2009-08-04 08:28:43
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'node1:sapgw03' not reached
TIME Tue Aug 04 08:28:43 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
ERROR 2009-08-04 08:28:43
FCO-00011 The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
Regards,
Ritesh BhatiaHi Guys,
I am installing Ecc6 on my laptop. While installing i have got a below error...
ERROR 2012-01-24 06:58:02
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A
ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION
CPIC (TCP/IP) on local host with UnicodeERROR partner
'ecc6:sapgw04' not reachedTIME Tue Jan 24 06:58:02
2012RELEASE 700COMPONENT NI (network interface)VERSION
38RC -10MODULE nixxi.cppLINE 2764DETAIL
NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT
WSAECONNREFUSED: Connection refusedCOUNTER
ERROR 2012-01-24 06:58:02
FCO-00011 The step createJSF with step key
NW_Onehost
ind
ind
ind
ind
0
0
NW_Onehost_System
ind
ind
ind
ind
1
0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Could you please provide some solution for this?
with regards
Vinayak -
RFC logon failed with message: Failed: Connect to SAP gateway failed
I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR 2006-09-16 01:13:02
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host hostSAP, service 3309)
TIME Sat Sep 16 01:13:02 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8528
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 4
Thanks,
Ramat the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter -
Connect to Gateway Failed during database instance installation
Hi All,
I install Netweaver 2004 (6.4) ABAP stack.
I've finished the installation of oracle 10.2 and central instance. During the installation of database instance, an error happens when "starting RFC jobs".
In the logviewer:
ERROR 2007-07-02 18:37:14
FRF-00007 Unable to open RFC connection.
ERROR 2007-07-02 18:37:14
FRF-00063 RFC logon failed with message: Failed: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failedConnect_PM GWHOST=MYHOSTNAME, GWSERV=sapgw00, SYSNR=00
In \program files\sapinst_instdir\<SID>\SYSTEM\ABAP\ORA\UC\DB\dev_rfc.trc:
ERROR file opened at 20070702 183713 China Standard, SAP-REL 700,0,102 RFC-VER 3 896205 MT-SL
T:744 Error in program 'sapinst': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=<b>MYHOSTNAME(>8 characters)</b>, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.10.10:3300' not reached
TIME Mon Jul 02 18:37:13 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
>TS> Mon Jul 02 18:37:14 2007
T:744 Error in program 'sapinst': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=MYHOSTNAME GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.10.10:3300' not reached
TIME Mon Jul 02 18:37:14 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
In \usr\sap\<SID>\DVEBMGS00\work\dev_rfc.trc:
errors like this:
>TS> Mon Jul 02 18:38:05 2007
T:2284 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.NW4, GWHOST=MYHOSTNAME, GWSERV=3300
ERROR partner '10.10.10.10:3300' not reached
TIME Mon Jul 02 18:38:05 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 52
About my installation environment:
Windows XP
I've enlarged the page file size before installation.
I've looked up the info from Internet, so I've checked the following:
Under \system32\driver\etc\hosts
10.10.10.10 <domainname> <hostname> is configued as a loopback address (I was prompted to use loopback adapter when installing Oracle, because my network adapter uses DHCP)
Under \system32\driver\etc\services
sapgw00 3300/tcp # SAP System Gateway Central Instance Port
sapgw00s 4800/tcp # SAP System Gateway Security Port
I can ping 10.10.10.10 (get response)
(Any possibility that the installation user can not access 10.10.10.10:3300 ??, I don't know.)
However, I can't logged on the system, because in the MMC, "disp+work.exe" turns yellow(Dialog Queue standstill) and then becomes gray.
Some experts in some forums have commented that a long hostname (>8 characters) might be the problem. Is it true?
(I've not installed the standalone gateway instance yet. ) When do I need to install the gateway instance? Now, I installed as follows: DB software->Central Instance->DB instance.
Thanks in advance.
DennisHi,
I had a similar error, when installing SAP BW 3.1. on windows 2000 advanced server, oracle 9.2.0.6.
FRF-00007 Unable to open RFC connection.
ERROR 2006-12-04 07:03:21
FRF-00063 RFC logon failed with message: Failed
However this holds good for NW 2004 also.
To resolve this error you will need to upgrade your SAP kernel level.
1) Download the kernel. i.e. sapdbexe.sar and sapexe.sar.
2) uncar the files sapdbexe.sar and sapexe.sar using the sapcar.exe
On dos prompt go to the particular directory where u have downloaded the above sar files using "cd" command.
3) To Uncar the files use this command on dos prompt
SAPCAR -xvf <your-SAR-file> to uncar the files.
4) shut down sap using the MMC.
then in windows services.msc stop saposcol ,stop oracle service sapserviceSID and and the sapSID_##
5) Now just copy the new kernel files you have uncared above into the /usr/sap/SID/exe/run/ directory of your system
6) Start the services you stopped and start SAP using the MMC.
Now you should be able to logon. Sometimes the MMC shows the yellow status due to missing workprocess status. However the system should work fine.
Manmath Manjunath -
Rfc conn.: Connect to SAP gateway failed , edit: Group PUBLIC not found
Hello!
I want to create a RFC connection.
In the "Connection and Transport"-Tab I fill out the fields: Target Host, System Number and System ID.
If I save the destination the fields Gateway-Host and Gateway-Service will be automatically filled out with the same input value of the Target Host field.
But there is no gateway for this system and if I ping the destination the following error message is shown:
Error during ping operation: Connect to SAP gateway
failed Connect_PM TYPE=A ASHOST=sma82 SYSNR=01
WHOST=sma82 GWSERV=sma82 PCS=1 LOCATION CPIC (TCP/IP)
on local host with Unicode ERROR service sma82
unknown TIME Thu Sep 27 11:27:37 2007 RELEASE
710 COMPONENT NI (network interface) VERSION 39 RC
-3 MODULE nixxhsl.cpp LINE 643 DETAIL
NiHsLGetServNo: service name cached as unknown
COUNTER 6
How can I handle this?Hi,
I have attempted to configure the Destination with a co-worker who successfully configured a Destination to the same R/3-System but with SAP NetWeaver 2004s and not with SAP Netweaver CE 7.1 SR1.
He said that in his case he connects to the Message-Server so we activated Load Balancing.
The Message-Server will be found now but the Logon Group cant be found:
Error during ping operation: Connect to message server host failed Connect_PM TYPE=B MSHOST=xxx.xxx.xxx GROUP=PUBLIC R3NAME=TDE MSSERV=sapmsTDE PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR <b>Group PUBLIC not found</b> TIME Tue Oct 02 12:28:09 2007 RELEASE 710 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4392 DETAIL LgIGroupX COUNTER 15
But the Logon Group is PUBLIC! I checked it with SMLG.
Any ideas?
Regards,
Armin -
"Connect to SAP gateway failed" error message when we connecting bex to bw
any one can help in connecting bex with BW.
we got a error when we are trying to connect bex to bw from offshore. as we do not have basis consultant we only need to connect bex with BW.
"Connect to SAP gateway failed".
RFC_ERROR_COMMUNICATION
But it is working properly connecting to onsite team.
this is the first time we are connecting from offshore.You didnt answer the first question of when exactly are you getting this error message - during direct logon to BEx or using transaction RRMX. Anyways, I assume both are giving the error.
Check how the SAP logon pad is configured to access the BW server currently.
In our case the problem was resolved by using the server machine name instead of the IP address to logon to the BW server.
If you are currently using the IP address in the logon pad then change it to the server machine name instead.
Also, make this entry in your hosts file (windows>system32>drivers>etc>hosts) add an entry like:
<IP Address> <bw_server_machine_name>
save the file, reboot the system and then try logging onto BEx again.
If it still does not work - send me screenshots of the logon pad configuration you have for the BW server.
Hope this helps,
Regards,
Nikhil
Message was edited by: Nikhil Chowdhary -
SAP_CMINIT3 : rc=20 Connect to SAP gateway failed when connecting SAP CR
Dear SAP Gurus,
I have the follwowing issue when I try to access SAP Crystal Reports 2011 on my desktop.
I can access the SAP ERP 6.0 back-end system without problem, but when I try to connect to SAP Crystal Reports, as soon as I enter my login details, I get the following error message:
Logon Failed.
Details: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=192.12.353.12, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 192.12.353.12:3300' not reached
TIME Thu Oct 27 12:02:17 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 3
I can login to SAP Crystal Reports using other desktops, but cannot access using my own. This is the same for other people, they also cannot access using my desktop.
Thanks in advance, MarcHI Mark,
Are you and Ramish working together?
See this post for your answer: Connection keeps failing
Don -
Sol Man 4.0 Installation Error ECJS-30196 Connect to SAP gateway failed
Hi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
RahulHi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
Rahul -
Connect to SAP Gateway failed.
Hello. When I setup the databridge it errors out. When I check for processes, it shows sapmsj2e as being on port 3601 in my services file. But I can't launch a webdyn pro or access my machine with the sap gui. Any ideas?
Heres the log file snipped
352 11/16/04 1:28:12 PM [SAPEngine_Application_Thread[impl:3]_12] INFO com.sap.lcr.webui.DPBridgeServlet: Data Supplier Bridge started.
#351 11/16/04 1:28:09 PM [JCO.ServerThread-97] DEBUG com.sap.lcr.sagent.SAPProxyServer: JCO exception processed.
#350 11/16/04 1:28:09 PM [JCO.ServerThread-97] DEBUG com.sap.lcr.sagent.SAPProxyServer: On server exception: Terminated thread.
#349 11/16/04 1:28:09 PM [JCO.ServerThread-97] DEBUG com.sap.lcr.sagent.SAPProxyServer: JCO Server exception received: Server startup failed at Tue Nov 16 13:28:09 PST 2004.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds.
Could not start server: Connect to SAP gateway failed
Connect_PM TPNAME=SLD_NUC, GWHOST=orw-gharnish, GWSERV=sapmsJ2E
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner broken
TIME Tue Nov 16 13:28:09 2004
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE ninti.c
LINE 784
DETAIL NiPRead (147.34.68.157/sapmsJ2E, hdl 1)
SYSTEM CALL recv
COUNTER 88
Thrown:
com.sap.mw.jco.JCO$Exception: Server startup failed at Tue Nov 16 13:28:09 PST 2004.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds.
Could not start server: Connect to SAP gateway failed
Connect_PM TPNAME=SLD_NUC, GWHOST=orw-gharnish, GWSERV=sapmsJ2E
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner broken
TIME Tue Nov 16 13:28:09 2004
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE ninti.c
LINE 784
DETAIL NiPRead (147.34.68.157/sapmsJ2E, hdl 1)
SYSTEM CALL recv
COUNTER 88Also. If I check my bridge connections it shows this:
[DOWN] JCO/RFC server threads
Is that related to the other problem?
Thanks, Graeme. -
Connect to SAP gateway failed - internal error
Hi, I've developed a simple .NET application that connects to a SAP system and makes a function call using a SAP Connector Proxy object. Everything works fine in my workstation, but deployment doesn't. I'm also deploying the following libraries: SAP.Connector.dll, SAP.Connector.Rfc.dll and librfc32.dll.
The fact is that deployment works fine in some servers, but not in others. I've checked that .NET Framework is installed (both versions, 1.1 and 2.0). I've checked the "WINDOWS\system32\drivers\etc\services" file. What else should I check? Any idea? Every suggestion would be appreciated.
The error message is the following:
Connect to SAP gateway failed Connect_PM GWHOST=xxx.xxx.xxx.xxx, GWSERV=sapgw00, ASHOST=xxx.xxx.xxx.xxx, SYSNR=00 LOCATION CPIC (TCP/IP) on local host ERROR internal error TIME Mon Nov 13 16:23:08 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -1 COUNTER 1
And the connection string:
CLIENT=100 USER=****** PASSWD=****** LANG=EN ASHOST=xxx.xxx.xxx.xxx SYSNR=0
Thanks in advanceHi Daniel,
Can you connect to the particular system by using SAPGUI ?
if yes, then your librfc32 file is working fine.
NCo internally consumes it's functions.
Other points to check are
1> service name as appears from within the r/3 system [transaction : smgw]
2> NCo 2.0 uses .net 1.1 & nCo 2.5 uses .net 2.0, do you have both versions running parallely ?
3> gateway errors are infrastructure issues, please verify your firewall settings for the relevant protocols : http / https & also sap ports 3300 onwards.
the services file you have checked will list the ports that need to be opened on the firewall [in the case of multi - domain applications]
4> check in your 'hosts' file [same directory as your 'services' file]
This file contains the mappings of IP addresses to host names. Each
entry should be kept on an individual line. The IP address should
be placed in the first column followed by the corresponding host name.
The IP address and the host name should be separated by at least one
space.
Additionally, comments (such as these) may be inserted on individual
lines or following the machine name denoted by a '#' symbol.
For example:
102.54.94.97 rhino.acme.com # source server
38.25.63.10 x.acme.com # x client host
with respect,
amit -
Connect to SAP gateway failed Connect_PM TYPE=B
Hi experts,
I get the following error when i ping through JCO destinations on portals.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=imtsapdev01 GROUP=CLUST R3NAME=DMI MSSERV=sapmsDMI PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '127.0.0.1:3310' not reached TIME Tue Jan 27 16:39:54 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2823 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
However my JCO destinations were working perfectly until recently. I checked on the logon group. I have one called CLUST, which i use for this purpose.
I have also checked both service files and they have the following for the ECC server im connecting to.
3610 because its system number 10 i am connecting to.
sapmsDMI 3610/tcp
From the JCE destinations screen i cannot even ping the server. I can though when i log on to the server through remote desktop.
thanks and regards
dilanke
as a reply to nishants posts.
goto rz70
give hostname -->
service --> sapgw00 (sapgw(instance number)
execute it
click on yes
check rfc call (success or failed)
I have done this. i left hostname as "blank" gave service as "sapgw10"
The following is what i got as the output.
0: IMTSAPDEV01_DMI_10 : Execute program: SLDRFC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDMSGSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDIPSERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSP
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDGWSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDDBSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCOMPSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCLIENT
0: IMTSAPDEV01_DMI_10 : Execute program: SLDBCSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDAPPL_SERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDASSOC
0: IMTSAPDEV01_DMI_10 : Collection of SLD data finished
0: IMTSAPDEV01_DMI_10 : Data collected successfully
0: IMTSAPDEV01_DMI_10 : RFC data prepared
0: IMTSAPDEV01_DMI_10 : Used RFC destination: SLD_NUC
0: IMTSAPDEV01_DMI_10 : RFC call failed: Error opening an RFC connection.
0: IMTSAPDEV01_DMI_10 : Existing periodic jobs removed. Number: 1
0: IMTSAPDEV01_DMI_10 : Program scheduled: 20090127 184357
1: IMTSAPDEV01_DMI_10 : Event-controlled job already exists; scheduling not necessary
so i guess its not successful. when i look at rz70 of a server where this works correctly its not succsessful either
if it is success then technical system name will be in sld
to restart sld --> /sld --> administration --> stop server --> restart server
or check in VA --> SLD data supplier value --> Runtime
I checked this and i do not see aa problem. you have configuration status as valid and send reult as Success
Services file is locted on OS level of R3 system--> Goto --> Start --> Run -> (type)Drivers(enter) --> etc -> (here is services file)
check ur r/3 server entry is there or not,
I have the followng in the service file for the server
sapmsDMI 3610/tcp
if not add itHi Experts,
when ilook at the remote gateway properties in SMGW this is what i see on the R/3 server. ive looked at my other system which i can connect to and there isnt much of a difference in the parameters. How can test this to see if it works?
Details of remote gateway
entry = 0
state = CONNECTED
local = 1
system type = REMOTE_GATEWAY
client = FALSE
wait for frag write = 0
suspended = 0
read/write socket = 4
HANDLE = 4
TIME = Sun Oct 19 18:54:14 2008
SOCKET = 1352
STAT = NI_CONNECTED
TYPE = STREAM IPv4
OUT = 48225 messages 48225 bytes
IN = 1 messages 64 bytes
LOCAL = 127.0.0.1:3310
REMOTE = 127.0.0.1:1297
OPTIONS =
connect = Sun Oct 19 18:52:17 2008
last request = Thu Jan 29 13:09:58 2009
conversation no = 0
thanks and regards,
dilanke -
Connect to SAP gateway failed Connect_PM TYPE=A
In past 4-5 days, some of messages are not processed in our XI production server.
I got the following error in the falied messages:
Seem to be some parameter need to be update for sap gateway.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=dbcinpr SYSNR=15 GWHOST=dbcinpr GWSERV=sapgw15 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR connection to host dbcinpr, service sapgw15 timed out TIME Sun Oct 21 09:09:50 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -12 MODULE nixxi_r_mt.cpp LINE 1067 DETAIL NiPConnect COUNTER 1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
Pls let us know if it is parameter related prolem or some other issue.
Regards
AmarHi Amar!
Test the status of the RFC destinations in transaction SM59 of XI and R/3 systems.
Also check this thread, I think they might be helpful:
Communication channel not working
RFC Receiver Adapter Error
JCO Destination creation error
RFC_ERROR_COMMUNICATION - time out
Reg Jco connections
RFC Adaptive Model,JCO destinations error
Regards,
Matias
PS: please award points if helpful. -
RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
HI All,
Im getting the following error while trying to call a RFC through JCO.
{0}#1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=R3ip SYSNR=00 GWHOST=R3ip GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR hostname 'R3ip' unknown
TIME Thu May 15 12:13:36 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -2
MODULE niuxi.c
LINE 1529
DETAIL NiPGetHostByName2: hostname 'R3ip' not found
SYSTEM CALL gethostbyname_r
COUNTER 1
I know it has something to do with the entries in the services and hosts files of the portal server. Please guide me on links from help.sap.com on this.HI Dagfinn,
Very helpful answer. Thanks.
When you say :
4. Normally, the sap system should be registered in DNS, and you should need any. --- How do I check if my SAP system is registerd in the DNS? Is there some detail explaination on this.
Also,
I have these observations :
1. I checked the services file on my portal server and the entry for "sapgw00 3300/tcp" is maintained there.
2. There is no entry of my SAP ECC box in the hosts file of my portal server.
3. The group PUBLIC is not maintained in SMLG transaction.
4. I am using R3ip only in my code, there is no other place that this "R3ip" is being used.
Following is my code :
import com.sapportals.htmlb.page.*;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.event.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.resource.IResource;
import com.sapportals.portal.prt.session.*;
import java.math.*;
import java.util.*;
import java.util.Calendar;
import com.sapportals.portal.prt.service.jco.IJCOClientService;
import com.sap.mw.jco.JCO;
import com.sapportals.portal.prt.service.jco.IJCOClientPoolEntry;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.IRepository;
public class ReadModelData extends PageProcessorComponent {
public DynPage getPage(){
return new ReadModelDataDynPage();
public static class ReadModelDataDynPage extends JSPDynPage{
private class4bean class4bean = null;
protected IPortalComponentRequest request;
protected IPortalComponentSession session;
protected IPortalComponentContext context;
protected IPortalComponentProfile profile;
protected String userId;
protected String sapSystem;
private final static int INITIAL_STATE = 0;
private final static int OUTPUT_STATE = 1;
private final static int ERROR_STATE = 2;
private int state = INITIAL_STATE;
public void doInitialization(){
System.out.println("cpCv - Code is rendered: " + Calendar.getInstance().getTime().toString());
state = INITIAL_STATE;
DefaultTableViewModel tvm = new DefaultTableViewModel();
tvm = getData();
//class4bean = new class4bean();
class4bean.setModel(tvm);
session.putValue("class4bean", class4bean);
public DefaultTableViewModel getData() {
com.sap.mw.jco.IRepository repository;
JCO.Pool pool = JCO.getClientPoolManager().getPool("R3");
/* if (pool == null) {
// JCO.removeClientPool("R3");
JCO.addClientPool(
"R3",
10,
"040",
USER,
PWD,
"EN",
"R3ip",
"00");
if (pool == null) {
// JCO.removeClientPool("R3");
JCO.addClientPool(
"R3",
10,
"040",
"uname",
"pwd",
"EN",
"portalserver",
"40");
repository = JCO.createRepository("TTL", "R3");
JCO.Client client = null;
// Get a function template from the repository
IFunctionTemplate ftemplate =
repository.getFunctionTemplate("BAPI_SALESORDER_GETSTATUS");
// Create a function from the template
JCO.Function function = ftemplate.getFunction();
client = JCO.getClient("R3");
JCO.ParameterList input = function.getImportParameterList();
input.setValue("0053100700", "SALESDOCUMENT");
client.execute(function);
JCO.Table sales_orders =
function.getTableParameterList().getTable("STATUSINFO");
Vector row = new Vector();
Vector tbl = new Vector();
Vector colNames = new Vector();
// Loop over all rows
do {
// Loop over all columns in the current row
for (JCO.FieldIterator e = sales_orders.fields();
e.hasMoreElements();
JCO.Field field = e.nextField();
row.add(field.getString());
// System.out.println(field.getName() + ":\t" + field.getString());
} //for
tbl.add(row);
} while (sales_orders.nextRow());
sales_orders = null;
sales_orders =
function.getTableParameterList().getTable("STATUSINFO");
sales_orders.nextRow();
for (JCO.FieldIterator e = sales_orders.fields();
e.hasMoreElements();
JCO.Field field = e.nextField();
colNames.add(field.getName().toString());
DefaultTableViewModel dtvModel = new DefaultTableViewModel(tbl, colNames);
JCO.releaseClient(client);
return dtvModel;
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
class4bean myBean = new class4bean();
((IPortalComponentRequest)getRequest()).getServletRequest().setAttribute("myBean", myBean);
// fill your bean with data here...
this.setJspName("testJSP_.jsp"); -
SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
Hi,
I need to find out whether it's possible to install SAP R/3 4.6C
with Oracle 9.2 on a Windows 2003 - Server.
Is is only possible to install this sap-system with Oracle 8.1.7 on a Windows 2000-Server? Or are there some other ways?
If no, please tell me the possibilities for the correct installation of the desired sap-system.
Awaiting for your feedback.
Kind Regards->SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
GreetZ, AH
Maybe you are looking for
-
Issue Putting Data from ArrayCollection into List
I'm having trouble getting data that has been pulled from a textArea and put into an ArrayCollection to be displayed in a List. The data is being saved and then read as a file from local storage. When I run the application, nothing appears in the c
-
Can't get java runtime, and applets, running inside Firefox 11.
I have gone to my Windows 7 control panel and enabled java for the mozilla family, which implies the web browser I use, Firefox 11 at the moment. I have gone to Firefox/Tools/Add-Ons/Plugins and have enabled the Java Deployment Kit 6.0.250.3 However,
-
Hi all, We are upgrading 11i to r12, here my job is to find all the key tables of AP and AR modules and later use them in rdf reports. I found many tables from many blogs. I am confused. Please tell me the best way of getting this information. Regard
-
Problem with shared services,, cannot load "assign access control"
i m using 11.1.1.3 version of EPM. I have configured Essbase with Shared Services. When I do right click on application on shared services and select "Assign Access Control" , it gives "loading.." .it remains same for hours.. I re configured essbase
-
Increase Shared Pool for erorr # ORA-04031
hi, what do i need to look at before i increase the shared pool of our database? there is just the one database instance on the machine. i am concerned about the repurcussions on the server. i hope the information below is of help. db version: 10.2.0